* [Qemu-devel] winblows 2k on OSX? @ 2004-07-22 18:03 Jason 2004-07-22 18:24 ` [Qemu-devel] " Ben Pfaff 0 siblings, 1 reply; 14+ messages in thread From: Jason @ 2004-07-22 18:03 UTC (permalink / raw) To: qemu-devel a friend just turned me onto the qemu and I have it installed on my powerbook running OSX. Ive run the sample linux and dos images, but how would I go about installing win2k from CD? regards, Jason ^ permalink raw reply [flat|nested] 14+ messages in thread
* [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 18:03 [Qemu-devel] winblows 2k on OSX? Jason @ 2004-07-22 18:24 ` Ben Pfaff 2004-07-22 18:39 ` Jason 0 siblings, 1 reply; 14+ messages in thread From: Ben Pfaff @ 2004-07-22 18:24 UTC (permalink / raw) To: qemu-devel Jason <jason@monsterjam.org> writes: > a friend just turned me onto the qemu and I have it installed on my powerbook > running OSX. Ive run the sample linux and dos images, but how would I go about > installing win2k from CD? Create a disk image, e.g. w2k.img, then boot Windows 2k from the CD, e.g.: qemu w2k.img -cdrom /dev/cdrom -boot d I don't know what the name of the OS X CD-ROM device is; the above assumes /dev/cdrom. After install finishes, you should be able to boot directly from the disk image, e.g. qemu w2k.img -- "Debian for hackers, Red Hat for suits, Slackware for loons." --CmdrTaco <URL:http://slashdot.org/articles/99/03/22/0928207.shtml> ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 18:24 ` [Qemu-devel] " Ben Pfaff @ 2004-07-22 18:39 ` Jason 2004-07-22 18:44 ` Ben Pfaff 2004-07-22 19:09 ` René Korthaus 0 siblings, 2 replies; 14+ messages in thread From: Jason @ 2004-07-22 18:39 UTC (permalink / raw) To: blp, qemu-devel well, I was using that actually, but I just wanted to doublecheck.. I created a blank image file, and when I run that, I get mybox:~/qemu_images root# /opt/local/bin/qemu win2k.img -cdrom /dev/disk1s0 -boot d /dev/disk1s0: Device busy qemu: could not open hard disk image '/dev/disk1s0 mybox:~/qemu_images root# thats after I ejected, re-inserted the win2k cdrom. Im not sure why its busy, but Im sure that /dev/disk1s0 is the CDROM on OSX. regards, Jason On Thu, Jul 22, 2004 at 11:24:08AM -0700, Ben Pfaff wrote: > Jason <jason@monsterjam.org> writes: > > > a friend just turned me onto the qemu and I have it installed on my powerbook > > running OSX. Ive run the sample linux and dos images, but how would I go about > > installing win2k from CD? > > Create a disk image, e.g. w2k.img, then boot Windows 2k from the > CD, e.g.: > qemu w2k.img -cdrom /dev/cdrom -boot d > I don't know what the name of the OS X CD-ROM device is; the > above assumes /dev/cdrom. > > After install finishes, you should be able to boot directly from > the disk image, e.g. > qemu w2k.img > -- > "Debian for hackers, Red Hat for suits, Slackware for loons." > --CmdrTaco <URL:http://slashdot.org/articles/99/03/22/0928207.shtml> > > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel -- ================================================ | Jason Welsh jason@monsterjam.org | | http://monsterjam.org DSS PGP: 0x5E30CC98 | | gpg key: http://monsterjam.org/gpg/ | ================================================ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 18:39 ` Jason @ 2004-07-22 18:44 ` Ben Pfaff 2004-07-22 19:00 ` Jason 2004-07-22 19:09 ` René Korthaus 1 sibling, 1 reply; 14+ messages in thread From: Ben Pfaff @ 2004-07-22 18:44 UTC (permalink / raw) To: Jason; +Cc: qemu-devel Jason <jason@monsterjam.org> writes: > well, I was using that actually, but I just wanted to doublecheck.. > I created a blank image file, and when I run that, I get > > mybox:~/qemu_images root# /opt/local/bin/qemu win2k.img -cdrom /dev/disk1s0 -boot d > /dev/disk1s0: