* [Qemu-devel] [PATCH] sh: sm501: Eliminates TABs from sm501 related files
@ 2009-04-26 11:41 Shin-ichiro KAWASAKI
2009-04-26 11:54 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 2+ messages in thread
From: Shin-ichiro KAWASAKI @ 2009-04-26 11:41 UTC (permalink / raw)
To: qemu-devel
This patch simply removes TABs from 'sm501.c' and 'sm501_template.h',
to be more consistent with CODING_STYLE.
Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Index: trunk/hw/sm501.c
===================================================================
--- trunk/hw/sm501.c (revision 7190)
+++ trunk/hw/sm501.c (working copy)
@@ -59,391 +59,391 @@
/* System Configuration area */
/* System config base */
-#define SM501_SYS_CONFIG (0x000000)
+#define SM501_SYS_CONFIG (0x000000)
/* config 1 */
-#define SM501_SYSTEM_CONTROL (0x000000)
+#define SM501_SYSTEM_CONTROL (0x000000)
-#define SM501_SYSCTRL_PANEL_TRISTATE (1<<0)
-#define SM501_SYSCTRL_MEM_TRISTATE (1<<1)
-#define SM501_SYSCTRL_CRT_TRISTATE (1<<2)
+#define SM501_SYSCTRL_PANEL_TRISTATE (1<<0)
+#define SM501_SYSCTRL_MEM_TRISTATE (1<<1)
+#define SM501_SYSCTRL_CRT_TRISTATE (1<<2)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2<<4)
-#define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2<<4)
+#define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3<<4)
-#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1<<6)
-#define SM501_SYSCTRL_PCI_RETRY_DISABLE (1<<7)
-#define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1<<11)
-#define SM501_SYSCTRL_PCI_BURST_READ_EN (1<<15)
+#define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1<<6)
+#define SM501_SYSCTRL_PCI_RETRY_DISABLE (1<<7)
+#define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1<<11)
+#define SM501_SYSCTRL_PCI_BURST_READ_EN (1<<15)
/* miscellaneous control */
-#define SM501_MISC_CONTROL (0x000004)
+#define SM501_MISC_CONTROL (0x000004)
-#define SM501_MISC_BUS_SH (0x0)
-#define SM501_MISC_BUS_PCI (0x1)
-#define SM501_MISC_BUS_XSCALE (0x2)
-#define SM501_MISC_BUS_NEC (0x6)
-#define SM501_MISC_BUS_MASK (0x7)
+#define SM501_MISC_BUS_SH (0x0)
+#define SM501_MISC_BUS_PCI (0x1)
+#define SM501_MISC_BUS_XSCALE (0x2)
+#define SM501_MISC_BUS_NEC (0x6)
+#define SM501_MISC_BUS_MASK (0x7)
-#define SM501_MISC_VR_62MB (1<<3)
-#define SM501_MISC_CDR_RESET (1<<7)
-#define SM501_MISC_USB_LB (1<<8)
-#define SM501_MISC_USB_SLAVE (1<<9)
-#define SM501_MISC_BL_1 (1<<10)
-#define SM501_MISC_MC (1<<11)
-#define SM501_MISC_DAC_POWER (1<<12)
-#define SM501_MISC_IRQ_INVERT (1<<16)
-#define SM501_MISC_SH (1<<17)
+#define SM501_MISC_VR_62MB (1<<3)
+#define SM501_MISC_CDR_RESET (1<<7)
+#define SM501_MISC_USB_LB (1<<8)
+#define SM501_MISC_USB_SLAVE (1<<9)
+#define SM501_MISC_BL_1 (1<<10)
+#define SM501_MISC_MC (1<<11)
+#define SM501_MISC_DAC_POWER (1<<12)
+#define SM501_MISC_IRQ_INVERT (1<<16)
+#define SM501_MISC_SH (1<<17)
-#define SM501_MISC_HOLD_EMPTY (0<<18)
-#define SM501_MISC_HOLD_8 (1<<18)
-#define SM501_MISC_HOLD_16 (2<<18)
-#define SM501_MISC_HOLD_24 (3<<18)
-#define SM501_MISC_HOLD_32 (4<<18)
-#define SM501_MISC_HOLD_MASK (7<<18)
+#define SM501_MISC_HOLD_EMPTY (0<<18)
+#define SM501_MISC_HOLD_8 (1<<18)
+#define SM501_MISC_HOLD_16 (2<<18)
+#define SM501_MISC_HOLD_24 (3<<18)
+#define SM501_MISC_HOLD_32 (4<<18)
+#define SM501_MISC_HOLD_MASK (7<<18)
-#define SM501_MISC_FREQ_12 (1<<24)
-#define SM501_MISC_PNL_24BIT (1<<25)
-#define SM501_MISC_8051_LE (1<<26)
+#define SM501_MISC_FREQ_12 (1<<24)
+#define SM501_MISC_PNL_24BIT (1<<25)
+#define SM501_MISC_8051_LE (1<<26)
-#define SM501_GPIO31_0_CONTROL (0x000008)
-#define SM501_GPIO63_32_CONTROL (0x00000C)
-#define SM501_DRAM_CONTROL (0x000010)
+#define SM501_GPIO31_0_CONTROL (0x000008)
+#define SM501_GPIO63_32_CONTROL (0x00000C)
+#define SM501_DRAM_CONTROL (0x000010)
/* command list */
-#define SM501_ARBTRTN_CONTROL (0x000014)
+#define SM501_ARBTRTN_CONTROL (0x000014)
/* command list */
-#define SM501_COMMAND_LIST_STATUS (0x000024)
+#define SM501_COMMAND_LIST_STATUS (0x000024)
/* interrupt debug */
-#define SM501_RAW_IRQ_STATUS (0x000028)
-#define SM501_RAW_IRQ_CLEAR (0x000028)
-#define SM501_IRQ_STATUS (0x00002C)
-#define SM501_IRQ_MASK (0x000030)
-#define SM501_DEBUG_CONTROL (0x000034)
+#define SM501_RAW_IRQ_STATUS (0x000028)
+#define SM501_RAW_IRQ_CLEAR (0x000028)
+#define SM501_IRQ_STATUS (0x00002C)
+#define SM501_IRQ_MASK (0x000030)
+#define SM501_DEBUG_CONTROL (0x000034)
/* power management */
-#define SM501_POWERMODE_P2X_SRC (1<<29)
-#define SM501_POWERMODE_V2X_SRC (1<<20)
-#define SM501_POWERMODE_M_SRC (1<<12)
-#define SM501_POWERMODE_M1_SRC (1<<4)
+#define SM501_POWERMODE_P2X_SRC (1<<29)
+#define SM501_POWERMODE_V2X_SRC (1<<20)
+#define SM501_POWERMODE_M_SRC (1<<12)
+#define SM501_POWERMODE_M1_SRC (1<<4)
-#define SM501_CURRENT_GATE (0x000038)
-#define SM501_CURRENT_CLOCK (0x00003C)
-#define SM501_POWER_MODE_0_GATE (0x000040)
-#define SM501_POWER_MODE_0_CLOCK (0x000044)
-#define SM501_POWER_MODE_1_GATE (0x000048)
-#define SM501_POWER_MODE_1_CLOCK (0x00004C)
-#define SM501_SLEEP_MODE_GATE (0x000050)
-#define SM501_POWER_MODE_CONTROL (0x000054)
+#define SM501_CURRENT_GATE (0x000038)
+#define SM501_CURRENT_CLOCK (0x00003C)
