* [PATCH v11 00/11] Add VIRTIO sound card
@ 2023-10-11 14:34 Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 01/11] Add virtio-sound device stub Manos Pitsidianakis
` (11 more replies)
0 siblings, 12 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
This patch series adds an audio device implementing the recent virtio
sound spec (1.2) and a corresponding PCI wrapper device.
v11 can be found online at:
https://gitlab.com/epilys/qemu/-/tree/virtio-snd-v11
Ref 885b01fe272541fdab5583780d4c3a59bfd8e734
Main differences with v10 patch series [^v10]
<cover.1695996196.git.manos.pitsidianakis@linaro.org>:
- Rebased against upstream, which has minor changes to the AUD_* API.
- Fixed noise in playback because of invalid bounds when accessing the
audio data in the VirtQueueElement.
- Refactor invalid I/O message queue flushing into separate function.
- Removed attempt to write unwritten bytes to QEMU sound backend when
flushing: it should only happen when the stream STARTs.
- Set latency_bytes to buffer size when returning TX I/O message because
it happens immediately after writing the last bytes to the QEMU
backend, therefore there might be up to <buffer size> bytes to be
played before all the buffer data has finished playing.
- Addressed [^v10] review comments:
- Refactored VirtIOSoundPCMBuffer return code into a function instead
of using goto labels in output/input audio callbacks. (Suggested by
<philmd@linaro.org>)
Previously:
[^v10]:
https://lore.kernel.org/qemu-devel/cover.1695996196.git.manos.pitsidianakis@linaro.org/
[^v9]:
https://lore.kernel.org/qemu-devel/cover.1694588927.git.manos.pitsidianakis@linaro.org/
[^v8]:
https://lore.kernel.org/qemu-devel/cover.1693252037.git.manos.pitsidianakis@linaro.org/
[^v7]:
https://lore.kernel.org/qemu-devel/cover.1692731646.git.manos.pitsidianakis@linaro.org/
[^v6]:
https://lore.kernel.org/qemu-devel/cover.1692089917.git.manos.pitsidianakis@linaro.org/
[^v5]:
https://lore.kernel.org/qemu-devel/cover.1690626150.git.manos.pitsidianakis@linaro.org/
[^v4]:
https://lore.kernel.org/qemu-devel/cover.1689857559.git.manos.pitsidianakis@linaro.org/
[^v3]:
https://lore.kernel.org/qemu-devel/cover.1689692765.git.manos.pitsidianakis@linaro.org/
Emmanouil Pitsidianakis (11):
Add virtio-sound device stub
Add virtio-sound-pci device
virtio-sound: handle control messages and streams
virtio-sound: handle VIRTIO_SND_R_PCM_INFO request
virtio-sound: handle VIRTIO_SND_R_PCM_{START,STOP}
virtio-sound: handle VIRTIO_SND_R_PCM_SET_PARAMS
virtio-sound: handle VIRTIO_SND_R_PCM_PREPARE
virtio-sound: handle VIRTIO_SND_R_PCM_RELEASE
virtio-sound: implement audio output (TX)
virtio-sound: implement audio capture (RX)
docs/system: add basic virtio-snd documentation
MAINTAINERS | 7 +
docs/system/device-emulation.rst | 1 +
docs/system/devices/virtio-snd.rst (new) | 49 +
hw/virtio/Kconfig | 5 +
hw/virtio/meson.build | 2 +
hw/virtio/trace-events | 20 +
hw/virtio/virtio-snd-pci.c (new) | 93 ++
hw/virtio/virtio-snd.c (new) | 1409 ++++++++++++++++++++++
include/hw/virtio/virtio-snd.h (new) | 235 ++++
system/qdev-monitor.c | 1 +
10 files changed, 1822 insertions(+)
create mode 100644 docs/system/devices/virtio-snd.rst
create mode 100644 hw/virtio/virtio-snd-pci.c
create mode 100644 hw/virtio/virtio-snd.c
create mode 100644 include/hw/virtio/virtio-snd.h
Range-diff against v10:
1: 6e7bdf6dda ! 1: 03ecf1f615 Add virtio-sound device stub
@@ hw/virtio/virtio-snd.c (new)
+ return;
+ }
+
-+ AUD_register_card("virtio-sound", &vsnd->card);
++ AUD_register_card("virtio-sound", &vsnd->card, errp);
+
+ vsnd->queues[VIRTIO_SND_VQ_CONTROL] =
+ virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
2: 82138b9c7d ! 2: ba49f45eb3 Add virtio-sound-pci device
@@ hw/virtio/virtio-snd.c: virtio_snd_set_config(VirtIODevice *vdev, const uint8_t
/*
- ## softmmu/qdev-monitor.c ##
-@@ softmmu/qdev-monitor.c: static const QDevAlias qdev_alias_table[] = {
+ ## system/qdev-monitor.c ##
+@@ system/qdev-monitor.c: static const QDevAlias qdev_alias_table[] = {
{ "virtio-serial-device", "virtio-serial", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-serial-ccw", "virtio-serial", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-serial-pci", "virtio-serial", QEMU_ARCH_VIRTIO_PCI},
3: c1a2cb0304 ! 3: 5831b5cfa5 virtio-sound: handle control messages and streams
@@ hw/virtio/virtio-snd.c: static void virtio_snd_realize(DeviceState *dev, Error *
@@ hw/virtio/virtio-snd.c: static void virtio_snd_realize(DeviceState *dev, Error **errp)
- AUD_register_card("virtio-sound", &vsnd->card);
+ AUD_register_card("virtio-sound", &vsnd->card, errp);
+ /* set default params for all streams */
+ default_params.features = 0;
4: 28b2ecfa1f = 4: 425cbc2986 virtio-sound: handle VIRTIO_SND_R_PCM_INFO request
5: a52d20b2c3 = 5: d1403721fa virtio-sound: handle VIRTIO_SND_R_PCM_{START,STOP}
6: 25fbb2eb25 = 6: 68ac43df35 virtio-sound: handle VIRTIO_SND_R_PCM_SET_PARAMS
7: 9e8d9923ba = 7: 175e6fbe75 virtio-sound: handle VIRTIO_SND_R_PCM_PREPARE
8: b50c94decc = 8: 93a5b96b58 virtio-sound: handle VIRTIO_SND_R_PCM_RELEASE
9: 4cbb908742 ! 9: 34be52e56e virtio-sound: implement audio output (TX)
@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_event(VirtIODevice *vdev,
+ if (!virtio_queue_ready(vq)) {
+ return;
+ }
-+ trace_virtio_snd_handle_tx_xfer();
++ trace_virtio_snd_handle_xfer();
+
+ for (;;) {
+ elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_event(VirtIODevice *vdev,
+ }
+
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
-+ size = iov_size(elem->out_sg, elem->out_num);
++ size = iov_size(elem->out_sg, elem->out_num) - msg_sz;
+
+ buffer = g_malloc0(sizeof(VirtIOSoundPCMBuffer) + size);
+ buffer->elem = elem;
-+ buffer->stale = true;
++ buffer->populated = false;
+ buffer->vq = vq;
+ buffer->size = size;
-+ buffer->offset = sizeof(virtio_snd_pcm_xfer);
++ buffer->offset = 0;
+
+ QSIMPLEQ_INSERT_TAIL(&stream->queue, buffer, entry);
+ }
@@ hw/virtio/virtio-snd.c: static void virtio_snd_realize(DeviceState *dev, Error *
}
}
++static inline void return_tx_buffer(VirtIOSoundPCMStream *stream,
++ VirtIOSoundPCMBuffer *buffer)
++{
++ virtio_snd_pcm_status resp = { 0 };
++ resp.status = cpu_to_le32(VIRTIO_SND_S_OK);
++ resp.latency_bytes = cpu_to_le32((uint32_t)buffer->size);
++ iov_from_buf(buffer->elem->in_sg,
++ buffer->elem->in_num,
++ 0,
++ &resp,
++ sizeof(virtio_snd_pcm_status));
++ virtqueue_push(buffer->vq,
++ buffer->elem,
++ sizeof(virtio_snd_pcm_status));
++ virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq);
++ QSIMPLEQ_REMOVE(&stream->queue,
++ buffer,
++ VirtIOSoundPCMBuffer,
++ entry);
++ virtio_snd_pcm_buffer_free(buffer);
++}
++
+/*
+ * AUD_* output callback.
+ *
@@ hw/virtio/virtio-snd.c: static void virtio_snd_realize(DeviceState *dev, Error *
+ }
+ if (!stream->active) {
+ /* Stream has stopped, so do not perform AUD_write. */
-+ goto return_tx_buffer;
++ return_tx_buffer(stream, buffer);
++ continue;
+ }
-+ if (buffer->stale) {
++ if (!buffer->populated) {
+ iov_to_buf(buffer->elem->out_sg,
+ buffer->elem->out_num,
-+ buffer->offset,
++ sizeof(virtio_snd_pcm_xfer),
+ buffer->data,
+ buffer->size);
-+ buffer->stale = false;
++ buffer->populated = true;
+ }
+ for (;;) {
+ size = AUD_write(stream->voice.out,
@@ hw/virtio/virtio-snd.c: static void virtio_snd_realize(DeviceState *dev, Error *
+ buffer->offset += size;
+ available -= size;
+ if (buffer->size < 1) {
-+return_tx_buffer:
-+ virtio_snd_pcm_status resp = { 0 };
-+ resp.status = cpu_to_le32(VIRTIO_SND_S_OK);
-+ resp.latency_bytes = 0;
-+ iov_from_buf(buffer->elem->in_sg,
-+ buffer->elem->in_num,
-+ 0,
-+ &resp,
-+ sizeof(virtio_snd_pcm_status));
-+ virtqueue_push(buffer->vq,
-+ buffer->elem,
-+ sizeof(virtio_snd_pcm_status));
-+ virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq);
-+ QSIMPLEQ_REMOVE_HEAD(&stream->queue, entry);
-+ virtio_snd_pcm_buffer_free(buffer);
++ return_tx_buffer(stream, buffer);
+ break;
+ }
+ if (!available) {
@@ hw/virtio/virtio-snd.c: static void virtio_snd_realize(DeviceState *dev, Error *
+ *
+ * @stream: VirtIOSoundPCMStream *stream
+ */
-+static void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream)
++static inline void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream)
+{
-+ VirtIOSoundPCMBuffer *buffer, *next;
++ VirtIOSoundPCMBuffer *buffer;
+
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
-+ QSIMPLEQ_FOREACH_SAFE(buffer, &stream->queue, entry, next) {
-+ AUD_write(stream->voice.out,
-+ buffer->data + buffer->offset,
-+ buffer->size);
-+ virtqueue_push(buffer->vq,
-+ buffer->elem,
-+ sizeof(VirtQueueElement));
-+ virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq);
-+ QSIMPLEQ_REMOVE(&stream->queue,
-+ buffer,
-+ VirtIOSoundPCMBuffer,
-+ entry);
-+ virtio_snd_pcm_buffer_free(buffer);
++ while (!QSIMPLEQ_EMPTY(&stream->queue)) {
++ buffer = QSIMPLEQ_FIRST(&stream->queue);
++ return_tx_buffer(stream, buffer);
+ }
+ }
+}
@@ include/hw/virtio/virtio-snd.h: typedef struct virtio_snd_ctrl_command virtio_sn
+ *
+ * In the case of TX (i.e. playback) buffers, we defer reading the raw PCM data
+ * from the virtqueue until QEMU's sound backsystem calls the output callback.
-+ * This is tracked by the `bool stale;` field, which is set to false when data
-+ * has been read into our own buffer for consumption.
++ * This is tracked by the `bool populated;` field, which is set to true when
++ * data has been read into our own buffer for consumption.
+ *
+ * VirtIOSoundPCMBuffer has a dynamic size since it includes the raw PCM data
+ * in its allocation. It must be initialized and destroyed as follows:
@@ include/hw/virtio/virtio-snd.h: typedef struct virtio_snd_ctrl_command virtio_sn
+ */
+ uint64_t offset;
+ /* Used for the TX queue for lazy I/O copy from `elem` */
-+ bool stale;
++ bool populated;
+ /*
+ * VirtIOSoundPCMBuffer is an unsized type because it ends with an array of
+ * bytes. The size of `data` is determined from the I/O message's read-only
10: 992b0d5ff4 ! 10: 68f9e0f298 virtio-sound: implement audio capture (RX)
@@ hw/virtio/virtio-snd.c
static void virtio_snd_pcm_out_cb(void *data, int available);
static void virtio_snd_process_cmdq(VirtIOSound *s);
--static void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream);
-+static void virtio_snd_pcm_out_flush(VirtIOSoundPCMStream *stream);
-+static void virtio_snd_pcm_in_flush(VirtIOSoundPCMStream *stream);
+ static void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream);
+static void virtio_snd_pcm_in_cb(void *data, int available);
static uint32_t supported_formats = BIT(VIRTIO_SND_PCM_FMT_S8)
| BIT(VIRTIO_SND_PCM_FMT_U8)
-@@ hw/virtio/virtio-snd.c: static void virtio_snd_pcm_close(VirtIOSoundPCMStream *stream)
+@@ hw/virtio/virtio-snd.c: static void virtio_snd_get_qemu_audsettings(audsettings *as,
+ static void virtio_snd_pcm_close(VirtIOSoundPCMStream *stream)
{
if (stream) {
++ virtio_snd_pcm_flush(stream);
if (stream->info.direction == VIRTIO_SND_D_OUTPUT) {
- virtio_snd_pcm_flush(stream);
-+ virtio_snd_pcm_out_flush(stream);
AUD_close_out(&stream->pcm->snd->card, stream->voice.out);
stream->voice.out = NULL;
+ } else if (stream->info.direction == VIRTIO_SND_D_INPUT) {
-+ virtio_snd_pcm_in_flush(stream);
+ AUD_close_in(&stream->pcm->snd->card, stream->voice.in);
+ stream->voice.in = NULL;
}
@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_pcm_start_stop(VirtIOSound
}
} else {
error_report("Invalid stream id: %"PRIu32, stream_id);
-@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_pcm_release(VirtIOSound *s,
- * are pending I/O messages for the specified stream ID.
- */
- trace_virtio_snd_pcm_stream_flush(stream_id);
-- virtio_snd_pcm_flush(stream);
-+ if (stream->info.direction == VIRTIO_SND_D_OUTPUT) {
-+ virtio_snd_pcm_out_flush(stream);
-+ } else {
-+ virtio_snd_pcm_in_flush(stream);
-+ }
- }
+@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_event(VirtIODevice *vdev, VirtQueue *vq)
+ trace_virtio_snd_handle_event();
+ }
- cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
++static inline void empty_invalid_queue(VirtIODevice *vdev, VirtQueue *vq)
++{
++ VirtIOSoundPCMBuffer *buffer = NULL;
++ VirtIOSoundPCMStream *stream = NULL;
++ virtio_snd_pcm_status resp = { 0 };
++ VirtIOSound *vsnd = VIRTIO_SND(vdev);
++ bool any = false;
++
++ for (uint32_t i = 0; i < vsnd->snd_conf.streams; i++) {
++ stream = vsnd->pcm->streams[i];
++ if (stream) {
++ any = false;
++ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
++ while (!QSIMPLEQ_EMPTY(&stream->invalid)) {
++ buffer = QSIMPLEQ_FIRST(&stream->invalid);
++ if (buffer->vq != vq) {
++ break;
++ }
++ any = true;
++ resp.status = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
++ iov_from_buf(buffer->elem->in_sg,
++ buffer->elem->in_num,
++ 0,
++ &resp,
++ sizeof(virtio_snd_pcm_status));
++ virtqueue_push(vq,
++ buffer->elem,
++ sizeof(virtio_snd_pcm_status));
++ QSIMPLEQ_REMOVE_HEAD(&stream->invalid, entry);
++ virtio_snd_pcm_buffer_free(buffer);
++ }
++ if (any) {
++ /*
++ * Notify vq about virtio_snd_pcm_status responses.
++ * Buffer responses must be notified separately later.
++ */
++ virtio_notify(vdev, vq);
++ }
++ }
++ }
++ }
++}
++
+ /*
+ * The tx virtqueue handler. Makes the buffers available to their respective
+ * streams for consumption.
@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_event(VirtIODevice *vdev, VirtQueue *vq)
* @vdev: VirtIOSound device
* @vq: tx virtqueue
@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_event(VirtIODevice *vdev,
{
VirtIOSound *s = VIRTIO_SND(vdev);
VirtIOSoundPCMStream *stream = NULL;
+@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_tx(VirtIODevice *vdev, VirtQueue *vq)
+ VirtQueueElement *elem;
+ size_t msg_sz, size;
+ virtio_snd_pcm_xfer hdr;
+- virtio_snd_pcm_status resp = { 0 };
+ uint32_t stream_id;
+ /*
+ * If any of the I/O messages are invalid, put them in stream->invalid and
+@@ hw/virtio/virtio-snd.c: static void virtio_snd_handle_tx(VirtIODevice *vdev, VirtQueue *vq)
+ if (!virtio_queue_ready(vq)) {
+ return;
+ }
+- trace_virtio_snd_handle_xfer();
++ trace_virtio_snd_handle_tx_xfer();
+
+ for (;;) {
+ elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
@@ hw/virtio/virtio-snd.c: tx_err:
+ }
+
+ if (must_empty_invalid_queue) {
+- WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+- while (!QSIMPLEQ_EMPTY(&stream->invalid)) {
+- buffer = QSIMPLEQ_FIRST(&stream->invalid);
+-
+- resp.status = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+- iov_from_buf(buffer->elem->in_sg,
+- buffer->elem->in_num,
+- 0,
+- &resp,
+- sizeof(virtio_snd_pcm_status));
+- virtqueue_push(vq, buffer->elem, sizeof(virtio_snd_pcm_status));
+- QSIMPLEQ_REMOVE_HEAD(&stream->invalid, entry);
+- virtio_snd_pcm_buffer_free(buffer);
+- }
+- /*
+- * Notify vq about virtio_snd_pcm_status responses.
+- * Buffer responses must be notified separately later.
+- */
+- virtio_notify(vdev, vq);
+- }
++ empty_invalid_queue(vdev, vq);
+ }
}
/*
@@ hw/virtio/virtio-snd.c: tx_err:
*
* @vdev: VirtIOSound device
- * @vq: virtqueue
-+ * @vq: tx virtqueue
++ * @vq: rx virtqueue
*/
-static void virtio_snd_handle_xfer(VirtIODevice *vdev, VirtQueue *vq) {}
+static void virtio_snd_handle_rx_xfer(VirtIODevice *vdev, VirtQueue *vq)
@@ hw/virtio/virtio-snd.c: tx_err:
+ VirtQueueElement *elem;
+ size_t msg_sz, size;
+ virtio_snd_pcm_xfer hdr;
-+ virtio_snd_pcm_status resp = { 0 };
+ uint32_t stream_id;
+ /*
+ * if any of the I/O messages are invalid, put them in stream->invalid and
@@ hw/virtio/virtio-snd.c: tx_err:
+ }
+
+ if (must_empty_invalid_queue) {
-+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
-+ while (!QSIMPLEQ_EMPTY(&stream->invalid)) {
-+ buffer = QSIMPLEQ_FIRST(&stream->invalid);
-+
-+ resp.status = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
-+ iov_from_buf(buffer->elem->in_sg,
-+ buffer->elem->in_num,
-+ 0,
-+ &resp,
-+ sizeof(virtio_snd_pcm_status));
-+ virtqueue_push(vq, buffer->elem, sizeof(virtio_snd_pcm_status));
-+ QSIMPLEQ_REMOVE_HEAD(&stream->invalid, entry);
-+ virtio_snd_pcm_buffer_free(buffer);
-+ }
-+ /*
-+ * Notify vq about virtio_snd_pcm_status responses.
-+ * Buffer responses must be notified separately later.
-+ */
-+ virtio_notify(vdev, vq);
-+ }
++ empty_invalid_queue(vdev, vq);
+ }
+}
@@ hw/virtio/virtio-snd.c: static void virtio_snd_realize(DeviceState *dev, Error *
qemu_mutex_init(&vsnd->cmdq_mutex);
QTAILQ_INIT(&vsnd->cmdq);
-@@ hw/virtio/virtio-snd.c: return_tx_buffer:
+@@ hw/virtio/virtio-snd.c: static void virtio_snd_pcm_out_cb(void *data, int available)
}
/*
- * Flush all buffer data from this stream's queue into the driver's virtual
- * queue.
++ * Flush all buffer data from this input stream's queue into the driver's
++ * virtual queue.
++ *
++ * @stream: VirtIOSoundPCMStream *stream
++ */
++static inline void return_rx_buffer(VirtIOSoundPCMStream *stream,
++ VirtIOSoundPCMBuffer *buffer)
++{
++ virtio_snd_pcm_status resp = { 0 };
++ resp.status = cpu_to_le32(VIRTIO_SND_S_OK);
++ resp.latency_bytes = 0;
++ /* Copy data -if any- to guest */
++ iov_from_buf(buffer->elem->in_sg,
++ buffer->elem->in_num,
++ 0,
++ buffer->data,
++ buffer->size);
++ iov_from_buf(buffer->elem->in_sg,
++ buffer->elem->in_num,
++ buffer->size,
++ &resp,
++ sizeof(virtio_snd_pcm_status));
++ virtqueue_push(buffer->vq,
++ buffer->elem,
++ sizeof(virtio_snd_pcm_status) + buffer->size);
++ virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq);
++ QSIMPLEQ_REMOVE(&stream->queue,
++ buffer,
++ VirtIOSoundPCMBuffer,
++ entry);
++ virtio_snd_pcm_buffer_free(buffer);
++}
++
++
++/*
+ * AUD_* input callback.
