[Qemu-devel] ne2000 patches (now it works on win98)

[Qemu-devel] ne2000 patches (now it works on win98)

[Renzo Davoli]

[-- Attachment #1: Type: text/plain, Size: 2003 bytes --]

I have found some bugs in the ne2k emulation:

- the 32K packet buffer is at address 16k (i.e. in the range 16k-48k)
(actually it is in the range 0-32k)
- there was no control of out-of-range access to the packet buffer
(the ugly win packet driver tests the ne2k memory by writing a pattern
at different addresses, no control=segmentation fault!)
- ioport_write EN0_ISR: the highest order bit (reset flag) must keep untouched
it is reset by the start command.
- the win driver needs the EN0_RSARLO and EN0_RSARHI management in
the ioport_read routine
(this very ugly win98_se driver instead of keeping a variable with the current
address rereads the address from the interface, very smart ;-)

I have been able to start and run win98 with vde. After the switch from
the clouded sky to the light blue background it seems that the O.S.
waits for a timeout (maybe something related to the DHCP negotiation of
the address -- my DHCP server is remote into a tunnel).
But,.... it works. (Also with multiple interfaces, -- Win98 is able to
use just one at a time, though).

The file here attached is the patch for hw/ne2000.c source file.
I have created a 48K memory but in the reality only the first 32 bytes +
the range 16k-48k is used, with an extra "if" the interface memory 
can be compacted.

Fabrice, I'd have some requests for the code....
I would like irq and iomem as well as MAC address for net interfaces to
be reconfigurable. Now I cannot put two qemu  machines on the same
virtual net as they pretend to have the same MAC.
Two questions:
- it is better to add command line options or a configuration file would
  help? It seems to me that you like command line options instead of
  configuration files: the pro is that the options are not hidden, the
  cons is that for complex configuration the command line can grow to
  unmanageable limits
- do you like me to write the code? it is just a coordination issue, it
  is useless for both to write the same code.

ciao and "happy hacking".

	renzo

[-- Attachment #2: ne2000.c.diff --]
[-- Type: text/plain, Size: 4731 bytes --]

*** ne2000.orig.c	Sat Mar 27 10:24:32 2004
--- ne2000.c	Sat Mar 27 10:07:00 2004
***************
*** 123,129 ****
  #define ENTSR_CDH 0x40	/* The collision detect "heartbeat" signal was lost. */
  #define ENTSR_OWC 0x80  /* There was an out-of-window collision. */
  
! #define NE2000_MEM_SIZE 32768
  
  typedef struct NE2000State {
      uint8_t cmd;
--- 123,134 ----
  #define ENTSR_CDH 0x40	/* The collision detect "heartbeat" signal was lost. */
  #define ENTSR_OWC 0x80  /* There was an out-of-window collision. */
  
! //#define NE2000_MEM_SIZE 32768
! //#define NE2000_MEM_SIZE 65536
! #define NE2000_PMEM_SIZE    (32*1024)
! #define NE2000_PMEM_START   (16*1024)
! #define NE2000_PMEM_END     (NE2000_PMEM_SIZE+NE2000_PMEM_START)
! #define NE2000_MEM_SIZE     NE2000_PMEM_END
  
  typedef struct NE2000State {
      uint8_t cmd;
***************
*** 260,265 ****
--- 265,271 ----
          /* control register */
          s->cmd = val;
          if (val & E8390_START) {
+             s->isr &= ~ENISR_RESET;
              /* test specific case: zero length transfert */
              if ((val & (E8390_RREAD | E8390_RWRITE)) &&
                  s->rcnt == 0) {
***************
*** 316,322 ****
              s->dcfg = val;
              break;
          case EN0_ISR:
!             s->isr &= ~val;
              ne2000_update_irq(s);
              break;
          case EN1_PHYS ... EN1_PHYS + 5:
--- 322,328 ----
              s->dcfg = val;
              break;
          case EN0_ISR:
!             s->isr &= ~(val & 0x7f);
              ne2000_update_irq(s);
              break;
          case EN1_PHYS ... EN1_PHYS + 5:
***************
*** 353,358 ****
--- 359,370 ----
          case EN0_ISR:
              ret = s->isr;
              break;
+ 	case EN0_RSARLO:
+ 	    ret = s->rsar & 0x00ff;
+ 	    break;
+ 	case EN0_RSARHI:
+ 	    ret = s->rsar >> 8;
+ 	    break;
          case EN1_PHYS ... EN1_PHYS + 5:
              ret = s->phys[offset - EN1_PHYS];
              break;
***************
*** 363,368 ****
--- 375,381 ----
              ret = s->mult[offset - EN1_MULT];
              break;
          default:
+ 	    /* printf("not implemented\n"); RD*/
              ret = 0x00;
              break;
          }
***************
*** 379,398 ****
      uint8_t *p;
  
