From mboxrd@z Thu Jan  1 00:00:00 1970
Received: from mailman by lists.gnu.org with tmda-scanned (Exim 4.33)
	id 1CRQOv-0002ZW-0u
	for qemu-devel@nongnu.org; Tue, 09 Nov 2004 02:26:49 -0500
Received: from exim by lists.gnu.org with spam-scanned (Exim 4.33)
	id 1CRQOu-0002ZK-CN
	for qemu-devel@nongnu.org; Tue, 09 Nov 2004 02:26:48 -0500
Received: from [199.232.76.173] (helo=monty-python.gnu.org)
	by lists.gnu.org with esmtp (Exim 4.33) id 1CRQOu-0002ZH-9q
	for qemu-devel@nongnu.org; Tue, 09 Nov 2004 02:26:48 -0500
Received: from [196.35.40.69] (helo=absamail.co.za)
	by monty-python.gnu.org with esmtp (Exim 4.34) id 1CRQGI-0008CR-BG
	for qemu-devel@nongnu.org; Tue, 09 Nov 2004 02:17:55 -0500
From: Bob Barry <bobb@absamail.co.za>
Date: Tue, 9 Nov 2004 09:17:24 +0200
MIME-Version: 1.0
Content-Disposition: inline
Content-Type: text/plain;
  charset="us-ascii"
Content-Transfer-Encoding: 7bit
Message-Id: <200411090917.24153.bobb@absamail.co.za>
Subject: [Qemu-devel] patch: i386-users/Makefile
Reply-To: bobb@absamail.co.za, qemu-devel@nongnu.org
List-Id: qemu-devel.nongnu.org
List-Unsubscribe: <http://lists.nongnu.org/mailman/listinfo/qemu-devel>,
	<mailto:qemu-devel-request@nongnu.org?subject=unsubscribe>
List-Archive: <http://lists.gnu.org/pipermail/qemu-devel>
List-Post: <mailto:qemu-devel@nongnu.org>
List-Help: <mailto:qemu-devel-request@nongnu.org?subject=help>
List-Subscribe: <http://lists.nongnu.org/mailman/listinfo/qemu-devel>,
	<mailto:qemu-devel-request@nongnu.org?subject=subscribe>
To: Fabrice Bellard <fabrice@bellard.org>, Hetz Ben Hamo <hetz@witch.dyndns.org>
Cc: qemu-devel@nongnu.org

Fabrice & Hetz -

CVS would not compile last night or this morning.
A section of the Makefile merge was not completed
(>>>>> and ====== and <<<<<< remained).  I got
lost in the "if's" and "endif's" while looking for the
fault, so the patch is mostly indentation.  Discard
it if it offends "make" purists.

Compilation now runs, but fails:
 qemu/hw/sb16.c:106: storage size of `dsp' isn't known

Thanks,

Bob

===============================================

--- qemu/i386-user/Makefile.orig 2004-11-09 07:55:48.021041760 +0200
+++ qemu/i386-user/Makefile 2004-11-09 08:26:35.497182696 +0200
@@ -14,8 +14,8 @@
 VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw:$(SRC_PATH)/audio
 DEFINES=-I. -I$(TARGET_PATH) -I$(SRC_PATH)
 ifdef CONFIG_USER_ONLY
-VPATH+=:$(SRC_PATH)/linux-user
-DEFINES+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ARCH)
+ VPATH+=:$(SRC_PATH)/linux-user
+ DEFINES+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ARCH)
 endif
 CFLAGS=-Wall -O2 -g -fno-strict-aliasing
 LDFLAGS=-g
@@ -26,165 +26,165 @@
 QEMU_USER=qemu-$(TARGET_ARCH)
 # system emulator name
 ifdef CONFIG_SOFTMMU
-ifeq ($(TARGET_ARCH), i386)
-QEMU_SYSTEM=qemu$(EXESUF)
-else
-QEMU_SYSTEM=qemu-system-$(TARGET_ARCH)$(EXESUF)
-endif
+ ifeq ($(TARGET_ARCH), i386)
+  QEMU_SYSTEM=qemu$(EXESUF)
+ else
+  QEMU_SYSTEM=qemu-system-$(TARGET_ARCH)$(EXESUF)
+ endif
 else
-QEMU_SYSTEM=qemu-fast
+ QEMU_SYSTEM=qemu-fast
 endif
 