- *
-- * @stream: VirtIOSoundPCMStream *stream
++ *
+ * @data: VirtIOSoundPCMStream stream
+ * @available: number of bytes that can be read with AUD_read()
- */
--static void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream)
++ */
+static void virtio_snd_pcm_in_cb(void *data, int available)
- {
-- VirtIOSoundPCMBuffer *buffer, *next;
++{
+ VirtIOSoundPCMStream *stream = data;
+ VirtIOSoundPCMBuffer *buffer;
-+ virtio_snd_pcm_status resp = { 0 };
+ size_t size;
-
- WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
-- QSIMPLEQ_FOREACH_SAFE(buffer, &stream->queue, entry, next) {
-- AUD_write(stream->voice.out,
-- buffer->data + buffer->offset,
-- buffer->size);
-- virtqueue_push(buffer->vq,
-- buffer->elem,
-- sizeof(VirtQueueElement));
-- virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq);
-- QSIMPLEQ_REMOVE(&stream->queue,
-- buffer,
-- VirtIOSoundPCMBuffer,
-- entry);
-- virtio_snd_pcm_buffer_free(buffer);
++
++ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ while (!QSIMPLEQ_EMPTY(&stream->queue)) {
+ buffer = QSIMPLEQ_FIRST(&stream->queue);
+ if (!virtio_queue_ready(buffer->vq)) {
@@ hw/virtio/virtio-snd.c: return_tx_buffer:
+ }
+ if (!stream->active) {
+ /* Stream has stopped, so do not perform AUD_read. */
-+ goto return_rx_buffer;
++ return_rx_buffer(stream, buffer);
++ continue;
+ }
+
+ for (;;) {
@@ hw/virtio/virtio-snd.c: return_tx_buffer:
+ buffer->size += size;
+ available -= size;
+ if (buffer->size >= stream->params.period_bytes) {
-+return_rx_buffer:
-+ resp.status = cpu_to_le32(VIRTIO_SND_S_OK);
-+ resp.latency_bytes = 0;
-+ /* Copy data -if any- to guest */
-+ iov_from_buf(buffer->elem->in_sg,
-+ buffer->elem->in_num,
-+ 0,
-+ buffer->data,
-+ buffer->size);
-+ iov_from_buf(buffer->elem->in_sg,
-+ buffer->elem->in_num,
-+ buffer->size,
-+ &resp,
-+ sizeof(resp));
-+ virtqueue_push(buffer->vq,
-+ buffer->elem,
-+ sizeof(virtio_snd_pcm_status) +
-+ buffer->size);
-+ virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq);
-+ QSIMPLEQ_REMOVE_HEAD(&stream->queue, entry);
-+ virtio_snd_pcm_buffer_free(buffer);
++ return_rx_buffer(stream, buffer);
+ break;
+ }
+ if (!available) {
@@ hw/virtio/virtio-snd.c: return_tx_buffer:
+ if (!available) {
+ break;
+ }
- }
- }
- }
-
-+#define virtio_snd_pcm_flush(AUD_CB) \
-+ VirtIOSoundPCMBuffer *buffer; \
-+ virtio_snd_pcm_status resp = { 0 }; \
-+ unsigned int len = 0; \
-+ resp.status = cpu_to_le32(VIRTIO_SND_S_OK); \
-+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) { \
-+ while (!QSIMPLEQ_EMPTY(&stream->queue)) { \
-+ buffer = QSIMPLEQ_FIRST(&stream->queue); \
-+ do { \
-+ AUD_CB; \
-+ } while (0) \
-+ ; \
-+ virtqueue_push(buffer->vq, buffer->elem, len); \
-+ virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq); \
-+ QSIMPLEQ_REMOVE_HEAD(&stream->queue, entry); \
-+ virtio_snd_pcm_buffer_free(buffer); \
-+ } \
++ }
+ }
-+
-+
-+/*
-+ * Flush all buffer data from this output stream's queue into the driver's
-+ * virtual queue.
-+ *
-+ * @stream: VirtIOSoundPCMStream *stream
-+ */
-+static void virtio_snd_pcm_out_flush(VirtIOSoundPCMStream *stream)
-+{
-+ /*
-+ * We should flush the buffers as soon as possible, because it is a
-+ * time-sensitive operation.
-+ *
-+ * TODO: find out if copying leftover flushed data to an intermediate
-+ * buffer is a good approach.
-+ */
-+ size_t written;
-+ virtio_snd_pcm_flush(
-+ if (stream->active && buffer->stale) {
-+ iov_to_buf(buffer->elem->out_sg,
-+ buffer->elem->out_num,
-+ buffer->offset,
-+ buffer->data,
-+ buffer->size);
-+ buffer->stale = false;
-+ }
-+ if (stream->active)
-+ while (buffer->size > 0) {
-+ written = AUD_write(stream->voice.out,
-+ buffer->data + buffer->offset,
-+ buffer->size);
-+ if (written < 1) {
-+ break;
-+ }
-+ buffer->size -= written;
-+ buffer->offset += written;
-+ }
-+ len = sizeof(virtio_snd_pcm_status);
-+ iov_from_buf(buffer->elem->in_sg,
-+ buffer->elem->in_num,
-+ 0,
-+ &resp,
-+ sizeof(virtio_snd_pcm_status));
-+ );
+}
+
+/*
-+ * Flush all buffer data from this input stream's queue into the driver's
++ * Flush all buffer data from this output stream's queue into the driver's
+ * virtual queue.
-+ *
-+ * @stream: VirtIOSoundPCMStream *stream
-+ */
-+static void virtio_snd_pcm_in_flush(VirtIOSoundPCMStream *stream)
-+{
-+ virtio_snd_pcm_flush(
-+ len = sizeof(virtio_snd_pcm_status) + buffer->size;
-+ iov_from_buf(buffer->elem->in_sg,
-+ buffer->elem->in_num,
-+ 0,
-+ buffer->data,
-+ buffer->size);
-+ iov_from_buf(buffer->elem->in_sg,
-+ buffer->elem->in_num,
-+ buffer->size,
-+ &resp,
-+ sizeof(virtio_snd_pcm_status));
-+ );
-+}
-+
- static void virtio_snd_unrealize(DeviceState *dev)
+ *
+ * @stream: VirtIOSoundPCMStream *stream
+ */
+ static inline void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream)
{
- VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VirtIOSoundPCMBuffer *buffer;
++ void (*cb)(VirtIOSoundPCMStream *, VirtIOSoundPCMBuffer *) =
++ (stream->info.direction == VIRTIO_SND_D_OUTPUT) ? return_tx_buffer :
++ return_rx_buffer;
+
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ while (!QSIMPLEQ_EMPTY(&stream->queue)) {
+ buffer = QSIMPLEQ_FIRST(&stream->queue);
+- return_tx_buffer(stream, buffer);
++ cb(stream, buffer);
+ }
+ }
+ }
11: b720e00121 = 11: 885b01fe27 docs/system: add basic virtio-snd documentation
base-commit: cea3ea670fe265421131aad90c36fbb87bc4d206
--
2.39.2
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v11 01/11] Add virtio-sound device stub
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 02/11] Add virtio-sound-pci device Manos Pitsidianakis
` (10 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Add a new VIRTIO device for the virtio sound device id. Functionality
will be added in the following commits.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
---
MAINTAINERS | 6 +
hw/virtio/Kconfig | 5 +
hw/virtio/meson.build | 1 +
hw/virtio/trace-events | 9 ++
hw/virtio/virtio-snd.c (new) | 223 +++++++++++++++++++++++++++
include/hw/virtio/virtio-snd.h (new) | 79 ++++++++++
6 files changed, 323 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9e7dec4a58..701f12026a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2254,6 +2254,12 @@ F: hw/virtio/virtio-mem-pci.h
F: hw/virtio/virtio-mem-pci.c
F: include/hw/virtio/virtio-mem.h
+virtio-snd
+M: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
+S: Supported
+F: hw/virtio/virtio-snd*.c
+F: include/hw/virtio/virtio-snd.h
+
nvme
M: Keith Busch <kbusch@kernel.org>
M: Klaus Jensen <its@irrelevant.dk>
diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
index 92c9cf6c96..d6f20657b3 100644
--- a/hw/virtio/Kconfig
+++ b/hw/virtio/Kconfig
@@ -17,6 +17,11 @@ config VIRTIO_PCI
depends on PCI
select VIRTIO
+config VIRTIO_SND
+ bool
+ default y
+ depends on VIRTIO
+
config VIRTIO_MMIO
bool
select VIRTIO
diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
index c0055a7832..d0572b298c 100644
--- a/hw/virtio/meson.build
+++ b/hw/virtio/meson.build
@@ -35,6 +35,7 @@ specific_virtio_ss.add(when: 'CONFIG_VHOST_VSOCK', if_true: files('vhost-vsock.c
specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_VSOCK', if_true: files('vhost-user-vsock.c'))
specific_virtio_ss.add(when: 'CONFIG_VIRTIO_RNG', if_true: files('virtio-rng.c'))
specific_virtio_ss.add(when: 'CONFIG_VIRTIO_MEM', if_true: files('virtio-mem.c'))
+specific_virtio_ss.add(when: 'CONFIG_VIRTIO_SND', if_true: files('virtio-snd.c'))
specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C', if_true: files('vhost-user-i2c.c'))
specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true: files('vhost-user-rng.c'))
specific_virtio_ss.add(when: 'CONFIG_VHOST_USER_GPIO', if_true: files('vhost-user-gpio.c'))
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 1cb9027d1e..96b997f427 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -154,3 +154,12 @@ virtio_pmem_flush_done(int type) "fsync return=%d"
virtio_gpio_start(void) "start"
virtio_gpio_stop(void) "stop"
virtio_gpio_set_status(uint8_t status) "0x%x"
+
+#virtio-snd.c
+virtio_snd_get_config(void *vdev, uint32_t jacks, uint32_t streams, uint32_t chmaps) "snd %p: get_config jacks=%"PRIu32" streams=%"PRIu32" chmaps=%"PRIu32""
+virtio_snd_set_config(void *vdev, uint32_t jacks, uint32_t new_jacks, uint32_t streams, uint32_t new_streams, uint32_t chmaps, uint32_t new_chmaps) "snd %p: set_config jacks from %"PRIu32"->%"PRIu32", streams from %"PRIu32"->%"PRIu32", chmaps from %"PRIu32"->%"PRIu32
+virtio_snd_get_features(void *vdev, uint64_t features) "snd %p: get_features 0x%"PRIx64
+virtio_snd_vm_state_running(void) "vm state running"
+virtio_snd_vm_state_stopped(void) "vm state stopped"
+virtio_snd_realize(void *snd) "snd %p: realize"
+virtio_snd_unrealize(void *snd) "snd %p: unrealize"
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
new file mode 100644
index 0000000000..adce9f371e
--- /dev/null
+++ b/hw/virtio/virtio-snd.c
@@ -0,0 +1,223 @@
+/*
+ * VIRTIO Sound Device conforming to
+ *
+ * "Virtual I/O Device (VIRTIO) Version 1.2
+ * Committee Specification Draft 01
+ * 09 May 2022"
+ *
+ * <https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-52900014>
+ *
+ * Copyright (c) 2023 Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
+ * Copyright (C) 2019 OpenSynergy GmbH
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * (at your option) any later version. See the COPYING file in the
+ * top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/iov.h"
+#include "qemu/log.h"
+#include "qemu/error-report.h"
+#include "include/qemu/lockable.h"
+#include "sysemu/runstate.h"
+#include "trace.h"
+#include "qapi/error.h"
+#include "hw/virtio/virtio-snd.h"
+#include "hw/core/cpu.h"
+
+#define VIRTIO_SOUND_VM_VERSION 1
+#define VIRTIO_SOUND_JACK_DEFAULT 0
+#define VIRTIO_SOUND_STREAM_DEFAULT 1
+#define VIRTIO_SOUND_CHMAP_DEFAULT 0
+#define VIRTIO_SOUND_HDA_FN_NID 0
+
+static const VMStateDescription vmstate_virtio_snd_device = {
+ .name = TYPE_VIRTIO_SND,
+ .version_id = VIRTIO_SOUND_VM_VERSION,
+ .minimum_version_id = VIRTIO_SOUND_VM_VERSION,
+};
+
+static const VMStateDescription vmstate_virtio_snd = {
+ .name = "virtio-sound",
+ .minimum_version_id = VIRTIO_SOUND_VM_VERSION,
+ .version_id = VIRTIO_SOUND_VM_VERSION,
+ .fields = (VMStateField[]) {
+ VMSTATE_VIRTIO_DEVICE,
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+static Property virtio_snd_properties[] = {
+ DEFINE_AUDIO_PROPERTIES(VirtIOSound, card),
+ DEFINE_PROP_UINT32("jacks", VirtIOSound, snd_conf.jacks,
+ VIRTIO_SOUND_JACK_DEFAULT),
+ DEFINE_PROP_UINT32("streams", VirtIOSound, snd_conf.streams,
+ VIRTIO_SOUND_STREAM_DEFAULT),
+ DEFINE_PROP_UINT32("chmaps", VirtIOSound, snd_conf.chmaps,
+ VIRTIO_SOUND_CHMAP_DEFAULT),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void
+virtio_snd_get_config(VirtIODevice *vdev, uint8_t *config)
+{
+ VirtIOSound *s = VIRTIO_SND(vdev);
+ trace_virtio_snd_get_config(vdev,
+ s->snd_conf.jacks,
+ s->snd_conf.streams,
+ s->snd_conf.chmaps);
+
+ memcpy(config, &s->snd_conf, sizeof(s->snd_conf));
+}
+
+static void
+virtio_snd_set_config(VirtIODevice *vdev, const uint8_t *config)
+{
+ VirtIOSound *s = VIRTIO_SND(vdev);
+ const virtio_snd_config *sndconfig =
+ (const virtio_snd_config *)config;
+
+
+ trace_virtio_snd_set_config(vdev,
+ s->snd_conf.jacks,
+ sndconfig->jacks,
+ s->snd_conf.streams,
+ sndconfig->streams,
+ s->snd_conf.chmaps,
+ sndconfig->chmaps);
+
+ memcpy(&s->snd_conf, sndconfig, sizeof(s->snd_conf));
+}
+
+/*
+ * Queue handler stub.
+ *
+ * @vdev: VirtIOSound device
+ * @vq: virtqueue
+ */
+static void virtio_snd_handle_queue(VirtIODevice *vdev, VirtQueue *vq) {}
+
+static uint64_t get_features(VirtIODevice *vdev, uint64_t features,
+ Error **errp)
+{
+ /*
+ * virtio-v1.2-csd01, 5.14.3,
+ * Feature Bits
+ * None currently defined.
+ */
+ VirtIOSound *s = VIRTIO_SND(vdev);
+ features |= s->features;
+
+ trace_virtio_snd_get_features(vdev, features);
+
+ return features;
+}
+
+static void
+virtio_snd_vm_state_change(void *opaque, bool running,
+ RunState state)
+{
+ if (running) {
+ trace_virtio_snd_vm_state_running();
+ } else {
+ trace_virtio_snd_vm_state_stopped();
+ }
+}
+
+static void virtio_snd_realize(DeviceState *dev, Error **errp)
+{
+ ERRP_GUARD();
+ VirtIOSound *vsnd = VIRTIO_SND(dev);
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+
+ vsnd->vmstate =
+ qemu_add_vm_change_state_handler(virtio_snd_vm_state_change, vsnd);
+
+ trace_virtio_snd_realize(vsnd);
+
+ virtio_init(vdev, VIRTIO_ID_SOUND, sizeof(virtio_snd_config));
+ virtio_add_feature(&vsnd->features, VIRTIO_F_VERSION_1);
+
+ /* set number of jacks and streams */
+ if (vsnd->snd_conf.jacks > 8) {
+ error_setg(errp,
+ "Invalid number of jacks: %"PRIu32,
+ vsnd->snd_conf.jacks);
+ return;
+ }
+ if (vsnd->snd_conf.streams < 1 || vsnd->snd_conf.streams > 10) {
+ error_setg(errp,
+ "Invalid number of streams: %"PRIu32,
+ vsnd->snd_conf.streams);
+ return;
+ }
+
+ if (vsnd->snd_conf.chmaps > VIRTIO_SND_CHMAP_MAX_SIZE) {
+ error_setg(errp,
+ "Invalid number of channel maps: %"PRIu32,
+ vsnd->snd_conf.chmaps);
+ return;
+ }
+
+ AUD_register_card("virtio-sound", &vsnd->card, errp);
+
+ vsnd->queues[VIRTIO_SND_VQ_CONTROL] =
+ virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
+ vsnd->queues[VIRTIO_SND_VQ_EVENT] =
+ virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
+ vsnd->queues[VIRTIO_SND_VQ_TX] =
+ virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
+ vsnd->queues[VIRTIO_SND_VQ_RX] =
+ virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
+}
+
+static void virtio_snd_unrealize(DeviceState *dev)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VirtIOSound *vsnd = VIRTIO_SND(dev);
+
+ qemu_del_vm_change_state_handler(vsnd->vmstate);
+ trace_virtio_snd_unrealize(vsnd);
+
+ AUD_remove_card(&vsnd->card);
+ virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_CONTROL]);
+ virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_EVENT]);
+ virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_TX]);
+ virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_RX]);
+ virtio_cleanup(vdev);
+}
+
+
+static void virtio_snd_reset(VirtIODevice *vdev) {}
+
+static void virtio_snd_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+
+
+ set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
+ device_class_set_props(dc, virtio_snd_properties);
+
+ dc->vmsd = &vmstate_virtio_snd;
+ vdc->vmsd = &vmstate_virtio_snd_device;
+ vdc->realize = virtio_snd_realize;
+ vdc->unrealize = virtio_snd_unrealize;
+ vdc->get_config = virtio_snd_get_config;
+ vdc->set_config = virtio_snd_set_config;
+ vdc->get_features = get_features;
+ vdc->reset = virtio_snd_reset;
+ vdc->legacy_features = 0;
+}
+
+static const TypeInfo virtio_snd_types[] = {
+ {
+ .name = TYPE_VIRTIO_SND,
+ .parent = TYPE_VIRTIO_DEVICE,
+ .instance_size = sizeof(VirtIOSound),
+ .class_init = virtio_snd_class_init,
+ }
+};
+
+DEFINE_TYPES(virtio_snd_types)
diff --git a/include/hw/virtio/virtio-snd.h b/include/hw/virtio/virtio-snd.h
new file mode 100644
index 0000000000..934e854a80
--- /dev/null
+++ b/include/hw/virtio/virtio-snd.h
@@ -0,0 +1,79 @@
+/*
+ * VIRTIO Sound Device conforming to
+ *
+ * "Virtual I/O Device (VIRTIO) Version 1.2
+ * Committee Specification Draft 01
+ * 09 May 2022"
+ *
+ * Copyright (c) 2023 Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
+ * Copyright (C) 2019 OpenSynergy GmbH
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * (at your option) any later version. See the COPYING file in the
+ * top-level directory.
+ */
+
+#ifndef QEMU_VIRTIO_SOUND_H
+#define QEMU_VIRTIO_SOUND_H
+
+#include "hw/virtio/virtio.h"
+#include "audio/audio.h"
+#include "standard-headers/linux/virtio_ids.h"
+#include "standard-headers/linux/virtio_snd.h"
+
+#define TYPE_VIRTIO_SND "virtio-sound"
+#define VIRTIO_SND(obj) \
+ OBJECT_CHECK(VirtIOSound, (obj), TYPE_VIRTIO_SND)
+
+/* CONFIGURATION SPACE */
+
+typedef struct virtio_snd_config virtio_snd_config;
+
+/* COMMON DEFINITIONS */
+
+/* common header for request/response*/
+typedef struct virtio_snd_hdr virtio_snd_hdr;
+
+/* event notification */
+typedef struct virtio_snd_event virtio_snd_event;
+
+/* common control request to query an item information */
+typedef struct virtio_snd_query_info virtio_snd_query_info;
+
+/* JACK CONTROL MESSAGES */
+
+typedef struct virtio_snd_jack_hdr virtio_snd_jack_hdr;
+
+/* jack information structure */
+typedef struct virtio_snd_jack_info virtio_snd_jack_info;
+
+/* jack remapping control request */
+typedef struct virtio_snd_jack_remap virtio_snd_jack_remap;
+
+/*
+ * PCM CONTROL MESSAGES
+ */
+typedef struct virtio_snd_pcm_hdr virtio_snd_pcm_hdr;
+
+/* PCM stream info structure */
+typedef struct virtio_snd_pcm_info virtio_snd_pcm_info;
+
+/* set PCM stream params */
+typedef struct virtio_snd_pcm_set_params virtio_snd_pcm_set_params;
+
+/* I/O request header */
+typedef struct virtio_snd_pcm_xfer virtio_snd_pcm_xfer;
+
+/* I/O request status */
+typedef struct virtio_snd_pcm_status virtio_snd_pcm_status;
+
+typedef struct VirtIOSound {
+ VirtIODevice parent_obj;
+
+ VirtQueue *queues[VIRTIO_SND_VQ_MAX];
+ uint64_t features;
+ QEMUSoundCard card;
+ VMChangeStateEntry *vmstate;
+ virtio_snd_config snd_conf;
+} VirtIOSound;
+#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 02/11] Add virtio-sound-pci device
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 01/11] Add virtio-sound device stub Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 03/11] virtio-sound: handle control messages and streams Manos Pitsidianakis
` (9 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
This patch adds a PCI wrapper device for the virtio-sound device.
It is necessary to instantiate a virtio-snd device in a guest.
All sound logic will be added to the virtio-snd device in the following
commits.
To add this device with a guest, you'll need a >=5.13 kernel compiled
with CONFIG_SND_VIRTIO=y, which at the time of writing most distros have
off by default.
