qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jagannathan Raman <jag.raman@oracle.com>
To: qemu-devel@nongnu.org
Cc: elena.ufimtseva@oracle.com, fam@euphon.net,
	swapnil.ingle@nutanix.com, john.g.johnson@oracle.com,
	kraxel@redhat.com, jag.raman@oracle.com, quintela@redhat.com,
	mst@redhat.com, armbru@redhat.com, kanth.ghatraju@oracle.com,
	felipe@nutanix.com, thuth@redhat.com, ehabkost@redhat.com,
	konrad.wilk@oracle.com, dgilbert@redhat.com,
	alex.williamson@redhat.com, stefanha@redhat.com,
	thanos.makatos@nutanix.com, rth@twiddle.net, kwolf@redhat.com,
	berrange@redhat.com, mreitz@redhat.com,
	ross.lagerwall@citrix.com, marcandre.lureau@gmail.com,
	pbonzini@redhat.com
Subject: [PATCH v11 12/19] multi-process: Forward PCI config space acceses to the remote process
Date: Thu, 15 Oct 2020 14:05:05 -0400	[thread overview]
Message-ID: <1a1490ba03686fe29a0f627bec1556a0051fed18.1602784930.git.jag.raman@oracle.com> (raw)
In-Reply-To: <cover.1602784930.git.jag.raman@oracle.com>
In-Reply-To: <cover.1602784930.git.jag.raman@oracle.com>

From: Elena Ufimtseva <elena.ufimtseva@oracle.com>

The Proxy Object sends the PCI config space accesses as messages
to the remote process over the communication channel

TODO:
Investigate if the local PCI config writes can be dropped.
Without the proxy local PCI config space writes for the device,
the driver in the guest times out on the probing.
We have tried to only refer to the remote for the PCI config writes,
but the driver timeout in the guest forced as to left this
as it is (removing local PCI config only).

Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/i386/remote-msg.c     | 62 ++++++++++++++++++++++++++++++++++++++++++++++++
 hw/pci/proxy.c           | 50 ++++++++++++++++++++++++++++++++++++++
 include/io/mpqemu-link.h |  9 +++++++
 io/mpqemu-link.c         |  6 +++++
 4 files changed, 127 insertions(+)

diff --git a/hw/i386/remote-msg.c b/hw/i386/remote-msg.c
index 6451b77..94937db 100644
--- a/hw/i386/remote-msg.c
+++ b/hw/i386/remote-msg.c
@@ -15,6 +15,12 @@
 #include "io/mpqemu-link.h"
 #include "qapi/error.h"
 #include "sysemu/runstate.h"
+#include "hw/pci/pci.h"
+
+static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
+                                 MPQemuMsg *msg);
+static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
+                                MPQemuMsg *msg);
 
 void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
 {
@@ -43,6 +49,12 @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
         }
 
         switch (msg.cmd) {
+        case PCI_CONFIG_WRITE:
+            process_config_write(com->ioc, pci_dev, &msg);
+            break;
+        case PCI_CONFIG_READ:
+            process_config_read(com->ioc, pci_dev, &msg);
+            break;
         default:
             error_setg(&local_err,
                        "Unknown command (%d) received for device %s (pid=%d)",
@@ -60,3 +72,53 @@ void coroutine_fn mpqemu_remote_msg_loop_co(void *data)
 
     return;
 }
+
+static void process_config_write(QIOChannel *ioc, PCIDevice *dev,
+                                 MPQemuMsg *msg)
+{
+    ConfDataMsg *conf = (ConfDataMsg *)&msg->data.conf_data;
+    MPQemuMsg ret = { 0 };
+    Error *local_err = NULL;
+
+    if ((conf->addr + sizeof(conf->val)) > pci_config_size(dev)) {
+        error_report("Bad address received when writing PCI config, pid %d",
+                     getpid());
+        ret.data.u64 = UINT64_MAX;
+    } else {
+        pci_default_write_config(dev, conf->addr, conf->val, conf->l);
+    }
+
+    ret.cmd = RET_MSG;
+    ret.size = sizeof(ret.data.u64);
+
+    mpqemu_msg_send(&ret, ioc, &local_err);
+    if (local_err) {
+        error_report("Could not send message to proxy from pid %d",
+                     getpid());
+    }
+}
+
+static void process_config_read(QIOChannel *ioc, PCIDevice *dev,
+                                MPQemuMsg *msg)
+{
+    ConfDataMsg *conf = (ConfDataMsg *)&msg->data.conf_data;
+    MPQemuMsg ret = { 0 };
+    Error *local_err = NULL;
+
+    if ((conf->addr + sizeof(conf->val)) > pci_config_size(dev)) {
+        error_report("Bad address received when reading PCI config, pid %d",
+                     getpid());
+        ret.data.u64 = UINT64_MAX;
+    } else {
+        ret.data.u64 = pci_default_read_config(dev, conf->addr, conf->l);
+    }
+
+    ret.cmd = RET_MSG;
+    ret.size = sizeof(ret.data.u64);
+
+    mpqemu_msg_send(&ret, ioc, &local_err);
+    if (local_err) {
+        error_report("Could not send message to proxy from pid %d",
+                     getpid());
+    }
+}
diff --git a/hw/pci/proxy.c b/hw/pci/proxy.c
index 7a12f23..27714fe 100644
--- a/hw/pci/proxy.c
+++ b/hw/pci/proxy.c
@@ -16,6 +16,8 @@
 #include "hw/qdev-properties.h"
 #include "monitor/monitor.h"
 #include "migration/blocker.h"
+#include "io/mpqemu-link.h"
+#include "qemu/error-report.h"
 