 ifdef CONFIG_USER_ONLY
-PROGS=$(QEMU_USER)
+ PROGS=$(QEMU_USER)
 else
-ifeq ($(TARGET_ARCH), i386)
-
-ifeq ($(ARCH), i386)
-PROGS+=$(QEMU_SYSTEM)
-ifndef CONFIG_SOFTMMU
-CONFIG_STATIC=y
-endif
-else
-# the system emulator using soft mmu is portable
-ifdef CONFIG_SOFTMMU
-PROGS+=$(QEMU_SYSTEM)
-endif
-endif # ARCH != i386
-
-endif # TARGET_ARCH = i386
+ ifeq ($(TARGET_ARCH), i386)
 
-ifeq ($(TARGET_ARCH), ppc)
-
-ifeq ($(ARCH), ppc)
-PROGS+=$(QEMU_SYSTEM)
-endif
-
-ifeq ($(ARCH), i386)
-ifdef CONFIG_SOFTMMU
-PROGS+=$(QEMU_SYSTEM)
-endif
-endif # ARCH = i386
+  ifeq ($(ARCH), i386)
+   PROGS+=$(QEMU_SYSTEM)
+   ifndef CONFIG_SOFTMMU
+    CONFIG_STATIC=y
+   endif
+  else
+   # the system emulator using soft mmu is portable
+   ifdef CONFIG_SOFTMMU
+    PROGS+=$(QEMU_SYSTEM)
+   endif
+  endif # ARCH != i386
+
+ endif # TARGET_ARCH = i386
+
+ ifeq ($(TARGET_ARCH), ppc)
+
+  ifeq ($(ARCH), ppc)
+   PROGS+=$(QEMU_SYSTEM)
+  endif
+
+  ifeq ($(ARCH), i386)
+   ifdef CONFIG_SOFTMMU
+    PROGS+=$(QEMU_SYSTEM)
+   endif
+  endif # ARCH = i386
+
+  ifeq ($(ARCH), amd64)
+   ifdef CONFIG_SOFTMMU
+    PROGS+=$(QEMU_SYSTEM)
+   endif
+  endif # ARCH = amd64
+
+ endif # TARGET_ARCH = ppc
+
+ ifeq ($(TARGET_ARCH), sparc)
+
+  ifeq ($(ARCH), ppc)
+  PROGS+=$(QEMU_SYSTEM)
+  endif
+
+  ifeq ($(ARCH), i386)
+   ifdef CONFIG_SOFTMMU
+    PROGS+=$(QEMU_SYSTEM)
+   endif
+  endif # ARCH = i386
+
+  ifeq ($(ARCH), amd64)
+   ifdef CONFIG_SOFTMMU
+    PROGS+=$(QEMU_SYSTEM)
+   endif
+  endif # ARCH = amd64
 
-ifeq ($(ARCH), amd64)
-ifdef CONFIG_SOFTMMU
-PROGS+=$(QEMU_SYSTEM)
-endif
-endif # ARCH = amd64
-
-endif # TARGET_ARCH = ppc
-
-ifeq ($(TARGET_ARCH), sparc)
-
-ifeq ($(ARCH), ppc)
-PROGS+=$(QEMU_SYSTEM)
-endif
-
-ifeq ($(ARCH), i386)
-ifdef CONFIG_SOFTMMU
-PROGS+=$(QEMU_SYSTEM)
-endif
-endif # ARCH = i386
-
-ifeq ($(ARCH), amd64)
-ifdef CONFIG_SOFTMMU
-PROGS+=$(QEMU_SYSTEM)
-endif
-endif # ARCH = amd64
-
-endif # TARGET_ARCH = sparc
+ endif # TARGET_ARCH = sparc
 endif # !CONFIG_USER_ONLY
 
