qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Edgar E. Iglesias" <edgar.iglesias@axis.com>
To: Fabrice Bellard <fabrice@bellard.org>
Cc: edgar.iglesias@gmail.com, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [4352] Make sure we flush cached blocks from the tb-jmp-cache when we replace valid tlb entries .
Date: Sat, 24 May 2008 20:01:49 +0200	[thread overview]
Message-ID: <20080524180149.GA29484@edgar.se.axis.com> (raw)
In-Reply-To: <483753C9.2030009@bellard.org>

On Sat, May 24, 2008 at 01:31:21AM +0200, Fabrice Bellard wrote:
> Please revert this patch: it has a major performance hit because the
> tb_jmp_cache is flushed too often. Flushing the tb_jmp_cache when
> overriding a tlb_cache entry is not necessary, provided a given virtual
> address is always remapped at the same physical address with the same
> rights, which is the assumed API here. Detecting possible
> inconsistencies is useful, but I am sure there is a solution without
> such a performance hit.
> 
> Please avoid doing such modifications without doing regressions tests on
> performance (e.g. a compilation with gcc).


My misstake, unfortunately I only ran performance tests on CRIS. That flush 
was needed at the time in order to avoid a complete tlb_flush() every time the 
guest touched the TLB. IIRC those changes improved performance and got rid of 
bugs were TBs got executed even if their addresses were not in the TLB.

The flush might not be needed once the tb jump cache hash function got fixed,
but I havent had time to verify that.               

Thanks for clarifying the API.

Best regards

> 
> Regards,
> 
> Fabrice.
> 
> Edgar E. Iglesias wrote:
> > Revision: 4352
> >           http://svn.sv.gnu.org/viewvc/?view=rev&root=qemu&revision=4352
> > Author:   edgar_igl
> > Date:     2008-05-06 08:44:21 +0000 (Tue, 06 May 2008)
> > 
> > Log Message:
> > -----------
> > Make sure we flush cached blocks from the tb-jmp-cache when we replace valid tlb entries.
> > 
> > Modified Paths:
> > --------------
> >     trunk/exec.c
> > 
> > Modified: trunk/exec.c
> > ===================================================================
> > --- trunk/exec.c	2008-05-06 08:38:22 UTC (rev 4351)
> > +++ trunk/exec.c	2008-05-06 08:44:21 UTC (rev 4352)
> > @@ -1366,6 +1366,21 @@
> >  
> >  #if !defined(CONFIG_USER_ONLY)
> >  
> > +static inline void tlb_flush_jmp_cache(CPUState *env, target_ulong addr)
> > +{
> > +    unsigned int i;
> > +
> > +    /* Discard jump cache entries for any tb which might potentially
> > +       overlap the flushed page.  */
> > +    i = tb_jmp_cache_hash_page(addr - TARGET_PAGE_SIZE);
> > +    memset (&env->tb_jmp_cache[i], 0, 
> > +	    TB_JMP_PAGE_SIZE * sizeof(TranslationBlock *));
> > +
> > +    i = tb_jmp_cache_hash_page(addr);
> > +    memset (&env->tb_jmp_cache[i], 0, 
> > +	    TB_JMP_PAGE_SIZE * sizeof(TranslationBlock *));
> > +}
> > +
> >  /* NOTE: if flush_global is true, also flush global entries (not
> >     implemented yet) */
> >  void tlb_flush(CPUState *env, int flush_global)
> > @@ -1428,7 +1443,6 @@
> >  void tlb_flush_page(CPUState *env, target_ulong addr)
> >  {
> >      int i;
> > -    TranslationBlock *tb;
> >  
> >  #if defined(DEBUG_TLB)
> >      printf("tlb_flush_page: " TARGET_FMT_lx "\n", addr);
> > @@ -1448,14 +1462,8 @@
> >  #endif
> >  #endif
> >  
> > -    /* Discard jump cache entries for any tb which might potentially
> > -       overlap the flushed page.  */
> > -    i = tb_jmp_cache_hash_page(addr - TARGET_PAGE_SIZE);
> > -    memset (&env->tb_jmp_cache[i], 0, TB_JMP_PAGE_SIZE * sizeof(tb));
> > +    tlb_flush_jmp_cache(env, addr);
> >  
> > -    i = tb_jmp_cache_hash_page(addr);
> > -    memset (&env->tb_jmp_cache[i], 0, TB_JMP_PAGE_SIZE * sizeof(tb));
> > -
> >  #if !defined(CONFIG_SOFTMMU)
> >      if (addr < MMAP_AREA_END)
> >          munmap((void *)addr, TARGET_PAGE_SIZE);
> > @@ -1706,6 +1714,10 @@
> >          } else {
> >              te->addr_read = -1;
> >          }
> > +
> > +        if (te->addr_code != -1) {
> > +            tlb_flush_jmp_cache(env, te->addr_code);
> > +        }
> >          if (prot & PAGE_EXEC) {
> >              te->addr_code = address;
> >          } else {
> > 
> > 
> > 
> > 
> > 
> 
> 

-- 
Edgar E. Iglesias
Axis Communications AB

      reply	other threads:[~2008-05-24 16:01 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-06  8:44 [Qemu-devel] [4352] Make sure we flush cached blocks from the tb-jmp-cache when we replace valid tlb entries Edgar E. Iglesias
2008-05-23 23:31 ` Fabrice Bellard
2008-05-24 18:01   ` Edgar E. Iglesias [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080524180149.GA29484@edgar.se.axis.com \
    --to=edgar.iglesias@axis.com \
    --cc=edgar.iglesias@gmail.com \
    --cc=fabrice@bellard.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).