[Qemu-devel] win64

[Qemu-devel] win64

[ZIGLIO, Frediano, VF-IT]

I got windows xp 64 working using current CVS.
I still have problems with network, I had to use this patch

Index: hw/rtl8139.c
===================================================================
RCS file: /sources/qemu/qemu/hw/rtl8139.c,v
retrieving revision 1.1
diff -u -1 -0 -r1.1 rtl8139.c
--- hw/rtl8139.c        5 Feb 2006 04:14:41 -0000       1.1
+++ hw/rtl8139.c        26 Jun 2006 08:44:49 -0000
@@ -2826,21 +2826,21 @@
     d = (PCIRTL8139State *)pci_register_device(bus,
                                               "RTL8139",
sizeof(PCIRTL8139State),
                                               -1,
                                               NULL, NULL);
     pci_conf = d->dev.config;
     pci_conf[0x00] = 0xec; /* Realtek 8139 */
     pci_conf[0x01] = 0x10;
     pci_conf[0x02] = 0x39;
     pci_conf[0x03] = 0x81;
     pci_conf[0x04] = 0x05; /* command = I/O space, Bus Master */
-    pci_conf[0x08] = 0x20; /* 0x10 */ /* PCI revision ID; >=0x20 is for
8139C+ */
+    pci_conf[0x08] = 0x10; /* 0x10 */ /* PCI revision ID; >=0x20 is for
8139C+ */
     pci_conf[0x0a] = 0x00; /* ethernet network controller */
     pci_conf[0x0b] = 0x02;
     pci_conf[0x0e] = 0x00; /* header_type */
     pci_conf[0x3d] = 1;    /* interrupt pin 0 */
     pci_conf[0x34] = 0xdc;

     s = &d->rtl8139;

     /* I/O handler for memory-mapped I/O */
     s->rtl8139_mmio_io_addr =

without it using rtl3139 card windows hangs (it don't have driver for
ne2000). Perhaps it would be helpful to add a rtl8139old card.
With patch all is working however saving state and restoring (after
quitting qemu) cause machine to hangs (mouse do not move, cursors do not
blink, remote desktop give timeout but I can see cpu activity with info
registers).

bye
  Frediano Ziglio

Re: [Qemu-devel] win64

[Fabrice Bellard]

If it works with Linux too then I can change it without leaving the old 
value...

Fabrice.

ZIGLIO, Frediano, VF-IT wrote:
> I got windows xp 64 working using current CVS.
> I still have problems with network, I had to use this patch
> 
> Index: hw/rtl8139.c
> ===================================================================
> RCS file: /sources/qemu/qemu/hw/rtl8139.c,v
> retrieving revision 1.1
> diff -u -1 -0 -r1.1 rtl8139.c
> --- hw/rtl8139.c        5 Feb 2006 04:14:41 -0000       1.1
> +++ hw/rtl8139.c        26 Jun 2006 08:44:49 -0000
> @@ -2826,21 +2826,21 @@
>      d = (PCIRTL8139State *)pci_register_device(bus,
>                                                "RTL8139",
> sizeof(PCIRTL8139State),
>                                                -1,
>                                                NULL, NULL);
>      pci_conf = d->dev.config;
>      pci_conf[0x00] = 0xec; /* Realtek 8139 */
>      pci_conf[0x01] = 0x10;
>      pci_conf[0x02] = 0x39;
>      pci_conf[0x03] = 0x81;
>      pci_conf[0x04] = 0x05; /* command = I/O space, Bus Master */
> -    pci_conf[0x08] = 0x20; /* 0x10 */ /* PCI revision ID; >=0x20 is for
> 8139C+ */
> +    pci_conf[0x08] = 0x10; /* 0x10 */ /* PCI revision ID; >=0x20 is for
> 8139C+ */
>      pci_conf[0x0a] = 0x00; /* ethernet network controller */
>      pci_conf[0x0b] = 0x02;
>      pci_conf[0x0e] = 0x00; /* header_type */
>      pci_conf[0x3d] = 1;    /* interrupt pin 0 */
>      pci_conf[0x34] = 0xdc;
> 
>      s = &d->rtl8139;
> 
>      /* I/O handler for memory-mapped I/O */
>      s->rtl8139_mmio_io_addr =
> 
> without it using rtl3139 card windows hangs (it don't have driver for
> ne2000). Perhaps it would be helpful to add a rtl8139old card.
> With patch all is working however saving state and restoring (after
> quitting qemu) cause machine to hangs (mouse do not move, cursors do not
> blink, remote desktop give timeout but I can see cpu activity with info
> registers).
> 
> bye
>   Frediano Ziglio
> 
> 
> 
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
> 
> 

Re: [Qemu-devel] win64

[yhlu]

win64 as guest?