 ifdef CONFIG_STATIC
-LDFLAGS+=-static
+ LDFLAGS+=-static
 endif
 
 ifeq ($(ARCH),i386)
-CFLAGS+=-fomit-frame-pointer
-OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2
-ifeq ($(HAVE_GCC3_OPTIONS),yes)
-OP_CFLAGS+= -falign-functions=0 -fno-gcse
-else
-OP_CFLAGS+= -malign-functions=0
-endif
-
-ifdef TARGET_GPROF
-USE_I386_LD=y
-endif
-ifdef CONFIG_STATIC
-USE_I386_LD=y
-endif
-ifdef USE_I386_LD
-LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386.ld
-else
-# WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
-# that the kernel ELF loader considers as an executable. I think this
-# is the simplest way to make it self virtualizable!
-LDFLAGS+=-Wl,-shared
-endif
+ CFLAGS+=-fomit-frame-pointer
+ OP_CFLAGS=$(CFLAGS) -mpreferred-stack-boundary=2
+ ifeq ($(HAVE_GCC3_OPTIONS),yes)
+  OP_CFLAGS+= -falign-functions=0 -fno-gcse
+ else
+  OP_CFLAGS+= -malign-functions=0
+ endif
+
+ ifdef TARGET_GPROF
+  USE_I386_LD=y
+ endif
+ ifdef CONFIG_STATIC
+  USE_I386_LD=y
+ endif
+ ifdef USE_I386_LD
+  LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386.ld
+ else
+  # WARNING: this LDFLAGS is _very_ tricky : qemu is an ELF shared object
+  # that the kernel ELF loader considers as an executable. I think this
+  # is the simplest way to make it self virtualizable!
+  LDFLAGS+=-Wl,-shared
+ endif
 endif
 
 ifeq ($(ARCH),amd64)
-OP_CFLAGS=$(CFLAGS) -falign-functions=0
-LDFLAGS+=-Wl,-T,$(SRC_PATH)/amd64.ld
+ OP_CFLAGS=$(CFLAGS) -falign-functions=0
+ LDFLAGS+=-Wl,-T,$(SRC_PATH)/amd64.ld
 endif
 
 ifeq ($(ARCH),ppc)
-CFLAGS+= -D__powerpc__
-OP_CFLAGS=$(CFLAGS)
-LDFLAGS+=-Wl,-T,$(SRC_PATH)/ppc.ld
+ CFLAGS+= -D__powerpc__
+ OP_CFLAGS=$(CFLAGS)
+ LDFLAGS+=-Wl,-T,$(SRC_PATH)/ppc.ld
 endif
 
 ifeq ($(ARCH),s390)
-OP_CFLAGS=$(CFLAGS)
-LDFLAGS+=-Wl,-T,$(SRC_PATH)/s390.ld
+ OP_CFLAGS=$(CFLAGS)
+ LDFLAGS+=-Wl,-T,$(SRC_PATH)/s390.ld
 endif
 
 ifeq ($(ARCH),sparc)
-CFLAGS+=-m32 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
-LDFLAGS+=-m32
-OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
-HELPER_CFLAGS=$(CFLAGS) -ffixed-i0 -mflat
-# -static is used to avoid g1/g3 usage by the dynamic linker
-LDFLAGS+=-Wl,-T,$(SRC_PATH)/sparc.ld -static
+ CFLAGS+=-m32 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
+ LDFLAGS+=-m32
+ OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
+ HELPER_CFLAGS=$(CFLAGS) -ffixed-i0 -mflat
+ # -static is used to avoid g1/g3 usage by the dynamic linker
+ LDFLAGS+=-Wl,-T,$(SRC_PATH)/sparc.ld -static
 endif
 
 ifeq ($(ARCH),sparc64)
-CFLAGS+=-m64 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
-LDFLAGS+=-m64
-OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
+ CFLAGS+=-m64 -ffixed-g1 -ffixed-g2 -ffixed-g3 -ffixed-g6
+ LDFLAGS+=-m64
+ OP_CFLAGS=$(CFLAGS) -fno-delayed-branch -ffixed-i0
 endif
 
 ifeq ($(ARCH),alpha)
-# -msmall-data is not used because we want two-instruction relocations
-# for the constant constructions
-OP_CFLAGS=-Wall -O2 -g
-# Ensure there's only a single GP
-CFLAGS += -msmall-data
-LDFLAGS+=-Wl,-T,$(SRC_PATH)/alpha.ld
+ # -msmall-data is not used because we want two-instruction relocations
+ # for the constant constructions
+ OP_CFLAGS=-Wall -O2 -g
+ # Ensure there's only a single GP
+ CFLAGS += -msmall-data
+ LDFLAGS+=-Wl,-T,$(SRC_PATH)/alpha.ld
 endif
 