 static void proxy_set_socket(PCIProxyDev *pdev, int fd, Error **errp)
 {
@@ -69,6 +71,51 @@ static void pci_proxy_dev_exit(PCIDevice *pdev)
     error_free(dev->migration_blocker);
 }
 
+static int config_op_send(PCIProxyDev *pdev, uint32_t addr, uint32_t *val,
+                          int l, unsigned int op)
+{
+    MPQemuMsg msg = { 0 };
+    uint64_t ret = -EINVAL;
+    Error *local_err = NULL;
+
+    msg.cmd = op;
+    msg.data.conf_data.addr = addr;
+    msg.data.conf_data.val = (op == PCI_CONFIG_WRITE) ? *val : 0;
+    msg.data.conf_data.l = l;
+    msg.size = sizeof(ConfDataMsg);
+
+    ret = mpqemu_msg_send_and_await_reply(&msg, pdev, &local_err);
+    if (local_err) {
+        error_report_err(local_err);
+    }
+    if (op == PCI_CONFIG_READ) {
+        *val = (uint32_t)ret;
+    }
+
+    return ret;
+}
+
+static uint32_t pci_proxy_read_config(PCIDevice *d, uint32_t addr, int len)
+{
+    uint32_t val;
+
+    (void)config_op_send(PCI_PROXY_DEV(d), addr, &val, len, PCI_CONFIG_READ);
+
+    return val;
+}
+
+static void pci_proxy_write_config(PCIDevice *d, uint32_t addr, uint32_t val,
+                                   int l)
+{
+    /*
+     * Some of the functions access the copy of the remote device
+     * PCI config space, therefore maintain it updated.
+     */
+    pci_default_write_config(d, addr, val, l);
+
+    (void)config_op_send(PCI_PROXY_DEV(d), addr, &val, l, PCI_CONFIG_WRITE);
+}
+
 static void pci_proxy_dev_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
@@ -76,6 +123,9 @@ static void pci_proxy_dev_class_init(ObjectClass *klass, void *data)
 
     k->realize = pci_proxy_dev_realize;
     k->exit = pci_proxy_dev_exit;
+    k->config_read = pci_proxy_read_config;
+    k->config_write = pci_proxy_write_config;
+
     device_class_set_props(dc, proxy_properties);
 }
 
diff --git a/include/io/mpqemu-link.h b/include/io/mpqemu-link.h
index 4bea5da..459d345 100644
--- a/include/io/mpqemu-link.h
+++ b/include/io/mpqemu-link.h
@@ -34,6 +34,8 @@ typedef enum {
     MPQEMU_CMD_INIT,
     SYNC_SYSMEM,
     RET_MSG,
+    PCI_CONFIG_WRITE,
+    PCI_CONFIG_READ,
     MPQEMU_CMD_MAX,
 } MPQemuCmd;
 
@@ -43,6 +45,12 @@ typedef struct {
     off_t offsets[REMOTE_MAX_FDS];
 } SyncSysmemMsg;
 
+typedef struct {
+    uint32_t addr;
+    uint32_t val;
+    int l;
+} ConfDataMsg;
+
 /**
  * MPQemuMsg:
  * @cmd: The remote command
@@ -60,6 +68,7 @@ typedef struct {
 
     union {
         uint64_t u64;
+        ConfDataMsg conf_data;
         SyncSysmemMsg sync_sysmem;
     } data;
 
diff --git a/io/mpqemu-link.c b/io/mpqemu-link.c
index 1339cc7..5ef82da 100644
--- a/io/mpqemu-link.c
+++ b/io/mpqemu-link.c
@@ -278,6 +278,12 @@ bool mpqemu_msg_valid(MPQemuMsg *msg)
             return false;
         }
         break;
+    case PCI_CONFIG_WRITE:
+    case PCI_CONFIG_READ:
+        if (msg->size != sizeof(ConfDataMsg)) {
+            return false;
+        }
+        break;
     default:
         break;
     }
-- 
1.8.3.1