YH

On 6/26/06, ZIGLIO, Frediano, VF-IT <Frediano.Ziglio@vodafone.com> wrote:
> I got windows xp 64 working using current CVS.
> I still have problems with network, I had to use this patch
>
> Index: hw/rtl8139.c
> ===================================================================
> RCS file: /sources/qemu/qemu/hw/rtl8139.c,v
> retrieving revision 1.1
> diff -u -1 -0 -r1.1 rtl8139.c
> --- hw/rtl8139.c        5 Feb 2006 04:14:41 -0000       1.1
> +++ hw/rtl8139.c        26 Jun 2006 08:44:49 -0000
> @@ -2826,21 +2826,21 @@
>      d = (PCIRTL8139State *)pci_register_device(bus,
>                                                "RTL8139",
> sizeof(PCIRTL8139State),
>                                                -1,
>                                                NULL, NULL);
>      pci_conf = d->dev.config;
>      pci_conf[0x00] = 0xec; /* Realtek 8139 */
>      pci_conf[0x01] = 0x10;
>      pci_conf[0x02] = 0x39;
>      pci_conf[0x03] = 0x81;
>      pci_conf[0x04] = 0x05; /* command = I/O space, Bus Master */
> -    pci_conf[0x08] = 0x20; /* 0x10 */ /* PCI revision ID; >=0x20 is for
> 8139C+ */
> +    pci_conf[0x08] = 0x10; /* 0x10 */ /* PCI revision ID; >=0x20 is for
> 8139C+ */
>      pci_conf[0x0a] = 0x00; /* ethernet network controller */
>      pci_conf[0x0b] = 0x02;
>      pci_conf[0x0e] = 0x00; /* header_type */
>      pci_conf[0x3d] = 1;    /* interrupt pin 0 */
>      pci_conf[0x34] = 0xdc;
>
>      s = &d->rtl8139;
>
>      /* I/O handler for memory-mapped I/O */
>      s->rtl8139_mmio_io_addr =
>
> without it using rtl3139 card windows hangs (it don't have driver for
> ne2000). Perhaps it would be helpful to add a rtl8139old card.
> With patch all is working however saving state and restoring (after
> quitting qemu) cause machine to hangs (mouse do not move, cursors do not
> blink, remote desktop give timeout but I can see cpu activity with info
> registers).
>
> bye
>   Frediano Ziglio
>
>
>
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
>

[Qemu-devel] Simulated devices of Qemu?

[Tieu Ma Dau]

[-- Attachment #1: Type: text/plain, Size: 696 bytes --]

Hi all,
  Qemu can simulate ARM processor with Integrator/CP board and the devices below: Two PL011 UARTs,     SMC 91c111 Ethernet adapter
  1. Generally, how Qemu simulates these devices? It means on Qemu's code  or these devices will be simulated automaticly by "portable dynamic  translation" mechanism of Qemu?
  2. Is Qemu's window (when I execute it on Windows) the screen device simulated by Qemu or it's only the window application on Windows?
  3. How Qemu simulates PL011 UART?
  4. How I must do if I want to develop (add) a device simulated on Qemu
  Thanks.
  Tieu
  
 		
---------------------------------
Do you Yahoo!?
 Get on board. You're invited to try the new Yahoo! Mail Beta.

[-- Attachment #2: Type: text/html, Size: 843 bytes --]

Re: [Qemu-devel] win64

[yhlu]

it works well with "-smp 1", but the "-smp 2" will have blue screen
when it try to get into gui installation window.

Also for 32 bit win, even "-smp 2", there will be only one cpu show up
on the guest win...

YH

On 6/30/06, yhlu <yinghailu@gmail.com> wrote:
> win64 as guest?
>
> YH
>
> On 6/26/06, ZIGLIO, Frediano, VF-IT <Frediano.Ziglio@vodafone.com> wrote:
> > I got windows xp 64 working using current CVS.
> > I still have problems with network, I had to use this patch
> >
> > Index: hw/rtl8139.c
> > ===================================================================
> > RCS file: /sources/qemu/qemu/hw/rtl8139.c,v
> > retrieving revision 1.1
> > diff -u -1 -0 -r1.1 rtl8139.c
> > --- hw/rtl8139.c        5 Feb 2006 04:14:41 -0000       1.1
> > +++ hw/rtl8139.c        26 Jun 2006 08:44:49 -0000
> > @@ -2826,21 +2826,21 @@
> >      d = (PCIRTL8139State *)pci_register_device(bus,
> >                                                "RTL8139",
> > sizeof(PCIRTL8139State),
> >                                                -1,
> >                                                NULL, NULL);
> >      pci_conf = d->dev.config;
> >      pci_conf[0x00] = 0xec; /* Realtek 8139 */
> >      pci_conf[0x01] = 0x10;
> >      pci_conf[0x02] = 0x39;
> >      pci_conf[0x03] = 0x81;
> >      pci_conf[0x04] = 0x05; /* command = I/O space, Bus Master */
> > -    pci_conf[0x08] = 0x20; /* 0x10 */ /* PCI revision ID; >=0x20 is for
> > 8139C+ */
> > +    pci_conf[0x08] = 0x10; /* 0x10 */ /* PCI revision ID; >=0x20 is for
> > 8139C+ */
> >      pci_conf[0x0a] = 0x00; /* ethernet network controller */
> >      pci_conf[0x0b] = 0x02;
> >      pci_conf[0x0e] = 0x00; /* header_type */
> >      pci_conf[0x3d] = 1;    /* interrupt pin 0 */
> >      pci_conf[0x34] = 0xdc;
> >
> >      s = &d->rtl8139;
> >
> >      /* I/O handler for memory-mapped I/O */
> >      s->rtl8139_mmio_io_addr =
> >
> > without it using rtl3139 card windows hangs (it don't have driver for
> > ne2000). Perhaps it would be helpful to add a rtl8139old card.
> > With patch all is working however saving state and restoring (after
> > quitting qemu) cause machine to hangs (mouse do not move, cursors do not
> > blink, remote desktop give timeout but I can see cpu activity with info
> > registers).
> >
> > bye
> >   Frediano Ziglio
> >
> >
> >
> > _______________________________________________
> > Qemu-devel mailing list
> > Qemu-devel@nongnu.org
> > http://lists.nongnu.org/mailman/listinfo/qemu-devel
> >
>