  #ifdef DEBUG_NE2000
!     printf("NE2000: asic write val=0x%04x\n", val);
  #endif
      p = s->mem + s->rsar;
!     if (s->dcfg & 0x01) {
!         /* 16 bit access */
!         p[0] = val;
!         p[1] = val >> 8;
!         s->rsar += 2;
!         s->rcnt -= 2;
      } else {
!         /* 8 bit access */
!         p[0] = val;
!         s->rsar++;
!         s->rcnt--;
      }
      /* wrap */
      if (s->rsar == s->stop)
--- 392,418 ----
      uint8_t *p;
  
  #ifdef DEBUG_NE2000
!     printf("NE2000: asic write addr=%x rsar=%x val=0x%04x\n", addr, s->rsar, val);
  #endif
      p = s->mem + s->rsar;
!     if (s->rcnt == 0)
! 	    return;
!     if (s->rsar < 32 || (s->rsar >= NE2000_PMEM_START && s->rsar < NE2000_MEM_SIZE)) { /*RD*/
! 	    if (s->dcfg & 0x01) {
! 		    /* 16 bit access */
! 		    p[0] = val;
! 		    p[1] = val >> 8;
! 		    s->rsar += 2;
! 		    s->rcnt -= 2;
! 	    } else {
! 		    /* 8 bit access */
! 		    p[0] = val;
! 		    s->rsar++;
! 		    s->rcnt--;
! 	    }
      } else {
! 	    s->rcnt=0; /*RD*/
! 	    s->rsar += 1 + (s->dcfg & 0x01);
      }
      /* wrap */
      if (s->rsar == s->stop)
***************
*** 411,426 ****
      int ret;
  
      p = s->mem + s->rsar;
!     if (s->dcfg & 0x01) {
!         /* 16 bit access */
!         ret = p[0] | (p[1] << 8);
!         s->rsar += 2;
!         s->rcnt -= 2;
      } else {
!         /* 8 bit access */
!         ret = p[0];
!         s->rsar++;
!         s->rcnt--;
      }
      /* wrap */
      if (s->rsar == s->stop)
--- 431,451 ----
      int ret;
  
      p = s->mem + s->rsar;
!     if (s->rsar < 32 || (s->rsar >= NE2000_PMEM_START && s->rsar < NE2000_MEM_SIZE)) { /*RD*/
! 	    if (s->dcfg & 0x01) {
! 		    /* 16 bit access */
! 		    ret = p[0] | (p[1] << 8);
! 		    s->rsar += 2;
! 		    s->rcnt -= 2;
! 	    } else {
! 		    /* 8 bit access */
! 		    ret = p[0];
! 		    s->rsar++;
! 		    s->rcnt--;
! 	    }
      } else {
! 	    s->rsar += 1 + (s->dcfg & 0x01); 
! 	    ret = 0x00ff; /*RD*/
      }
      /* wrap */
      if (s->rsar == s->stop)
***************
*** 431,437 ****
          ne2000_update_irq(s);
      }
  #ifdef DEBUG_NE2000
!     printf("NE2000: asic read val=0x%04x\n", ret);
  #endif
      return ret;
  }
--- 456,462 ----
          ne2000_update_irq(s);
      }
  #ifdef DEBUG_NE2000
!     printf("NE2000: asic read addr=%x rsar=%x val=0x%04x\n", addr, s->rsar, ret);
  #endif
      return ret;
  }

[Qemu-devel] Re: ne2000 patches (now it works on win98)

[Renzo Davoli]

[-- Attachment #1: Type: text/plain, Size: 36 bytes --]

Screendump of ie working....

renzo

[-- Attachment #2: ie.png --]
[-- Type: image/png, Size: 24980 bytes --]

Re: [Qemu-devel] Re: ne2000 patches (now it works on win98)

[Hetz Ben Hamo]

On Saturday 27 March 2004 01:21 pm, Renzo Davoli wrote:
> Screendump of ie working....
>
> renzo

Is this a fresh install of win98 using QEMU? my tests of installing shows that 
the install of win98SE detecds "bad CD" after 6% of installation progress..

Thanks,
Hetz

Re: [Qemu-devel] Re: ne2000 patches (now it works on win98)

[Renzo Davoli]

On Sat, Mar 27, 2004 at 06:56:15PM +0200, Hetz Ben Hamo wrote:
> Is this a fresh install of win98 using QEMU? my tests of installing shows that 
> the install of win98SE detecds "bad CD" after 6% of installation progress..

yes.
I have installed Win98SE from scratch using the MSDN CD-ROM.
I have started the installation from a rescue disk (in which I have
kept only the oakcdrom.sys driver - I had some trouble with the others).

All the installation went okay but at the reboot it did not recognize the
cdrom. I copied oakcdrom.sys in c:\windows\system and I added:

to c:\config.sys
device=c:\windows\system\oakcdrom.sys /D:MSCD001

to c:\autoexec.bat
mscdex /D:MSCD001

Then I could access also the cdrom.

The network interface is configured as novell-antherm "NE 2000
compatible"
IRQ and IOMEM must be configured by hand.

I have already a problem with the video adapter.
At boot time it says there is a configuration problem, but I have not
found yet a way to reconfigure it. I was told there is a vesa driver for
bochs somewhere....
For now it works as a standard vga 640x480/4bits.

renzo