Use with following flags in the invocation:
Pulseaudio:
-audio driver=pa,model=virtio
or
-audio driver=pa,model=virtio,server=/run/user/1000/pulse/native
sdl:
-audio driver=sdl,model=virtio
coreaudio (macos/darwin):
-audio driver=coreaudio,model=virtio
etc.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
---
hw/virtio/meson.build | 1 +
hw/virtio/virtio-snd-pci.c (new) | 93 ++++++++++++++++++++++++++++++++
hw/virtio/virtio-snd.c | 14 ++++-
system/qdev-monitor.c | 1 +
4 files changed, 107 insertions(+), 2 deletions(-)
diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
index d0572b298c..6233795018 100644
--- a/hw/virtio/meson.build
+++ b/hw/virtio/meson.build
@@ -67,6 +67,7 @@ virtio_pci_ss.add(when: 'CONFIG_VIRTIO_SERIAL', if_true: files('virtio-serial-pc
virtio_pci_ss.add(when: 'CONFIG_VIRTIO_PMEM', if_true: files('virtio-pmem-pci.c'))
virtio_pci_ss.add(when: 'CONFIG_VIRTIO_IOMMU', if_true: files('virtio-iommu-pci.c'))
virtio_pci_ss.add(when: 'CONFIG_VIRTIO_MEM', if_true: files('virtio-mem-pci.c'))
+virtio_pci_ss.add(when: 'CONFIG_VIRTIO_SND', if_true: files('virtio-snd-pci.c'))
virtio_pci_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true: files('vdpa-dev-pci.c'))
virtio_pci_ss.add(when: 'CONFIG_VIRTIO_MD', if_true: files('virtio-md-pci.c'))
diff --git a/hw/virtio/virtio-snd-pci.c b/hw/virtio/virtio-snd-pci.c
new file mode 100644
index 0000000000..afe50a5354
--- /dev/null
+++ b/hw/virtio/virtio-snd-pci.c
@@ -0,0 +1,93 @@
+/*
+ * VIRTIO Sound Device PCI Bindings
+ *
+ * Copyright (c) 2023 Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * (at your option) any later version. See the COPYING file in the
+ * top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qom/object.h"
+#include "qapi/error.h"
+#include "hw/audio/soundhw.h"
+#include "hw/virtio/virtio-pci.h"
+#include "hw/virtio/virtio-snd.h"
+
+/*
+ * virtio-snd-pci: This extends VirtioPCIProxy.
+ */
+#define TYPE_VIRTIO_SND_PCI "virtio-sound-pci"
+OBJECT_DECLARE_SIMPLE_TYPE(VirtIOSoundPCI, VIRTIO_SND_PCI)
+
+struct VirtIOSoundPCI {
+ VirtIOPCIProxy parent_obj;
+
+ VirtIOSound vdev;
+};
+
+static Property virtio_snd_pci_properties[] = {
+ DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags,
+ VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
+ DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void virtio_snd_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
+{
+ VirtIOSoundPCI *dev = VIRTIO_SND_PCI(vpci_dev);
+ DeviceState *vdev = DEVICE(&dev->vdev);
+
+ virtio_pci_force_virtio_1(vpci_dev);
+ qdev_realize(vdev, BUS(&vpci_dev->bus), errp);
+}
+
+static void virtio_snd_pci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioPCIClass *vpciklass = VIRTIO_PCI_CLASS(klass);
+
+ device_class_set_props(dc, virtio_snd_pci_properties);
+ dc->desc = "Virtio Sound";
+ set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
+
+ vpciklass->realize = virtio_snd_pci_realize;
+}
+
+static void virtio_snd_pci_instance_init(Object *obj)
+{
+ VirtIOSoundPCI *dev = VIRTIO_SND_PCI(obj);
+
+ virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
+ TYPE_VIRTIO_SND);
+}
+
+static const VirtioPCIDeviceTypeInfo virtio_snd_pci_info = {
+ .generic_name = TYPE_VIRTIO_SND_PCI,
+ .instance_size = sizeof(VirtIOSoundPCI),
+ .instance_init = virtio_snd_pci_instance_init,
+ .class_init = virtio_snd_pci_class_init,
+};
+
+/* Create a Virtio Sound PCI device, so '-audio driver,model=virtio' works. */
+static int virtio_snd_pci_init(PCIBus *bus, const char *audiodev)
+{
+ DeviceState *vdev = NULL;
+ VirtIOSoundPCI *dev = NULL;
+
+ vdev = qdev_new(TYPE_VIRTIO_SND_PCI);
+ assert(vdev);
+ dev = VIRTIO_SND_PCI(vdev);
+ qdev_prop_set_string(DEVICE(&dev->vdev), "audiodev", audiodev);
+ qdev_realize_and_unref(vdev, BUS(bus), &error_fatal);
+ return 0;
+}
+
+static void virtio_snd_pci_register(void)
+{
+ virtio_pci_types_register(&virtio_snd_pci_info);
+ pci_register_soundhw("virtio", "Virtio Sound", virtio_snd_pci_init);
+}
+
+type_init(virtio_snd_pci_register);
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index adce9f371e..14bc32f476 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -63,36 +63,46 @@ static void
virtio_snd_get_config(VirtIODevice *vdev, uint8_t *config)
{
VirtIOSound *s = VIRTIO_SND(vdev);
+ virtio_snd_config *sndconfig =
+ (virtio_snd_config *)config;
trace_virtio_snd_get_config(vdev,
s->snd_conf.jacks,
s->snd_conf.streams,
s->snd_conf.chmaps);
- memcpy(config, &s->snd_conf, sizeof(s->snd_conf));
+ memcpy(sndconfig, &s->snd_conf, sizeof(s->snd_conf));
+ cpu_to_le32s(&sndconfig->jacks);
+ cpu_to_le32s(&sndconfig->streams);
+ cpu_to_le32s(&sndconfig->chmaps);
+
}
static void
virtio_snd_set_config(VirtIODevice *vdev, const uint8_t *config)
{
VirtIOSound *s = VIRTIO_SND(vdev);
const virtio_snd_config *sndconfig =
(const virtio_snd_config *)config;
trace_virtio_snd_set_config(vdev,
s->snd_conf.jacks,
sndconfig->jacks,
s->snd_conf.streams,
sndconfig->streams,
s->snd_conf.chmaps,
sndconfig->chmaps);
- memcpy(&s->snd_conf, sndconfig, sizeof(s->snd_conf));
+ memcpy(&s->snd_conf, sndconfig, sizeof(virtio_snd_config));
+ le32_to_cpus(&s->snd_conf.jacks);
+ le32_to_cpus(&s->snd_conf.streams);
+ le32_to_cpus(&s->snd_conf.chmaps);
+
}
/*
* Queue handler stub.
*
* @vdev: VirtIOSound device
* @vq: virtqueue
*/
diff --git a/system/qdev-monitor.c b/system/qdev-monitor.c
index 74f4e41338..2e9835ad88 100644
--- a/system/qdev-monitor.c
+++ b/system/qdev-monitor.c
@@ -68,48 +68,49 @@ typedef struct QDevAlias
/* Please keep this table sorted by typename. */
static const QDevAlias qdev_alias_table[] = {
{ "AC97", "ac97" }, /* -soundhw name */
{ "e1000", "e1000-82540em" },
{ "ES1370", "es1370" }, /* -soundhw name */
{ "ich9-ahci", "ahci" },
{ "lsi53c895a", "lsi" },
{ "virtio-9p-device", "virtio-9p", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-9p-ccw", "virtio-9p", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-9p-pci", "virtio-9p", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-balloon-device", "virtio-balloon", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-balloon-ccw", "virtio-balloon", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-balloon-pci", "virtio-balloon", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-blk-device", "virtio-blk", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-blk-ccw", "virtio-blk", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-blk-pci", "virtio-blk", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-gpu-device", "virtio-gpu", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-gpu-ccw", "virtio-gpu", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-gpu-pci", "virtio-gpu", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-gpu-gl-device", "virtio-gpu-gl", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-gpu-gl-pci", "virtio-gpu-gl", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-input-host-device", "virtio-input-host", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-input-host-ccw", "virtio-input-host", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-input-host-pci", "virtio-input-host", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-iommu-pci", "virtio-iommu", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-keyboard-device", "virtio-keyboard", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-keyboard-ccw", "virtio-keyboard", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-keyboard-pci", "virtio-keyboard", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-mouse-device", "virtio-mouse", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-mouse-ccw", "virtio-mouse", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-mouse-pci", "virtio-mouse", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-net-device", "virtio-net", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-net-ccw", "virtio-net", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-net-pci", "virtio-net", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-rng-device", "virtio-rng", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-rng-ccw", "virtio-rng", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-rng-pci", "virtio-rng", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-scsi-device", "virtio-scsi", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-scsi-ccw", "virtio-scsi", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-scsi-pci", "virtio-scsi", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-serial-device", "virtio-serial", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-serial-ccw", "virtio-serial", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-serial-pci", "virtio-serial", QEMU_ARCH_VIRTIO_PCI},
+ { "virtio-sound-pci", "virtio-sound", QEMU_ARCH_VIRTIO_PCI},
{ "virtio-tablet-device", "virtio-tablet", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-tablet-ccw", "virtio-tablet", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-tablet-pci", "virtio-tablet", QEMU_ARCH_VIRTIO_PCI },
{ }
};
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 03/11] virtio-sound: handle control messages and streams
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 01/11] Add virtio-sound device stub Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 02/11] Add virtio-sound-pci device Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 04/11] virtio-sound: handle VIRTIO_SND_R_PCM_INFO request Manos Pitsidianakis
` (8 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Receive guest requests in the control (CTRL) queue of the virtio sound
device and reply with a NOT SUPPORTED error to all control commands.
The receiving handler is virtio_snd_handle_ctrl(). It stores all control
messages in the queue in the device's command queue. Then it calls
virtio_snd_process_cmdq() to handle each message.
The handler is process_cmd() which replies with VIRTIO_SND_S_NOT_SUPP.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
---
hw/virtio/trace-events | 4 +
hw/virtio/virtio-snd.c | 487 ++++++++++++++++++++++++++++++++-
include/hw/virtio/virtio-snd.h | 113 +++++++-
3 files changed, 595 insertions(+), 9 deletions(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 96b997f427..48043fed3e 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -163,3 +163,7 @@ virtio_snd_vm_state_running(void) "vm state running"
virtio_snd_vm_state_stopped(void) "vm state stopped"
virtio_snd_realize(void *snd) "snd %p: realize"
virtio_snd_unrealize(void *snd) "snd %p: unrealize"
+virtio_snd_handle_ctrl(void *vdev, void *vq) "snd %p: handle ctrl event for queue %p"
+virtio_snd_handle_code(uint32_t val, const char *code) "ctrl code msg val = %"PRIu32" == %s"
+virtio_snd_handle_chmap_info(void) "VIRTIO_SND_CHMAP_INFO called"
+virtio_snd_handle_event(void) "event queue callback called"
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index 14bc32f476..705dc07212 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -32,6 +32,29 @@
#define VIRTIO_SOUND_CHMAP_DEFAULT 0
#define VIRTIO_SOUND_HDA_FN_NID 0
+static uint32_t supported_formats = BIT(VIRTIO_SND_PCM_FMT_S8)
+ | BIT(VIRTIO_SND_PCM_FMT_U8)
+ | BIT(VIRTIO_SND_PCM_FMT_S16)
+ | BIT(VIRTIO_SND_PCM_FMT_U16)
+ | BIT(VIRTIO_SND_PCM_FMT_S32)
+ | BIT(VIRTIO_SND_PCM_FMT_U32)
+ | BIT(VIRTIO_SND_PCM_FMT_FLOAT);
+
+static uint32_t supported_rates = BIT(VIRTIO_SND_PCM_RATE_5512)
+ | BIT(VIRTIO_SND_PCM_RATE_8000)
+ | BIT(VIRTIO_SND_PCM_RATE_11025)
+ | BIT(VIRTIO_SND_PCM_RATE_16000)
+ | BIT(VIRTIO_SND_PCM_RATE_22050)
+ | BIT(VIRTIO_SND_PCM_RATE_32000)
+ | BIT(VIRTIO_SND_PCM_RATE_44100)
+ | BIT(VIRTIO_SND_PCM_RATE_48000)
+ | BIT(VIRTIO_SND_PCM_RATE_64000)
+ | BIT(VIRTIO_SND_PCM_RATE_88200)
+ | BIT(VIRTIO_SND_PCM_RATE_96000)
+ | BIT(VIRTIO_SND_PCM_RATE_176400)
+ | BIT(VIRTIO_SND_PCM_RATE_192000)
+ | BIT(VIRTIO_SND_PCM_RATE_384000);
+
static const VMStateDescription vmstate_virtio_snd_device = {
.name = TYPE_VIRTIO_SND,
.version_id = VIRTIO_SOUND_VM_VERSION,
@@ -81,32 +104,416 @@ static void
virtio_snd_set_config(VirtIODevice *vdev, const uint8_t *config)
{
VirtIOSound *s = VIRTIO_SND(vdev);
const virtio_snd_config *sndconfig =
(const virtio_snd_config *)config;
trace_virtio_snd_set_config(vdev,
s->snd_conf.jacks,
sndconfig->jacks,
s->snd_conf.streams,
sndconfig->streams,
s->snd_conf.chmaps,
sndconfig->chmaps);
memcpy(&s->snd_conf, sndconfig, sizeof(virtio_snd_config));
le32_to_cpus(&s->snd_conf.jacks);
le32_to_cpus(&s->snd_conf.streams);
le32_to_cpus(&s->snd_conf.chmaps);
}
+static void
+virtio_snd_ctrl_cmd_free(virtio_snd_ctrl_command *cmd)
+{
+ g_free(cmd->elem);
+ g_free(cmd);
+}
+
+/*
+ * Get a specific stream from the virtio sound card device.
+ * Returns NULL if @stream_id is invalid or not allocated.
+ *
+ * @s: VirtIOSound device
+ * @stream_id: stream id
+ */
+static VirtIOSoundPCMStream *virtio_snd_pcm_get_stream(VirtIOSound *s,
+ uint32_t stream_id)
+{
+ return stream_id >= s->snd_conf.streams ? NULL :
+ s->pcm->streams[stream_id];
+}
+
+/*
+ * Get params for a specific stream.
+ *
+ * @s: VirtIOSound device
+ * @stream_id: stream id
+ */
+static virtio_snd_pcm_set_params *virtio_snd_pcm_get_params(VirtIOSound *s,
+ uint32_t stream_id)
+{
+ return stream_id >= s->snd_conf.streams ? NULL
+ : &s->pcm->pcm_params[stream_id];
+}
+
+/*
+ * Set the given stream params.
+ * Called by both virtio_snd_handle_pcm_set_params and during device
+ * initialization.
+ * Returns the response status code. (VIRTIO_SND_S_*).
+ *
+ * @s: VirtIOSound device
+ * @params: The PCM params as defined in the virtio specification
+ */
+static
+uint32_t virtio_snd_set_pcm_params(VirtIOSound *s,
+ uint32_t stream_id,
+ virtio_snd_pcm_set_params *params)
+{
+ virtio_snd_pcm_set_params *st_params;
+
+ if (stream_id >= s->snd_conf.streams || s->pcm->pcm_params == NULL) {
+ /*
+ * TODO: do we need to set DEVICE_NEEDS_RESET?
+ */
+ virtio_error(VIRTIO_DEVICE(s), "Streams have not been initialized.\n");
+ return cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ }
+
+ st_params = virtio_snd_pcm_get_params(s, stream_id);
+
+ if (params->channels < 1 || params->channels > AUDIO_MAX_CHANNELS) {
+ error_report("Number of channels is not supported.");
+ return cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
+ }
+ if (!(supported_formats & BIT(params->format))) {
+ error_report("Stream format is not supported.");
+ return cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
+ }
+ if (!(supported_rates & BIT(params->rate))) {
+ error_report("Stream rate is not supported.");
+ return cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
+ }
+
+ st_params->buffer_bytes = le32_to_cpu(params->buffer_bytes);
+ st_params->period_bytes = le32_to_cpu(params->period_bytes);
+ st_params->features = le32_to_cpu(params->features);
+ /* the following are uint8_t, so there's no need to bswap the values. */
+ st_params->channels = params->channels;
+ st_params->format = params->format;
+ st_params->rate = params->rate;
+
+ return cpu_to_le32(VIRTIO_SND_S_OK);
+}
+
+/*
+ * Get a QEMU Audiosystem compatible format value from a VIRTIO_SND_PCM_FMT_*
+ */
+static AudioFormat virtio_snd_get_qemu_format(uint32_t format)
+{
+ #define CASE(FMT) \
+ case VIRTIO_SND_PCM_FMT_##FMT: \
+ return AUDIO_FORMAT_##FMT;
+
+ switch (format) {
+ CASE(U8)
+ CASE(S8)
+ CASE(U16)
+ CASE(S16)
+ CASE(U32)
+ CASE(S32)
+ case VIRTIO_SND_PCM_FMT_FLOAT:
+ return AUDIO_FORMAT_F32;
+ default:
+ g_assert_not_reached();
+ }
+
+ #undef CASE
+}
+
+/*
+ * Get a QEMU Audiosystem compatible frequency value from a
+ * VIRTIO_SND_PCM_RATE_*
+ */
+static uint32_t virtio_snd_get_qemu_freq(uint32_t rate)
+{
+ #define CASE(RATE) \
+ case VIRTIO_SND_PCM_RATE_##RATE: \
+ return RATE;
+
+ switch (rate) {
+ CASE(5512)
+ CASE(8000)
+ CASE(11025)
+ CASE(16000)
+ CASE(22050)
+ CASE(32000)
+ CASE(44100)
+ CASE(48000)
+ CASE(64000)
+ CASE(88200)
+ CASE(96000)
+ CASE(176400)
+ CASE(192000)
+ CASE(384000)
+ default:
+ g_assert_not_reached();
+ }
+
+ #undef CASE
+}
+
+/*
+ * Get QEMU Audiosystem compatible audsettings from virtio based pcm stream
+ * params.
+ */
+static void virtio_snd_get_qemu_audsettings(audsettings *as,
+ virtio_snd_pcm_set_params *params)
+{
+ as->nchannels = MIN(AUDIO_MAX_CHANNELS, params->channels);
+ as->fmt = virtio_snd_get_qemu_format(params->format);
+ as->freq = virtio_snd_get_qemu_freq(params->rate);
+ as->endianness = target_words_bigendian() ? 1 : 0;
+}
+
+/*
+ * Close a stream and free all its resources.
+ *
+ * @stream: VirtIOSoundPCMStream *stream
+ */
+static void virtio_snd_pcm_close(VirtIOSoundPCMStream *stream)
+{
+}
+
/*
- * Queue handler stub.
+ * Prepares a VirtIOSound card stream.
+ * Returns the response status code. (VIRTIO_SND_S_*).
+ *
+ * @s: VirtIOSound device
+ * @stream_id: stream id
+ */
+static uint32_t virtio_snd_pcm_prepare(VirtIOSound *s, uint32_t stream_id)
+{
+ audsettings as;
+ virtio_snd_pcm_set_params *params;
+ VirtIOSoundPCMStream *stream;
+
+ if (s->pcm->streams == NULL ||
+ s->pcm->pcm_params == NULL ||
+ stream_id >= s->snd_conf.streams) {
+ return cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ }
+
+ params = virtio_snd_pcm_get_params(s, stream_id);
+ if (params == NULL) {
+ return cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ }
+
+ stream = virtio_snd_pcm_get_stream(s, stream_id);
+ if (stream == NULL) {
+ stream = g_new0(VirtIOSoundPCMStream, 1);
+ stream->active = false;
+ stream->id = stream_id;
+ stream->pcm = s->pcm;
+ stream->s = s;
+
+ /*
+ * stream_id >= s->snd_conf.streams was checked before so this is
+ * in-bounds
+ */
+ s->pcm->streams[stream_id] = stream;
+ }
+
+ virtio_snd_get_qemu_audsettings(&as, params);
+ stream->info.direction = stream_id < s->snd_conf.streams / 2 +
+ (s->snd_conf.streams & 1) ? VIRTIO_SND_D_OUTPUT : VIRTIO_SND_D_INPUT;
+ stream->info.hdr.hda_fn_nid = VIRTIO_SOUND_HDA_FN_NID;
+ stream->info.features = 0;
+ stream->info.channels_min = 1;
+ stream->info.channels_max = as.nchannels;
+ stream->info.formats = supported_formats;
+ stream->info.rates = supported_rates;
+ stream->params = *params;
+
+ stream->positions[0] = VIRTIO_SND_CHMAP_FL;
+ stream->positions[1] = VIRTIO_SND_CHMAP_FR;
+ stream->as = as;
+
+ return cpu_to_le32(VIRTIO_SND_S_OK);
+}
+
+static const char *print_code(uint32_t code)
+{
+ #define CASE(CODE) \
+ case VIRTIO_SND_R_##CODE: \
+ return "VIRTIO_SND_R_"#CODE
+
+ switch (code) {
+ CASE(JACK_INFO);
+ CASE(JACK_REMAP);
+ CASE(PCM_INFO);
+ CASE(PCM_SET_PARAMS);
+ CASE(PCM_PREPARE);
+ CASE(PCM_RELEASE);
+ CASE(PCM_START);
+ CASE(PCM_STOP);
+ CASE(CHMAP_INFO);
+ default:
+ return "invalid code";
+ }
+
+ #undef CASE
+};
+
+/*
+ * The actual processing done in virtio_snd_process_cmdq().
+ *
+ * @s: VirtIOSound device
+ * @cmd: control command request
+ */
+static inline void
+process_cmd(VirtIOSound *s, virtio_snd_ctrl_command *cmd)
+{
+ uint32_t code;
+ size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
+ cmd->elem->out_num,
+ 0,
+ &cmd->ctrl,
+ sizeof(virtio_snd_hdr));
+
+ if (msg_sz != sizeof(virtio_snd_hdr)) {
+ /*
+ * TODO: do we need to set DEVICE_NEEDS_RESET?
+ */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: virtio-snd command size incorrect %zu vs \
+ %zu\n", __func__, msg_sz, sizeof(virtio_snd_hdr));
+ return;
+ }
+
+ code = le32_to_cpu(cmd->ctrl.code);
+
+ trace_virtio_snd_handle_code(code, print_code(code));
+
+ switch (code) {
+ case VIRTIO_SND_R_JACK_INFO:
+ case VIRTIO_SND_R_JACK_REMAP:
+ qemu_log_mask(LOG_UNIMP,
+ "virtio_snd: jack functionality is unimplemented.\n");
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
+ break;
+ case VIRTIO_SND_R_PCM_INFO:
+ case VIRTIO_SND_R_PCM_SET_PARAMS:
+ case VIRTIO_SND_R_PCM_PREPARE:
+ case VIRTIO_SND_R_PCM_START:
+ case VIRTIO_SND_R_PCM_STOP:
+ case VIRTIO_SND_R_PCM_RELEASE:
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
+ break;
+ case VIRTIO_SND_R_CHMAP_INFO:
+ qemu_log_mask(LOG_UNIMP,
+ "virtio_snd: chmap info functionality is unimplemented.\n");
+ trace_virtio_snd_handle_chmap_info();
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
+ break;
+ default:
+ /* error */
+ error_report("virtio snd header not recognized: %"PRIu32, code);
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ }
+
+ iov_from_buf(cmd->elem->in_sg,
+ cmd->elem->in_num,
+ 0,
+ &cmd->resp,
+ sizeof(virtio_snd_hdr));
+ virtqueue_push(cmd->vq, cmd->elem, sizeof(virtio_snd_hdr));
+ virtio_notify(VIRTIO_DEVICE(s), cmd->vq);
+}
+
+/*
+ * Consume all elements in command queue.