 ifeq ($(ARCH),ia64)
-OP_CFLAGS=$(CFLAGS)
+ OP_CFLAGS=$(CFLAGS)
 endif
 
 ifeq ($(ARCH),arm)
-OP_CFLAGS=$(CFLAGS) -mno-sched-prolog
-LDFLAGS+=-Wl,-T,$(SRC_PATH)/arm.ld
+ OP_CFLAGS=$(CFLAGS) -mno-sched-prolog
+ LDFLAGS+=-Wl,-T,$(SRC_PATH)/arm.ld
 endif
 
 ifeq ($(ARCH),m68k)
-OP_CFLAGS=$(CFLAGS) -fomit-frame-pointer
-LDFLAGS+=-Wl,-T,m68k.ld
+ OP_CFLAGS=$(CFLAGS) -fomit-frame-pointer
+ LDFLAGS+=-Wl,-T,m68k.ld
 endif
 
 ifeq ($(HAVE_GCC3_OPTIONS),yes)
-# very important to generate a return at the end of every operation
-OP_CFLAGS+=-fno-reorder-blocks -fno-optimize-sibling-calls
+ # very important to generate a return at the end of every operation
+ OP_CFLAGS+=-fno-reorder-blocks -fno-optimize-sibling-calls
 endif
 
 ifeq ($(CONFIG_DARWIN),yes)
-OP_CFLAGS+= -mdynamic-no-pic
+ OP_CFLAGS+= -mdynamic-no-pic
 endif
 
 #########################################################
@@ -192,16 +192,16 @@
 DEFINES+=-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
 LIBS+=-lm -lstdc++
 ifndef CONFIG_USER_ONLY
-LIBS+=-lz
+ LIBS+=-lz
 endif
 ifdef CONFIG_WIN32
-LIBS+=-lwinmm -lws2_32 -liphlpapi
+ LIBS+=-lwinmm -lws2_32 -liphlpapi
 endif
 
 # profiling code
 ifdef TARGET_GPROF
-LDFLAGS+=-p
-main.o: CFLAGS+=-p
+ LDFLAGS+=-p
+ main.o: CFLAGS+=-p
 endif
 
 OBJS= elfload.o main.o syscall.o mmap.o signal.o path.o osdep.o thunk.o 
@@ -209,58 +209,57 @@
 OBJS+= vm86.o
 endif
 ifeq ($(TARGET_ARCH), arm)
-OBJS+=nwfpe/softfloat.o nwfpe/fpa11.o nwfpe/fpa11_cpdo.o \
-nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
- nwfpe/double_cpdo.o nwfpe/extended_cpdo.o
+ OBJS+=nwfpe/softfloat.o nwfpe/fpa11.o nwfpe/fpa11_cpdo.o \
+ nwfpe/fpa11_cpdt.o nwfpe/fpa11_cprt.o nwfpe/fpopcode.o nwfpe/single_cpdo.o \
+ nwfpe/double_cpdo.o nwfpe/extended_cpdo.o
 endif
 SRCS:= $(OBJS:.o=.c)
 OBJS+= libqemu.a
 
 # cpu emulator library
-LIBOBJS=exec.o translate-all.o cpu-exec.o\
-        translate.o op.o
+LIBOBJS=exec.o translate-all.o cpu-exec.o translate.o op.o
 
 ifeq ($(TARGET_ARCH), i386)
-LIBOBJS+=helper.o helper2.o
-ifeq ($(ARCH), i386)
-LIBOBJS+=translate-copy.o
-endif
+ LIBOBJS+=helper.o helper2.o
+ ifeq ($(ARCH), i386)
+  LIBOBJS+=translate-copy.o
+ endif
 endif
 
 ifeq ($(TARGET_ARCH), ppc)
-LIBOBJS+= op_helper.o helper.o
+ LIBOBJS+= op_helper.o helper.o
 endif
 
 ifeq ($(TARGET_ARCH), sparc)
-LIBOBJS+= op_helper.o helper.o
+ LIBOBJS+= op_helper.o helper.o
 endif
 