  parent reply	other threads:[~2020-10-15 18:13 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-15 18:04 [PATCH v11 00/19] Initial support for multi-process Qemu Jagannathan Raman
2020-10-15 18:04 ` [PATCH v11 01/19] memory: alloc RAM from file at offset Jagannathan Raman
2020-10-15 18:04 ` [PATCH v11 02/19] multi-process: Add config option for multi-process QEMU Jagannathan Raman
2020-10-23 16:49   ` Philippe Mathieu-Daudé
2020-10-15 18:04 ` [PATCH v11 03/19] multi-process: setup PCI host bridge for remote device Jagannathan Raman
2020-10-15 18:04 ` [PATCH v11 04/19] multi-process: setup a machine object for remote device process Jagannathan Raman
2020-10-23 16:33   ` Philippe Mathieu-Daudé
2020-10-15 18:04 ` [PATCH v11 05/19] multi-process: add qio channel function to transmit Jagannathan Raman
2020-10-23 16:36   ` Philippe Mathieu-Daudé
2020-12-04 14:39   ` Marc-André Lureau
2020-10-15 18:04 ` [PATCH v11 06/19] multi-process: define MPQemuMsg format and transmission functions Jagannathan Raman
2020-10-23 13:53   ` Stefan Hajnoczi
2020-10-15 18:05 ` [PATCH v11 07/19] multi-process: Initialize message handler in remote device Jagannathan Raman
2020-10-15 18:05 ` [PATCH v11 08/19] multi-process: Associate fd of a PCIDevice with its object Jagannathan Raman
2020-10-23 13:55   ` Stefan Hajnoczi
2020-10-15 18:05 ` [PATCH v11 09/19] multi-process: setup memory manager for remote device Jagannathan Raman
2020-10-15 18:05 ` [PATCH v11 10/19] multi-process: introduce proxy object Jagannathan Raman
2020-10-23 13:56   ` Stefan Hajnoczi
2020-10-15 18:05 ` [PATCH v11 11/19] multi-process: add proxy communication functions Jagannathan Raman
2020-10-15 18:05 ` Jagannathan Raman [this message]
2020-10-23 16:59   ` [PATCH v11 12/19] multi-process: Forward PCI config space acceses to the remote process Philippe Mathieu-Daudé
2020-10-23 17:20     ` Philippe Mathieu-Daudé
2020-10-15 18:05 ` [PATCH v11 13/19] multi-process: PCI BAR read/write handling for proxy & remote endpoints Jagannathan Raman
2020-10-15 18:05 ` [PATCH v11 14/19] multi-process: Synchronize remote memory Jagannathan Raman
2020-10-15 18:05 ` [PATCH v11 15/19] multi-process: create IOHUB object to handle irq Jagannathan Raman
2020-10-15 18:05 ` [PATCH v11 16/19] multi-process: Retrieve PCI info from remote process Jagannathan Raman
2020-10-15 18:05 ` [PATCH v11 17/19] multi-process: perform device reset in the " Jagannathan Raman
2020-10-15 18:05 ` [PATCH v11 18/19] multi-process: add the concept description to docs/devel/qemu-multiprocess Jagannathan Raman
2020-10-15 18:05 ` [PATCH v11 19/19] multi-process: add configure and usage information Jagannathan Raman
2020-11-04 18:39   ` Philippe Mathieu-Daudé
2020-10-23 13:57 ` [PATCH v11 00/19] Initial support for multi-process Qemu Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1a1490ba03686fe29a0f627bec1556a0051fed18.1602784930.git.jag.raman@oracle.com \
    --to=jag.raman@oracle.com \
    --cc=alex.williamson@redhat.com \
    --cc=armbru@redhat.com \
    --cc=berrange@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=ehabkost@redhat.com \
    --cc=elena.ufimtseva@oracle.com \
    --cc=fam@euphon.net \
    --cc=felipe@nutanix.com \
    --cc=john.g.johnson@oracle.com \
    --cc=kanth.ghatraju@oracle.com \
    --cc=konrad.wilk@oracle.com \
    --cc=kraxel@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=marcandre.lureau@gmail.com \
    --cc=mreitz@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=ross.lagerwall@citrix.com \
    --cc=rth@twiddle.net \
    --cc=stefanha@redhat.com \
    --cc=swapnil.ingle@nutanix.com \
    --cc=thanos.makatos@nutanix.com \
    --cc=thuth@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).