+ *
+ * @s: VirtIOSound device
+ */
+static void virtio_snd_process_cmdq(VirtIOSound *s)
+{
+ virtio_snd_ctrl_command *cmd;
+
+ if (unlikely(qatomic_read(&s->processing_cmdq))) {
+ return;
+ }
+
+ WITH_QEMU_LOCK_GUARD(&s->cmdq_mutex) {
+ qatomic_set(&s->processing_cmdq, true);
+ while (!QTAILQ_EMPTY(&s->cmdq)) {
+ cmd = QTAILQ_FIRST(&s->cmdq);
+
+ /* process command */
+ process_cmd(s, cmd);
+
+ QTAILQ_REMOVE(&s->cmdq, cmd, next);
+
+ virtio_snd_ctrl_cmd_free(cmd);
+ }
+ qatomic_set(&s->processing_cmdq, false);
+ }
+}
+
+/*
+ * The control message handler. Pops an element from the control virtqueue,
+ * and stores them to VirtIOSound's cmdq queue and finally calls
+ * virtio_snd_process_cmdq() for processing.
+ *
+ * @vdev: VirtIOSound device
+ * @vq: Control virtqueue
+ */
+static void virtio_snd_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
+{
+ VirtIOSound *s = VIRTIO_SND(vdev);
+ VirtQueueElement *elem;
+ virtio_snd_ctrl_command *cmd;
+
+ trace_virtio_snd_handle_ctrl(vdev, vq);
+
+ if (!virtio_queue_ready(vq)) {
+ return;
+ }
+
+ elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
+ while (elem) {
+ cmd = g_new0(virtio_snd_ctrl_command, 1);
+ cmd->elem = elem;
+ cmd->vq = vq;
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
+ QTAILQ_INSERT_TAIL(&s->cmdq, cmd, next);
+ elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
+ }
+
+ virtio_snd_process_cmdq(s);
+}
+
+/*
+ * The event virtqueue handler.
+ * Not implemented yet.
+ *
+ * @vdev: VirtIOSound device
+ * @vq: event vq
+ */
+static void virtio_snd_handle_event(VirtIODevice *vdev, VirtQueue *vq)
+{
+ qemu_log_mask(LOG_UNIMP, "virtio_snd: event queue is unimplemented.\n");
+ trace_virtio_snd_handle_event();
+}
+
+/*
+ * Stub buffer virtqueue handler.
*
* @vdev: VirtIOSound device
* @vq: virtqueue
*/
-static void virtio_snd_handle_queue(VirtIODevice *vdev, VirtQueue *vq) {}
+static void virtio_snd_handle_xfer(VirtIODevice *vdev, VirtQueue *vq) {}
static uint64_t get_features(VirtIODevice *vdev, uint64_t features,
Error **errp)
@@ -138,68 +545,134 @@ virtio_snd_vm_state_change(void *opaque, bool running,
static void virtio_snd_realize(DeviceState *dev, Error **errp)
{
ERRP_GUARD();
VirtIOSound *vsnd = VIRTIO_SND(dev);
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ virtio_snd_pcm_set_params default_params = { 0 };
+ uint32_t status;
+ vsnd->pcm = NULL;
vsnd->vmstate =
qemu_add_vm_change_state_handler(virtio_snd_vm_state_change, vsnd);
trace_virtio_snd_realize(vsnd);
+ vsnd->pcm = g_new0(VirtIOSoundPCM, 1);
+ vsnd->pcm->snd = vsnd;
+ vsnd->pcm->streams =
+ g_new0(VirtIOSoundPCMStream *, vsnd->snd_conf.streams);
+ vsnd->pcm->pcm_params =
+ g_new0(virtio_snd_pcm_set_params, vsnd->snd_conf.streams);
+
virtio_init(vdev, VIRTIO_ID_SOUND, sizeof(virtio_snd_config));
virtio_add_feature(&vsnd->features, VIRTIO_F_VERSION_1);
/* set number of jacks and streams */
if (vsnd->snd_conf.jacks > 8) {
error_setg(errp,
"Invalid number of jacks: %"PRIu32,
vsnd->snd_conf.jacks);
return;
}
if (vsnd->snd_conf.streams < 1 || vsnd->snd_conf.streams > 10) {
error_setg(errp,
"Invalid number of streams: %"PRIu32,
vsnd->snd_conf.streams);
return;
}
if (vsnd->snd_conf.chmaps > VIRTIO_SND_CHMAP_MAX_SIZE) {
error_setg(errp,
"Invalid number of channel maps: %"PRIu32,
vsnd->snd_conf.chmaps);
return;
}
AUD_register_card("virtio-sound", &vsnd->card, errp);
+ /* set default params for all streams */
+ default_params.features = 0;
+ default_params.buffer_bytes = cpu_to_le32(8192);
+ default_params.period_bytes = cpu_to_le32(2048);
+ default_params.channels = 2;
+ default_params.format = VIRTIO_SND_PCM_FMT_S16;
+ default_params.rate = VIRTIO_SND_PCM_RATE_48000;
vsnd->queues[VIRTIO_SND_VQ_CONTROL] =
- virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
+ virtio_add_queue(vdev, 64, virtio_snd_handle_ctrl);
vsnd->queues[VIRTIO_SND_VQ_EVENT] =
- virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
+ virtio_add_queue(vdev, 64, virtio_snd_handle_event);
vsnd->queues[VIRTIO_SND_VQ_TX] =
- virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
+ virtio_add_queue(vdev, 64, virtio_snd_handle_xfer);
vsnd->queues[VIRTIO_SND_VQ_RX] =
- virtio_add_queue(vdev, 64, virtio_snd_handle_queue);
+ virtio_add_queue(vdev, 64, virtio_snd_handle_xfer);
+ qemu_mutex_init(&vsnd->cmdq_mutex);
+ QTAILQ_INIT(&vsnd->cmdq);
+
+ for (uint32_t i = 0; i < vsnd->snd_conf.streams; i++) {
+ status = virtio_snd_set_pcm_params(vsnd, i, &default_params);
+ if (status != cpu_to_le32(VIRTIO_SND_S_OK)) {
+ error_setg(errp,
+ "Can't initalize stream params, device responded with %s.",
+ print_code(status));
+ return;
+ }
+ status = virtio_snd_pcm_prepare(vsnd, i);
+ if (status != cpu_to_le32(VIRTIO_SND_S_OK)) {
+ error_setg(errp,
+ "Can't prepare streams, device responded with %s.",
+ print_code(status));
+ return;
+ }
+ }
}
static void virtio_snd_unrealize(DeviceState *dev)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOSound *vsnd = VIRTIO_SND(dev);
+ VirtIOSoundPCMStream *stream;
qemu_del_vm_change_state_handler(vsnd->vmstate);
trace_virtio_snd_unrealize(vsnd);
+ if (vsnd->pcm) {
+ if (vsnd->pcm->streams) {
+ for (uint32_t i = 0; i < vsnd->snd_conf.streams; i++) {
+ stream = vsnd->pcm->streams[i];
+ if (stream) {
+ virtio_snd_process_cmdq(stream->s);
+ virtio_snd_pcm_close(stream);
+ g_free(stream);
+ }
+ }
+ g_free(vsnd->pcm->streams);
+ }
+ g_free(vsnd->pcm->pcm_params);
+ g_free(vsnd->pcm);
+ vsnd->pcm = NULL;
+ }
AUD_remove_card(&vsnd->card);
+ qemu_mutex_destroy(&vsnd->cmdq_mutex);
virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_CONTROL]);
virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_EVENT]);
virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_TX]);
virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_RX]);
virtio_cleanup(vdev);
}
-static void virtio_snd_reset(VirtIODevice *vdev) {}
+static void virtio_snd_reset(VirtIODevice *vdev)
+{
+ VirtIOSound *s = VIRTIO_SND(vdev);
+ virtio_snd_ctrl_command *cmd;
+
+ WITH_QEMU_LOCK_GUARD(&s->cmdq_mutex) {
+ while (!QTAILQ_EMPTY(&s->cmdq)) {
+ cmd = QTAILQ_FIRST(&s->cmdq);
+ QTAILQ_REMOVE(&s->cmdq, cmd, next);
+ virtio_snd_ctrl_cmd_free(cmd);
+ }
+ }
+}
static void virtio_snd_class_init(ObjectClass *klass, void *data)
{
diff --git a/include/hw/virtio/virtio-snd.h b/include/hw/virtio/virtio-snd.h
index 934e854a80..4b4aaffff1 100644
--- a/include/hw/virtio/virtio-snd.h
+++ b/include/hw/virtio/virtio-snd.h
@@ -67,13 +67,122 @@ typedef struct virtio_snd_pcm_xfer virtio_snd_pcm_xfer;
/* I/O request status */
typedef struct virtio_snd_pcm_status virtio_snd_pcm_status;
-typedef struct VirtIOSound {
+/* device structs */
+
+typedef struct VirtIOSound VirtIOSound;
+
+typedef struct VirtIOSoundPCMStream VirtIOSoundPCMStream;
+
+typedef struct virtio_snd_ctrl_command virtio_snd_ctrl_command;
+
+typedef struct VirtIOSoundPCM VirtIOSoundPCM;
+
+struct VirtIOSoundPCM {
+ VirtIOSound *snd;
+ /*
+ * PCM parameters are a separate field instead of a VirtIOSoundPCMStream
+ * field, because the operation of PCM control requests is first
+ * VIRTIO_SND_R_PCM_SET_PARAMS and then VIRTIO_SND_R_PCM_PREPARE; this
+ * means that some times we get parameters without having an allocated
+ * stream yet.
+ */
+ virtio_snd_pcm_set_params *pcm_params;
+ VirtIOSoundPCMStream **streams;
+};
+
+struct VirtIOSoundPCMStream {
+ VirtIOSoundPCM *pcm;
+ virtio_snd_pcm_info info;
+ virtio_snd_pcm_set_params params;
+ uint32_t id;
+ /* channel position values (VIRTIO_SND_CHMAP_XXX) */
+ uint8_t positions[VIRTIO_SND_CHMAP_MAX_SIZE];
+ VirtIOSound *s;
+ bool flushing;
+ audsettings as;
+ union {
+ SWVoiceIn *in;
+ SWVoiceOut *out;
+ } voice;
+ bool active;
+};
+
+/*
+ * PCM stream state machine.
+ * -------------------------
+ *
+ * 5.14.6.6.1 PCM Command Lifecycle
+ * ================================
+ *
+ * A PCM stream has the following command lifecycle:
+ * - `SET PARAMETERS`
+ * The driver negotiates the stream parameters (format, transport, etc) with
+ * the device.
+ * Possible valid transitions: `SET PARAMETERS`, `PREPARE`.
+ * - `PREPARE`
+ * The device prepares the stream (allocates resources, etc).
+ * Possible valid transitions: `SET PARAMETERS`, `PREPARE`, `START`,
+ * `RELEASE`. Output only: the driver transfers data for pre-buffing.
+ * - `START`
+ * The device starts the stream (unmute, putting into running state, etc).
+ * Possible valid transitions: `STOP`.
+ * The driver transfers data to/from the stream.
+ * - `STOP`
+ * The device stops the stream (mute, putting into non-running state, etc).
+ * Possible valid transitions: `START`, `RELEASE`.
+ * - `RELEASE`
+ * The device releases the stream (frees resources, etc).
+ * Possible valid transitions: `SET PARAMETERS`, `PREPARE`.
+ *
+ * +---------------+ +---------+ +---------+ +-------+ +-------+
+ * | SetParameters | | Prepare | | Release | | Start | | Stop |
+ * +---------------+ +---------+ +---------+ +-------+ +-------+
+ * |- | | | |
+ * || | | | |
+ * |< | | | |
+ * |------------->| | | |
+ * |<-------------| | | |
+ * | |- | | |
+ * | || | | |
+ * | |< | | |
+ * | |--------------------->| |
+ * | |---------->| | |
+ * | | | |-------->|
+ * | | | |<--------|
+ * | | |<-------------------|
+ * |<-------------------------| | |
+ * | |<----------| | |
+ *
+ * CTRL in the VirtIOSound device
+ * ==============================
+ *
+ * The control messages that affect the state of a stream arrive in the
+ * `virtio_snd_handle_ctrl()` queue callback and are of type `struct
+ * virtio_snd_ctrl_command`. They are stored in a queue field in the device
+ * type, `VirtIOSound`. This allows deferring the CTRL request completion if
+ * it's not immediately possible due to locking/state reasons.
+ *
+ * The CTRL message is finally handled in `process_cmd()`.
+ */
+struct VirtIOSound {
VirtIODevice parent_obj;
VirtQueue *queues[VIRTIO_SND_VQ_MAX];
uint64_t features;
+ VirtIOSoundPCM *pcm;
QEMUSoundCard card;
VMChangeStateEntry *vmstate;
virtio_snd_config snd_conf;
-} VirtIOSound;
+ QemuMutex cmdq_mutex;
+ QTAILQ_HEAD(, virtio_snd_ctrl_command) cmdq;
+ bool processing_cmdq;
+};
+
+struct virtio_snd_ctrl_command {
+ VirtQueueElement *elem;
+ VirtQueue *vq;
+ virtio_snd_hdr ctrl;
+ virtio_snd_hdr resp;
+ QTAILQ_ENTRY(virtio_snd_ctrl_command) next;
+};
#endif
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 04/11] virtio-sound: handle VIRTIO_SND_R_PCM_INFO request
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (2 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 03/11] virtio-sound: handle control messages and streams Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 05/11] virtio-sound: handle VIRTIO_SND_R_PCM_{START,STOP} Manos Pitsidianakis
` (7 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Respond to the VIRTIO_SND_R_PCM_INFO control request with the parameters
of each requested PCM stream.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/virtio/trace-events | 1 +
hw/virtio/virtio-snd.c | 82 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 83 insertions(+)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 48043fed3e..88de2021c8 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -164,6 +164,7 @@ virtio_snd_vm_state_stopped(void) "vm state stopped"
virtio_snd_realize(void *snd) "snd %p: realize"
virtio_snd_unrealize(void *snd) "snd %p: unrealize"
virtio_snd_handle_ctrl(void *vdev, void *vq) "snd %p: handle ctrl event for queue %p"
+virtio_snd_handle_pcm_info(uint32_t stream) "VIRTIO_SND_R_PCM_INFO called for stream %"PRIu32
virtio_snd_handle_code(uint32_t val, const char *code) "ctrl code msg val = %"PRIu32" == %s"
virtio_snd_handle_chmap_info(void) "VIRTIO_SND_CHMAP_INFO called"
virtio_snd_handle_event(void) "event queue callback called"
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index 705dc07212..ec945d55a7 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -147,22 +147,102 @@ static VirtIOSoundPCMStream *virtio_snd_pcm_get_stream(VirtIOSound *s,
/*
* Get params for a specific stream.
*
* @s: VirtIOSound device
* @stream_id: stream id
*/
static virtio_snd_pcm_set_params *virtio_snd_pcm_get_params(VirtIOSound *s,
uint32_t stream_id)
{
return stream_id >= s->snd_conf.streams ? NULL
: &s->pcm->pcm_params[stream_id];
}
+/*
+ * Handle the VIRTIO_SND_R_PCM_INFO request.
+ * The function writes the info structs to the request element.
+ *
+ * @s: VirtIOSound device
+ * @cmd: The request command queue element from VirtIOSound cmdq field
+ */
+static void virtio_snd_handle_pcm_info(VirtIOSound *s,
+ virtio_snd_ctrl_command *cmd)
+{
+ uint32_t stream_id, start_id, count, size;
+ virtio_snd_pcm_info val;
+ virtio_snd_query_info req;
+ VirtIOSoundPCMStream *stream = NULL;
+ g_autofree virtio_snd_pcm_info *pcm_info = NULL;
+ size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
+ cmd->elem->out_num,
+ 0,
+ &req,
+ sizeof(virtio_snd_query_info));
+
+ if (msg_sz != sizeof(virtio_snd_query_info)) {
+ /*
+ * TODO: do we need to set DEVICE_NEEDS_RESET?
+ */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: virtio-snd command size incorrect %zu vs \
+ %zu\n", __func__, msg_sz, sizeof(virtio_snd_query_info));
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ return;
+ }
+
+ start_id = le32_to_cpu(req.start_id);
+ count = le32_to_cpu(req.count);
+ size = le32_to_cpu(req.size);
+
+ if (iov_size(cmd->elem->in_sg, cmd->elem->in_num) <
+ sizeof(virtio_snd_hdr) + size * count) {
+ /*
+ * TODO: do we need to set DEVICE_NEEDS_RESET?
+ */
+ error_report("pcm info: buffer too small, got: %zu, needed: %zu",
+ iov_size(cmd->elem->in_sg, cmd->elem->in_num),
+ sizeof(virtio_snd_pcm_info));
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ return;
+ }
+
+ pcm_info = g_new0(virtio_snd_pcm_info, count);
+ for (uint32_t i = 0; i < count; i++) {
+ stream_id = i + start_id;
+ trace_virtio_snd_handle_pcm_info(stream_id);
+ stream = virtio_snd_pcm_get_stream(s, stream_id);
+ if (!stream) {
+ error_report("Invalid stream id: %"PRIu32, stream_id);
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ return;
+ }
+ val = stream->info;
+ val.hdr.hda_fn_nid = cpu_to_le32(val.hdr.hda_fn_nid);
+ val.features = cpu_to_le32(val.features);
+ val.formats = cpu_to_le64(val.formats);
+ val.rates = cpu_to_le64(val.rates);
+ /*
+ * 5.14.6.6.2.1 Device Requirements: Stream Information The device MUST
+ * NOT set undefined feature, format, rate and direction values. The
+ * device MUST initialize the padding bytes to 0.
+ */
+ pcm_info[i] = val;
+ memset(&pcm_info[i].padding, 0, 5);
+ }
+
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
+ iov_from_buf(cmd->elem->in_sg,
+ cmd->elem->in_num,
+ sizeof(virtio_snd_hdr),
+ pcm_info,
+ sizeof(virtio_snd_pcm_info) * count);
+}
+
/*
* Set the given stream params.
* Called by both virtio_snd_handle_pcm_set_params and during device
* initialization.
* Returns the response status code. (VIRTIO_SND_S_*).
*
* @s: VirtIOSound device
* @params: The PCM params as defined in the virtio specification
*/
@@ -376,64 +456,66 @@ static inline void
process_cmd(VirtIOSound *s, virtio_snd_ctrl_command *cmd)
{
uint32_t code;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
0,
&cmd->ctrl,
sizeof(virtio_snd_hdr));
if (msg_sz != sizeof(virtio_snd_hdr)) {
/*
* TODO: do we need to set DEVICE_NEEDS_RESET?
*/
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(virtio_snd_hdr));
return;
}
code = le32_to_cpu(cmd->ctrl.code);
trace_virtio_snd_handle_code(code, print_code(code));
switch (code) {
case VIRTIO_SND_R_JACK_INFO:
case VIRTIO_SND_R_JACK_REMAP:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: jack functionality is unimplemented.\n");
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_PCM_INFO:
+ virtio_snd_handle_pcm_info(s, cmd);
+ break;
case VIRTIO_SND_R_PCM_SET_PARAMS:
case VIRTIO_SND_R_PCM_PREPARE:
case VIRTIO_SND_R_PCM_START:
case VIRTIO_SND_R_PCM_STOP:
case VIRTIO_SND_R_PCM_RELEASE:
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_CHMAP_INFO:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: chmap info functionality is unimplemented.\n");
trace_virtio_snd_handle_chmap_info();
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
default:
/* error */
error_report("virtio snd header not recognized: %"PRIu32, code);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
iov_from_buf(cmd->elem->in_sg,
cmd->elem->in_num,
0,
&cmd->resp,
sizeof(virtio_snd_hdr));
virtqueue_push(cmd->vq, cmd->elem, sizeof(virtio_snd_hdr));
virtio_notify(VIRTIO_DEVICE(s), cmd->vq);
}
/*
* Consume all elements in command queue.
*
* @s: VirtIOSound device
*/
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 05/11] virtio-sound: handle VIRTIO_SND_R_PCM_{START,STOP}
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (3 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 04/11] virtio-sound: handle VIRTIO_SND_R_PCM_INFO request Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 06/11] virtio-sound: handle VIRTIO_SND_R_PCM_SET_PARAMS Manos Pitsidianakis
` (6 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Handle the start and stop control messages for a stream_id. This request
does nothing at the moment except for replying to it. Audio playback
or capture will be started/stopped here in follow-up commits.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/virtio/trace-events | 1 +
hw/virtio/virtio-snd.c | 49 ++++++++++++++++++++++++++++++++++++++++--
2 files changed, 48 insertions(+), 2 deletions(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 88de2021c8..7044b110b7 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -165,6 +165,7 @@ virtio_snd_realize(void *snd) "snd %p: realize"
virtio_snd_unrealize(void *snd) "snd %p: unrealize"
virtio_snd_handle_ctrl(void *vdev, void *vq) "snd %p: handle ctrl event for queue %p"
virtio_snd_handle_pcm_info(uint32_t stream) "VIRTIO_SND_R_PCM_INFO called for stream %"PRIu32
+virtio_snd_handle_pcm_start_stop(const char *code, uint32_t stream) "%s called for stream %"PRIu32
virtio_snd_handle_code(uint32_t val, const char *code) "ctrl code msg val = %"PRIu32" == %s"
virtio_snd_handle_chmap_info(void) "VIRTIO_SND_CHMAP_INFO called"
virtio_snd_handle_event(void) "event queue callback called"
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index ec945d55a7..50b5a9d5df 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -426,29 +426,70 @@ static uint32_t virtio_snd_pcm_prepare(VirtIOSound *s, uint32_t stream_id)
static const char *print_code(uint32_t code)
{
#define CASE(CODE) \
case VIRTIO_SND_R_##CODE: \
return "VIRTIO_SND_R_"#CODE
switch (code) {
CASE(JACK_INFO);
CASE(JACK_REMAP);
CASE(PCM_INFO);
CASE(PCM_SET_PARAMS);
CASE(PCM_PREPARE);
CASE(PCM_RELEASE);
CASE(PCM_START);
CASE(PCM_STOP);
CASE(CHMAP_INFO);
default:
return "invalid code";
}
#undef CASE
};
+/*
+ * Handles VIRTIO_SND_R_PCM_START.