 # NOTE: the disassembler code is only needed for debugging
 LIBOBJS+=disas.o 
 ifeq ($(findstring i386, $(TARGET_ARCH) $(ARCH)),i386)
-USE_I386_DIS=y
+ USE_I386_DIS=y
 endif
 ifeq ($(findstring amd64, $(TARGET_ARCH) $(ARCH)),amd64)
-USE_I386_DIS=y
+ USE_I386_DIS=y
 endif
 ifdef USE_I386_DIS
-LIBOBJS+=i386-dis.o
+ LIBOBJS+=i386-dis.o
 endif
 ifeq ($(findstring alpha, $(TARGET_ARCH) $(ARCH)),alpha)
-LIBOBJS+=alpha-dis.o
+ LIBOBJS+=alpha-dis.o
 endif
 ifeq ($(findstring ppc, $(TARGET_ARCH) $(ARCH)),ppc)
-LIBOBJS+=ppc-dis.o
+ LIBOBJS+=ppc-dis.o
 endif
 ifeq ($(findstring sparc, $(TARGET_ARCH) $(ARCH)),sparc)
-LIBOBJS+=sparc-dis.o
+ LIBOBJS+=sparc-dis.o
 endif
 ifeq ($(findstring arm, $(TARGET_ARCH) $(ARCH)),arm)
-LIBOBJS+=arm-dis.o
+ LIBOBJS+=arm-dis.o
 endif
 
 ifeq ($(ARCH),ia64)
-OBJS += ia64-syscall.o
+ OBJS += ia64-syscall.o
 endif
 
 all: $(PROGS)
@@ -268,8 +267,8 @@
 $(QEMU_USER): $(OBJS)
  $(CC) $(LDFLAGS) -o $@ $^  $(LIBS)
 ifeq ($(ARCH),alpha)
-# Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
-# the address space (31 bit so sign extending doesn't matter)
+ # Mark as 32 bit binary, i. e. it will be mapped into the low 31 bit of
+ # the address space (31 bit so sign extending doesn't matter)
  echo -ne '\001\000\000\000' | dd of=qemu bs=1 seek=48 count=4 conv=notrunc
 endif
 
@@ -281,63 +280,57 @@
 AUDIODRV = audio.o ossaudio.o sdlaudio.o wavaudio.o
 
 ifeq ($(USE_ADLIB),1)
-SOUND_HW += fmopl.o adlib.o
-audio.o: DEFINES := -DUSE_ADLIB $(DEFINES)
+ SOUND_HW += fmopl.o adlib.o
+ audio.o: DEFINES := -DUSE_ADLIB $(DEFINES)
 endif
 
 ifeq ($(USE_FMOD),1)
-AUDIODRV += fmodaudio.o
-audio.o fmodaudio.o: DEFINES := -DUSE_FMOD_AUDIO -I$(FMOD_INCLUDE) $(DEFINES)
-LDFLAGS += -L$(FMOD_LIBPATH) -Wl,-rpath,$(FMOD_LIBPATH)
-LIBS += -lfmod-$(FMOD_VERSION)
+ AUDIODRV += fmodaudio.o
+ audio.o fmodaudio.o: DEFINES := -DUSE_FMOD_AUDIO -I$(FMOD_INCLUDE) $(DEFINES)
+ LDFLAGS += -L$(FMOD_LIBPATH) -Wl,-rpath,$(FMOD_LIBPATH)
+ LIBS += -lfmod-$(FMOD_VERSION)
 endif
 
