qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: Blue Swirl <blueswir1@hotmail.com>
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH][SPARC] mem_address_not_aligned trap for unaligned PC and load/store
Date: Sun, 1 Apr 2007 22:26:40 +0200	[thread overview]
Message-ID: <20070401202639.GA6871@amd64.aurel32.net> (raw)
In-Reply-To: <460FEC40.60001@aurel32.net>

On Sun, Apr 01, 2007 at 07:30:40PM +0200, Aurelien Jarno wrote:
> Blue Swirl a écrit :
> >> According to the SPARCv8 and SPARCv9 manuals, the jmpl, rett and return
> >> instructions should generate a mem_address_not_aligned trap if either
> >> of the low-order two bits of the target address is nonzero.
> > 
> > This is true, but in that case alignment should be enforced for loads ands 
> > stores as well. The checks also incur a performance penalty for little 
> > advantage. Maybe the checks should be enabled only with a compile/run-time 
> > option.
> > 
> 
> I also have a patch for load/store, but openbios is doing a few
> unaligned memory accesses, so the patch can't be used until openbios is
> fixed.
> 

I have finally been able to found and fix the bug in openbios. I have
send a patch to the openbios mailing list. The patch and the fixed bios
is available on http://temp.aurel32.net .

The patch below is for QEMU and implements mem_address_not_aligned for 
unaligned PC (jmpl, rett and return instructions) and for load/store
operations.

I will try to do some benchmarks about the performance penality, but I
think it is very small. The patch basically adds 2 or 3 host assembly
instructions for each load/store, jmpl, rett or return instruction.


Index: target-sparc/cpu.h
===================================================================
RCS file: /sources/qemu/qemu/target-sparc/cpu.h,v
retrieving revision 1.32
diff -u -d -p -r1.32 cpu.h
--- target-sparc/cpu.h	1 Apr 2007 15:15:36 -0000	1.32
+++ target-sparc/cpu.h	1 Apr 2007 19:26:57 -0000
@@ -35,6 +35,7 @@
 #define TT_NFPU_INSN 0x04
 #define TT_WIN_OVF  0x05
 #define TT_WIN_UNF  0x06 
+#define TT_UNALIGNED 0x07 
 #define TT_FP_EXCP  0x08
 #define TT_DFAULT   0x09
 #define TT_TOVF     0x0a
@@ -55,6 +56,7 @@
 #define TT_DFAULT   0x30
 #define TT_DMISS    0x31
 #define TT_DPROT    0x32
+#define TT_UNALIGNED 0x34
 #define TT_PRIV_ACT 0x37
 #define TT_EXTINT   0x40
 #define TT_SPILL    0x80
Index: target-sparc/op.c
===================================================================
RCS file: /sources/qemu/qemu/target-sparc/op.c,v
retrieving revision 1.27
diff -u -d -p -r1.27 op.c
--- target-sparc/op.c	1 Apr 2007 15:38:17 -0000	1.27
+++ target-sparc/op.c	1 Apr 2007 19:26:57 -0000
@@ -1486,7 +1486,10 @@ void OPPROTO op_movl_npc_im(void)
 
 void OPPROTO op_movl_npc_T0(void)
 {
-    env->npc = T0;
+    if (T0 & 0x3)
+	raise_exception(TT_UNALIGNED);
+    else
+	env->npc = T0;
 }
 
 void OPPROTO op_mov_pc_npc(void)
Index: target-sparc/op_helper.c
===================================================================
RCS file: /sources/qemu/qemu/target-sparc/op_helper.c,v
retrieving revision 1.23
diff -u -d -p -r1.23 op_helper.c
--- target-sparc/op_helper.c	1 Apr 2007 15:15:36 -0000	1.23
+++ target-sparc/op_helper.c	1 Apr 2007 19:26:57 -0000
@@ -872,7 +872,10 @@ void do_interrupt(int intno)
 
 #if !defined(CONFIG_USER_ONLY) 
 
+static void do_unaligned_access (target_ulong addr, int is_write, int is_user, void *retaddr);
+
 #define MMUSUFFIX _mmu
+#define ALIGNED_ONLY
 #define GETPC() (__builtin_return_address(0))
 
 #define SHIFT 0
@@ -887,6 +890,11 @@ void do_interrupt(int intno)
 #define SHIFT 3
 #include "softmmu_template.h"
 
+static void do_unaligned_access (target_ulong addr, int is_write, int is_user, void *retaddr)
+{
+	/* Comment the following line to disable mem_address_not_aligned traps */
+	raise_exception(TT_UNALIGNED);
+}
 
 /* try to fill the TLB and return an exception if error. If retaddr is
    NULL, it means that the function was called in C code (i.e. not
Index: target-sparc/translate.c
===================================================================
RCS file: /sources/qemu/qemu/target-sparc/translate.c,v
retrieving revision 1.44
diff -u -d -p -r1.44 translate.c
--- target-sparc/translate.c	1 Apr 2007 16:23:36 -0000	1.44
+++ target-sparc/translate.c	1 Apr 2007 19:26:57 -0000
@@ -25,7 +25,6 @@
    Rest of V9 instructions, VIS instructions
    NPC/PC static optimisations (use JUMP_TB when possible)
    Optimize synthetic instructions
-   Optional alignment check
    128-bit float
 */

-- 
  .''`.  Aurelien Jarno	            | GPG: 1024D/F1BCDB73
 : :' :  Debian developer           | Electrical Engineer
 `. `'   aurel32@debian.org         | aurelien@aurel32.net
   `-    people.debian.org/~aurel32 | www.aurel32.net

      reply	other threads:[~2007-04-01 20:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-01 17:02 [Qemu-devel] [PATCH][SPARC] mem_address_not_aligned trap for unaligned PC Aurelien Jarno
2007-04-01 17:15 ` [Qemu-devel] [PATCH][SPARC] mem_address_not_aligned trap forunaligned PC Blue Swirl
2007-04-01 17:30   ` [Qemu-devel] [PATCH][SPARC] mem_address_not_aligned trap for unaligned PC Aurelien Jarno
2007-04-01 20:26     ` Aurelien Jarno [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070401202639.GA6871@amd64.aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=blueswir1@hotmail.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).