From: Thiemo Seufer <ths@networkno.de>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH] Add MIPS ELF loader
Date: Wed, 26 Apr 2006 00:57:13 +0100 [thread overview]
Message-ID: <20060425235713.GA29550@networkno.de> (raw)
In-Reply-To: <444BB67B.3090301@bellard.org>
Fabrice Bellard wrote:
> I just added an ELF loader (inspirated from the SPARC one) which should
> work for all architectures. It supports symbol loading and use the CPU
> physical memory mappings to compute correct RAM addresses.
I extended it so that it provides the ELF entry point address, fixed
a memory leak for the failure case, put the large buffer read in a
read loop, and let the mips-4kc use it with fallback to raw binaries.
Also, the mips support handles a missing BIOS nor in a more graceful
way.
I was busier that I hoped the last days, collecting the MIPS specific
patches may take a few days longer.
Thiemo
Index: qemu-work/hw/mips_r4k.c
===================================================================
--- qemu-work.orig/hw/mips_r4k.c 2006-04-25 23:22:22.000000000 +0100
+++ qemu-work/hw/mips_r4k.c 2006-04-25 23:22:25.000000000 +0100
@@ -5,6 +5,8 @@
#define KERNEL_LOAD_ADDR 0x80010000
#define INITRD_LOAD_ADDR 0x80800000
+#define VIRT_TO_PHYS_ADDEND (-0x80000000LL)
+
extern FILE *logfile;
static PITState *pit;
@@ -101,6 +103,7 @@
cpu_mips_update_count(env, 1, 0);
}
+
static void io_writeb (void *opaque, target_phys_addr_t addr, uint32_t value)
{
#if 0
@@ -189,72 +192,71 @@
const char *initrd_filename)
{
char buf[1024];
- target_ulong kernel_base, kernel_size, initrd_base, initrd_size;
+ int64_t entry = 0;
unsigned long bios_offset;
int io_memory;
- int linux_boot;
int ret;
CPUState *env;
-
- printf("%s: start\n", __func__);
- linux_boot = (kernel_filename != NULL);
+ long kernel_size;
env = cpu_init();
register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
/* allocate RAM */
cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
+
+ /* Try to load a BIOS image. If this fails, we continue regardless,
+ but initialize the hardware ourselves. When a kernel gets
+ preloaded we also initialize the hardware, since the BIOS wasn't
+ run. */
bios_offset = ram_size + vga_ram_size;
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);
printf("%s: load BIOS '%s' size %d\n", __func__, buf, BIOS_SIZE);
ret = load_image(buf, phys_ram_base + bios_offset);
- if (ret != BIOS_SIZE) {
- fprintf(stderr, "qemu: could not load MIPS bios '%s'\n", buf);
- exit(1);
+ if (ret == BIOS_SIZE) {
+ cpu_register_physical_memory((uint32_t)(0x1fc00000),
+ BIOS_SIZE, bios_offset | IO_MEM_ROM);
+ env->PC = 0xBFC00000;
+ if (!kernel_filename)
+ return;
+ } else {
+ /* not fatal */
+ fprintf(stderr, "qemu: Warning, could not load MIPS bios '%s'\n",
+ buf);
}
- cpu_register_physical_memory((uint32_t)(0x1fc00000),
- BIOS_SIZE, bios_offset | IO_MEM_ROM);
-#if 0
- memcpy(phys_ram_base + 0x10000, phys_ram_base + bios_offset, BIOS_SIZE);
- env->PC = 0x80010004;
-#else
- env->PC = 0xBFC00004;
-#endif
- if (linux_boot) {
- kernel_base = KERNEL_LOAD_ADDR;
- /* now we can load the kernel */
- kernel_size = load_image(kernel_filename,
- phys_ram_base + (kernel_base - 0x80000000));
- if (kernel_size == (target_ulong) -1) {
- fprintf(stderr, "qemu: could not load kernel '%s'\n",
- kernel_filename);