+#define SM501_POWER_MODE_0_GATE (0x000040)
+#define SM501_POWER_MODE_0_CLOCK (0x000044)
+#define SM501_POWER_MODE_1_GATE (0x000048)
+#define SM501_POWER_MODE_1_CLOCK (0x00004C)
+#define SM501_SLEEP_MODE_GATE (0x000050)
+#define SM501_POWER_MODE_CONTROL (0x000054)
/* power gates for units within the 501 */
-#define SM501_GATE_HOST (0)
-#define SM501_GATE_MEMORY (1)
-#define SM501_GATE_DISPLAY (2)
-#define SM501_GATE_2D_ENGINE (3)
-#define SM501_GATE_CSC (4)
-#define SM501_GATE_ZVPORT (5)
-#define SM501_GATE_GPIO (6)
-#define SM501_GATE_UART0 (7)
-#define SM501_GATE_UART1 (8)
-#define SM501_GATE_SSP (10)
-#define SM501_GATE_USB_HOST (11)
-#define SM501_GATE_USB_GADGET (12)
-#define SM501_GATE_UCONTROLLER (17)
-#define SM501_GATE_AC97 (18)
+#define SM501_GATE_HOST (0)
+#define SM501_GATE_MEMORY (1)
+#define SM501_GATE_DISPLAY (2)
+#define SM501_GATE_2D_ENGINE (3)
+#define SM501_GATE_CSC (4)
+#define SM501_GATE_ZVPORT (5)
+#define SM501_GATE_GPIO (6)
+#define SM501_GATE_UART0 (7)
+#define SM501_GATE_UART1 (8)
+#define SM501_GATE_SSP (10)
+#define SM501_GATE_USB_HOST (11)
+#define SM501_GATE_USB_GADGET (12)
+#define SM501_GATE_UCONTROLLER (17)
+#define SM501_GATE_AC97 (18)
/* panel clock */
-#define SM501_CLOCK_P2XCLK (24)
+#define SM501_CLOCK_P2XCLK (24)
/* crt clock */
-#define SM501_CLOCK_V2XCLK (16)
+#define SM501_CLOCK_V2XCLK (16)
/* main clock */
-#define SM501_CLOCK_MCLK (8)
+#define SM501_CLOCK_MCLK (8)
/* SDRAM controller clock */
-#define SM501_CLOCK_M1XCLK (0)
+#define SM501_CLOCK_M1XCLK (0)
/* config 2 */
-#define SM501_PCI_MASTER_BASE (0x000058)
-#define SM501_ENDIAN_CONTROL (0x00005C)
-#define SM501_DEVICEID (0x000060)
+#define SM501_PCI_MASTER_BASE (0x000058)
+#define SM501_ENDIAN_CONTROL (0x00005C)
+#define SM501_DEVICEID (0x000060)
/* 0x050100A0 */
-#define SM501_DEVICEID_SM501 (0x05010000)
-#define SM501_DEVICEID_IDMASK (0xffff0000)
-#define SM501_DEVICEID_REVMASK (0x000000ff)
+#define SM501_DEVICEID_SM501 (0x05010000)
+#define SM501_DEVICEID_IDMASK (0xffff0000)
+#define SM501_DEVICEID_REVMASK (0x000000ff)
-#define SM501_PLLCLOCK_COUNT (0x000064)
-#define SM501_MISC_TIMING (0x000068)
-#define SM501_CURRENT_SDRAM_CLOCK (0x00006C)
+#define SM501_PLLCLOCK_COUNT (0x000064)
+#define SM501_MISC_TIMING (0x000068)
+#define SM501_CURRENT_SDRAM_CLOCK (0x00006C)
-#define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074)
+#define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074)
/* GPIO base */
-#define SM501_GPIO (0x010000)
-#define SM501_GPIO_DATA_LOW (0x00)
-#define SM501_GPIO_DATA_HIGH (0x04)
-#define SM501_GPIO_DDR_LOW (0x08)
-#define SM501_GPIO_DDR_HIGH (0x0C)
-#define SM501_GPIO_IRQ_SETUP (0x10)
-#define SM501_GPIO_IRQ_STATUS (0x14)
-#define SM501_GPIO_IRQ_RESET (0x14)
+#define SM501_GPIO (0x010000)
+#define SM501_GPIO_DATA_LOW (0x00)
+#define SM501_GPIO_DATA_HIGH (0x04)
+#define SM501_GPIO_DDR_LOW (0x08)
+#define SM501_GPIO_DDR_HIGH (0x0C)
+#define SM501_GPIO_IRQ_SETUP (0x10)
+#define SM501_GPIO_IRQ_STATUS (0x14)
+#define SM501_GPIO_IRQ_RESET (0x14)
/* I2C controller base */
-#define SM501_I2C (0x010040)
-#define SM501_I2C_BYTE_COUNT (0x00)
-#define SM501_I2C_CONTROL (0x01)
-#define SM501_I2C_STATUS (0x02)
-#define SM501_I2C_RESET (0x02)
-#define SM501_I2C_SLAVE_ADDRESS (0x03)
-#define SM501_I2C_DATA (0x04)
+#define SM501_I2C (0x010040)
+#define SM501_I2C_BYTE_COUNT (0x00)
+#define SM501_I2C_CONTROL (0x01)
+#define SM501_I2C_STATUS (0x02)
+#define SM501_I2C_RESET (0x02)
+#define SM501_I2C_SLAVE_ADDRESS (0x03)
+#define SM501_I2C_DATA (0x04)
/* SSP base */
-#define SM501_SSP (0x020000)
+#define SM501_SSP (0x020000)
/* Uart 0 base */
-#define SM501_UART0 (0x030000)
+#define SM501_UART0 (0x030000)
/* Uart 1 base */
-#define SM501_UART1 (0x030020)
+#define SM501_UART1 (0x030020)
/* USB host port base */
-#define SM501_USB_HOST (0x040000)
+#define SM501_USB_HOST (0x040000)
/* USB slave/gadget base */
-#define SM501_USB_GADGET (0x060000)
+#define SM501_USB_GADGET (0x060000)
/* USB slave/gadget data port base */
-#define SM501_USB_GADGET_DATA (0x070000)
+#define SM501_USB_GADGET_DATA (0x070000)
/* Display controller/video engine base */
-#define SM501_DC (0x080000)
+#define SM501_DC (0x080000)
/* common defines for the SM501 address registers */
-#define SM501_ADDR_FLIP (1<<31)
-#define SM501_ADDR_EXT (1<<27)
-#define SM501_ADDR_CS1 (1<<26)
-#define SM501_ADDR_MASK (0x3f << 26)
+#define SM501_ADDR_FLIP (1<<31)
+#define SM501_ADDR_EXT (1<<27)
+#define SM501_ADDR_CS1 (1<<26)
+#define SM501_ADDR_MASK (0x3f << 26)
-#define SM501_FIFO_MASK (0x3 << 16)
-#define SM501_FIFO_1 (0x0 << 16)
-#define SM501_FIFO_3 (0x1 << 16)
-#define SM501_FIFO_7 (0x2 << 16)
-#define SM501_FIFO_11 (0x3 << 16)
+#define SM501_FIFO_MASK (0x3 << 16)
+#define SM501_FIFO_1 (0x0 << 16)
+#define SM501_FIFO_3 (0x1 << 16)
+#define SM501_FIFO_7 (0x2 << 16)
+#define SM501_FIFO_11 (0x3 << 16)
/* common registers for panel and the crt */
-#define SM501_OFF_DC_H_TOT (0x000)
-#define SM501_OFF_DC_V_TOT (0x008)
-#define SM501_OFF_DC_H_SYNC (0x004)
-#define SM501_OFF_DC_V_SYNC (0x00C)
+#define SM501_OFF_DC_H_TOT (0x000)
+#define SM501_OFF_DC_V_TOT (0x008)