Device busy > qemu: could not open hard disk image '/dev/disk1s0 > mybox:~/qemu_images root# > > thats after I ejected, re-inserted the win2k cdrom. Im not sure why its busy, > but Im sure that /dev/disk1s0 is the CDROM on OSX. I don't know how OS X works, so I don't know the correct solution for this. But if you can copy the CD-ROM to an ISO image file, then it should work to specify the ISO file as the argument to CD-ROM. This is what I always do. -- On Perl: "It's as if H.P. Lovecraft, returned from the dead and speaking by seance to Larry Wall, designed a language both elegant and terrifying for his Elder Things to write programs in, and forgot that the Shoggoths didn't turn out quite so well in the long run." --Matt Olson ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 18:44 ` Ben Pfaff @ 2004-07-22 19:00 ` Jason 2004-07-22 19:55 ` Laurent Amon 0 siblings, 1 reply; 14+ messages in thread From: Jason @ 2004-07-22 19:00 UTC (permalink / raw) To: Ben Pfaff; +Cc: qemu-devel Ok, I was thinking thats what I should do, but thanks for confirming it! ;) Jason On Thu, Jul 22, 2004 at 11:44:30AM -0700, Ben Pfaff wrote: > Jason <jason@monsterjam.org> writes: > > > well, I was using that actually, but I just wanted to doublecheck.. > > I created a blank image file, and when I run that, I get > > > > mybox:~/qemu_images root# /opt/local/bin/qemu win2k.img -cdrom /dev/disk1s0 -boot d > > /dev/disk1s0: Device busy > > qemu: could not open hard disk image '/dev/disk1s0 > > mybox:~/qemu_images root# > > > > thats after I ejected, re-inserted the win2k cdrom. Im not sure why its busy, > > but Im sure that /dev/disk1s0 is the CDROM on OSX. > > I don't know how OS X works, so I don't know the correct solution > for this. But if you can copy the CD-ROM to an ISO image file, > then it should work to specify the ISO file as the argument to > CD-ROM. This is what I always do. > -- > On Perl: "It's as if H.P. Lovecraft, returned from the dead and speaking by > seance to Larry Wall, designed a language both elegant and terrifying for his > Elder Things to write programs in, and forgot that the Shoggoths didn't turn > out quite so well in the long run." --Matt Olson > -- ================================================ | Jason Welsh jason@monsterjam.org | | http://monsterjam.org DSS PGP: 0x5E30CC98 | | gpg key: http://monsterjam.org/gpg/ | ================================================ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 19:00 ` Jason @ 2004-07-22 19:55 ` Laurent Amon 0 siblings, 0 replies; 14+ messages in thread From: Laurent Amon @ 2004-07-22 19:55 UTC (permalink / raw) To: qemu-devel Right now, it is not possible to use a live cdrom. You need to make an image. If you directly open /dev/disk1s0, you first need to dismount it using disktool -u disk1 or the Disk Utility, but without ejecting it. In addition, a guest Windows sees it as an audio CDROM. On 22 juil. 04, at 21:00, Jason wrote: > Ok, I was thinking thats what I should do, but thanks for confirming > it! ;) > > Jason > > On Thu, Jul 22, 2004 at 11:44:30AM -0700, Ben Pfaff wrote: >> Jason <jason@monsterjam.org> writes: >> >>> well, I was using that actually, but I just wanted to doublecheck.. >>> I created a blank image file, and when I run that, I get >>> >>> mybox:~/qemu_images root# /opt/local/bin/qemu win2k.img -cdrom >>> /dev/disk1s0 -boot d >>> /dev/disk1s0: Device busy >>> qemu: could not open hard disk image '/dev/disk1s0 >>> mybox:~/qemu_images root# >>> >>> thats after I ejected, re-inserted the win2k cdrom. Im not sure why >>> its busy, >>> but Im sure that /dev/disk1s0 is the CDROM on OSX. >> >> I don't know how OS X works, so I don't know the correct solution >> for this. But if you can copy the CD-ROM