- exit(1);
- }
+
+ kernel_size = 0;
+ if (kernel_filename) {
+ kernel_size = load_elf(kernel_filename, VIRT_TO_PHYS_ADDEND, &entry);
+ if (kernel_size >= 0)
+ env->PC = entry;
+ else {
+ kernel_size = load_image(kernel_filename,
+ phys_ram_base + KERNEL_LOAD_ADDR + VIRT_TO_PHYS_ADDEND);
+ if (kernel_size < 0) {
+ fprintf(stderr, "qemu: could not load kernel '%s'\n",
+ kernel_filename);
+ exit(1);
+ }
+ env->PC = KERNEL_LOAD_ADDR;
+ }
+
/* load initrd */
if (initrd_filename) {
- initrd_base = INITRD_LOAD_ADDR;
- initrd_size = load_image(initrd_filename,
- phys_ram_base + initrd_base);
- if (initrd_size == (target_ulong) -1) {
+ if (load_image(initrd_filename,
+ phys_ram_base + INITRD_LOAD_ADDR + VIRT_TO_PHYS_ADDEND)
+ == (target_ulong) -1) {
fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
- } else {
- initrd_base = 0;
- initrd_size = 0;
}
- env->PC = KERNEL_LOAD_ADDR;
+
/* Store command line. */
strcpy (phys_ram_base + (16 << 20) - 256, kernel_cmdline);
/* FIXME: little endian support */
*(int *)(phys_ram_base + (16 << 20) - 260) = tswap32 (0x12345678);
*(int *)(phys_ram_base + (16 << 20) - 264) = tswap32 (ram_size);
- } else {
- kernel_base = 0;
- kernel_size = 0;
- initrd_base = 0;
- initrd_size = 0;
}
/* Init internal devices */
Index: qemu-work/elf_ops.h
===================================================================
--- qemu-work.orig/elf_ops.h 2006-04-25 23:22:22.000000000 +0100
+++ qemu-work/elf_ops.h 2006-04-25 23:23:10.000000000 +0100
@@ -138,7 +138,8 @@
return -1;
}
-int glue(load_elf, SZ)(int fd, int64_t virt_to_phys_addend, int must_swab)
+int glue(load_elf, SZ)(int fd, int64_t virt_to_phys_addend,
+ int must_swab, int64_t *entry)
{
struct elfhdr ehdr;
struct elf_phdr *phdr = NULL, *ph;
@@ -152,6 +153,9 @@
glue(bswap_ehdr, SZ)(&ehdr);
}
+ if (entry)
+ *entry = (int64_t)ehdr.e_entry;
+
glue(load_symbols, SZ)(&ehdr, fd, must_swab);
size = ehdr.e_phnum * sizeof(phdr[0]);
@@ -176,9 +180,29 @@
/* XXX: avoid allocating */
data = qemu_mallocz(mem_size);
if (ph->p_filesz > 0) {
- lseek(fd, ph->p_offset, SEEK_SET);
- if (read(fd, data, ph->p_filesz) != ph->p_filesz)
- goto fail;
+ size_t sz = ph->p_filesz;
+ int retval;
+
+ retval = lseek(fd, ph->p_offset, SEEK_SET);
+ if (retval < 0)
+ goto fail2;
+ while (sz) {
+ retval = read(fd, data, sz);
+ switch (retval) {
+ case -1:
+ goto fail2;
+ case 0: /* EOF */
+ if (sz)
+ goto fail;
+ break;
+ default:
+ if (sz < retval)
+ goto fail2;
+ sz -= retval;
+ retval = 0;
+ break;
+ }
+ }
}
addr = ph->p_vaddr + virt_to_phys_addend;
@@ -190,6 +214,8 @@
}
}
return total_size;
+ fail2:
+ qemu_free(data);
fail:
qemu_free(phdr);
return -1;
Index: qemu-work/hw/sun4m.c
===================================================================
--- qemu-work.orig/hw/sun4m.c 2006-04-25 23:22:22.000000000 +0100
+++ qemu-work/hw/sun4m.c 2006-04-25 23:22:25.000000000 +0100
@@ -269,7 +269,7 @@
prom_offset | IO_MEM_ROM);
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, PROM_FILENAMEE);
- ret = load_elf(buf, 0);
+ ret = load_elf(buf, 0, NULL);
if (ret < 0) {
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, PROM_FILENAMEB);
ret = load_image(buf, phys_ram_base + prom_offset);
@@ -282,7 +282,7 @@
kernel_size = 0;
if (linux_boot) {
- kernel_size = load_elf(kernel_filename, -0xf0000000);
