[Qemu-devel] [patch 03/14] qemu: per-arch cpu_has_work

[mtosatti@redhat.com]

[-- Attachment #1: qemu-arch-has-work --]
[-- Type: text/plain, Size: 6889 bytes --]

Blue Swirl: fix Sparc32 breakage

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

Index: qemu/target-alpha/exec.h
===================================================================
--- qemu.orig/target-alpha/exec.h
+++ qemu/target-alpha/exec.h
@@ -48,10 +48,15 @@ static always_inline void regs_to_env(vo
 {
 }
 
+static always_inline int cpu_has_work(CPUState *env)
+{
+    return (env->interrupt_request & CPU_INTERRUPT_HARD);
+}
+
 static always_inline int cpu_halted(CPUState *env) {
     if (!env->halted)
         return 0;
-    if (env->interrupt_request & CPU_INTERRUPT_HARD) {
+    if (cpu_has_work(env)) {
         env->halted = 0;
         return 0;
     }
Index: qemu/target-i386/exec.h
===================================================================
--- qemu.orig/target-i386/exec.h
+++ qemu/target-i386/exec.h
@@ -338,14 +338,23 @@ static inline void regs_to_env(void)
 #endif
 }
 
+static inline int cpu_has_work(CPUState *env)
+{
+    int work;
+
+    work = (env->interrupt_request & CPU_INTERRUPT_HARD) &&
+           (env->eflags & IF_MASK);
+    work |= env->interrupt_request & CPU_INTERRUPT_NMI;
+
+    return work;
+}
+
 static inline int cpu_halted(CPUState *env) {
     /* handle exit of HALTED state */
     if (!env->halted)
         return 0;
     /* disable halt condition */
-    if (((env->interrupt_request & CPU_INTERRUPT_HARD) &&
-         (env->eflags & IF_MASK)) ||
-        (env->interrupt_request & CPU_INTERRUPT_NMI)) {
+    if (cpu_has_work(env)) {
         env->halted = 0;
         return 0;
     }
Index: qemu/cpu-all.h
===================================================================
--- qemu.orig/cpu-all.h
+++ qemu/cpu-all.h
@@ -775,6 +775,8 @@ void cpu_reset_interrupt(CPUState *env, 
 
 void cpu_exit(CPUState *s);
 
+int qemu_cpu_has_work(CPUState *env);
+
 /* Breakpoint/watchpoint flags */
 #define BP_MEM_READ           0x01
 #define BP_MEM_WRITE          0x02
Index: qemu/cpu-exec.c
===================================================================
--- qemu.orig/cpu-exec.c
+++ qemu/cpu-exec.c
@@ -50,6 +50,11 @@ int tb_invalidated_flag;
 //#define DEBUG_EXEC
 //#define DEBUG_SIGNAL
 
+int qemu_cpu_has_work(CPUState *env)
+{
+    return cpu_has_work(env);
+}
+
 void cpu_loop_exit(void)
 {
     /* NOTE: the register at this point must be saved by hand because
Index: qemu/target-arm/exec.h
===================================================================
--- qemu.orig/target-arm/exec.h
+++ qemu/target-arm/exec.h
@@ -37,14 +37,19 @@ static inline void regs_to_env(void)
 {
 }
 
+static inline int cpu_has_work(CPUState *env)
+{
+    return (env->interrupt_request &
+            (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD | CPU_INTERRUPT_EXITTB));
+}
+
 static inline int cpu_halted(CPUState *env) {
     if (!env->halted)
         return 0;
     /* An interrupt wakes the CPU even if the I and F CPSR bits are
        set.  We use EXITTB to silently wake CPU without causing an
        actual interrupt.  */
-    if (env->interrupt_request &
-        (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD | CPU_INTERRUPT_EXITTB)) {
+    if (cpu_has_work(env)) {
         env->halted = 0;
         return 0;
     }
Index: qemu/target-cris/exec.h
===================================================================
--- qemu.orig/target-cris/exec.h
+++ qemu/target-cris/exec.h
@@ -40,6 +40,11 @@ static inline void regs_to_env(void)
 void cpu_cris_flush_flags(CPUCRISState *env, int cc_op);
 void helper_movec(CPUCRISState *env, int reg, uint32_t val);
 