to an ISO image file, >> then it should work to specify the ISO file as the argument to >> CD-ROM. This is what I always do. >> -- >> On Perl: "It's as if H.P. Lovecraft, returned from the dead and >> speaking by >> seance to Larry Wall, designed a language both elegant and terrifying >> for his >> Elder Things to write programs in, and forgot that the Shoggoths >> didn't turn >> out quite so well in the long run." --Matt Olson >> > > -- > ================================================ > | Jason Welsh jason@monsterjam.org | > | http://monsterjam.org DSS PGP: 0x5E30CC98 | > | gpg key: http://monsterjam.org/gpg/ | > ================================================ > > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 18:39 ` Jason 2004-07-22 18:44 ` Ben Pfaff @ 2004-07-22 19:09 ` René Korthaus 2004-07-22 19:13 ` André Braga 1 sibling, 1 reply; 14+ messages in thread From: René Korthaus @ 2004-07-22 19:09 UTC (permalink / raw) To: qemu-devel Am 22.07.2004 um 20:39 schrieb Jason: > well, I was using that actually, but I just wanted to doublecheck.. > I created a blank image file, and when I run that, I get > > mybox:~/qemu_images root# /opt/local/bin/qemu win2k.img -cdrom > /dev/disk1s0 -boot d > /dev/disk1s0: Device busy > qemu: could not open hard disk image '/dev/disk1s0 > mybox:~/qemu_images root# > > thats after I ejected, re-inserted the win2k cdrom. Im not sure why > its busy, > but Im sure that /dev/disk1s0 is the CDROM on OSX. I tried booting qnx 6.2.1 with -cdrom /dev/disk1 on ibook (got device name out of system profiler) and cdrom mounted in finder. Could not access cd0 from qnx, but unmounting the cdrom drive by the finder did not eject it also!! So i guess it was used by qnx now. All of your variants with -cdrom /dev/disk xy resulted in "could not open hard disk image....", but booting with /dev/disk1 worked til "could not read boot disk" by bios-screen. I cannot try this with a bootable cd, because i justed moved and cannot find my w98 and w2k cds. But i will have a look and post.... > > regards, > Jason > > > > On Thu, Jul 22, 2004 at 11:24:08AM -0700, Ben Pfaff wrote: >> Jason <jason@monsterjam.org> writes: >> >>> a friend just turned me onto the qemu and I have it installed on my >>> powerbook >>> running OSX. Ive run the sample linux and dos images, but how would >>> I go about >>> installing win2k from CD? >> >> Create a disk image, e.g. w2k.img, then boot Windows 2k from the >> CD, e.g.: >> qemu w2k.img -cdrom /dev/cdrom -boot d >> I don't know what the name of the OS X CD-ROM device is; the >> above assumes /dev/cdrom. >> >> After install finishes, you should be able to boot directly from >> the disk image, e.g. >> qemu w2k.img >> -- >> "Debian for hackers, Red Hat for suits, Slackware for loons." >> --CmdrTaco <URL:http://slashdot.org/articles/99/03/22/0928207.shtml> >> >> >> >> _______________________________________________ >> Qemu-devel mailing list >> Qemu-devel@nongnu.org >> http://lists.nongnu.org/mailman/listinfo/qemu-devel > > -- > ================================================ > | Jason Welsh jason@monsterjam.org | > | http://monsterjam.org DSS PGP: 0x5E30CC98 | > | gpg key: http://monsterjam.org/gpg/ | > ================================================ > > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > > ----------------------------------------------------- Qemu on Mac OS X Tutorial http://cordney.com/mymacintosh/doku.php?id=wiki:qemu Please add patches and screenshots ----------------------------------------------------- ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 19:09 ` René Korthaus @ 2004-07-22 19:13 ` André Braga 2004-07-22 19:44 ` René Korthaus 0 siblings, 1 reply; 14+ messages in thread From: André Braga @ 2004-07-22 