+ *
+ * @s: VirtIOSound device
+ * @cmd: The request command queue element from VirtIOSound cmdq field
+ * @start: whether to start or stop the device
+ */
+static void virtio_snd_handle_pcm_start_stop(VirtIOSound *s,
+ virtio_snd_ctrl_command *cmd,
+ bool start)
+{
+ VirtIOSoundPCMStream *stream;
+ virtio_snd_pcm_hdr req;
+ uint32_t stream_id;
+ size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
+ cmd->elem->out_num,
+ 0,
+ &req,
+ sizeof(virtio_snd_pcm_hdr));
+
+ if (msg_sz != sizeof(virtio_snd_pcm_hdr)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: virtio-snd command size incorrect %zu vs \
+ %zu\n", __func__, msg_sz, sizeof(virtio_snd_pcm_hdr));
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ return;
+ }
+
+ stream_id = le32_to_cpu(req.stream_id);
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
+ trace_virtio_snd_handle_pcm_start_stop(start ? "VIRTIO_SND_R_PCM_START" :
+ "VIRTIO_SND_R_PCM_STOP", stream_id);
+ stream = virtio_snd_pcm_get_stream(s, stream_id);
+ if (stream == NULL) {
+ error_report("Invalid stream id: %"PRIu32, req.stream_id);
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ return;
+ }
+ stream->active = start;
+}
+
/*
* The actual processing done in virtio_snd_process_cmdq().
*
* @s: VirtIOSound device
* @cmd: control command request
*/
@@ -456,66 +497,70 @@ static inline void
process_cmd(VirtIOSound *s, virtio_snd_ctrl_command *cmd)
{
uint32_t code;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
0,
&cmd->ctrl,
sizeof(virtio_snd_hdr));
if (msg_sz != sizeof(virtio_snd_hdr)) {
/*
* TODO: do we need to set DEVICE_NEEDS_RESET?
*/
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(virtio_snd_hdr));
return;
}
code = le32_to_cpu(cmd->ctrl.code);
trace_virtio_snd_handle_code(code, print_code(code));
switch (code) {
case VIRTIO_SND_R_JACK_INFO:
case VIRTIO_SND_R_JACK_REMAP:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: jack functionality is unimplemented.\n");
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_PCM_INFO:
virtio_snd_handle_pcm_info(s, cmd);
break;
- case VIRTIO_SND_R_PCM_SET_PARAMS:
- case VIRTIO_SND_R_PCM_PREPARE:
case VIRTIO_SND_R_PCM_START:
+ virtio_snd_handle_pcm_start_stop(s, cmd, true);
+ break;
case VIRTIO_SND_R_PCM_STOP:
+ virtio_snd_handle_pcm_start_stop(s, cmd, false);
+ break;
+ case VIRTIO_SND_R_PCM_SET_PARAMS:
+ case VIRTIO_SND_R_PCM_PREPARE:
case VIRTIO_SND_R_PCM_RELEASE:
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_CHMAP_INFO:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: chmap info functionality is unimplemented.\n");
trace_virtio_snd_handle_chmap_info();
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
default:
/* error */
error_report("virtio snd header not recognized: %"PRIu32, code);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
iov_from_buf(cmd->elem->in_sg,
cmd->elem->in_num,
0,
&cmd->resp,
sizeof(virtio_snd_hdr));
virtqueue_push(cmd->vq, cmd->elem, sizeof(virtio_snd_hdr));
virtio_notify(VIRTIO_DEVICE(s), cmd->vq);
}
/*
* Consume all elements in command queue.
*
* @s: VirtIOSound device
*/
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 06/11] virtio-sound: handle VIRTIO_SND_R_PCM_SET_PARAMS
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (4 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 05/11] virtio-sound: handle VIRTIO_SND_R_PCM_{START,STOP} Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 07/11] virtio-sound: handle VIRTIO_SND_R_PCM_PREPARE Manos Pitsidianakis
` (5 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Handle the set parameters control request. It reconfigures a stream
based on a guest's preference if the values are valid and supported.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/virtio/trace-events | 1 +
hw/virtio/virtio-snd.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 35 insertions(+)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 7044b110b7..7907b610c1 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -163,6 +163,7 @@ virtio_snd_vm_state_running(void) "vm state running"
virtio_snd_vm_state_stopped(void) "vm state stopped"
virtio_snd_realize(void *snd) "snd %p: realize"
virtio_snd_unrealize(void *snd) "snd %p: unrealize"
+virtio_snd_handle_pcm_set_params(uint32_t stream) "VIRTIO_SND_PCM_SET_PARAMS called for stream %"PRIu32
virtio_snd_handle_ctrl(void *vdev, void *vq) "snd %p: handle ctrl event for queue %p"
virtio_snd_handle_pcm_info(uint32_t stream) "VIRTIO_SND_R_PCM_INFO called for stream %"PRIu32
virtio_snd_handle_pcm_start_stop(const char *code, uint32_t stream) "%s called for stream %"PRIu32
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index 50b5a9d5df..6a7545536b 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -250,43 +250,75 @@ static
uint32_t virtio_snd_set_pcm_params(VirtIOSound *s,
uint32_t stream_id,
virtio_snd_pcm_set_params *params)
{
virtio_snd_pcm_set_params *st_params;
if (stream_id >= s->snd_conf.streams || s->pcm->pcm_params == NULL) {
/*
* TODO: do we need to set DEVICE_NEEDS_RESET?
*/
virtio_error(VIRTIO_DEVICE(s), "Streams have not been initialized.\n");
return cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
st_params = virtio_snd_pcm_get_params(s, stream_id);
if (params->channels < 1 || params->channels > AUDIO_MAX_CHANNELS) {
error_report("Number of channels is not supported.");
return cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
}
if (!(supported_formats & BIT(params->format))) {
error_report("Stream format is not supported.");
return cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
}
if (!(supported_rates & BIT(params->rate))) {
error_report("Stream rate is not supported.");
return cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
}
st_params->buffer_bytes = le32_to_cpu(params->buffer_bytes);
st_params->period_bytes = le32_to_cpu(params->period_bytes);
st_params->features = le32_to_cpu(params->features);
/* the following are uint8_t, so there's no need to bswap the values. */
st_params->channels = params->channels;
st_params->format = params->format;
st_params->rate = params->rate;
return cpu_to_le32(VIRTIO_SND_S_OK);
}
+/*
+ * Handles the VIRTIO_SND_R_PCM_SET_PARAMS request.
+ *
+ * @s: VirtIOSound device
+ * @cmd: The request command queue element from VirtIOSound cmdq field
+ */
+static void virtio_snd_handle_pcm_set_params(VirtIOSound *s,
+ virtio_snd_ctrl_command *cmd)
+{
+ virtio_snd_pcm_set_params req = { 0 };
+ uint32_t stream_id;
+ size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
+ cmd->elem->out_num,
+ 0,
+ &req,
+ sizeof(virtio_snd_pcm_set_params));
+
+ if (msg_sz != sizeof(virtio_snd_pcm_set_params)) {
+ /*
+ * TODO: do we need to set DEVICE_NEEDS_RESET?
+ */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: virtio-snd command size incorrect %zu vs \
+ %zu\n", __func__, msg_sz, sizeof(virtio_snd_pcm_set_params));
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ return;
+ }
+ stream_id = le32_to_cpu(req.hdr.stream_id);
+ trace_virtio_snd_handle_pcm_set_params(stream_id);
+ cmd->resp.code = virtio_snd_set_pcm_params(s, stream_id, &req);
+}
+
/*
* Get a QEMU Audiosystem compatible format value from a VIRTIO_SND_PCM_FMT_*
*/
@@ -497,70 +529,72 @@ static inline void
process_cmd(VirtIOSound *s, virtio_snd_ctrl_command *cmd)
{
uint32_t code;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
0,
&cmd->ctrl,
sizeof(virtio_snd_hdr));
if (msg_sz != sizeof(virtio_snd_hdr)) {
/*
* TODO: do we need to set DEVICE_NEEDS_RESET?
*/
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(virtio_snd_hdr));
return;
}
code = le32_to_cpu(cmd->ctrl.code);
trace_virtio_snd_handle_code(code, print_code(code));
switch (code) {
case VIRTIO_SND_R_JACK_INFO:
case VIRTIO_SND_R_JACK_REMAP:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: jack functionality is unimplemented.\n");
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_PCM_INFO:
virtio_snd_handle_pcm_info(s, cmd);
break;
case VIRTIO_SND_R_PCM_START:
virtio_snd_handle_pcm_start_stop(s, cmd, true);
break;
case VIRTIO_SND_R_PCM_STOP:
virtio_snd_handle_pcm_start_stop(s, cmd, false);
break;
case VIRTIO_SND_R_PCM_SET_PARAMS:
+ virtio_snd_handle_pcm_set_params(s, cmd);
+ break;
case VIRTIO_SND_R_PCM_PREPARE:
case VIRTIO_SND_R_PCM_RELEASE:
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_CHMAP_INFO:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: chmap info functionality is unimplemented.\n");
trace_virtio_snd_handle_chmap_info();
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
default:
/* error */
error_report("virtio snd header not recognized: %"PRIu32, code);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
iov_from_buf(cmd->elem->in_sg,
cmd->elem->in_num,
0,
&cmd->resp,
sizeof(virtio_snd_hdr));
virtqueue_push(cmd->vq, cmd->elem, sizeof(virtio_snd_hdr));
virtio_notify(VIRTIO_DEVICE(s), cmd->vq);
}
/*
* Consume all elements in command queue.
*
* @s: VirtIOSound device
*/
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 07/11] virtio-sound: handle VIRTIO_SND_R_PCM_PREPARE
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (5 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 06/11] virtio-sound: handle VIRTIO_SND_R_PCM_SET_PARAMS Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 08/11] virtio-sound: handle VIRTIO_SND_R_PCM_RELEASE Manos Pitsidianakis
` (4 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Handles the PCM prepare control request. It initializes a PCM stream
when the guests asks for it.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/virtio/virtio-snd.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index 6a7545536b..49cd9f3ca4 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -458,30 +458,52 @@ static uint32_t virtio_snd_pcm_prepare(VirtIOSound *s, uint32_t stream_id)
static const char *print_code(uint32_t code)
{
#define CASE(CODE) \
case VIRTIO_SND_R_##CODE: \
return "VIRTIO_SND_R_"#CODE
switch (code) {
CASE(JACK_INFO);
CASE(JACK_REMAP);
CASE(PCM_INFO);
CASE(PCM_SET_PARAMS);
CASE(PCM_PREPARE);
CASE(PCM_RELEASE);
CASE(PCM_START);
CASE(PCM_STOP);
CASE(CHMAP_INFO);
default:
return "invalid code";
}
#undef CASE
};
+/*
+ * Handles VIRTIO_SND_R_PCM_PREPARE.
+ *
+ * @s: VirtIOSound device
+ * @cmd: The request command queue element from VirtIOSound cmdq field
+ */
+static void virtio_snd_handle_pcm_prepare(VirtIOSound *s,
+ virtio_snd_ctrl_command *cmd)
+{
+ uint32_t stream_id;
+ size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
+ cmd->elem->out_num,
+ sizeof(virtio_snd_hdr),
+ &stream_id,
+ sizeof(stream_id));
+
+ stream_id = le32_to_cpu(stream_id);
+ cmd->resp.code = msg_sz == sizeof(stream_id)
+ ? virtio_snd_pcm_prepare(s, stream_id)
+ : cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+}
+
/*
* Handles VIRTIO_SND_R_PCM_START.
*
* @s: VirtIOSound device
* @cmd: The request command queue element from VirtIOSound cmdq field
* @start: whether to start or stop the device
*/
@@ -529,72 +551,74 @@ static inline void
process_cmd(VirtIOSound *s, virtio_snd_ctrl_command *cmd)
{
uint32_t code;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
0,
&cmd->ctrl,
sizeof(virtio_snd_hdr));
if (msg_sz != sizeof(virtio_snd_hdr)) {
/*
* TODO: do we need to set DEVICE_NEEDS_RESET?
*/
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(virtio_snd_hdr));
return;
}
code = le32_to_cpu(cmd->ctrl.code);
trace_virtio_snd_handle_code(code, print_code(code));
switch (code) {
case VIRTIO_SND_R_JACK_INFO:
case VIRTIO_SND_R_JACK_REMAP:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: jack functionality is unimplemented.\n");
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_PCM_INFO:
virtio_snd_handle_pcm_info(s, cmd);
break;
case VIRTIO_SND_R_PCM_START:
virtio_snd_handle_pcm_start_stop(s, cmd, true);
break;
case VIRTIO_SND_R_PCM_STOP:
virtio_snd_handle_pcm_start_stop(s, cmd, false);
break;
case VIRTIO_SND_R_PCM_SET_PARAMS:
virtio_snd_handle_pcm_set_params(s, cmd);
break;
case VIRTIO_SND_R_PCM_PREPARE:
+ virtio_snd_handle_pcm_prepare(s, cmd);
+ break;
case VIRTIO_SND_R_PCM_RELEASE:
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_CHMAP_INFO:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: chmap info functionality is unimplemented.\n");
trace_virtio_snd_handle_chmap_info();
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
default:
/* error */
error_report("virtio snd header not recognized: %"PRIu32, code);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
iov_from_buf(cmd->elem->in_sg,
cmd->elem->in_num,
0,
&cmd->resp,
sizeof(virtio_snd_hdr));
virtqueue_push(cmd->vq, cmd->elem, sizeof(virtio_snd_hdr));
virtio_notify(VIRTIO_DEVICE(s), cmd->vq);
}
/*
* Consume all elements in command queue.
*
* @s: VirtIOSound device
*/
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 08/11] virtio-sound: handle VIRTIO_SND_R_PCM_RELEASE
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (6 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 07/11] virtio-sound: handle VIRTIO_SND_R_PCM_PREPARE Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 09/11] virtio-sound: implement audio output (TX) Manos Pitsidianakis
` (3 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Handle the PCM release control request, which is necessary for flushing
pending sound IO. No IO is handled yet so currently it only replies to
the request.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/virtio/trace-events | 1 +
hw/virtio/virtio-snd.c | 48 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 48 insertions(+), 1 deletion(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index 7907b610c1..b0789a6e7e 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -167,6 +167,7 @@ virtio_snd_handle_pcm_set_params(uint32_t stream) "VIRTIO_SND_PCM_SET_PARAMS cal
virtio_snd_handle_ctrl(void *vdev, void *vq) "snd %p: handle ctrl event for queue %p"
virtio_snd_handle_pcm_info(uint32_t stream) "VIRTIO_SND_R_PCM_INFO called for stream %"PRIu32
virtio_snd_handle_pcm_start_stop(const char *code, uint32_t stream) "%s called for stream %"PRIu32
+virtio_snd_handle_pcm_release(uint32_t stream) "VIRTIO_SND_PCM_RELEASE called for stream %"PRIu32
virtio_snd_handle_code(uint32_t val, const char *code) "ctrl code msg val = %"PRIu32" == %s"
virtio_snd_handle_chmap_info(void) "VIRTIO_SND_CHMAP_INFO called"
virtio_snd_handle_event(void) "event queue callback called"
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index 49cd9f3ca4..ca873fd6d4 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -503,47 +503,93 @@ static void virtio_snd_handle_pcm_prepare(VirtIOSound *s,
/*
* Handles VIRTIO_SND_R_PCM_START.
*
* @s: VirtIOSound device
* @cmd: The request command queue element from VirtIOSound cmdq field
* @start: whether to start or stop the device
*/
static void virtio_snd_handle_pcm_start_stop(VirtIOSound *s,
virtio_snd_ctrl_command *cmd,
bool start)
{
VirtIOSoundPCMStream *stream;
virtio_snd_pcm_hdr req;
uint32_t stream_id;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
0,
&req,
sizeof(virtio_snd_pcm_hdr));
if (msg_sz != sizeof(virtio_snd_pcm_hdr)) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(virtio_snd_pcm_hdr));
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
return;
}
stream_id = le32_to_cpu(req.stream_id);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
trace_virtio_snd_handle_pcm_start_stop(start ? "VIRTIO_SND_R_PCM_START" :
"VIRTIO_SND_R_PCM_STOP", stream_id);
stream = virtio_snd_pcm_get_stream(s, stream_id);
if (stream == NULL) {
error_report("Invalid stream id: %"PRIu32, req.stream_id);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
return;
}
stream->active = start;
}
+/*
+ * Handles VIRTIO_SND_R_PCM_RELEASE. Releases the buffer resources allocated to
+ * a stream.
+ *
+ * @s: VirtIOSound device
+ * @cmd: The request command queue element from VirtIOSound cmdq field
+ */
+static void virtio_snd_handle_pcm_release(VirtIOSound *s,
+ virtio_snd_ctrl_command *cmd)
+{
+ uint32_t stream_id;
+ VirtIOSoundPCMStream *stream;
+ size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
+ cmd->elem->out_num,
+ sizeof(virtio_snd_hdr),
+ &stream_id,
+ sizeof(stream_id));
+
+ if (msg_sz != sizeof(stream_id)) {
+ /*
+ * TODO: do we need to set DEVICE_NEEDS_RESET?
+ */
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: virtio-snd command size incorrect %zu vs \
+ %zu\n", __func__, msg_sz, sizeof(stream_id));
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ return;
+ }
+
+ stream_id = le32_to_cpu(stream_id);
+ trace_virtio_snd_handle_pcm_release(stream_id);
+ stream = virtio_snd_pcm_get_stream(s, stream_id);
+ if (stream == NULL) {
+ /*
+ * TODO: do we need to set DEVICE_NEEDS_RESET?
+ */
+ error_report("already released stream %"PRIu32, stream_id);
+ virtio_error(VIRTIO_DEVICE(s),
+ "already released stream %"PRIu32,
+ stream_id);
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ return;
+ }
+ cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
+}
+
/*
* The actual processing done in virtio_snd_process_cmdq().
*
* @s: VirtIOSound device
* @cmd: control command request
*/
@@ -551,74 +597,74 @@ static inline void
process_cmd(VirtIOSound *s, virtio_snd_ctrl_command *cmd)
{
uint32_t code;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
0,
&cmd->ctrl,
sizeof(virtio_snd_hdr));
if (msg_sz != sizeof(virtio_snd_hdr)) {
/*
* TODO: do we need to set DEVICE_NEEDS_RESET?
*/
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(virtio_snd_hdr));
return;
}
code = le32_to_cpu(cmd->ctrl.code);
trace_virtio_snd_handle_code(code, print_code(code));
switch (code) {
case VIRTIO_SND_R_JACK_INFO:
case VIRTIO_SND_R_JACK_REMAP:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: jack functionality is unimplemented.\n");
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
case VIRTIO_SND_R_PCM_INFO:
virtio_snd_handle_pcm_info(s, cmd);
break;
case VIRTIO_SND_R_PCM_START:
virtio_snd_handle_pcm_start_stop(s, cmd, true);
break;
case VIRTIO_SND_R_PCM_STOP:
virtio_snd_handle_pcm_start_stop(s, cmd, false);
break;
case VIRTIO_SND_R_PCM_SET_PARAMS:
virtio_snd_handle_pcm_set_params(s, cmd);
break;
case VIRTIO_SND_R_PCM_PREPARE:
virtio_snd_handle_pcm_prepare(s, cmd);
break;
case VIRTIO_SND_R_PCM_RELEASE:
- cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
+ virtio_snd_handle_pcm_release(s, cmd);
break;
case VIRTIO_SND_R_CHMAP_INFO:
qemu_log_mask(LOG_UNIMP,
"virtio_snd: chmap info functionality is unimplemented.\n");
trace_virtio_snd_handle_chmap_info();
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_NOT_SUPP);
break;
default:
/* error */
error_report("virtio snd header not recognized: %"PRIu32, code);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
iov_from_buf(cmd->elem->in_sg,
cmd->elem->in_num,
0,
&cmd->resp,
sizeof(virtio_snd_hdr));
virtqueue_push(cmd->vq, cmd->elem, sizeof(virtio_snd_hdr));
virtio_notify(VIRTIO_DEVICE(s), cmd->vq);
}
/*
* Consume all elements in command queue.
*
* @s: VirtIOSound device
*/
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 09/11] virtio-sound: implement audio output (TX)
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (7 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 08/11] virtio-sound: handle VIRTIO_SND_R_PCM_RELEASE Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 10/11] virtio-sound: implement audio capture (RX) Manos Pitsidianakis
` (2 subsequent siblings)
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Handle output IO messages in the transmit (TX) virtqueue.
It allocates a VirtIOSoundPCMBuffer for each IO message and copies the
data buffer to it. When the IO buffer is written to the host's sound
card, the guest will be notified that it has been consumed.
The lifetime of an IO message is:
1. Guest sends IO message to TX virtqueue.
2. QEMU adds it to the appropriate stream's IO buffer queue.
3. Sometime later, the host audio backend calls the output callback,
virtio_snd_pcm_out_cb(), which is defined with an AUD_open_out()
call. The callback gets an available number of bytes the backend can
receive. Then it writes data from the IO buffer queue to the backend.
If at any time a buffer is exhausted, it is returned to the guest as
completed.
4. If the guest releases the stream, its buffer queue is flushed by
attempting to write any leftover data to the audio backend and
releasing all IO messages back to the guest. This is how according to
the spec the guest knows the release was successful.