+#define SM501_OFF_DC_H_SYNC (0x004)
+#define SM501_OFF_DC_V_SYNC (0x00C)
-#define SM501_DC_PANEL_CONTROL (0x000)
+#define SM501_DC_PANEL_CONTROL (0x000)
-#define SM501_DC_PANEL_CONTROL_FPEN (1<<27)
-#define SM501_DC_PANEL_CONTROL_BIAS (1<<26)
-#define SM501_DC_PANEL_CONTROL_DATA (1<<25)
-#define SM501_DC_PANEL_CONTROL_VDD (1<<24)
-#define SM501_DC_PANEL_CONTROL_DP (1<<23)
+#define SM501_DC_PANEL_CONTROL_FPEN (1<<27)
+#define SM501_DC_PANEL_CONTROL_BIAS (1<<26)
+#define SM501_DC_PANEL_CONTROL_DATA (1<<25)
+#define SM501_DC_PANEL_CONTROL_VDD (1<<24)
+#define SM501_DC_PANEL_CONTROL_DP (1<<23)
-#define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21)
-#define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21)
-#define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21)
+#define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21)
-#define SM501_DC_PANEL_CONTROL_DE (1<<20)
+#define SM501_DC_PANEL_CONTROL_DE (1<<20)
-#define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18)
-#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18)
-#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18)
+#define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
-#define SM501_DC_PANEL_CONTROL_CP (1<<14)
-#define SM501_DC_PANEL_CONTROL_VSP (1<<13)
-#define SM501_DC_PANEL_CONTROL_HSP (1<<12)
-#define SM501_DC_PANEL_CONTROL_CK (1<<9)
-#define SM501_DC_PANEL_CONTROL_TE (1<<8)
-#define SM501_DC_PANEL_CONTROL_VPD (1<<7)
-#define SM501_DC_PANEL_CONTROL_VP (1<<6)
-#define SM501_DC_PANEL_CONTROL_HPD (1<<5)
-#define SM501_DC_PANEL_CONTROL_HP (1<<4)
-#define SM501_DC_PANEL_CONTROL_GAMMA (1<<3)
-#define SM501_DC_PANEL_CONTROL_EN (1<<2)
+#define SM501_DC_PANEL_CONTROL_CP (1<<14)
+#define SM501_DC_PANEL_CONTROL_VSP (1<<13)
+#define SM501_DC_PANEL_CONTROL_HSP (1<<12)
+#define SM501_DC_PANEL_CONTROL_CK (1<<9)
+#define SM501_DC_PANEL_CONTROL_TE (1<<8)
+#define SM501_DC_PANEL_CONTROL_VPD (1<<7)
+#define SM501_DC_PANEL_CONTROL_VP (1<<6)
+#define SM501_DC_PANEL_CONTROL_HPD (1<<5)
+#define SM501_DC_PANEL_CONTROL_HP (1<<4)
+#define SM501_DC_PANEL_CONTROL_GAMMA (1<<3)
+#define SM501_DC_PANEL_CONTROL_EN (1<<2)
-#define SM501_DC_PANEL_CONTROL_8BPP (0<<0)
-#define SM501_DC_PANEL_CONTROL_16BPP (1<<0)
-#define SM501_DC_PANEL_CONTROL_32BPP (2<<0)
+#define SM501_DC_PANEL_CONTROL_8BPP (0<<0)
+#define SM501_DC_PANEL_CONTROL_16BPP (1<<0)
+#define SM501_DC_PANEL_CONTROL_32BPP (2<<0)
-#define SM501_DC_PANEL_PANNING_CONTROL (0x004)
-#define SM501_DC_PANEL_COLOR_KEY (0x008)
-#define SM501_DC_PANEL_FB_ADDR (0x00C)
-#define SM501_DC_PANEL_FB_OFFSET (0x010)
-#define SM501_DC_PANEL_FB_WIDTH (0x014)
-#define SM501_DC_PANEL_FB_HEIGHT (0x018)
-#define SM501_DC_PANEL_TL_LOC (0x01C)
-#define SM501_DC_PANEL_BR_LOC (0x020)
-#define SM501_DC_PANEL_H_TOT (0x024)
-#define SM501_DC_PANEL_H_SYNC (0x028)
-#define SM501_DC_PANEL_V_TOT (0x02C)
-#define SM501_DC_PANEL_V_SYNC (0x030)
-#define SM501_DC_PANEL_CUR_LINE (0x034)
+#define SM501_DC_PANEL_PANNING_CONTROL (0x004)
+#define SM501_DC_PANEL_COLOR_KEY (0x008)
+#define SM501_DC_PANEL_FB_ADDR (0x00C)
+#define SM501_DC_PANEL_FB_OFFSET (0x010)
+#define SM501_DC_PANEL_FB_WIDTH (0x014)
+#define SM501_DC_PANEL_FB_HEIGHT (0x018)
+#define SM501_DC_PANEL_TL_LOC (0x01C)
+#define SM501_DC_PANEL_BR_LOC (0x020)
+#define SM501_DC_PANEL_H_TOT (0x024)
+#define SM501_DC_PANEL_H_SYNC (0x028)
+#define SM501_DC_PANEL_V_TOT (0x02C)
+#define SM501_DC_PANEL_V_SYNC (0x030)
+#define SM501_DC_PANEL_CUR_LINE (0x034)
-#define SM501_DC_VIDEO_CONTROL (0x040)
-#define SM501_DC_VIDEO_FB0_ADDR (0x044)
-#define SM501_DC_VIDEO_FB_WIDTH (0x048)
-#define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C)
-#define SM501_DC_VIDEO_TL_LOC (0x050)
-#define SM501_DC_VIDEO_BR_LOC (0x054)
-#define SM501_DC_VIDEO_SCALE (0x058)
-#define SM501_DC_VIDEO_INIT_SCALE (0x05C)
-#define SM501_DC_VIDEO_YUV_CONSTANTS (0x060)
-#define SM501_DC_VIDEO_FB1_ADDR (0x064)
-#define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068)
+#define SM501_DC_VIDEO_CONTROL (0x040)
+#define SM501_DC_VIDEO_FB0_ADDR (0x044)
+#define SM501_DC_VIDEO_FB_WIDTH (0x048)
+#define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C)
+#define SM501_DC_VIDEO_TL_LOC (0x050)
+#define SM501_DC_VIDEO_BR_LOC (0x054)
+#define SM501_DC_VIDEO_SCALE (0x058)
+#define SM501_DC_VIDEO_INIT_SCALE (0x05C)
+#define SM501_DC_VIDEO_YUV_CONSTANTS (0x060)
+#define SM501_DC_VIDEO_FB1_ADDR (0x064)
+#define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068)
-#define SM501_DC_VIDEO_ALPHA_CONTROL (0x080)
-#define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084)
-#define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088)
-#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C)
-#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090)
-#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094)
-#define SM501_DC_VIDEO_ALPHA_SCALE (0x098)
-#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C)
-#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0)
-#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4)
+#define SM501_DC_VIDEO_ALPHA_CONTROL (0x080)
+#define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084)