19:13 UTC (permalink / raw) To: qemu-devel I tried running a CD straight from the block device node and it failed *every time*, irregardless of the permissions or the user I tried running QEMU from. So I'd say you can't do it, as simple as that (but I haven't tried booting straight as the root user on OS X; that might work but I seriously doubt it). Images always work, though. André On Thu, 22 Jul 2004 21:09:08 +0200, René Korthaus <wlannews@cordney.com> wrote: > > Am 22.07.2004 um 20:39 schrieb Jason: > > > well, I was using that actually, but I just wanted to doublecheck.. > > I created a blank image file, and when I run that, I get > > > > mybox:~/qemu_images root# /opt/local/bin/qemu win2k.img -cdrom > > /dev/disk1s0 -boot d > > /dev/disk1s0: Device busy > > qemu: could not open hard disk image '/dev/disk1s0 > > mybox:~/qemu_images root# > > > > thats after I ejected, re-inserted the win2k cdrom. Im not sure why > > its busy, > > but Im sure that /dev/disk1s0 is the CDROM on OSX. > > I tried booting qnx 6.2.1 with -cdrom /dev/disk1 on ibook (got device > name out of system profiler) and cdrom mounted in finder. Could not > access cd0 from qnx, but unmounting the cdrom drive by the finder did > not eject it also!! So i guess it was used by qnx now. All of your > variants with -cdrom /dev/disk xy resulted in "could not open hard disk > image....", but booting with /dev/disk1 worked til "could not read boot > disk" by bios-screen. I cannot try this with a bootable cd, because i > justed moved and cannot find my w98 and w2k cds. But i will have a look > and post.... > > > > > regards, > > Jason > > > > > > > > On Thu, Jul 22, 2004 at 11:24:08AM -0700, Ben Pfaff wrote: > >> Jason <jason@monsterjam.org> writes: > >> > >>> a friend just turned me onto the qemu and I have it installed on my > >>> powerbook > >>> running OSX. Ive run the sample linux and dos images, but how would > >>> I go about > >>> installing win2k from CD? > >> > >> Create a disk image, e.g. w2k.img, then boot Windows 2k from the > >> CD, e.g.: > >> qemu w2k.img -cdrom /dev/cdrom -boot d > >> I don't know what the name of the OS X CD-ROM device is; the > >> above assumes /dev/cdrom. > >> > >> After install finishes, you should be able to boot directly from > >> the disk image, e.g. > >> qemu w2k.img -- "Physics is not a religion. If it were, we'd have a much easier time raising money" -Leon Lenderman ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 19:13 ` André Braga @ 2004-07-22 19:44 ` René Korthaus 2004-07-22 19:58 ` André Braga 2004-07-22 22:16 ` Jason 0 siblings, 2 replies; 14+ messages in thread From: René Korthaus @ 2004-07-22 19:44 UTC (permalink / raw) To: qemu-devel Am 22.07.2004 um 21:13 schrieb André Braga: > I tried running a CD straight from the block device node and it failed > *every time*, irregardless of the permissions or the user I tried > running QEMU from. So I'd say you can't do it, as simple as that (but > I haven't tried booting straight as the root user on OS X; that might > work but I seriously doubt it). Images always work, though. > Someone just said some days ago, that you have to unmount the disk first, so i tried but it failed. Now i tried sudo umount /dev/disk1s1s2 and it worked. It still appears in the finder window, but clicking on it exits in an error (original not found...). Now starting Qemu with -cdrom /dev/disk1 lets the cdrom drive start running (can hear it), it lasts 3/4 seconds and qemu starts. boot failure 0003. But i guess thats because i still havent found bootable disk. Please try yourself and tell me. Thanks. > André > > On Thu, 22 Jul 2004 21:09:08 +0200, René Korthaus > <wlannews@cordney.com> wrote: >> >> Am 22.07.2004 um 20:39 schrieb Jason: >> >>> well, I