 ifeq ($(TARGET_ARCH), i386)
-# Hardware support
-<<<<<<< Makefile.target
-VL_OBJS+= ide.o ne2000.o pckbd.o vga.o sb16.o dma.o oss.o
-VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o 
-VL_OBJS+= cirrus_vga.o mixeng.o
-=======
-VL_OBJS+= ide.o ne2000.o pckbd.o vga.o $(SOUND_HW) dma.o $(AUDIODRV)
-VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o
-VL_OBJS+= cirrus_vga.o mixeng.o
->>>>>>> 1.44
+ # Hardware support
+ VL_OBJS+= ide.o ne2000.o pckbd.o vga.o $(SOUND_HW) dma.o $(AUDIODRV)
+ VL_OBJS+= fdc.o mc146818rtc.o serial.o i8259.o i8254.o pc.o
+ VL_OBJS+= cirrus_vga.o mixeng.o
 endif
 ifeq ($(TARGET_ARCH), ppc)
-VL_OBJS+= ppc.o ide.o ne2000.o pckbd.o vga.o $(SOUND_HW) dma.o $(AUDIODRV)
-VL_OBJS+= mc146818rtc.o serial.o i8259.o i8254.o fdc.o m48t59.o
-VL_OBJS+= ppc_prep.o ppc_chrp.o cuda.o adb.o openpic.o mixeng.o
+ VL_OBJS+= ppc.o ide.o ne2000.o pckbd.o vga.o $(SOUND_HW) dma.o $(AUDIODRV)
+ VL_OBJS+= mc146818rtc.o serial.o i8259.o i8254.o fdc.o m48t59.o
+ VL_OBJS+= ppc_prep.o ppc_chrp.o cuda.o adb.o openpic.o mixeng.o
 endif
 ifeq ($(TARGET_ARCH), sparc)
-VL_OBJS+= sun4m.o tcx.o lance.o iommu.o sched.o m48t08.o magic-load.o timer.o
+ VL_OBJS+= sun4m.o tcx.o lance.o iommu.o sched.o m48t08.o magic-load.o timer.o
 endif
 ifdef CONFIG_GDBSTUB
-VL_OBJS+=gdbstub.o 
+ VL_OBJS+=gdbstub.o 
 endif
 ifdef CONFIG_SDL
-VL_OBJS+=sdl.o
+ VL_OBJS+=sdl.o
 endif
 ifdef CONFIG_SLIRP
-DEFINES+=-I$(SRC_PATH)/slirp
-SLIRP_OBJS=cksum.o if.o ip_icmp.o ip_input.o ip_output.o \
-slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o \
-tcp_subr.o tcp_timer.o udp.o bootp.o debug.o tftp.o
-VL_OBJS+=$(addprefix slirp/, $(SLIRP_OBJS))
+ DEFINES+=-I$(SRC_PATH)/slirp
+ SLIRP_OBJS=cksum.o if.o ip_icmp.o ip_input.o ip_output.o \
+ slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o \
+ tcp_subr.o tcp_timer.o udp.o bootp.o debug.o tftp.o
+ VL_OBJS+=$(addprefix slirp/, $(SLIRP_OBJS))
 endif
 
 VL_LDFLAGS=
 # specific flags are needed for non soft mmu emulator
 ifdef CONFIG_STATIC
-VL_LDFLAGS+=-static
+ VL_LDFLAGS+=-static
 endif
 ifndef CONFIG_SOFTMMU
-VL_LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386-vl.ld 
+ VL_LDFLAGS+=-Wl,-T,$(SRC_PATH)/i386-vl.ld 
 endif
 ifndef CONFIG_DARWIN
-ifndef CONFIG_WIN32
-VL_LIBS=-lutil
-endif
+ ifndef CONFIG_WIN32
+  VL_LIBS=-lutil
+ endif
 endif
 
 $(QEMU_SYSTEM): $(VL_OBJS) libqemu.a
@@ -375,20 +368,20 @@
  $(CC) $(HELPER_CFLAGS) $(DEFINES) -c -o $@ $<
 
 ifeq ($(TARGET_ARCH), i386)
-op.o: op.c opreg_template.h ops_template.h ops_template_mem.h ops_mem.h
+ op.o: op.c opreg_template.h ops_template.h ops_template_mem.h ops_mem.h
 endif
 
 ifeq ($(TARGET_ARCH), arm)
-op.o: op.c op_template.h
+ op.o: op.c op_template.h
 endif
 
 ifeq ($(TARGET_ARCH), sparc)
-op.o: op.c op_template.h op_mem.h
+ op.o: op.c op_template.h op_mem.h
 endif
 
 ifeq ($(TARGET_ARCH), ppc)
-op.o: op.c op_template.h op_mem.h
-op_helper.o: op_helper_mem.h
+ op.o: op.c op_template.h op_mem.h
+ op_helper.o: op_helper_mem.h
 endif
 
 mixeng.o: mixeng.c mixeng.h mixeng_template.h
@@ -411,5 +404,5 @@
 endif
 
 ifneq ($(wildcard .depend),)
-include .depend
+ include .depend
 endif