Based-on: https://github.com/OpenSynergy/qemu/commit/5a2f350eec5d157b90d9c7b40a8e603f4da92471
Signed-off-by: Igor Skalkin <Igor.Skalkin@opensynergy.com>
Signed-off-by: Anton Yakovlev <Anton.Yakovlev@opensynergy.com>
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/virtio/trace-events | 2 +
hw/virtio/virtio-snd.c | 288 ++++++++++++++++++++++++++++++++-
include/hw/virtio/virtio-snd.h | 47 ++++++
3 files changed, 332 insertions(+), 5 deletions(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index b0789a6e7e..a31531970d 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -171,3 +171,5 @@ virtio_snd_handle_pcm_release(uint32_t stream) "VIRTIO_SND_PCM_RELEASE called fo
virtio_snd_handle_code(uint32_t val, const char *code) "ctrl code msg val = %"PRIu32" == %s"
virtio_snd_handle_chmap_info(void) "VIRTIO_SND_CHMAP_INFO called"
virtio_snd_handle_event(void) "event queue callback called"
+virtio_snd_pcm_stream_flush(uint32_t stream) "flushing stream %"PRIu32
+virtio_snd_handle_xfer(void) "tx/rx queue callback called"
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index ca873fd6d4..5e9513fb26 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -32,6 +32,10 @@
#define VIRTIO_SOUND_CHMAP_DEFAULT 0
#define VIRTIO_SOUND_HDA_FN_NID 0
+static void virtio_snd_pcm_out_cb(void *data, int available);
+static void virtio_snd_process_cmdq(VirtIOSound *s);
+static void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream);
+
static uint32_t supported_formats = BIT(VIRTIO_SND_PCM_FMT_S8)
| BIT(VIRTIO_SND_PCM_FMT_U8)
| BIT(VIRTIO_SND_PCM_FMT_S16)
@@ -123,6 +127,13 @@ virtio_snd_set_config(VirtIODevice *vdev, const uint8_t *config)
}
+static void
+virtio_snd_pcm_buffer_free(VirtIOSoundPCMBuffer *buffer)
+{
+ g_free(buffer->elem);
+ g_free(buffer);
+}
+
static void
virtio_snd_ctrl_cmd_free(virtio_snd_ctrl_command *cmd)
{
@@ -392,66 +403,88 @@ static void virtio_snd_get_qemu_audsettings(audsettings *as,
/*
* Close a stream and free all its resources.
*
* @stream: VirtIOSoundPCMStream *stream
*/
static void virtio_snd_pcm_close(VirtIOSoundPCMStream *stream)
{
+ if (stream) {
+ if (stream->info.direction == VIRTIO_SND_D_OUTPUT) {
+ virtio_snd_pcm_flush(stream);
+ AUD_close_out(&stream->pcm->snd->card, stream->voice.out);
+ stream->voice.out = NULL;
+ }
+ }
}
/*
* Prepares a VirtIOSound card stream.
* Returns the response status code. (VIRTIO_SND_S_*).
*
* @s: VirtIOSound device
* @stream_id: stream id
*/
static uint32_t virtio_snd_pcm_prepare(VirtIOSound *s, uint32_t stream_id)
{
audsettings as;
virtio_snd_pcm_set_params *params;
VirtIOSoundPCMStream *stream;
if (s->pcm->streams == NULL ||
s->pcm->pcm_params == NULL ||
stream_id >= s->snd_conf.streams) {
return cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
params = virtio_snd_pcm_get_params(s, stream_id);
if (params == NULL) {
return cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
stream = virtio_snd_pcm_get_stream(s, stream_id);
if (stream == NULL) {
stream = g_new0(VirtIOSoundPCMStream, 1);
stream->active = false;
stream->id = stream_id;
stream->pcm = s->pcm;
stream->s = s;
+ qemu_mutex_init(&stream->queue_mutex);
+ QSIMPLEQ_INIT(&stream->queue);
+ QSIMPLEQ_INIT(&stream->invalid);
/*
* stream_id >= s->snd_conf.streams was checked before so this is
* in-bounds
*/
s->pcm->streams[stream_id] = stream;
}
virtio_snd_get_qemu_audsettings(&as, params);
stream->info.direction = stream_id < s->snd_conf.streams / 2 +
(s->snd_conf.streams & 1) ? VIRTIO_SND_D_OUTPUT : VIRTIO_SND_D_INPUT;
stream->info.hdr.hda_fn_nid = VIRTIO_SOUND_HDA_FN_NID;
stream->info.features = 0;
stream->info.channels_min = 1;
stream->info.channels_max = as.nchannels;
stream->info.formats = supported_formats;
stream->info.rates = supported_rates;
stream->params = *params;
stream->positions[0] = VIRTIO_SND_CHMAP_FL;
stream->positions[1] = VIRTIO_SND_CHMAP_FR;
stream->as = as;
+ if (stream->info.direction == VIRTIO_SND_D_OUTPUT) {
+ stream->voice.out = AUD_open_out(&s->card,
+ stream->voice.out,
+ "virtio-sound.out",
+ stream,
+ virtio_snd_pcm_out_cb,
+ &as);
+ AUD_set_volume_out(stream->voice.out, 0, 255, 255);
+ } else {
+ qemu_log_mask(LOG_UNIMP, "virtio_snd: input/capture is unimplemented.");
+ }
+
return cpu_to_le32(VIRTIO_SND_S_OK);
}
@@ -503,93 +536,136 @@ static void virtio_snd_handle_pcm_prepare(VirtIOSound *s,
/*
* Handles VIRTIO_SND_R_PCM_START.
*
* @s: VirtIOSound device
* @cmd: The request command queue element from VirtIOSound cmdq field
* @start: whether to start or stop the device
*/
static void virtio_snd_handle_pcm_start_stop(VirtIOSound *s,
virtio_snd_ctrl_command *cmd,
bool start)
{
VirtIOSoundPCMStream *stream;
virtio_snd_pcm_hdr req;
uint32_t stream_id;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
0,
&req,
sizeof(virtio_snd_pcm_hdr));
if (msg_sz != sizeof(virtio_snd_pcm_hdr)) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(virtio_snd_pcm_hdr));
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
return;
}
stream_id = le32_to_cpu(req.stream_id);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
trace_virtio_snd_handle_pcm_start_stop(start ? "VIRTIO_SND_R_PCM_START" :
"VIRTIO_SND_R_PCM_STOP", stream_id);
+
stream = virtio_snd_pcm_get_stream(s, stream_id);
- if (stream == NULL) {
- error_report("Invalid stream id: %"PRIu32, req.stream_id);
+ if (stream) {
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ stream->active = start;
+ }
+ if (stream->info.direction == VIRTIO_SND_D_OUTPUT) {
+ AUD_set_active_out(stream->voice.out, start);
+ }
+ } else {
+ error_report("Invalid stream id: %"PRIu32, stream_id);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
return;
}
stream->active = start;
}
/*
- * Handles VIRTIO_SND_R_PCM_RELEASE. Releases the buffer resources allocated to
- * a stream.
+ * Returns the number of I/O messages that are being processed.
+ *
+ * @stream: VirtIOSoundPCMStream
+ */
+static size_t virtio_snd_pcm_get_io_msgs_count(VirtIOSoundPCMStream *stream)
+{
+ VirtIOSoundPCMBuffer *buffer, *next;
+ size_t count = 0;
+
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ QSIMPLEQ_FOREACH_SAFE(buffer, &stream->queue, entry, next) {
+ count += 1;
+ }
+ QSIMPLEQ_FOREACH_SAFE(buffer, &stream->invalid, entry, next) {
+ count += 1;
+ }
+ }
+ return count;
+}
+
+/*
+ * Handles VIRTIO_SND_R_PCM_RELEASE.
*
* @s: VirtIOSound device
* @cmd: The request command queue element from VirtIOSound cmdq field
*/
static void virtio_snd_handle_pcm_release(VirtIOSound *s,
virtio_snd_ctrl_command *cmd)
{
uint32_t stream_id;
VirtIOSoundPCMStream *stream;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
sizeof(virtio_snd_hdr),
&stream_id,
sizeof(stream_id));
if (msg_sz != sizeof(stream_id)) {
/*
* TODO: do we need to set DEVICE_NEEDS_RESET?
*/
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(stream_id));
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
return;
}
stream_id = le32_to_cpu(stream_id);
trace_virtio_snd_handle_pcm_release(stream_id);
stream = virtio_snd_pcm_get_stream(s, stream_id);
if (stream == NULL) {
/*
* TODO: do we need to set DEVICE_NEEDS_RESET?
*/
error_report("already released stream %"PRIu32, stream_id);
virtio_error(VIRTIO_DEVICE(s),
"already released stream %"PRIu32,
stream_id);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
return;
}
+
+ if (virtio_snd_pcm_get_io_msgs_count(stream)) {
+ /*
+ * virtio-v1.2-csd01, 5.14.6.6.5.1,
+ * Device Requirements: Stream Release
+ *
+ * - The device MUST complete all pending I/O messages for the
+ * specified stream ID.
+ * - The device MUST NOT complete the control request while there
+ * are pending I/O messages for the specified stream ID.
+ */
+ trace_virtio_snd_pcm_stream_flush(stream_id);
+ virtio_snd_pcm_flush(stream);
+ }
+
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
}
/*
* The actual processing done in virtio_snd_process_cmdq().
*
* @s: VirtIOSound device
* @cmd: control command request
*/
@@ -728,19 +804,121 @@ static void virtio_snd_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
/*
* The event virtqueue handler.
* Not implemented yet.
*
* @vdev: VirtIOSound device
* @vq: event vq
*/
static void virtio_snd_handle_event(VirtIODevice *vdev, VirtQueue *vq)
{
qemu_log_mask(LOG_UNIMP, "virtio_snd: event queue is unimplemented.\n");
trace_virtio_snd_handle_event();
}
+/*
+ * The tx virtqueue handler. Makes the buffers available to their respective
+ * streams for consumption.
+ *
+ * @vdev: VirtIOSound device
+ * @vq: tx virtqueue
+ */
+static void virtio_snd_handle_tx(VirtIODevice *vdev, VirtQueue *vq)
+{
+ VirtIOSound *s = VIRTIO_SND(vdev);
+ VirtIOSoundPCMStream *stream = NULL;
+ VirtIOSoundPCMBuffer *buffer;
+ VirtQueueElement *elem;
+ size_t msg_sz, size;
+ virtio_snd_pcm_xfer hdr;
+ virtio_snd_pcm_status resp = { 0 };
+ uint32_t stream_id;
+ /*
+ * If any of the I/O messages are invalid, put them in stream->invalid and
+ * return them after the for loop.
+ */
+ bool must_empty_invalid_queue = false;
+
+ if (!virtio_queue_ready(vq)) {
+ return;
+ }
+ trace_virtio_snd_handle_xfer();
+
+ for (;;) {
+ elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
+ if (!elem) {
+ break;
+ }
+ /* get the message hdr object */
+ msg_sz = iov_to_buf(elem->out_sg,
+ elem->out_num,
+ 0,
+ &hdr,
+ sizeof(virtio_snd_pcm_xfer));
+ if (msg_sz != sizeof(virtio_snd_pcm_xfer)) {
+ goto tx_err;
+ }
+ stream_id = le32_to_cpu(hdr.stream_id);
+
+ if (stream_id >= s->snd_conf.streams
+ || s->pcm->streams[stream_id] == NULL) {
+ goto tx_err;
+ }
+
+ stream = s->pcm->streams[stream_id];
+ if (stream->info.direction != VIRTIO_SND_D_OUTPUT) {
+ goto tx_err;
+ }
+
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ size = iov_size(elem->out_sg, elem->out_num) - msg_sz;
+
+ buffer = g_malloc0(sizeof(VirtIOSoundPCMBuffer) + size);
+ buffer->elem = elem;
+ buffer->populated = false;
+ buffer->vq = vq;
+ buffer->size = size;
+ buffer->offset = 0;
+
+ QSIMPLEQ_INSERT_TAIL(&stream->queue, buffer, entry);
+ }
+ continue;
+
+tx_err:
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ must_empty_invalid_queue = true;
+ buffer = g_malloc0(sizeof(VirtIOSoundPCMBuffer));
+ buffer->elem = elem;
+ buffer->vq = vq;
+ QSIMPLEQ_INSERT_TAIL(&stream->invalid, buffer, entry);
+ }
+ }
+
+ if (must_empty_invalid_queue) {
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ while (!QSIMPLEQ_EMPTY(&stream->invalid)) {
+ buffer = QSIMPLEQ_FIRST(&stream->invalid);
+
+ resp.status = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ iov_from_buf(buffer->elem->in_sg,
+ buffer->elem->in_num,
+ 0,
+ &resp,
+ sizeof(virtio_snd_pcm_status));
+ virtqueue_push(vq, buffer->elem, sizeof(virtio_snd_pcm_status));
+ QSIMPLEQ_REMOVE_HEAD(&stream->invalid, entry);
+ virtio_snd_pcm_buffer_free(buffer);
+ }
+ /*
+ * Notify vq about virtio_snd_pcm_status responses.
+ * Buffer responses must be notified separately later.
+ */
+ virtio_notify(vdev, vq);
+ }
+ }
+}
+
/*
* Stub buffer virtqueue handler.
*
* @vdev: VirtIOSound device
* @vq: virtqueue
*/
@@ -776,116 +954,216 @@ virtio_snd_vm_state_change(void *opaque, bool running,
static void virtio_snd_realize(DeviceState *dev, Error **errp)
{
ERRP_GUARD();
VirtIOSound *vsnd = VIRTIO_SND(dev);
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
virtio_snd_pcm_set_params default_params = { 0 };
uint32_t status;
vsnd->pcm = NULL;
vsnd->vmstate =
qemu_add_vm_change_state_handler(virtio_snd_vm_state_change, vsnd);
trace_virtio_snd_realize(vsnd);
vsnd->pcm = g_new0(VirtIOSoundPCM, 1);
vsnd->pcm->snd = vsnd;
vsnd->pcm->streams =
g_new0(VirtIOSoundPCMStream *, vsnd->snd_conf.streams);
vsnd->pcm->pcm_params =
g_new0(virtio_snd_pcm_set_params, vsnd->snd_conf.streams);
virtio_init(vdev, VIRTIO_ID_SOUND, sizeof(virtio_snd_config));
virtio_add_feature(&vsnd->features, VIRTIO_F_VERSION_1);
/* set number of jacks and streams */
if (vsnd->snd_conf.jacks > 8) {
error_setg(errp,
"Invalid number of jacks: %"PRIu32,
vsnd->snd_conf.jacks);
return;
}
if (vsnd->snd_conf.streams < 1 || vsnd->snd_conf.streams > 10) {
error_setg(errp,
"Invalid number of streams: %"PRIu32,
vsnd->snd_conf.streams);
return;
}
if (vsnd->snd_conf.chmaps > VIRTIO_SND_CHMAP_MAX_SIZE) {
error_setg(errp,
"Invalid number of channel maps: %"PRIu32,
vsnd->snd_conf.chmaps);
return;
}
AUD_register_card("virtio-sound", &vsnd->card, errp);
/* set default params for all streams */
default_params.features = 0;
default_params.buffer_bytes = cpu_to_le32(8192);
default_params.period_bytes = cpu_to_le32(2048);
default_params.channels = 2;
default_params.format = VIRTIO_SND_PCM_FMT_S16;
default_params.rate = VIRTIO_SND_PCM_RATE_48000;
vsnd->queues[VIRTIO_SND_VQ_CONTROL] =
virtio_add_queue(vdev, 64, virtio_snd_handle_ctrl);
vsnd->queues[VIRTIO_SND_VQ_EVENT] =
virtio_add_queue(vdev, 64, virtio_snd_handle_event);
vsnd->queues[VIRTIO_SND_VQ_TX] =
- virtio_add_queue(vdev, 64, virtio_snd_handle_xfer);
+ virtio_add_queue(vdev, 64, virtio_snd_handle_tx);
vsnd->queues[VIRTIO_SND_VQ_RX] =
virtio_add_queue(vdev, 64, virtio_snd_handle_xfer);
qemu_mutex_init(&vsnd->cmdq_mutex);
QTAILQ_INIT(&vsnd->cmdq);
for (uint32_t i = 0; i < vsnd->snd_conf.streams; i++) {
status = virtio_snd_set_pcm_params(vsnd, i, &default_params);
if (status != cpu_to_le32(VIRTIO_SND_S_OK)) {
error_setg(errp,
"Can't initalize stream params, device responded with %s.",
print_code(status));
return;
}
status = virtio_snd_pcm_prepare(vsnd, i);
if (status != cpu_to_le32(VIRTIO_SND_S_OK)) {
error_setg(errp,
"Can't prepare streams, device responded with %s.",
print_code(status));
return;
}
}
}
+static inline void return_tx_buffer(VirtIOSoundPCMStream *stream,
+ VirtIOSoundPCMBuffer *buffer)
+{
+ virtio_snd_pcm_status resp = { 0 };
+ resp.status = cpu_to_le32(VIRTIO_SND_S_OK);
+ resp.latency_bytes = cpu_to_le32((uint32_t)buffer->size);
+ iov_from_buf(buffer->elem->in_sg,
+ buffer->elem->in_num,
+ 0,
+ &resp,
+ sizeof(virtio_snd_pcm_status));
+ virtqueue_push(buffer->vq,
+ buffer->elem,
+ sizeof(virtio_snd_pcm_status));
+ virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq);
+ QSIMPLEQ_REMOVE(&stream->queue,
+ buffer,
+ VirtIOSoundPCMBuffer,
+ entry);
+ virtio_snd_pcm_buffer_free(buffer);
+}
+
+/*
+ * AUD_* output callback.
+ *
+ * @data: VirtIOSoundPCMStream stream
+ * @available: number of bytes that can be written with AUD_write()
+ */
+static void virtio_snd_pcm_out_cb(void *data, int available)
+{
+ VirtIOSoundPCMStream *stream = data;
+ VirtIOSoundPCMBuffer *buffer;
+ size_t size;
+
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ while (!QSIMPLEQ_EMPTY(&stream->queue)) {
+ buffer = QSIMPLEQ_FIRST(&stream->queue);
+ if (!virtio_queue_ready(buffer->vq)) {
+ return;
+ }
+ if (!stream->active) {
+ /* Stream has stopped, so do not perform AUD_write. */
+ return_tx_buffer(stream, buffer);
+ continue;
+ }
+ if (!buffer->populated) {
+ iov_to_buf(buffer->elem->out_sg,
+ buffer->elem->out_num,
+ sizeof(virtio_snd_pcm_xfer),
+ buffer->data,
+ buffer->size);
+ buffer->populated = true;
+ }
+ for (;;) {
+ size = AUD_write(stream->voice.out,
+ buffer->data + buffer->offset,
+ MIN(buffer->size, available));
+ assert(size <= MIN(buffer->size, available));
+ if (size == 0) {
+ /* break out of both loops */
+ available = 0;
+ break;
+ }
+ buffer->size -= size;
+ buffer->offset += size;
+ available -= size;
+ if (buffer->size < 1) {
+ return_tx_buffer(stream, buffer);
+ break;
+ }
+ if (!available) {
+ break;
+ }
+ }
+ if (!available) {
+ break;
+ }
+ }
+ }
+}
+
+/*
+ * Flush all buffer data from this stream's queue into the driver's virtual
+ * queue.
+ *
+ * @stream: VirtIOSoundPCMStream *stream
+ */
+static inline void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream)
+{
+ VirtIOSoundPCMBuffer *buffer;
+
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ while (!QSIMPLEQ_EMPTY(&stream->queue)) {
+ buffer = QSIMPLEQ_FIRST(&stream->queue);
+ return_tx_buffer(stream, buffer);
+ }
+ }
+}
+
static void virtio_snd_unrealize(DeviceState *dev)
{
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
VirtIOSound *vsnd = VIRTIO_SND(dev);
VirtIOSoundPCMStream *stream;
qemu_del_vm_change_state_handler(vsnd->vmstate);
trace_virtio_snd_unrealize(vsnd);
if (vsnd->pcm) {
if (vsnd->pcm->streams) {
for (uint32_t i = 0; i < vsnd->snd_conf.streams; i++) {
stream = vsnd->pcm->streams[i];
if (stream) {
virtio_snd_process_cmdq(stream->s);
virtio_snd_pcm_close(stream);
+ qemu_mutex_destroy(&stream->queue_mutex);
g_free(stream);
}
}
g_free(vsnd->pcm->streams);
}
g_free(vsnd->pcm->pcm_params);
g_free(vsnd->pcm);
vsnd->pcm = NULL;
}
AUD_remove_card(&vsnd->card);
qemu_mutex_destroy(&vsnd->cmdq_mutex);
virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_CONTROL]);
virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_EVENT]);
virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_TX]);
virtio_delete_queue(vsnd->queues[VIRTIO_SND_VQ_RX]);
virtio_cleanup(vdev);
}
diff --git a/include/hw/virtio/virtio-snd.h b/include/hw/virtio/virtio-snd.h
index 4b4aaffff1..ee64f2a537 100644
--- a/include/hw/virtio/virtio-snd.h
+++ b/include/hw/virtio/virtio-snd.h
@@ -77,6 +77,50 @@ typedef struct virtio_snd_ctrl_command virtio_snd_ctrl_command;
typedef struct VirtIOSoundPCM VirtIOSoundPCM;
+typedef struct VirtIOSoundPCMBuffer VirtIOSoundPCMBuffer;
+
+/*
+ * The VirtIO sound spec reuses layouts and values from the High Definition
+ * Audio spec (virtio/v1.2: 5.14 Sound Device). This struct handles each I/O
+ * message's buffer (virtio/v1.2: 5.14.6.8 PCM I/O Messages).
+ *
+ * In the case of TX (i.e. playback) buffers, we defer reading the raw PCM data
+ * from the virtqueue until QEMU's sound backsystem calls the output callback.
+ * This is tracked by the `bool populated;` field, which is set to true when
+ * data has been read into our own buffer for consumption.
+ *
+ * VirtIOSoundPCMBuffer has a dynamic size since it includes the raw PCM data
+ * in its allocation. It must be initialized and destroyed as follows:
+ *
+ * size_t size = [[derived from owned VQ element descriptor sizes]];
+ * buffer = g_malloc0(sizeof(VirtIOSoundPCMBuffer) + size);
+ * buffer->elem = [[owned VQ element]];
+ *
+ * [..]
+ *
+ * g_free(buffer->elem);
+ * g_free(buffer);
+ */
+struct VirtIOSoundPCMBuffer {
+ QSIMPLEQ_ENTRY(VirtIOSoundPCMBuffer) entry;
+ VirtQueueElement *elem;
+ VirtQueue *vq;
+ size_t size;
+ /*
+ * In TX / Plaback, `offset` represents the first unused position inside
+ * `data`. If `offset == size` then there are no unused data left.