was using that actually, but I just wanted to doublecheck.. >>> I created a blank image file, and when I run that, I get >>> >>> mybox:~/qemu_images root# /opt/local/bin/qemu win2k.img -cdrom >>> /dev/disk1s0 -boot d >>> /dev/disk1s0: Device busy >>> qemu: could not open hard disk image '/dev/disk1s0 >>> mybox:~/qemu_images root# >>> >>> thats after I ejected, re-inserted the win2k cdrom. Im not sure why >>> its busy, >>> but Im sure that /dev/disk1s0 is the CDROM on OSX. >> >> I tried booting qnx 6.2.1 with -cdrom /dev/disk1 on ibook (got device >> name out of system profiler) and cdrom mounted in finder. Could not >> access cd0 from qnx, but unmounting the cdrom drive by the finder did >> not eject it also!! So i guess it was used by qnx now. All of your >> variants with -cdrom /dev/disk xy resulted in "could not open hard >> disk >> image....", but booting with /dev/disk1 worked til "could not read >> boot >> disk" by bios-screen. I cannot try this with a bootable cd, because i >> justed moved and cannot find my w98 and w2k cds. But i will have a >> look >> and post.... >> >>> >>> regards, >>> Jason >>> >>> >>> >>> On Thu, Jul 22, 2004 at 11:24:08AM -0700, Ben Pfaff wrote: >>>> Jason <jason@monsterjam.org> writes: >>>> >>>>> a friend just turned me onto the qemu and I have it installed on my >>>>> powerbook >>>>> running OSX. Ive run the sample linux and dos images, but how would >>>>> I go about >>>>> installing win2k from CD? >>>> >>>> Create a disk image, e.g. w2k.img, then boot Windows 2k from the >>>> CD, e.g.: >>>> qemu w2k.img -cdrom /dev/cdrom -boot d >>>> I don't know what the name of the OS X CD-ROM device is; the >>>> above assumes /dev/cdrom. >>>> >>>> After install finishes, you should be able to boot directly from >>>> the disk image, e.g. >>>> qemu w2k.img > > > > -- > "Physics is not a religion. If it were, we'd have a much easier time > raising money" > -Leon Lenderman > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > > ----------------------------------------------------- Qemu on Mac OS X Tutorial http://cordney.com/mymacintosh/doku.php?id=wiki:qemu Please add patches and screenshots ----------------------------------------------------- ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 19:44 ` René Korthaus @ 2004-07-22 19:58 ` André Braga 2004-07-22 21:42 ` Laurent Amon 2004-07-22 22:16 ` Jason 1 sibling, 1 reply; 14+ messages in thread From: André Braga @ 2004-07-22 19:58 UTC (permalink / raw) To: qemu-devel I did that too, because I created the CD image using 'sudo umount' and 'dd' :) Exactly same symptoms And my CD is definitely bootable... So I still stand by my position that you can't make QEMU read the block device node for the CD-ROM yet. On Thu, 22 Jul 2004 21:44:09 +0200, René Korthaus <wlannews@cordney.com> wrote: > Someone just said some days ago, that you have to unmount the disk > first, so i tried but it failed. Now i tried sudo umount /dev/disk1s1s2 > and it worked. It still appears in the finder window, but clicking on > it exits in an error (original not found...). Now starting Qemu with > -cdrom /dev/disk1 lets the cdrom drive start running (can hear it), it > lasts 3/4 seconds and qemu starts. boot failure 0003. But i guess thats > because i still havent found bootable disk. Please try yourself and > tell me. > -- "Logic: merely enables one to be wrong with authority" -Doctor Who ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 19:58 ` André Braga @ 2004-07-22 21:42 ` Laurent Amon 0 siblings, 0 replies; 14+ messages in thread From: Laurent Amon @ 2004-07-22 21:42 UTC (permalink / raw) To: meianoite, qemu-devel As I said, under Win98, I have been able to mount a CD from the block device, but it appears as an Audio CD, so