+#define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088)
+#define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C)
+#define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090)
+#define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094)
+#define SM501_DC_VIDEO_ALPHA_SCALE (0x098)
+#define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C)
+#define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0)
+#define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4)
-#define SM501_DC_PANEL_HWC_BASE (0x0F0)
-#define SM501_DC_PANEL_HWC_ADDR (0x0F0)
-#define SM501_DC_PANEL_HWC_LOC (0x0F4)
-#define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8)
-#define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC)
+#define SM501_DC_PANEL_HWC_BASE (0x0F0)
+#define SM501_DC_PANEL_HWC_ADDR (0x0F0)
+#define SM501_DC_PANEL_HWC_LOC (0x0F4)
+#define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8)
+#define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC)
-#define SM501_HWC_EN (1<<31)
+#define SM501_HWC_EN (1<<31)
-#define SM501_OFF_HWC_ADDR (0x00)
-#define SM501_OFF_HWC_LOC (0x04)
-#define SM501_OFF_HWC_COLOR_1_2 (0x08)
-#define SM501_OFF_HWC_COLOR_3 (0x0C)
+#define SM501_OFF_HWC_ADDR (0x00)
+#define SM501_OFF_HWC_LOC (0x04)
+#define SM501_OFF_HWC_COLOR_1_2 (0x08)
+#define SM501_OFF_HWC_COLOR_3 (0x0C)
-#define SM501_DC_ALPHA_CONTROL (0x100)
-#define SM501_DC_ALPHA_FB_ADDR (0x104)
-#define SM501_DC_ALPHA_FB_OFFSET (0x108)
-#define SM501_DC_ALPHA_TL_LOC (0x10C)
-#define SM501_DC_ALPHA_BR_LOC (0x110)
-#define SM501_DC_ALPHA_CHROMA_KEY (0x114)
-#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118)
+#define SM501_DC_ALPHA_CONTROL (0x100)
+#define SM501_DC_ALPHA_FB_ADDR (0x104)
+#define SM501_DC_ALPHA_FB_OFFSET (0x108)
+#define SM501_DC_ALPHA_TL_LOC (0x10C)
+#define SM501_DC_ALPHA_BR_LOC (0x110)
+#define SM501_DC_ALPHA_CHROMA_KEY (0x114)
+#define SM501_DC_ALPHA_COLOR_LOOKUP (0x118)
-#define SM501_DC_CRT_CONTROL (0x200)
+#define SM501_DC_CRT_CONTROL (0x200)
-#define SM501_DC_CRT_CONTROL_TVP (1<<15)
-#define SM501_DC_CRT_CONTROL_CP (1<<14)
-#define SM501_DC_CRT_CONTROL_VSP (1<<13)
-#define SM501_DC_CRT_CONTROL_HSP (1<<12)
-#define SM501_DC_CRT_CONTROL_VS (1<<11)
-#define SM501_DC_CRT_CONTROL_BLANK (1<<10)
-#define SM501_DC_CRT_CONTROL_SEL (1<<9)
-#define SM501_DC_CRT_CONTROL_TE (1<<8)
-#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
-#define SM501_DC_CRT_CONTROL_GAMMA (1<<3)
-#define SM501_DC_CRT_CONTROL_ENABLE (1<<2)
+#define SM501_DC_CRT_CONTROL_TVP (1<<15)
+#define SM501_DC_CRT_CONTROL_CP (1<<14)
+#define SM501_DC_CRT_CONTROL_VSP (1<<13)
+#define SM501_DC_CRT_CONTROL_HSP (1<<12)
+#define SM501_DC_CRT_CONTROL_VS (1<<11)
+#define SM501_DC_CRT_CONTROL_BLANK (1<<10)
+#define SM501_DC_CRT_CONTROL_SEL (1<<9)
+#define SM501_DC_CRT_CONTROL_TE (1<<8)
+#define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
+#define SM501_DC_CRT_CONTROL_GAMMA (1<<3)
+#define SM501_DC_CRT_CONTROL_ENABLE (1<<2)
-#define SM501_DC_CRT_CONTROL_8BPP (0<<0)
-#define SM501_DC_CRT_CONTROL_16BPP (1<<0)
-#define SM501_DC_CRT_CONTROL_32BPP (2<<0)
+#define SM501_DC_CRT_CONTROL_8BPP (0<<0)
+#define SM501_DC_CRT_CONTROL_16BPP (1<<0)
+#define SM501_DC_CRT_CONTROL_32BPP (2<<0)
-#define SM501_DC_CRT_FB_ADDR (0x204)
-#define SM501_DC_CRT_FB_OFFSET (0x208)
-#define SM501_DC_CRT_H_TOT (0x20C)
-#define SM501_DC_CRT_H_SYNC (0x210)
-#define SM501_DC_CRT_V_TOT (0x214)
-#define SM501_DC_CRT_V_SYNC (0x218)
-#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C)
-#define SM501_DC_CRT_CUR_LINE (0x220)
-#define SM501_DC_CRT_MONITOR_DETECT (0x224)
+#define SM501_DC_CRT_FB_ADDR (0x204)
+#define SM501_DC_CRT_FB_OFFSET (0x208)
+#define SM501_DC_CRT_H_TOT (0x20C)
+#define SM501_DC_CRT_H_SYNC (0x210)
+#define SM501_DC_CRT_V_TOT (0x214)
+#define SM501_DC_CRT_V_SYNC (0x218)
+#define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C)
+#define SM501_DC_CRT_CUR_LINE (0x220)
+#define SM501_DC_CRT_MONITOR_DETECT (0x224)
-#define SM501_DC_CRT_HWC_BASE (0x230)
-#define SM501_DC_CRT_HWC_ADDR (0x230)
-#define SM501_DC_CRT_HWC_LOC (0x234)
-#define SM501_DC_CRT_HWC_COLOR_1_2 (0x238)
-#define SM501_DC_CRT_HWC_COLOR_3 (0x23C)
+#define SM501_DC_CRT_HWC_BASE (0x230)
+#define SM501_DC_CRT_HWC_ADDR (0x230)
+#define SM501_DC_CRT_HWC_LOC (0x234)
+#define SM501_DC_CRT_HWC_COLOR_1_2 (0x238)
+#define SM501_DC_CRT_HWC_COLOR_3 (0x23C)
-#define SM501_DC_PANEL_PALETTE (0x400)
+#define SM501_DC_PANEL_PALETTE (0x400)
-#define SM501_DC_VIDEO_PALETTE (0x800)
+#define SM501_DC_VIDEO_PALETTE (0x800)
-#define SM501_DC_CRT_PALETTE (0xC00)
+#define SM501_DC_CRT_PALETTE (0xC00)
/* Zoom Video port base */
-#define SM501_ZVPORT (0x090000)
+#define SM501_ZVPORT (0x090000)
/* AC97/I2S base */
-#define SM501_AC97 (0x0A0000)
+#define SM501_AC97 (0x0A0000)
/* 8051 micro controller base */
-#define SM501_UCONTROLLER (0x0B0000)
+#define SM501_UCONTROLLER (0x0B0000)
/* 8051 micro controller SRAM base */
-#define SM501_UCONTROLLER_SRAM (0x0C0000)
+#define SM501_UCONTROLLER_SRAM (0x0C0000)
/* DMA base */
-#define SM501_DMA (0x0D0000)
+#define SM501_DMA (0x0D0000)
/* 2d engine base */
-#define SM501_2D_ENGINE (0x100000)
-#define SM501_2D_SOURCE (0x00)