+ */
+ uint64_t offset;
+ /* Used for the TX queue for lazy I/O copy from `elem` */
+ bool populated;
+ /*
+ * VirtIOSoundPCMBuffer is an unsized type because it ends with an array of
+ * bytes. The size of `data` is determined from the I/O message's read-only
+ * or write-only size when allocating VirtIOSoundPCMBuffer.
+ */
+ uint8_t data[];
+};
+
struct VirtIOSoundPCM {
VirtIOSound *snd;
/*
@@ -93,74 +137,77 @@ struct VirtIOSoundPCM {
struct VirtIOSoundPCMStream {
VirtIOSoundPCM *pcm;
virtio_snd_pcm_info info;
virtio_snd_pcm_set_params params;
uint32_t id;
/* channel position values (VIRTIO_SND_CHMAP_XXX) */
uint8_t positions[VIRTIO_SND_CHMAP_MAX_SIZE];
VirtIOSound *s;
bool flushing;
audsettings as;
union {
SWVoiceIn *in;
SWVoiceOut *out;
} voice;
+ QemuMutex queue_mutex;
bool active;
+ QSIMPLEQ_HEAD(, VirtIOSoundPCMBuffer) queue;
+ QSIMPLEQ_HEAD(, VirtIOSoundPCMBuffer) invalid;
};
/*
* PCM stream state machine.
* -------------------------
*
* 5.14.6.6.1 PCM Command Lifecycle
* ================================
*
* A PCM stream has the following command lifecycle:
* - `SET PARAMETERS`
* The driver negotiates the stream parameters (format, transport, etc) with
* the device.
* Possible valid transitions: `SET PARAMETERS`, `PREPARE`.
* - `PREPARE`
* The device prepares the stream (allocates resources, etc).
* Possible valid transitions: `SET PARAMETERS`, `PREPARE`, `START`,
* `RELEASE`. Output only: the driver transfers data for pre-buffing.
* - `START`
* The device starts the stream (unmute, putting into running state, etc).
* Possible valid transitions: `STOP`.
* The driver transfers data to/from the stream.
* - `STOP`
* The device stops the stream (mute, putting into non-running state, etc).
* Possible valid transitions: `START`, `RELEASE`.
* - `RELEASE`
* The device releases the stream (frees resources, etc).
* Possible valid transitions: `SET PARAMETERS`, `PREPARE`.
*
* +---------------+ +---------+ +---------+ +-------+ +-------+
* | SetParameters | | Prepare | | Release | | Start | | Stop |
* +---------------+ +---------+ +---------+ +-------+ +-------+
* |- | | | |
* || | | | |
* |< | | | |
* |------------->| | | |
* |<-------------| | | |
* | |- | | |
* | || | | |
* | |< | | |
* | |--------------------->| |
* | |---------->| | |
* | | | |-------->|
* | | | |<--------|
* | | |<-------------------|
* |<-------------------------| | |
* | |<----------| | |
*
* CTRL in the VirtIOSound device
* ==============================
*
* The control messages that affect the state of a stream arrive in the
* `virtio_snd_handle_ctrl()` queue callback and are of type `struct
* virtio_snd_ctrl_command`. They are stored in a queue field in the device
* type, `VirtIOSound`. This allows deferring the CTRL request completion if
* it's not immediately possible due to locking/state reasons.
*
* The CTRL message is finally handled in `process_cmd()`.
*/
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 10/11] virtio-sound: implement audio capture (RX)
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (8 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 09/11] virtio-sound: implement audio output (TX) Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 11/11] docs/system: add basic virtio-snd documentation Manos Pitsidianakis
2023-10-18 8:49 ` [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
To perform audio capture we duplicate the TX logic of the previous
commit with the following difference: we receive data from the QEMU
audio backend and write it in the virt queue IO buffers the guest sends
to QEMU. When they are full (i.e. they have `period_bytes` amount of
data) or when recording stops in QEMU's audio backend, the buffer is
returned to the guest by notifying it.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
hw/virtio/trace-events | 3 +-
hw/virtio/virtio-snd.c | 262 +++++++++++++++++++++++++++++++++++------
2 files changed, 230 insertions(+), 35 deletions(-)
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
index a31531970d..56a2f44981 100644
--- a/hw/virtio/trace-events
+++ b/hw/virtio/trace-events
@@ -172,4 +172,5 @@ virtio_snd_handle_code(uint32_t val, const char *code) "ctrl code msg val = %"PR
virtio_snd_handle_chmap_info(void) "VIRTIO_SND_CHMAP_INFO called"
virtio_snd_handle_event(void) "event queue callback called"
virtio_snd_pcm_stream_flush(uint32_t stream) "flushing stream %"PRIu32
-virtio_snd_handle_xfer(void) "tx/rx queue callback called"
+virtio_snd_handle_tx_xfer(void) "tx queue callback called"
+virtio_snd_handle_rx_xfer(void) "rx queue callback called"
diff --git a/hw/virtio/virtio-snd.c b/hw/virtio/virtio-snd.c
index 5e9513fb26..636ea08c1a 100644
--- a/hw/virtio/virtio-snd.c
+++ b/hw/virtio/virtio-snd.c
@@ -1,40 +1,41 @@
/*
* VIRTIO Sound Device conforming to
*
* "Virtual I/O Device (VIRTIO) Version 1.2
* Committee Specification Draft 01
* 09 May 2022"
*
* <https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-52900014>
*
* Copyright (c) 2023 Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
* Copyright (C) 2019 OpenSynergy GmbH
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* (at your option) any later version. See the COPYING file in the
* top-level directory.
*/
#include "qemu/osdep.h"
#include "qemu/iov.h"
#include "qemu/log.h"
#include "qemu/error-report.h"
#include "include/qemu/lockable.h"
#include "sysemu/runstate.h"
#include "trace.h"
#include "qapi/error.h"
#include "hw/virtio/virtio-snd.h"
#include "hw/core/cpu.h"
#define VIRTIO_SOUND_VM_VERSION 1
#define VIRTIO_SOUND_JACK_DEFAULT 0
-#define VIRTIO_SOUND_STREAM_DEFAULT 1
+#define VIRTIO_SOUND_STREAM_DEFAULT 2
#define VIRTIO_SOUND_CHMAP_DEFAULT 0
#define VIRTIO_SOUND_HDA_FN_NID 0
static void virtio_snd_pcm_out_cb(void *data, int available);
static void virtio_snd_process_cmdq(VirtIOSound *s);
static void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream);
+static void virtio_snd_pcm_in_cb(void *data, int available);
static uint32_t supported_formats = BIT(VIRTIO_SND_PCM_FMT_S8)
| BIT(VIRTIO_SND_PCM_FMT_U8)
@@ -403,87 +404,96 @@ static void virtio_snd_get_qemu_audsettings(audsettings *as,
/*
* Close a stream and free all its resources.
*
* @stream: VirtIOSoundPCMStream *stream
*/
static void virtio_snd_pcm_close(VirtIOSoundPCMStream *stream)
{
if (stream) {
+ virtio_snd_pcm_flush(stream);
if (stream->info.direction == VIRTIO_SND_D_OUTPUT) {
- virtio_snd_pcm_flush(stream);
AUD_close_out(&stream->pcm->snd->card, stream->voice.out);
stream->voice.out = NULL;
+ } else if (stream->info.direction == VIRTIO_SND_D_INPUT) {
+ AUD_close_in(&stream->pcm->snd->card, stream->voice.in);
+ stream->voice.in = NULL;
}
}
}
/*
* Prepares a VirtIOSound card stream.
* Returns the response status code. (VIRTIO_SND_S_*).
*
* @s: VirtIOSound device
* @stream_id: stream id
*/
static uint32_t virtio_snd_pcm_prepare(VirtIOSound *s, uint32_t stream_id)
{
audsettings as;
virtio_snd_pcm_set_params *params;
VirtIOSoundPCMStream *stream;
if (s->pcm->streams == NULL ||
s->pcm->pcm_params == NULL ||
stream_id >= s->snd_conf.streams) {
return cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
params = virtio_snd_pcm_get_params(s, stream_id);
if (params == NULL) {
return cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
}
stream = virtio_snd_pcm_get_stream(s, stream_id);
if (stream == NULL) {
stream = g_new0(VirtIOSoundPCMStream, 1);
stream->active = false;
stream->id = stream_id;
stream->pcm = s->pcm;
stream->s = s;
qemu_mutex_init(&stream->queue_mutex);
QSIMPLEQ_INIT(&stream->queue);
QSIMPLEQ_INIT(&stream->invalid);
/*
* stream_id >= s->snd_conf.streams was checked before so this is
* in-bounds
*/
s->pcm->streams[stream_id] = stream;
}
virtio_snd_get_qemu_audsettings(&as, params);
stream->info.direction = stream_id < s->snd_conf.streams / 2 +
(s->snd_conf.streams & 1) ? VIRTIO_SND_D_OUTPUT : VIRTIO_SND_D_INPUT;
stream->info.hdr.hda_fn_nid = VIRTIO_SOUND_HDA_FN_NID;
stream->info.features = 0;
stream->info.channels_min = 1;
stream->info.channels_max = as.nchannels;
stream->info.formats = supported_formats;
stream->info.rates = supported_rates;
stream->params = *params;
stream->positions[0] = VIRTIO_SND_CHMAP_FL;
stream->positions[1] = VIRTIO_SND_CHMAP_FR;
stream->as = as;
if (stream->info.direction == VIRTIO_SND_D_OUTPUT) {
stream->voice.out = AUD_open_out(&s->card,
stream->voice.out,
"virtio-sound.out",
stream,
virtio_snd_pcm_out_cb,
&as);
AUD_set_volume_out(stream->voice.out, 0, 255, 255);
} else {
- qemu_log_mask(LOG_UNIMP, "virtio_snd: input/capture is unimplemented.");
+ stream->voice.in = AUD_open_in(&s->card,
+ stream->voice.in,
+ "virtio-sound.in",
+ stream,
+ virtio_snd_pcm_in_cb,
+ &as);
+ AUD_set_volume_in(stream->voice.in, 0, 255, 255);
}
return cpu_to_le32(VIRTIO_SND_S_OK);
}
@@ -536,54 +546,56 @@ static void virtio_snd_handle_pcm_prepare(VirtIOSound *s,
/*
* Handles VIRTIO_SND_R_PCM_START.
*
* @s: VirtIOSound device
* @cmd: The request command queue element from VirtIOSound cmdq field
* @start: whether to start or stop the device
*/
static void virtio_snd_handle_pcm_start_stop(VirtIOSound *s,
virtio_snd_ctrl_command *cmd,
bool start)
{
VirtIOSoundPCMStream *stream;
virtio_snd_pcm_hdr req;
uint32_t stream_id;
size_t msg_sz = iov_to_buf(cmd->elem->out_sg,
cmd->elem->out_num,
0,
&req,
sizeof(virtio_snd_pcm_hdr));
if (msg_sz != sizeof(virtio_snd_pcm_hdr)) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: virtio-snd command size incorrect %zu vs \
%zu\n", __func__, msg_sz, sizeof(virtio_snd_pcm_hdr));
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
return;
}
stream_id = le32_to_cpu(req.stream_id);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_OK);
trace_virtio_snd_handle_pcm_start_stop(start ? "VIRTIO_SND_R_PCM_START" :
"VIRTIO_SND_R_PCM_STOP", stream_id);
stream = virtio_snd_pcm_get_stream(s, stream_id);
if (stream) {
WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
stream->active = start;
}
if (stream->info.direction == VIRTIO_SND_D_OUTPUT) {
AUD_set_active_out(stream->voice.out, start);
+ } else {
+ AUD_set_active_in(stream->voice.in, start);
}
} else {
error_report("Invalid stream id: %"PRIu32, stream_id);
cmd->resp.code = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
return;
}
stream->active = start;
}
/*
* Returns the number of I/O messages that are being processed.
*
* @stream: VirtIOSoundPCMStream
*/
@@ -804,80 +816,122 @@ static void virtio_snd_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
/*
* The event virtqueue handler.
* Not implemented yet.
*
* @vdev: VirtIOSound device
* @vq: event vq
*/
static void virtio_snd_handle_event(VirtIODevice *vdev, VirtQueue *vq)
{
qemu_log_mask(LOG_UNIMP, "virtio_snd: event queue is unimplemented.\n");
trace_virtio_snd_handle_event();
}
+static inline void empty_invalid_queue(VirtIODevice *vdev, VirtQueue *vq)
+{
+ VirtIOSoundPCMBuffer *buffer = NULL;
+ VirtIOSoundPCMStream *stream = NULL;
+ virtio_snd_pcm_status resp = { 0 };
+ VirtIOSound *vsnd = VIRTIO_SND(vdev);
+ bool any = false;
+
+ for (uint32_t i = 0; i < vsnd->snd_conf.streams; i++) {
+ stream = vsnd->pcm->streams[i];
+ if (stream) {
+ any = false;
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ while (!QSIMPLEQ_EMPTY(&stream->invalid)) {
+ buffer = QSIMPLEQ_FIRST(&stream->invalid);
+ if (buffer->vq != vq) {
+ break;
+ }
+ any = true;
+ resp.status = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
+ iov_from_buf(buffer->elem->in_sg,
+ buffer->elem->in_num,
+ 0,
+ &resp,
+ sizeof(virtio_snd_pcm_status));
+ virtqueue_push(vq,
+ buffer->elem,
+ sizeof(virtio_snd_pcm_status));
+ QSIMPLEQ_REMOVE_HEAD(&stream->invalid, entry);
+ virtio_snd_pcm_buffer_free(buffer);
+ }
+ if (any) {
+ /*
+ * Notify vq about virtio_snd_pcm_status responses.
+ * Buffer responses must be notified separately later.
+ */
+ virtio_notify(vdev, vq);
+ }
+ }
+ }
+ }
+}
+
/*
* The tx virtqueue handler. Makes the buffers available to their respective
* streams for consumption.
*
* @vdev: VirtIOSound device
* @vq: tx virtqueue
*/
-static void virtio_snd_handle_tx(VirtIODevice *vdev, VirtQueue *vq)
+static void virtio_snd_handle_tx_xfer(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOSound *s = VIRTIO_SND(vdev);
VirtIOSoundPCMStream *stream = NULL;
VirtIOSoundPCMBuffer *buffer;
VirtQueueElement *elem;
size_t msg_sz, size;
virtio_snd_pcm_xfer hdr;
- virtio_snd_pcm_status resp = { 0 };
uint32_t stream_id;
/*
* If any of the I/O messages are invalid, put them in stream->invalid and
* return them after the for loop.
*/
bool must_empty_invalid_queue = false;
if (!virtio_queue_ready(vq)) {
return;
}
- trace_virtio_snd_handle_xfer();
+ trace_virtio_snd_handle_tx_xfer();
for (;;) {
elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
if (!elem) {
break;
}
/* get the message hdr object */
msg_sz = iov_to_buf(elem->out_sg,
elem->out_num,
0,
&hdr,
sizeof(virtio_snd_pcm_xfer));
if (msg_sz != sizeof(virtio_snd_pcm_xfer)) {
goto tx_err;
}
stream_id = le32_to_cpu(hdr.stream_id);
if (stream_id >= s->snd_conf.streams
|| s->pcm->streams[stream_id] == NULL) {
goto tx_err;
}
stream = s->pcm->streams[stream_id];
if (stream->info.direction != VIRTIO_SND_D_OUTPUT) {
goto tx_err;
}
WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
size = iov_size(elem->out_sg, elem->out_num) - msg_sz;
buffer = g_malloc0(sizeof(VirtIOSoundPCMBuffer) + size);
buffer->elem = elem;
buffer->populated = false;
buffer->vq = vq;
buffer->size = size;
buffer->offset = 0;
QSIMPLEQ_INSERT_TAIL(&stream->queue, buffer, entry);
}
continue;
@@ -885,44 +939,96 @@ static void virtio_snd_handle_tx(VirtIODevice *vdev, VirtQueue *vq)
tx_err:
WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
must_empty_invalid_queue = true;
buffer = g_malloc0(sizeof(VirtIOSoundPCMBuffer));
buffer->elem = elem;
buffer->vq = vq;
QSIMPLEQ_INSERT_TAIL(&stream->invalid, buffer, entry);
}
}
if (must_empty_invalid_queue) {
- WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
- while (!QSIMPLEQ_EMPTY(&stream->invalid)) {
- buffer = QSIMPLEQ_FIRST(&stream->invalid);
-
- resp.status = cpu_to_le32(VIRTIO_SND_S_BAD_MSG);
- iov_from_buf(buffer->elem->in_sg,
- buffer->elem->in_num,
- 0,
- &resp,
- sizeof(virtio_snd_pcm_status));
- virtqueue_push(vq, buffer->elem, sizeof(virtio_snd_pcm_status));
- QSIMPLEQ_REMOVE_HEAD(&stream->invalid, entry);
- virtio_snd_pcm_buffer_free(buffer);
- }
- /*
- * Notify vq about virtio_snd_pcm_status responses.
- * Buffer responses must be notified separately later.
- */
- virtio_notify(vdev, vq);
- }
+ empty_invalid_queue(vdev, vq);
}
}
/*
- * Stub buffer virtqueue handler.
+ * The rx virtqueue handler. Makes the buffers available to their respective
+ * streams for consumption.
*
* @vdev: VirtIOSound device
- * @vq: virtqueue
+ * @vq: rx virtqueue
*/
-static void virtio_snd_handle_xfer(VirtIODevice *vdev, VirtQueue *vq) {}
+static void virtio_snd_handle_rx_xfer(VirtIODevice *vdev, VirtQueue *vq)
+{
+ VirtIOSound *s = VIRTIO_SND(vdev);
+ VirtIOSoundPCMStream *stream = NULL;
+ VirtIOSoundPCMBuffer *buffer;
+ VirtQueueElement *elem;
+ size_t msg_sz, size;
+ virtio_snd_pcm_xfer hdr;
+ uint32_t stream_id;
+ /*
+ * if any of the I/O messages are invalid, put them in stream->invalid and
+ * return them after the for loop.
+ */
+ bool must_empty_invalid_queue = false;
+
+ if (!virtio_queue_ready(vq)) {
+ return;
+ }
+ trace_virtio_snd_handle_rx_xfer();
+
+ for (;;) {
+ elem = virtqueue_pop(vq, sizeof(VirtQueueElement));
+ if (!elem) {
+ break;
+ }
+ /* get the message hdr object */
+ msg_sz = iov_to_buf(elem->out_sg,
+ elem->out_num,
+ 0,
+ &hdr,
+ sizeof(virtio_snd_pcm_xfer));
+ if (msg_sz != sizeof(virtio_snd_pcm_xfer)) {
+ goto rx_err;
+ }
+ stream_id = le32_to_cpu(hdr.stream_id);
+
+ if (stream_id >= s->snd_conf.streams
+ || !s->pcm->streams[stream_id]) {
+ goto rx_err;
+ }
+
+ stream = s->pcm->streams[stream_id];
+ if (stream == NULL || stream->info.direction != VIRTIO_SND_D_INPUT) {
+ goto rx_err;
+ }
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ size = iov_size(elem->in_sg, elem->in_num) -
+ sizeof(virtio_snd_pcm_status);
+ buffer = g_malloc0(sizeof(VirtIOSoundPCMBuffer) + size);
+ buffer->elem = elem;
+ buffer->vq = vq;
+ buffer->size = 0;
+ buffer->offset = 0;
+ QSIMPLEQ_INSERT_TAIL(&stream->queue, buffer, entry);
+ }
+ continue;
+
+rx_err:
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ must_empty_invalid_queue = true;
+ buffer = g_malloc0(sizeof(VirtIOSoundPCMBuffer));
+ buffer->elem = elem;
+ buffer->vq = vq;
+ QSIMPLEQ_INSERT_TAIL(&stream->invalid, buffer, entry);
+ }
+ }
+
+ if (must_empty_invalid_queue) {
+ empty_invalid_queue(vdev, vq);
+ }
+}
static uint64_t get_features(VirtIODevice *vdev, uint64_t features,
Error **errp)
@@ -954,82 +1060,82 @@ virtio_snd_vm_state_change(void *opaque, bool running,
static void virtio_snd_realize(DeviceState *dev, Error **errp)
{
ERRP_GUARD();
VirtIOSound *vsnd = VIRTIO_SND(dev);
VirtIODevice *vdev = VIRTIO_DEVICE(dev);
virtio_snd_pcm_set_params default_params = { 0 };
uint32_t status;
vsnd->pcm = NULL;
vsnd->vmstate =
qemu_add_vm_change_state_handler(virtio_snd_vm_state_change, vsnd);
trace_virtio_snd_realize(vsnd);
vsnd->pcm = g_new0(VirtIOSoundPCM, 1);
vsnd->pcm->snd = vsnd;
vsnd->pcm->streams =
g_new0(VirtIOSoundPCMStream *, vsnd->snd_conf.streams);
vsnd->pcm->pcm_params =
g_new0(virtio_snd_pcm_set_params, vsnd->snd_conf.streams);
virtio_init(vdev, VIRTIO_ID_SOUND, sizeof(virtio_snd_config));
virtio_add_feature(&vsnd->features, VIRTIO_F_VERSION_1);
/* set number of jacks and streams */
if (vsnd->snd_conf.jacks > 8) {
error_setg(errp,
"Invalid number of jacks: %"PRIu32,
vsnd->snd_conf.jacks);
return;
}
if (vsnd->snd_conf.streams < 1 || vsnd->snd_conf.streams > 10) {
error_setg(errp,
"Invalid number of streams: %"PRIu32,
vsnd->snd_conf.streams);
return;
}
if (vsnd->snd_conf.chmaps > VIRTIO_SND_CHMAP_MAX_SIZE) {
error_setg(errp,
"Invalid number of channel maps: %"PRIu32,
vsnd->snd_conf.chmaps);
return;
}
AUD_register_card("virtio-sound", &vsnd->card, errp);
/* set default params for all streams */
default_params.features = 0;
default_params.buffer_bytes = cpu_to_le32(8192);
default_params.period_bytes = cpu_to_le32(2048);
default_params.channels = 2;
default_params.format = VIRTIO_SND_PCM_FMT_S16;
default_params.rate = VIRTIO_SND_PCM_RATE_48000;
vsnd->queues[VIRTIO_SND_VQ_CONTROL] =
virtio_add_queue(vdev, 64, virtio_snd_handle_ctrl);
vsnd->queues[VIRTIO_SND_VQ_EVENT] =
virtio_add_queue(vdev, 64, virtio_snd_handle_event);
vsnd->queues[VIRTIO_SND_VQ_TX] =
- virtio_add_queue(vdev, 64, virtio_snd_handle_tx);
+ virtio_add_queue(vdev, 64, virtio_snd_handle_tx_xfer);
vsnd->queues[VIRTIO_SND_VQ_RX] =
- virtio_add_queue(vdev, 64, virtio_snd_handle_xfer);
+ virtio_add_queue(vdev, 64, virtio_snd_handle_rx_xfer);
qemu_mutex_init(&vsnd->cmdq_mutex);
QTAILQ_INIT(&vsnd->cmdq);
for (uint32_t i = 0; i < vsnd->snd_conf.streams; i++) {
status = virtio_snd_set_pcm_params(vsnd, i, &default_params);
if (status != cpu_to_le32(VIRTIO_SND_S_OK)) {
error_setg(errp,
"Can't initalize stream params, device responded with %s.",
print_code(status));
return;
}
status = virtio_snd_pcm_prepare(vsnd, i);
if (status != cpu_to_le32(VIRTIO_SND_S_OK)) {
error_setg(errp,
"Can't prepare streams, device responded with %s.",
print_code(status));
return;
}
}
}
@@ -1059,76 +1165,164 @@ static inline void return_tx_buffer(VirtIOSoundPCMStream *stream,
/*
* AUD_* output callback.