I guess the problem is in the device code that does not interface correctly with Darwin. I'd like to know if somebody has been able to do it with Darwin/x86. Lga. On 22 juil. 04, at 21:58, André Braga wrote: > I did that too, because I created the CD image using 'sudo umount' and > 'dd' :) > > Exactly same symptoms And my CD is definitely bootable... So I still > stand by my position that you can't make QEMU read the block device > node for the CD-ROM yet. > > > On Thu, 22 Jul 2004 21:44:09 +0200, René Korthaus > <wlannews@cordney.com> wrote: > >> Someone just said some days ago, that you have to unmount the disk >> first, so i tried but it failed. Now i tried sudo umount >> /dev/disk1s1s2 >> and it worked. It still appears in the finder window, but clicking on >> it exits in an error (original not found...). Now starting Qemu with >> -cdrom /dev/disk1 lets the cdrom drive start running (can hear it), it >> lasts 3/4 seconds and qemu starts. boot failure 0003. But i guess >> thats >> because i still havent found bootable disk. Please try yourself and >> tell me. >> > > -- > "Logic: merely enables one to be wrong with authority" > -Doctor Who > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel > > ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 19:44 ` René Korthaus 2004-07-22 19:58 ` André Braga @ 2004-07-22 22:16 ` Jason 2004-07-23 5:01 ` Brad Campbell 1 sibling, 1 reply; 14+ messages in thread From: Jason @ 2004-07-22 22:16 UTC (permalink / raw) To: qemu-devel thanks folks, Ive got win2k installing.. but it appears to hang at the "installing devices" screen.. suggestions? Ive restarted the install and tried to rescue/repair the session, but it still seems to hang at that spot. Or does it just take a ridiculously long time? ;) Jason ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-22 22:16 ` Jason @ 2004-07-23 5:01 ` Brad Campbell 2004-07-23 12:14 ` Jason 0 siblings, 1 reply; 14+ messages in thread From: Brad Campbell @ 2004-07-23 5:01 UTC (permalink / raw) To: qemu-devel Jason wrote: > spot. Or does it just take a ridiculously long time? ;) Umm.. yes :p) (Mine takes nearly 2 hours on a 2Ghz Athlon) Brad ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [Qemu-devel] Re: winblows 2k on OSX? 2004-07-23 5:01 ` Brad Campbell @ 2004-07-23 12:14 ` Jason 0 siblings, 0 replies; 14+ messages in thread From: Jason @ 2004-07-23 12:14 UTC (permalink / raw) To: qemu-devel yes, it was VERY slow.. but I got it running.. thanks for the help folks.. keep up the great work! Jason On Fri, Jul 23, 2004 at 09:01:18AM +0400, Brad Campbell wrote: > Jason wrote: > > >spot. Or does it just take a ridiculously long time? ;) > > Umm.. yes :p) (Mine takes nearly 2 hours on a 2Ghz Athlon) > > Brad > > > _______________________________________________ > Qemu-devel mailing list > Qemu-devel@nongnu.org > http://lists.nongnu.org/mailman/listinfo/qemu-devel -- ================================================ | Jason Welsh jason@monsterjam.org | | http://monsterjam.org DSS PGP: 0x5E30CC98 | | gpg key: http://monsterjam.org/gpg/ | ================================================ ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2004-07-23 12:19 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-07-22 18:03 [Qemu-devel] winblows 2k on OSX? Jason 2004-07-22 18:24 ` [Qemu-devel] " Ben Pfaff 2004-07-22 18:39 ` Jason 2004-07-22 18:44 ` Ben Pfaff 2004-07-22 19:00 ` Jason 2004-07-22 19:55 ` Laurent Amon 2004-07-22 19:09 ` René Korthaus 2004-07-22 19:13 ` André Braga 2004-07-22 19:44 ` René Korthaus 2004-07-22 19:58 ` André Braga 2004-07-22 21:42 ` Laurent Amon 2004-07-22 22:16 ` Jason 2004-07-23 5:01 ` Brad Campbell 2004-07-23 12:14 ` Jason
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).