-#define SM501_2D_DESTINATION (0x04)
-#define SM501_2D_DIMENSION (0x08)
-#define SM501_2D_CONTROL (0x0C)
-#define SM501_2D_PITCH (0x10)
-#define SM501_2D_FOREGROUND (0x14)
-#define SM501_2D_BACKGROUND (0x18)
-#define SM501_2D_STRETCH (0x1C)
-#define SM501_2D_COLOR_COMPARE (0x20)
-#define SM501_2D_COLOR_COMPARE_MASK (0x24)
-#define SM501_2D_MASK (0x28)
-#define SM501_2D_CLIP_TL (0x2C)
-#define SM501_2D_CLIP_BR (0x30)
-#define SM501_2D_MONO_PATTERN_LOW (0x34)
-#define SM501_2D_MONO_PATTERN_HIGH (0x38)
-#define SM501_2D_WINDOW_WIDTH (0x3C)
-#define SM501_2D_SOURCE_BASE (0x40)
-#define SM501_2D_DESTINATION_BASE (0x44)
-#define SM501_2D_ALPHA (0x48)
-#define SM501_2D_WRAP (0x4C)
-#define SM501_2D_STATUS (0x50)
+#define SM501_2D_ENGINE (0x100000)
+#define SM501_2D_SOURCE (0x00)
+#define SM501_2D_DESTINATION (0x04)
+#define SM501_2D_DIMENSION (0x08)
+#define SM501_2D_CONTROL (0x0C)
+#define SM501_2D_PITCH (0x10)
+#define SM501_2D_FOREGROUND (0x14)
+#define SM501_2D_BACKGROUND (0x18)
+#define SM501_2D_STRETCH (0x1C)
+#define SM501_2D_COLOR_COMPARE (0x20)
+#define SM501_2D_COLOR_COMPARE_MASK (0x24)
+#define SM501_2D_MASK (0x28)
+#define SM501_2D_CLIP_TL (0x2C)
+#define SM501_2D_CLIP_BR (0x30)
+#define SM501_2D_MONO_PATTERN_LOW (0x34)
+#define SM501_2D_MONO_PATTERN_HIGH (0x38)
+#define SM501_2D_WINDOW_WIDTH (0x3C)
+#define SM501_2D_SOURCE_BASE (0x40)
+#define SM501_2D_DESTINATION_BASE (0x44)
+#define SM501_2D_ALPHA (0x48)
+#define SM501_2D_WRAP (0x4C)
+#define SM501_2D_STATUS (0x50)
-#define SM501_CSC_Y_SOURCE_BASE (0xC8)
-#define SM501_CSC_CONSTANTS (0xCC)
-#define SM501_CSC_Y_SOURCE_X (0xD0)
-#define SM501_CSC_Y_SOURCE_Y (0xD4)
-#define SM501_CSC_U_SOURCE_BASE (0xD8)
-#define SM501_CSC_V_SOURCE_BASE (0xDC)
-#define SM501_CSC_SOURCE_DIMENSION (0xE0)
-#define SM501_CSC_SOURCE_PITCH (0xE4)
-#define SM501_CSC_DESTINATION (0xE8)
-#define SM501_CSC_DESTINATION_DIMENSION (0xEC)
-#define SM501_CSC_DESTINATION_PITCH (0xF0)
-#define SM501_CSC_SCALE_FACTOR (0xF4)
-#define SM501_CSC_DESTINATION_BASE (0xF8)
-#define SM501_CSC_CONTROL (0xFC)
+#define SM501_CSC_Y_SOURCE_BASE (0xC8)
+#define SM501_CSC_CONSTANTS (0xCC)
+#define SM501_CSC_Y_SOURCE_X (0xD0)
+#define SM501_CSC_Y_SOURCE_Y (0xD4)
+#define SM501_CSC_U_SOURCE_BASE (0xD8)
+#define SM501_CSC_V_SOURCE_BASE (0xDC)
+#define SM501_CSC_SOURCE_DIMENSION (0xE0)
+#define SM501_CSC_SOURCE_PITCH (0xE4)
+#define SM501_CSC_DESTINATION (0xE8)
+#define SM501_CSC_DESTINATION_DIMENSION (0xEC)
+#define SM501_CSC_DESTINATION_PITCH (0xF0)
+#define SM501_CSC_SCALE_FACTOR (0xF4)
+#define SM501_CSC_DESTINATION_BASE (0xF8)
+#define SM501_CSC_CONTROL (0xFC)
/* 2d engine data port base */
-#define SM501_2D_ENGINE_DATA (0x110000)
+#define SM501_2D_ENGINE_DATA (0x110000)
/* end of register definitions */
/* SM501 local memory size taken from "linux/drivers/mfd/sm501.c" */
static const uint32_t sm501_mem_local_size[] = {
- [0] = 4*1024*1024,
- [1] = 8*1024*1024,
- [2] = 16*1024*1024,
- [3] = 32*1024*1024,
- [4] = 64*1024*1024,
- [5] = 2*1024*1024,
+ [0] = 4*1024*1024,
+ [1] = 8*1024*1024,
+ [2] = 16*1024*1024,
+ [3] = 32*1024*1024,
+ [4] = 64*1024*1024,
+ [5] = 2*1024*1024,
};
#define get_local_mem_size(s) sm501_mem_local_size[(s)->local_mem_size_index]
@@ -515,13 +515,13 @@
int i, index = 0;
for (i = 0; i < ARRAY_SIZE(sm501_mem_local_size); i++) {
- uint32_t new_size = sm501_mem_local_size[i];
- if (new_size >= size) {
- if (norm_size == 0 || norm_size > new_size) {
- norm_size = new_size;
- index = i;
- }
- }
+ uint32_t new_size = sm501_mem_local_size[i];
+ if (new_size >= size) {
+ if (norm_size == 0 || norm_size > new_size) {
+ norm_size = new_size;
+ index = i;
+ }
+ }
}
return index;
@@ -535,95 +535,95 @@
switch(addr) {
case SM501_SYSTEM_CONTROL:
- ret = s->system_control;
- break;
+ ret = s->system_control;
+ break;
case SM501_MISC_CONTROL:
- ret = s->misc_control;
- break;
+ ret = s->misc_control;
+ break;
case SM501_GPIO31_0_CONTROL:
- ret = s->gpio_31_0_control;
- break;
+ ret = s->gpio_31_0_control;
+ break;
case SM501_GPIO63_32_CONTROL:
- ret = s->gpio_63_32_control;
- break;
+ ret = s->gpio_63_32_control;
+ break;
case SM501_DEVICEID:
- ret = 0x050100A0;
- break;
+ ret = 0x050100A0;
+ break;
case SM501_DRAM_CONTROL:
- ret = (s->dram_control & 0x07F107C0) | s->local_mem_size_index << 13;
- break;
+ ret = (s->dram_control & 0x07F107C0) | s->local_mem_size_index << 13;
+ break;
case SM501_IRQ_MASK:
- ret = s->irq_mask;
- break;
+ ret = s->irq_mask;
+ break;
case SM501_MISC_TIMING:
- /* TODO : simulate gate control */
- ret = s->misc_timing;
- break;
+ /* TODO : simulate gate control */
+ ret = s->misc_timing;
+ break;
case SM501_CURRENT_GATE:
- /* TODO : simulate gate control */
- ret = 0x00021807;
- break;
+ /* TODO : simulate gate control */
+ ret = 0x00021807;
+ break;
case SM501_CURRENT_CLOCK:
- ret = 0x2A1A0A09;
- break;
+ ret = 0x2A1A0A09;
+ break;
case SM501_POWER_MODE_CONTROL:
- ret = s->power_mode_control;
- break;
+ ret = s->power_mode_control;
+ break;
default:
- printf("sm501 system config : not implemented register read."
- " addr=%x\n", (int)addr);
- assert(0);
+ printf("sm501 system config : not implemented register read."
