From: Aurelien Jarno <aurelien@aurel32.net>
To: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] qemu-system-sparc question?
Date: Wed, 11 Oct 2006 01:51:26 +0200 [thread overview]
Message-ID: <20061010235125.GA17702@bode.aurel32.net> (raw)
In-Reply-To: <Pine.LNX.4.64.0610101238590.19205@pali.cps.cmich.edu>
On Tue, Oct 10, 2006 at 12:40:53PM -0400, Ishwar Rattan wrote:
>
> Is it possible to boot the iso image
> debian-31r3-sparc-netinst.iso
>
> in qemu-system-sparc? What about other
> Linux distributions?
I haven't tried this one, but the debian-installer from Etch. It is
possible to install a full Debian using it. So my guess is that the
sarge version should also work.
Everything works correctly (I haven't tried X), but after a few hours
(with few being between around 6 and 20 hours), the esp driver from the
kernel crashes, with the following log:
esp0: Aborting command
esp0: dumping state
esp0: dma -- cond_reg<a4000211> addr<f004d000>
esp0: SW [sreg<00> sstep<04> ireg<18>]
esp0: HW reread [sreg<83> sstep<00> ireg<10>]
esp0: current command [tgt<00> lun<00> pphase<DATAOUT> cphase<DATAOUT>]
esp0: disconnected
esp0: Aborting command
esp0: dumping state
esp0: dma -- cond_reg<a4000210> addr<f004d000>
esp0: SW [sreg<00> sstep<04> ireg<18>]
esp0: HW reread [sreg<03> sstep<00> ireg<10>]
esp0: current command [tgt<00> lun<00> pphase<UNISSUED> cphase<UNISSUED>]
esp0: disconnected
esp0: Resetting scsi bus
esp0: SCSI bus reset interrupt
Unable to handle kernel NULL pointer dereference
tsk->{mm,active_mm}->context = 00000054
tsk->{mm,active_mm}->pgd = fc036000
\|/ ____ \|/
"@'/ ,. \`@"
/_| \__/ |_\
\__U_/
ntpd(2981): Oops [#1]
PSR: 04401fc1 PC: fe61eb14 NPC: fe61eb18 Y: 00000000 Not tainted
PC: <esp_do_data_finale+0x374/0x3c0 [esp]>
%G: f00d3998 ffffffff 00000014 fd01a000 00000000 00000001 f1bf6000 00000001
%O: fe620c00 f021baec fd011000 00001556 00000000 f0220c88 f1bf7a78 fe61e7f4
RPC: <esp_do_data_finale+0x54/0x3c0 [esp]>
%L: f3027b60 00000000 00000000 f79cd640 00000000 00000000 f1bf6000 00000001
%I: f3049a70 f7a32380 f316b040 fe620a00 f1bf6000 f0218cc4 f1bf7ae0 fe61f4a4
Caller[fe61f4a4]: esp_work_bus+0x5c/0x6c [esp]
Caller[fe61fd04]: esp_intr+0x1dc/0x300 [esp]
Caller[f0013090]: handler_irq+0x78/0xa4
Caller[f0010b20]: patch_handler_irq+0x0/0x24
Caller[f0191474]: here+0x10/0xa0
Caller[f01919c0]: schedule_timeout+0x18/0xbc
Caller[f007c548]: do_select+0x3d0/0x43c
Caller[f007c788]: core_sys_select+0x1d4/0x288
Caller[f007cc54]: sys_select+0xc8/0x1e8
Caller[f001157c]: syscall_is_too_hard+0x34/0x40
Caller[00019c7c]: 0x19c7c
Instruction DUMP: c2242118 8400a014 c4242114 <c200a010> c2242110 c200a00c c224210c c20e203a 82086007
Kernel panic - not syncing: Aiee, killing interrupt handler!
<0>Press Stop-A (L1-A) to return to the boot prom
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' aurel32@debian.org | aurelien@aurel32.net
`- people.debian.org/~aurel32 | www.aurel32.net
next prev parent reply other threads:[~2006-10-10 23:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-10 16:40 [Qemu-devel] qemu-system-sparc question? Ishwar Rattan
2006-10-10 17:55 ` K. Richard Pixley
2006-10-10 18:59 ` WaxDragon
2006-10-10 19:10 ` Ishwar Rattan
2006-10-10 20:34 ` Blue Swirl
2006-10-10 20:44 ` Ishwar Rattan
2006-10-10 22:00 ` Marco Matthies
2006-10-11 2:39 ` Paul Brook
2006-10-11 12:05 ` Ishwar Rattan
2006-10-11 17:20 ` Blue Swirl
2006-10-11 17:32 ` K. Richard Pixley
2006-10-11 17:32 ` Marco Matthies
2006-10-11 18:04 ` Brian Wheeler
2006-10-11 19:28 ` Johannes Schindelin
2006-10-11 19:38 ` Blue Swirl
2006-10-11 20:02 ` K. Richard Pixley
2006-10-13 22:31 ` Paul Brook
2006-10-14 8:14 ` Blue Swirl
2006-10-14 14:11 ` Paul Brook
2006-10-10 23:51 ` Aurelien Jarno [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-10-11 21:03 Ben Taylor
2006-10-11 22:38 ` Johannes Schindelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20061010235125.GA17702@bode.aurel32.net \
--to=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).