+ kernel_size = load_elf(kernel_filename, -0xf0000000, NULL);
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, phys_ram_base + KERNEL_LOAD_ADDR);
if (kernel_size < 0)
Index: qemu-work/hw/sun4u.c
===================================================================
--- qemu-work.orig/hw/sun4u.c 2006-04-25 23:22:22.000000000 +0100
+++ qemu-work/hw/sun4u.c 2006-04-25 23:22:25.000000000 +0100
@@ -283,7 +283,7 @@
prom_offset | IO_MEM_ROM);
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, PROM_FILENAMEE);
- ret = load_elf(buf, 0);
+ ret = load_elf(buf, 0, NULL);
if (ret < 0) {
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, PROM_FILENAMEB);
ret = load_image(buf, phys_ram_base + prom_offset);
@@ -298,7 +298,7 @@
initrd_size = 0;
if (linux_boot) {
/* XXX: put correct offset */
- kernel_size = load_elf(kernel_filename, 0);
+ kernel_size = load_elf(kernel_filename, 0, NULL);
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, phys_ram_base + KERNEL_LOAD_ADDR);
if (kernel_size < 0)
Index: qemu-work/loader.c
===================================================================
--- qemu-work.orig/loader.c 2006-04-25 23:22:22.000000000 +0100
+++ qemu-work/loader.c 2006-04-25 23:22:25.000000000 +0100
@@ -194,7 +194,8 @@
#include "elf_ops.h"
/* return < 0 if error, otherwise the number of bytes loaded in memory */
-int load_elf(const char *filename, int64_t virt_to_phys_addend)
+int load_elf(const char *filename, int64_t virt_to_phys_addend,
+ int64_t *entry)
{
int fd, data_order, must_swab, ret;
uint8_t e_ident[EI_NIDENT];
@@ -220,9 +221,9 @@
lseek(fd, 0, SEEK_SET);
if (e_ident[EI_CLASS] == ELFCLASS64) {
- ret = load_elf64(fd, virt_to_phys_addend, must_swab);
+ ret = load_elf64(fd, virt_to_phys_addend, must_swab, entry);
} else {
- ret = load_elf32(fd, virt_to_phys_addend, must_swab);
+ ret = load_elf32(fd, virt_to_phys_addend, must_swab, entry);
}
close(fd);
Index: qemu-work/vl.h
===================================================================
--- qemu-work.orig/vl.h 2006-04-25 23:22:22.000000000 +0100
+++ qemu-work/vl.h 2006-04-25 23:22:25.000000000 +0100
@@ -872,7 +872,7 @@
/* loader.c */
int get_image_size(const char *filename);
int load_image(const char *filename, uint8_t *addr);
-int load_elf(const char *filename, int64_t virt_to_phys_addend);
+int load_elf(const char *filename, int64_t virt_to_phys_addend, int64_t *entry);
int load_aout(const char *filename, uint8_t *addr);
/* slavio_timer.c */
next prev parent reply other threads:[~2006-04-25 23:57 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-28 6:57 [Qemu-devel] [PATCH] Add MIPS ELF loader Dirk Behme
2006-03-28 13:01 ` Thiemo Seufer
2006-03-30 13:40 ` Dirk Behme
2006-03-30 13:53 ` Thiemo Seufer
2006-03-30 14:29 ` Alexander Voropay
2006-03-30 17:34 ` Dirk Behme
[not found] ` <442C0F57.3010200@gmail.com>
2006-04-02 12:54 ` Alexander Voropay
2006-04-23 17:16 ` Fabrice Bellard
2006-04-25 23:57 ` Thiemo Seufer [this message]
[not found] <154e01c66453$111e4f20$e90d11ac@spb.in.rosprint.ru>
2006-04-20 10:16 ` Marius Groeger
2006-04-20 10:28 ` Thiemo Seufer
2006-04-20 11:02 ` Alexander Voropay
2006-04-20 12:19 ` Alexander Voropay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060425235713.GA29550@networkno.de \
--to=ths@networkno.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).