+ " addr=%x\n", (int)addr);
+ assert(0);
}
return ret;
}
static void sm501_system_config_write(void *opaque,
- target_phys_addr_t addr, uint32_t value)
+ target_phys_addr_t addr, uint32_t value)
{
SM501State * s = (SM501State *)opaque;
SM501_DPRINTF("sm501 system config regs : write addr=%x, val=%x\n",
- addr, value);
+ addr, value);
switch(addr) {
case SM501_SYSTEM_CONTROL:
- s->system_control = value & 0xE300B8F7;
- break;
+ s->system_control = value & 0xE300B8F7;
+ break;
case SM501_MISC_CONTROL:
- s->misc_control = value & 0xFF7FFF20;
- break;
+ s->misc_control = value & 0xFF7FFF20;
+ break;
case SM501_GPIO31_0_CONTROL:
- s->gpio_31_0_control = value;
- break;
+ s->gpio_31_0_control = value;
+ break;
case SM501_GPIO63_32_CONTROL:
- s->gpio_63_32_control = value;
- break;
+ s->gpio_63_32_control = value;
+ break;
case SM501_DRAM_CONTROL:
- s->local_mem_size_index = (value >> 13) & 0x7;
- /* rODO : check validity of size change */
- s->dram_control |= value & 0x7FFFFFC3;
- break;
+ s->local_mem_size_index = (value >> 13) & 0x7;
+ /* rODO : check validity of size change */
+ s->dram_control |= value & 0x7FFFFFC3;
+ break;
case SM501_IRQ_MASK:
- s->irq_mask = value;
- break;
+ s->irq_mask = value;
+ break;
case SM501_MISC_TIMING:
- s->misc_timing = value & 0xF31F1FFF;
- break;
+ s->misc_timing = value & 0xF31F1FFF;
+ break;
case SM501_POWER_MODE_0_GATE:
case SM501_POWER_MODE_1_GATE:
case SM501_POWER_MODE_0_CLOCK:
case SM501_POWER_MODE_1_CLOCK:
- /* TODO : simulate gate & clock control */
- break;
+ /* TODO : simulate gate & clock control */
+ break;
case SM501_POWER_MODE_CONTROL:
- s->power_mode_control = value & 0x00000003;
- break;
+ s->power_mode_control = value & 0x00000003;
+ break;
default:
- printf("sm501 system config : not implemented register write."
- " addr=%x, val=%x\n", (int)addr, value);
- assert(0);
+ printf("sm501 system config : not implemented register write."
+ " addr=%x, val=%x\n", (int)addr, value);
+ assert(0);
}
}
@@ -652,11 +652,11 @@
}
static void sm501_palette_write(void *opaque,
- target_phys_addr_t addr, uint32_t value)
+ target_phys_addr_t addr, uint32_t value)
{
SM501State * s = (SM501State *)opaque;
SM501_DPRINTF("sm501 palette write addr=%x, val=%x\n",
- (int)addr, value);
+ (int)addr, value);
/* TODO : consider BYTE/WORD access */
/* TODO : consider endian */
@@ -674,194 +674,194 @@
switch(addr) {
case SM501_DC_PANEL_CONTROL:
- ret = s->dc_panel_control;
- break;
+ ret = s->dc_panel_control;
+ break;
case SM501_DC_PANEL_PANNING_CONTROL:
- ret = s->dc_panel_panning_control;
- break;
+ ret = s->dc_panel_panning_control;
+ break;
case SM501_DC_PANEL_FB_ADDR:
- ret = s->dc_panel_fb_addr;
- break;
+ ret = s->dc_panel_fb_addr;
+ break;
case SM501_DC_PANEL_FB_OFFSET:
- ret = s->dc_panel_fb_offset;
- break;
+ ret = s->dc_panel_fb_offset;
+ break;
case SM501_DC_PANEL_FB_WIDTH:
- ret = s->dc_panel_fb_width;
- break;
+ ret = s->dc_panel_fb_width;
+ break;
case SM501_DC_PANEL_FB_HEIGHT:
- ret = s->dc_panel_fb_height;
- break;
+ ret = s->dc_panel_fb_height;
+ break;
case SM501_DC_PANEL_TL_LOC:
- ret = s->dc_panel_tl_location;
- break;
+ ret = s->dc_panel_tl_location;
+ break;
case SM501_DC_PANEL_BR_LOC:
- ret = s->dc_panel_br_location;
- break;
+ ret = s->dc_panel_br_location;
+ break;
case SM501_DC_PANEL_H_TOT:
- ret = s->dc_panel_h_total;
- break;
+ ret = s->dc_panel_h_total;
+ break;
case SM501_DC_PANEL_H_SYNC:
- ret = s->dc_panel_h_sync;
- break;
+ ret = s->dc_panel_h_sync;
+ break;
case SM501_DC_PANEL_V_TOT:
- ret = s->dc_panel_v_total;
- break;
+ ret = s->dc_panel_v_total;
+ break;
case SM501_DC_PANEL_V_SYNC:
- ret = s->dc_panel_v_sync;
- break;
+ ret = s->dc_panel_v_sync;
+ break;
case SM501_DC_CRT_CONTROL:
- ret = s->dc_crt_control;
- break;
+ ret = s->dc_crt_control;
+ break;
case SM501_DC_CRT_FB_ADDR:
- ret = s->dc_crt_fb_addr;
- break;
+ ret = s->dc_crt_fb_addr;
+ break;
case SM501_DC_CRT_FB_OFFSET:
- ret = s->dc_crt_fb_offset;
- break;
+ ret = s->dc_crt_fb_offset;
+ break;
case SM501_DC_CRT_H_TOT:
- ret = s->dc_crt_h_total;
- break;
+ ret = s->dc_crt_h_total;
+ break;
case SM501_DC_CRT_H_SYNC:
- ret = s->dc_crt_h_sync;
- break;
+ ret = s->dc_crt_h_sync;
+ break;
case SM501_DC_CRT_V_TOT:
- ret = s->dc_crt_v_total;
- break;
+ ret = s->dc_crt_v_total;
+ break;
case SM501_DC_CRT_V_SYNC:
- ret = s->dc_crt_v_sync;
- break;
+ ret = s->dc_crt_v_sync;
+ break;
case SM501_DC_CRT_HWC_ADDR:
- ret = s->dc_crt_hwc_addr;
- break;
+ ret = s->dc_crt_hwc_addr;
+ break;
case SM501_DC_CRT_HWC_LOC:
- ret = s->dc_crt_hwc_addr;
- break;
+ ret = s->dc_crt_hwc_addr;
+ break;
case SM501_DC_CRT_HWC_COLOR_1_2:
- ret = s->dc_crt_hwc_addr;
- break;
+ ret = s->dc_crt_hwc_addr;
+ break;
case SM501_DC_CRT_HWC_COLOR_3:
- ret = s->dc_crt_hwc_addr;
- break;
+ ret = s->dc_crt_hwc_addr;
+ break;
case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:
ret = sm501_palette_read(opaque, addr - SM501_DC_PANEL_PALETTE);
break;
default:
- printf("sm501 disp ctrl : not implemented register read."
- " addr=%x\n", (int)addr);
- assert(0);
+ printf("sm501 disp ctrl : not implemented register read."