+static inline int cpu_has_work(CPUState *env)
+{
+    return (env->interrupt_request & (CPU_INTERRUPT_HARD | CPU_INTERRUPT_NMI));
+}
+
 static inline int cpu_halted(CPUState *env) {
 	if (!env->halted)
 		return 0;
Index: qemu/target-m68k/exec.h
===================================================================
--- qemu.orig/target-m68k/exec.h
+++ qemu/target-m68k/exec.h
@@ -41,10 +41,15 @@ static inline void regs_to_env(void)
 #include "softmmu_exec.h"
 #endif
 
+static inline int cpu_has_work(CPUState *env)
+{
+    return (env->interrupt_request & (CPU_INTERRUPT_HARD));
+}
+
 static inline int cpu_halted(CPUState *env) {
     if (!env->halted)
         return 0;
-    if (env->interrupt_request & CPU_INTERRUPT_HARD) {
+    if (cpu_has_work(env)) {
         env->halted = 0;
         return 0;
     }
Index: qemu/target-mips/exec.h
===================================================================
--- qemu.orig/target-mips/exec.h
+++ qemu/target-mips/exec.h
@@ -33,12 +33,18 @@ static inline void regs_to_env(void)
 {
 }
 
+static inline int cpu_has_work(CPUState *env)
+{
+    return (env->interrupt_request &
+            (CPU_INTERRUPT_HARD | CPU_INTERRUPT_TIMER));
+}
+
+
 static inline int cpu_halted(CPUState *env)
 {
     if (!env->halted)
         return 0;
-    if (env->interrupt_request &
-        (CPU_INTERRUPT_HARD | CPU_INTERRUPT_TIMER)) {
+    if (cpu_has_work(env)) {
         env->halted = 0;
         return 0;
     }
Index: qemu/target-ppc/exec.h
===================================================================
--- qemu.orig/target-ppc/exec.h
+++ qemu/target-ppc/exec.h
@@ -44,11 +44,17 @@ static always_inline void regs_to_env (v
 {
 }
 
+static always_inline int cpu_has_work(CPUState *env)
+{
+    return (msr_ee && (env->interrupt_request & CPU_INTERRUPT_HARD));
+}
+
+
 static always_inline int cpu_halted (CPUState *env)
 {
     if (!env->halted)
         return 0;
-    if (msr_ee && (env->interrupt_request & CPU_INTERRUPT_HARD)) {
+    if (cpu_has_work(env)) {
         env->halted = 0;
         return 0;
     }
Index: qemu/target-sh4/exec.h
===================================================================
--- qemu.orig/target-sh4/exec.h
+++ qemu/target-sh4/exec.h
@@ -28,10 +28,15 @@ register struct CPUSH4State *env asm(ARE
 #include "cpu.h"
 #include "exec-all.h"
 
+static inline int cpu_has_work(CPUState *env)
+{
+    return (env->interrupt_request & CPU_INTERRUPT_HARD);
+}
+
 static inline int cpu_halted(CPUState *env) {
     if (!env->halted)
         return 0;
-    if (env->interrupt_request & CPU_INTERRUPT_HARD) {
+    if (cpu_has_work(env)) {
         env->halted = 0;
         env->intr_at_halt = 1;
         return 0;
Index: qemu/target-sparc/exec.h
===================================================================
--- qemu.orig/target-sparc/exec.h
+++ qemu/target-sparc/exec.h
@@ -24,10 +24,17 @@ static inline void regs_to_env(void)
 /* op_helper.c */
 void do_interrupt(CPUState *env);
 
+static inline int cpu_has_work(CPUState *env1)
+{
+    return (env1->interrupt_request & CPU_INTERRUPT_HARD) &&
+           (env1->psret != 0);
+}
+
+
 static inline int cpu_halted(CPUState *env1) {
     if (!env1->halted)
         return 0;
-    if ((env1->interrupt_request & CPU_INTERRUPT_HARD) && (env1->psret != 0)) {
+    if (cpu_has_work(env1)) {
         env1->halted = 0;
         return 0;
     }

--