*
* @data: VirtIOSoundPCMStream stream
* @available: number of bytes that can be written with AUD_write()
*/
static void virtio_snd_pcm_out_cb(void *data, int available)
{
VirtIOSoundPCMStream *stream = data;
VirtIOSoundPCMBuffer *buffer;
size_t size;
WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
while (!QSIMPLEQ_EMPTY(&stream->queue)) {
buffer = QSIMPLEQ_FIRST(&stream->queue);
if (!virtio_queue_ready(buffer->vq)) {
return;
}
if (!stream->active) {
/* Stream has stopped, so do not perform AUD_write. */
return_tx_buffer(stream, buffer);
continue;
}
if (!buffer->populated) {
iov_to_buf(buffer->elem->out_sg,
buffer->elem->out_num,
sizeof(virtio_snd_pcm_xfer),
buffer->data,
buffer->size);
buffer->populated = true;
}
for (;;) {
size = AUD_write(stream->voice.out,
buffer->data + buffer->offset,
MIN(buffer->size, available));
assert(size <= MIN(buffer->size, available));
if (size == 0) {
/* break out of both loops */
available = 0;
break;
}
buffer->size -= size;
buffer->offset += size;
available -= size;
if (buffer->size < 1) {
return_tx_buffer(stream, buffer);
break;
}
if (!available) {
break;
}
}
if (!available) {
break;
}
}
}
}
/*
- * Flush all buffer data from this stream's queue into the driver's virtual
- * queue.
+ * Flush all buffer data from this input stream's queue into the driver's
+ * virtual queue.
+ *
+ * @stream: VirtIOSoundPCMStream *stream
+ */
+static inline void return_rx_buffer(VirtIOSoundPCMStream *stream,
+ VirtIOSoundPCMBuffer *buffer)
+{
+ virtio_snd_pcm_status resp = { 0 };
+ resp.status = cpu_to_le32(VIRTIO_SND_S_OK);
+ resp.latency_bytes = 0;
+ /* Copy data -if any- to guest */
+ iov_from_buf(buffer->elem->in_sg,
+ buffer->elem->in_num,
+ 0,
+ buffer->data,
+ buffer->size);
+ iov_from_buf(buffer->elem->in_sg,
+ buffer->elem->in_num,
+ buffer->size,
+ &resp,
+ sizeof(virtio_snd_pcm_status));
+ virtqueue_push(buffer->vq,
+ buffer->elem,
+ sizeof(virtio_snd_pcm_status) + buffer->size);
+ virtio_notify(VIRTIO_DEVICE(stream->s), buffer->vq);
+ QSIMPLEQ_REMOVE(&stream->queue,
+ buffer,
+ VirtIOSoundPCMBuffer,
+ entry);
+ virtio_snd_pcm_buffer_free(buffer);
+}
+
+
+/*
+ * AUD_* input callback.
+ *
+ * @data: VirtIOSoundPCMStream stream
+ * @available: number of bytes that can be read with AUD_read()
+ */
+static void virtio_snd_pcm_in_cb(void *data, int available)
+{
+ VirtIOSoundPCMStream *stream = data;
+ VirtIOSoundPCMBuffer *buffer;
+ size_t size;
+
+ WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
+ while (!QSIMPLEQ_EMPTY(&stream->queue)) {
+ buffer = QSIMPLEQ_FIRST(&stream->queue);
+ if (!virtio_queue_ready(buffer->vq)) {
+ return;
+ }
+ if (!stream->active) {
+ /* Stream has stopped, so do not perform AUD_read. */
+ return_rx_buffer(stream, buffer);
+ continue;
+ }
+
+ for (;;) {
+ size = AUD_read(stream->voice.in,
+ buffer->data + buffer->size,
+ MIN(available, (stream->params.period_bytes -
+ buffer->size)));
+ if (!size) {
+ available = 0;
+ break;
+ }
+ buffer->size += size;
+ available -= size;
+ if (buffer->size >= stream->params.period_bytes) {
+ return_rx_buffer(stream, buffer);
+ break;
+ }
+ if (!available) {
+ break;
+ }
+ }
+ if (!available) {
+ break;
+ }
+ }
+ }
+}
+
+/*
+ * Flush all buffer data from this output stream's queue into the driver's
+ * virtual queue.
*
* @stream: VirtIOSoundPCMStream *stream
*/
static inline void virtio_snd_pcm_flush(VirtIOSoundPCMStream *stream)
{
VirtIOSoundPCMBuffer *buffer;
+ void (*cb)(VirtIOSoundPCMStream *, VirtIOSoundPCMBuffer *) =
+ (stream->info.direction == VIRTIO_SND_D_OUTPUT) ? return_tx_buffer :
+ return_rx_buffer;
WITH_QEMU_LOCK_GUARD(&stream->queue_mutex) {
while (!QSIMPLEQ_EMPTY(&stream->queue)) {
buffer = QSIMPLEQ_FIRST(&stream->queue);
- return_tx_buffer(stream, buffer);
+ cb(stream, buffer);
}
}
}
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 11/11] docs/system: add basic virtio-snd documentation
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (9 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 10/11] virtio-sound: implement audio capture (RX) Manos Pitsidianakis
@ 2023-10-11 14:34 ` Manos Pitsidianakis
2023-10-18 8:49 ` [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
11 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-11 14:34 UTC (permalink / raw)
To: qemu-devel
Cc: Emmanouil Pitsidianakis, Igor Skalkin, Anton Yakovlev,
Paolo Bonzini, Gerd Hoffmann, Michael S. Tsirkin,
Marcel Apfelbaum, Daniel P. Berrangé, Eduardo Habkost,
Marc-André Lureau, Volker Rümelin,
Kővágó, Zoltán, Alex Bennée,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
From: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
This commit adds basic documentation for using virtio-snd.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
---
MAINTAINERS | 1 +
docs/system/device-emulation.rst | 1 +
docs/system/devices/virtio-snd.rst (new) | 49 ++++++++++++++++++++++++
3 files changed, 51 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 701f12026a..a32e512a61 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2259,6 +2259,7 @@ M: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
S: Supported
F: hw/virtio/virtio-snd*.c
F: include/hw/virtio/virtio-snd.h
+F: docs/system/devices/virtio-snd.rst
nvme
M: Keith Busch <kbusch@kernel.org>
diff --git a/docs/system/device-emulation.rst b/docs/system/device-emulation.rst
index 4491c4cbf7..dae19446e5 100644
--- a/docs/system/device-emulation.rst
+++ b/docs/system/device-emulation.rst
@@ -79,20 +79,21 @@ in a PCI slot to the exclusive use of the guest.
Emulated Devices
~~~~~~~~~~~~~~~~
.. toctree::
:maxdepth: 1
devices/can.rst
devices/ccid.rst
devices/cxl.rst
devices/ivshmem.rst
devices/keyboard.rst
devices/net.rst
devices/nvme.rst
devices/usb.rst
devices/vhost-user.rst
devices/virtio-pmem.rst
+ devices/virtio-snd.rst
devices/vhost-user-rng.rst
devices/canokey.rst
devices/usb-u2f.rst
devices/igb.rst
diff --git a/docs/system/devices/virtio-snd.rst b/docs/system/devices/virtio-snd.rst
new file mode 100644
index 0000000000..2a9187fd70
--- /dev/null
+++ b/docs/system/devices/virtio-snd.rst
@@ -0,0 +1,49 @@
+virtio sound
+============
+
+This document explains the setup and usage of the Virtio sound device.
+The Virtio sound device is a paravirtualized sound card device.
+
+Linux kernel support
+--------------------
+
+Virtio sound requires a guest Linux kernel built with the
+``CONFIG_SND_VIRTIO`` option.
+
+Description
+-----------
+
+Virtio sound implements capture and playback from inside a guest using the
+configured audio backend of the host machine.
+
+Device properties
+-----------------
+
+The Virtio sound device can be configured with the following properties:
+
+ * ``jacks`` number of physical jacks (Unimplemented).
+ * ``streams`` number of PCM streams. At the moment, no stream configuration is supported: the first one will always be a playback stream, an optional second will always be a capture stream. Adding more will cycle stream directions from playback to capture.
+ * ``chmaps`` number of channel maps (Unimplemented).
+
+All streams are stereo and have the default channel positions ``Front left, right``.
+
+Examples
+--------
+
+Add an audio device and an audio backend at once with ``-audio`` and ``model=virtio``:
+
+ * pulseaudio: ``-audio driver=pa,model=virtio``
+ or ``-audio driver=pa,model=virtio,server=/run/user/1000/pulse/native``
+ * sdl: ``-audio driver=sdl,model=virtio``
+ * coreaudio: ``-audio driver=coreaudio,model=virtio``
+
+etc.
+
+To specifically add virtualized sound devices, you have to specify a PCI device
+and an audio backend listed with ``-audio driver=help`` that works on your host
+machine, e.g.:
+
+::
+
+ -device virtio-sound-pci,audiodev=my_audiodev \
+ -audiodev alsa,id=my_audiodev
--
2.39.2
^ permalink raw reply related [flat|nested] 17+ messages in thread
* Re: [PATCH v11 00/11] Add VIRTIO sound card
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
` (10 preceding siblings ...)
2023-10-11 14:34 ` [PATCH v11 11/11] docs/system: add basic virtio-snd documentation Manos Pitsidianakis
@ 2023-10-18 8:49 ` Manos Pitsidianakis
2023-10-18 9:08 ` Michael S. Tsirkin
11 siblings, 1 reply; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-18 8:49 UTC (permalink / raw)
To: Gerd Hoffmann
Cc: Igor Skalkin, Anton Yakovlev, Paolo Bonzini, qemu-devel,
Michael S. Tsirkin, Marcel Apfelbaum, Daniel P. Berrangé ,
Eduardo Habkost, Marc-André Lureau, Volker Rü melin,
Kő vá gó , Zoltá n, Alex Benné e,
Philippe Mathieu-Daudé , Mark Cave-Ayland,
Stefano Garzarella
On Wed, 11 Oct 2023 17:34, Manos Pitsidianakis <manos.pitsidianakis@linaro.org> wrote:
>This patch series adds an audio device implementing the recent virtio
>sound spec (1.2) and a corresponding PCI wrapper device.
>
>v11 can be found online at:
>
>https://gitlab.com/epilys/qemu/-/tree/virtio-snd-v11
>
>Ref 885b01fe272541fdab5583780d4c3a59bfd8e734
Hello Gerd, MAINTAINERS says you own the hw/audio subsystem, would you
pull this in your tree if/when it is to be merged?
For context, the device was in hw/audio initially but in early list
discussions we decided to move it with the rest of virtio devices.
At its current state it LGTM, if there's agreement that there are no
issues we can merge this series.
All the best,
--
Manos
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v11 00/11] Add VIRTIO sound card
2023-10-18 8:49 ` [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
@ 2023-10-18 9:08 ` Michael S. Tsirkin
2023-10-18 13:44 ` Manos Pitsidianakis
0 siblings, 1 reply; 17+ messages in thread
From: Michael S. Tsirkin @ 2023-10-18 9:08 UTC (permalink / raw)
To: Manos Pitsidianakis
Cc: Gerd Hoffmann, Igor Skalkin, Anton Yakovlev, Paolo Bonzini,
qemu-devel, Marcel Apfelbaum, Daniel P. Berrangé,
Eduardo Habkost, Marc-André Lureau, Volker Rü melin,
Kő vá gó , Zoltá n, Alex Benné e,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
On Wed, Oct 18, 2023 at 11:49:00AM +0300, Manos Pitsidianakis wrote:
> On Wed, 11 Oct 2023 17:34, Manos Pitsidianakis <manos.pitsidianakis@linaro.org> wrote:
> > This patch series adds an audio device implementing the recent virtio
> > sound spec (1.2) and a corresponding PCI wrapper device.
> >
> > v11 can be found online at:
> >
> > https://gitlab.com/epilys/qemu/-/tree/virtio-snd-v11
> >
> > Ref 885b01fe272541fdab5583780d4c3a59bfd8e734
> >
> Hello Gerd, MAINTAINERS says you own the hw/audio subsystem, would you pull
> this in your tree if/when it is to be merged?
>
> For context, the device was in hw/audio initially but in early list
> discussions we decided to move it with the rest of virtio devices.
Link to these discussions? virtio-gpu is under ./hw/display
seems inconsistent. And you are asking Gerd to merge but
your MAINTAINERS patch wouldn't even let people know
he needs to be Cc'd on changes.
> At its current state it LGTM, if there's agreement that there are no issues
> we can merge this series.
>
> All the best,
>
> --
> Manos
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v11 00/11] Add VIRTIO sound card
2023-10-18 9:08 ` Michael S. Tsirkin
@ 2023-10-18 13:44 ` Manos Pitsidianakis
2023-10-18 14:50 ` Michael S. Tsirkin
0 siblings, 1 reply; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-18 13:44 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Gerd Hoffmann, Igor Skalkin, Anton Yakovlev, Paolo Bonzini,
qemu-devel, Marcel Apfelbaum, Daniel P. Berrangé ,
Eduardo Habkost, Marc-André Lureau, Volker Rü melin,
Kő vá gó , Zoltá n, Alex Benné e,
Philippe Mathieu-Daudé , Mark Cave-Ayland,
Stefano Garzarella
Hello Michael,
Thank you for your reply;
On Wed, 18 Oct 2023 12:08, "Michael S. Tsirkin" <mst@redhat.com> wrote:
>On Wed, Oct 18, 2023 at 11:49:00AM +0300, Manos Pitsidianakis wrote:
>> On Wed, 11 Oct 2023 17:34, Manos Pitsidianakis <manos.pitsidianakis@linaro.org> wrote:
>> > This patch series adds an audio device implementing the recent virtio
>> > sound spec (1.2) and a corresponding PCI wrapper device.
>> >
>> > v11 can be found online at:
>> >
>> > https://gitlab.com/epilys/qemu/-/tree/virtio-snd-v11
>> >
>> > Ref 885b01fe272541fdab5583780d4c3a59bfd8e734
>> >
>> Hello Gerd, MAINTAINERS says you own the hw/audio subsystem, would you pull
>> this in your tree if/when it is to be merged?
>>
>> For context, the device was in hw/audio initially but in early list
>> discussions we decided to move it with the rest of virtio devices.
>
>Link to these discussions? virtio-gpu is under ./hw/display
>seems inconsistent.
I agree that it is inconsistent, but I do not know if there is a general
consensus on this. I am fine with placing it anywhere that is deemed
appropriate.
<87a5xkde0c.fsf@linaro.org>
https://lore.kernel.org/qemu-devel/87a5xkde0c.fsf@linaro.org/
>And you are asking Gerd to merge but
>your MAINTAINERS patch wouldn't even let people know
>he needs to be Cc'd on changes.
No, I didn't ask to merge this, I asked if Gerd would be the one merging
it because I am not sure myself and wanted more information. What do you
think should be the correct process?
--
Manos
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v11 00/11] Add VIRTIO sound card
2023-10-18 13:44 ` Manos Pitsidianakis
@ 2023-10-18 14:50 ` Michael S. Tsirkin
2023-10-18 16:07 ` Manos Pitsidianakis
0 siblings, 1 reply; 17+ messages in thread
From: Michael S. Tsirkin @ 2023-10-18 14:50 UTC (permalink / raw)
To: Manos Pitsidianakis
Cc: Gerd Hoffmann, Igor Skalkin, Anton Yakovlev, Paolo Bonzini,
qemu-devel, Marcel Apfelbaum, Daniel P. Berrangé,
Eduardo Habkost, Marc-André Lureau, Volker Rü melin,
Kő vá gó , Zoltá n, Alex Benné e,
Philippe Mathieu-Daudé, Mark Cave-Ayland, Stefano Garzarella
On Wed, Oct 18, 2023 at 04:44:00PM +0300, Manos Pitsidianakis wrote:
> Hello Michael,
>
> Thank you for your reply;
>
> On Wed, 18 Oct 2023 12:08, "Michael S. Tsirkin" <mst@redhat.com> wrote:
> > On Wed, Oct 18, 2023 at 11:49:00AM +0300, Manos Pitsidianakis wrote:
> > > On Wed, 11 Oct 2023 17:34, Manos Pitsidianakis <manos.pitsidianakis@linaro.org> wrote:
> > > > This patch series adds an audio device implementing the recent virtio
> > > > sound spec (1.2) and a corresponding PCI wrapper device.
> > > > > v11 can be found online at:
> > > > > https://gitlab.com/epilys/qemu/-/tree/virtio-snd-v11
> > > > > Ref 885b01fe272541fdab5583780d4c3a59bfd8e734
> > > > Hello Gerd, MAINTAINERS says you own the hw/audio subsystem, would
> > > you pull
> > > this in your tree if/when it is to be merged?
> > >
> > > For context, the device was in hw/audio initially but in early list
> > > discussions we decided to move it with the rest of virtio devices.
> >
> > Link to these discussions? virtio-gpu is under ./hw/display
> > seems inconsistent.
>
> I agree that it is inconsistent, but I do not know if there is a general
> consensus on this. I am fine with placing it anywhere that is deemed
> appropriate.
>
> <87a5xkde0c.fsf@linaro.org>
> https://lore.kernel.org/qemu-devel/87a5xkde0c.fsf@linaro.org/
>
> > And you are asking Gerd to merge but
> > your MAINTAINERS patch wouldn't even let people know
> > he needs to be Cc'd on changes.
>
> No, I didn't ask to merge this, I asked if Gerd would be the one merging it
> because I am not sure myself and wanted more information. What do you think
> should be the correct process?
>
> --
I'd put it under audio and then you get an unambigous maintainer
to go through.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v11 00/11] Add VIRTIO sound card
2023-10-18 14:50 ` Michael S. Tsirkin
@ 2023-10-18 16:07 ` Manos Pitsidianakis
0 siblings, 0 replies; 17+ messages in thread
From: Manos Pitsidianakis @ 2023-10-18 16:07 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Gerd Hoffmann, Igor Skalkin, Anton Yakovlev, Paolo Bonzini,
qemu-devel, Marcel Apfelbaum, Daniel P. Berrangé ,
Eduardo Habkost, Marc-André Lureau, Volker Rü melin,
Kő vá gó , Zoltá n, Alex Benné e,
Philippe Mathieu-Daudé , Mark Cave-Ayland,
Stefano Garzarella
On Wed, 18 Oct 2023 17:50, "Michael S. Tsirkin" <mst@redhat.com> wrote:
>> > > For context, the device was in hw/audio initially but in early
>> > > list
>> > > discussions we decided to move it with the rest of virtio devices.
>> >
>> > Link to these discussions? virtio-gpu is under ./hw/display
>> > seems inconsistent.
>>
>> I agree that it is inconsistent, but I do not know if there is a general
>> consensus on this. I am fine with placing it anywhere that is deemed
>> appropriate.
>>
>> <87a5xkde0c.fsf@linaro.org>
>> https://lore.kernel.org/qemu-devel/87a5xkde0c.fsf@linaro.org/
>>
>> > And you are asking Gerd to merge but
>> > your MAINTAINERS patch wouldn't even let people know
>> > he needs to be Cc'd on changes.
>>
>> No, I didn't ask to merge this, I asked if Gerd would be the one merging it
>> because I am not sure myself and wanted more information. What do you think
>> should be the correct process?
>
>I'd put it under audio and then you get an unambigous maintainer
>to go through.
Thank you! I will do just that.
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2023-10-18 16:11 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-10-11 14:34 [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 01/11] Add virtio-sound device stub Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 02/11] Add virtio-sound-pci device Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 03/11] virtio-sound: handle control messages and streams Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 04/11] virtio-sound: handle VIRTIO_SND_R_PCM_INFO request Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 05/11] virtio-sound: handle VIRTIO_SND_R_PCM_{START,STOP} Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 06/11] virtio-sound: handle VIRTIO_SND_R_PCM_SET_PARAMS Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 07/11] virtio-sound: handle VIRTIO_SND_R_PCM_PREPARE Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 08/11] virtio-sound: handle VIRTIO_SND_R_PCM_RELEASE Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 09/11] virtio-sound: implement audio output (TX) Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 10/11] virtio-sound: implement audio capture (RX) Manos Pitsidianakis
2023-10-11 14:34 ` [PATCH v11 11/11] docs/system: add basic virtio-snd documentation Manos Pitsidianakis
2023-10-18 8:49 ` [PATCH v11 00/11] Add VIRTIO sound card Manos Pitsidianakis
2023-10-18 9:08 ` Michael S. Tsirkin
2023-10-18 13:44 ` Manos Pitsidianakis
2023-10-18 14:50 ` Michael S. Tsirkin
2023-10-18 16:07 ` Manos Pitsidianakis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).