+ " addr=%x\n", (int)addr);
+ assert(0);
}
return ret;
}
static void sm501_disp_ctrl_write(void *opaque,
- target_phys_addr_t addr,
- uint32_t value)
+ target_phys_addr_t addr,
+ uint32_t value)
{
SM501State * s = (SM501State *)opaque;
SM501_DPRINTF("sm501 disp ctrl regs : write addr=%x, val=%x\n",
- addr, value);
+ addr, value);
switch(addr) {
case SM501_DC_PANEL_CONTROL:
- s->dc_panel_control = value & 0x0FFF73FF;
- break;
+ s->dc_panel_control = value & 0x0FFF73FF;
+ break;
case SM501_DC_PANEL_PANNING_CONTROL:
- s->dc_panel_panning_control = value & 0xFF3FFF3F;
- break;
+ s->dc_panel_panning_control = value & 0xFF3FFF3F;
+ break;
case SM501_DC_PANEL_FB_ADDR:
- s->dc_panel_fb_addr = value & 0x8FFFFFF0;
- break;
+ s->dc_panel_fb_addr = value & 0x8FFFFFF0;
+ break;
case SM501_DC_PANEL_FB_OFFSET:
- s->dc_panel_fb_offset = value & 0x3FF03FF0;
- break;
+ s->dc_panel_fb_offset = value & 0x3FF03FF0;
+ break;
case SM501_DC_PANEL_FB_WIDTH:
- s->dc_panel_fb_width = value & 0x0FFF0FFF;
- break;
+ s->dc_panel_fb_width = value & 0x0FFF0FFF;
+ break;
case SM501_DC_PANEL_FB_HEIGHT:
- s->dc_panel_fb_height = value & 0x0FFF0FFF;
- break;
+ s->dc_panel_fb_height = value & 0x0FFF0FFF;
+ break;
case SM501_DC_PANEL_TL_LOC:
- s->dc_panel_tl_location = value & 0x07FF07FF;
- break;
+ s->dc_panel_tl_location = value & 0x07FF07FF;
+ break;
case SM501_DC_PANEL_BR_LOC:
- s->dc_panel_br_location = value & 0x07FF07FF;
- break;
+ s->dc_panel_br_location = value & 0x07FF07FF;
+ break;
case SM501_DC_PANEL_H_TOT:
- s->dc_panel_h_total = value & 0x0FFF0FFF;
- break;
+ s->dc_panel_h_total = value & 0x0FFF0FFF;
+ break;
case SM501_DC_PANEL_H_SYNC:
- s->dc_panel_h_sync = value & 0x00FF0FFF;
- break;
+ s->dc_panel_h_sync = value & 0x00FF0FFF;
+ break;
case SM501_DC_PANEL_V_TOT:
- s->dc_panel_v_total = value & 0x0FFF0FFF;
- break;
+ s->dc_panel_v_total = value & 0x0FFF0FFF;
+ break;
case SM501_DC_PANEL_V_SYNC:
- s->dc_panel_v_sync = value & 0x003F0FFF;
- break;
+ s->dc_panel_v_sync = value & 0x003F0FFF;
+ break;
case SM501_DC_PANEL_HWC_ADDR:
- s->dc_panel_hwc_addr = value & 0x8FFFFFF0;
- break;
+ s->dc_panel_hwc_addr = value & 0x8FFFFFF0;
+ break;
case SM501_DC_PANEL_HWC_LOC:
- s->dc_panel_hwc_addr = value & 0x0FFF0FFF;
- break;
+ s->dc_panel_hwc_addr = value & 0x0FFF0FFF;
+ break;
case SM501_DC_PANEL_HWC_COLOR_1_2:
- s->dc_panel_hwc_addr = value;
- break;
+ s->dc_panel_hwc_addr = value;
+ break;
case SM501_DC_PANEL_HWC_COLOR_3:
- s->dc_panel_hwc_addr = value & 0x0000FFFF;
- break;
+ s->dc_panel_hwc_addr = value & 0x0000FFFF;
+ break;
case SM501_DC_CRT_CONTROL:
- s->dc_crt_control = value & 0x0003FFFF;
- break;
+ s->dc_crt_control = value & 0x0003FFFF;
+ break;
case SM501_DC_CRT_FB_ADDR:
- s->dc_crt_fb_addr = value & 0x8FFFFFF0;
- break;
+ s->dc_crt_fb_addr = value & 0x8FFFFFF0;
+ break;
case SM501_DC_CRT_FB_OFFSET:
- s->dc_crt_fb_offset = value & 0x3FF03FF0;
- break;
+ s->dc_crt_fb_offset = value & 0x3FF03FF0;
+ break;
case SM501_DC_CRT_H_TOT:
- s->dc_crt_h_total = value & 0x0FFF0FFF;
- break;
+ s->dc_crt_h_total = value & 0x0FFF0FFF;
+ break;
case SM501_DC_CRT_H_SYNC:
- s->dc_crt_h_sync = value & 0x00FF0FFF;
- break;
+ s->dc_crt_h_sync = value & 0x00FF0FFF;
+ break;
case SM501_DC_CRT_V_TOT:
- s->dc_crt_v_total = value & 0x0FFF0FFF;
- break;
+ s->dc_crt_v_total = value & 0x0FFF0FFF;
+ break;
case SM501_DC_CRT_V_SYNC:
- s->dc_crt_v_sync = value & 0x003F0FFF;
- break;
+ s->dc_crt_v_sync = value & 0x003F0FFF;
+ break;
case SM501_DC_CRT_HWC_ADDR:
- s->dc_crt_hwc_addr = value & 0x8FFFFFF0;
- break;
+ s->dc_crt_hwc_addr = value & 0x8FFFFFF0;
+ break;
case SM501_DC_CRT_HWC_LOC:
- s->dc_crt_hwc_addr = value & 0x0FFF0FFF;
- break;
+ s->dc_crt_hwc_addr = value & 0x0FFF0FFF;
+ break;
case SM501_DC_CRT_HWC_COLOR_1_2:
- s->dc_crt_hwc_addr = value;
- break;
+ s->dc_crt_hwc_addr = value;
+ break;
case SM501_DC_CRT_HWC_COLOR_3:
- s->dc_crt_hwc_addr = value & 0x0000FFFF;
- break;
+ s->dc_crt_hwc_addr = value & 0x0000FFFF;
+ break;
case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:
sm501_palette_write(opaque, addr - SM501_DC_PANEL_PALETTE, value);
break;
default:
- printf("sm501 disp ctrl : not implemented register write."
- " addr=%x, val=%x\n", (int)addr, value);
- assert(0);
+ printf("sm501 disp ctrl : not implemented register write."
+ " addr=%x, val=%x\n", (int)addr, value);
+ assert(0);
}
}
@@ -882,7 +882,7 @@
#include "pixel_ops.h"
typedef void draw_line_func(uint8_t *d, const uint8_t *s,
- int width, const uint32_t *pal);
+ int width, const uint32_t *pal);
#define DEPTH 8
#include "sm501_template.h"
@@ -943,16 +943,16 @@
switch(ds_get_bits_per_pixel(s)) {
default:
case 8:
- return 0;
+ return 0;
case 15:
return 1;
case 16:
return 2;
case 32:
- if (is_surface_bgr(s->surface))
- return 4;
- else
- return 3;
+ if (is_surface_bgr(s->surface))
+ return 4;
+ else
+ return 3;
}
}
@@ -966,7 +966,7 @@
int src_bpp = 0;
int dst_bpp = ds_get_bytes_per_pixel(s->ds) + (ds_get_bits_per_pixel(s->ds) % 8 ? 1 : 0);
uint32_t * palette = (uint32_t *)&s->dc_palette[SM501_DC_CRT_PALETTE
- - SM501_DC_PANEL_PALETTE];
+ - SM501_DC_PANEL_PALETTE];
int ds_depth_index = get_depth_index(s->ds);
draw_line_func * draw_line = NULL;
int full_update = 0;
@@ -978,73 +978,73 @@
/* choose draw_line function */
switch (s->dc_crt_control & 3) {
case SM501_DC_CRT_CONTROL_8BPP:
- src_bpp = 1;
- draw_line = draw_line8_funcs[ds_depth_index];
- break;
+ src_bpp = 1;
+ draw_line = draw_line8_funcs[ds_depth_index];
+ break;
case SM501_DC_CRT_CONTROL_16BPP:
- src_bpp = 2;
- draw_line = draw_line16_funcs[ds_depth_index];
- break;
+ src_bpp = 2;
+ draw_line = draw_line16_funcs[ds_depth_index];
+ break;
case SM501_DC_CRT_CONTROL_32BPP:
- src_bpp = 4;
- draw_line = draw_line32_funcs[ds_depth_index];
- break;
+ src_bpp = 4;
+ draw_line = draw_line32_funcs[ds_depth_index];
+ break;
default:
- printf("sm501 draw crt : invalid DC_CRT_CONTROL=%x.\n",
- s->dc_crt_control);
- assert(0);
- break;
+ printf("sm501 draw crt : invalid DC_CRT_CONTROL=%x.\n",
+ s->dc_crt_control);
+ assert(0);
+ break;
}
/* adjust console size */
if (s->last_width != width || s->last_height != height) {
- qemu_console_resize(s->ds, width, height);
- s->last_width = width;
- s->last_height = height;
- full_update = 1;
+ qemu_console_resize(s->ds, width, height);
+ s->last_width = width;
+ s->last_height = height;
+ full_update = 1;
}
/* draw each line according to conditions */
for (y = 0; y < height; y++) {
- int update = full_update;
- ram_addr_t page0 = offset & TARGET_PAGE_MASK;
- ram_addr_t page1 = (offset + width * src_bpp - 1) & TARGET_PAGE_MASK;
- ram_addr_t page;
+ int update = full_update;
+ ram_addr_t page0 = offset & TARGET_PAGE_MASK;
+ ram_addr_t page1 = (offset + width * src_bpp - 1) & TARGET_PAGE_MASK;
+ ram_addr_t page;
- /* check dirty flags for each line */
- for (page = page0; page <= page1; page += TARGET_PAGE_SIZE)
- if (cpu_physical_memory_get_dirty(page, VGA_DIRTY_FLAG))
- update = 1;
+ /* check dirty flags for each line */
+ for (page = page0; page <= page1; page += TARGET_PAGE_SIZE)
+ if (cpu_physical_memory_get_dirty(page, VGA_DIRTY_FLAG))
+ update = 1;
- /* draw line and change status */
- if (update) {
- draw_line(&(ds_get_data(s->ds)[y * width * dst_bpp]), src, width, palette);
- if (y_start < 0)
- y_start = y;
- if (page0 < page_min)
- page_min = page0;
- if (page1 > page_max)
- page_max = page1;
- } else {
- if (y_start >= 0) {
- /* flush to display */
- dpy_update(s->ds, 0, y_start, width, y - y_start);
- y_start = -1;
- }
- }
+ /* draw line and change status */
+ if (update) {
+ draw_line(&(ds_get_data(s->ds)[y * width * dst_bpp]), src, width, palette);
+ if (y_start < 0)
+ y_start = y;
+ if (page0 < page_min)
+ page_min = page0;
+ if (page1 > page_max)
+ page_max = page1;
+ } else {
+ if (y_start >= 0) {
+ /* flush to display */
+ dpy_update(s->ds, 0, y_start, width, y - y_start);
+ y_start = -1;
+ }
+ }
- src += width * src_bpp;
- offset += width * src_bpp;
+ src += width * src_bpp;
+ offset += width * src_bpp;
}
/* complete flush to display */
if (y_start >= 0)
- dpy_update(s->ds, 0, y_start, width, y - y_start);
+ dpy_update(s->ds, 0, y_start, width, y - y_start);
/* clear dirty flags */
if (page_max != -1)
- cpu_physical_memory_reset_dirty(page_min, page_max + TARGET_PAGE_SIZE,
- VGA_DIRTY_FLAG);
+ cpu_physical_memory_reset_dirty(page_min, page_max + TARGET_PAGE_SIZE,
+ VGA_DIRTY_FLAG);
}
static void sm501_update_display(void *opaque)
@@ -1052,7 +1052,7 @@
SM501State * s = (SM501State *)opaque;
if (s->dc_crt_control & SM501_DC_CRT_CONTROL_ENABLE)
- sm501_draw_crt(s);
+ sm501_draw_crt(s);
}
void sm501_init(uint32_t base, uint32_t local_mem_bytes, qemu_irq irq,
@@ -1066,9 +1066,9 @@
s = (SM501State *)qemu_mallocz(sizeof(SM501State));
s->base = base;
s->local_mem_size_index
- = get_local_mem_size_index(local_mem_bytes);
+ = get_local_mem_size_index(local_mem_bytes);
SM501_DPRINTF("local mem size=%x. index=%d\n", get_local_mem_size(s),
- s->local_mem_size_index);
+ s->local_mem_size_index);
s->system_control = 0x00100000;
s->misc_control = 0x00001000; /* assumes SH, active=low */
s->dc_panel_control = 0x00010000;
@@ -1081,12 +1081,12 @@
/* map mmio */
sm501_system_config_index
- = cpu_register_io_memory(0, sm501_system_config_readfn,
- sm501_system_config_writefn, s);
+ = cpu_register_io_memory(0, sm501_system_config_readfn,
+ sm501_system_config_writefn, s);
cpu_register_physical_memory(base + MMIO_BASE_OFFSET,
- 0x6c, sm501_system_config_index);
+ 0x6c, sm501_system_config_index);
sm501_disp_ctrl_index = cpu_register_io_memory(0, sm501_disp_ctrl_readfn,
- sm501_disp_ctrl_writefn, s);
+ sm501_disp_ctrl_writefn, s);
cpu_register_physical_memory(base + MMIO_BASE_OFFSET + SM501_DC,
0x1000, sm501_disp_ctrl_index);
@@ -1096,11 +1096,11 @@
/* bridge to serial emulation module */
if (chr)
- serial_mm_init(base + MMIO_BASE_OFFSET + SM501_UART0, 2,
- 0, /* TODO : chain irq to IRL */
- 115200, chr, 1);
+ serial_mm_init(base + MMIO_BASE_OFFSET + SM501_UART0, 2,
+ 0, /* TODO : chain irq to IRL */
+ 115200, chr, 1);
/* create qemu graphic console */
s->ds = graphic_console_init(sm501_update_display, NULL,
- NULL, NULL, s);
+ NULL, NULL, s);
}
Index: trunk/hw/sm501_template.h
===================================================================
--- trunk/hw/sm501_template.h (revision 7190)
+++ trunk/hw/sm501_template.h (working copy)
@@ -47,40 +47,40 @@
{
uint8_t v, r, g, b;
do {
- v = ldub_raw(s);
- r = (pal[v] >> 16) & 0xff;
- g = (pal[v] >> 8) & 0xff;
- b = (pal[v] >> 0) & 0xff;
- ((PIXEL_TYPE *) d)[0] = glue(rgb_to_pixel, PIXEL_NAME)(r, g, b);
- s ++;
- d += BPP;
+ v = ldub_raw(s);
+ r = (pal[v] >> 16) & 0xff;
+ g = (pal[v] >> 8) & 0xff;
+ b = (pal[v] >> 0) & 0xff;
+ ((PIXEL_TYPE *) d)[0] = glue(rgb_to_pixel, PIXEL_NAME)(r, g, b);
+ s ++;
+ d += BPP;
} while (-- width != 0);
}
static void glue(draw_line16_, PIXEL_NAME)(
- uint8_t *d, const uint8_t *s, int width, const uint32_t *pal)
+ uint8_t *d, const uint8_t *s, int width, const uint32_t *pal)
{
uint16_t rgb565;
uint8_t r, g, b;
do {
- rgb565 = lduw_raw(s);
- r = ((rgb565 >> 11) & 0x1f) << 3;
- g = ((rgb565 >> 5) & 0x3f) << 2;
- b = ((rgb565 >> 0) & 0x1f) << 3;
- ((PIXEL_TYPE *) d)[0] = glue(rgb_to_pixel, PIXEL_NAME)(r, g, b);
- s += 2;
- d += BPP;
+ rgb565 = lduw_raw(s);
+ r = ((rgb565 >> 11) & 0x1f) << 3;
+ g = ((rgb565 >> 5) & 0x3f) << 2;
+ b = ((rgb565 >> 0) & 0x1f) << 3;
+ ((PIXEL_TYPE *) d)[0] = glue(rgb_to_pixel, PIXEL_NAME)(r, g, b);
+ s += 2;
+ d += BPP;
} while (-- width != 0);
}
static void glue(draw_line32_, PIXEL_NAME)(
- uint8_t *d, const uint8_t *s, int width, const uint32_t *pal)
+ uint8_t *d, const uint8_t *s, int width, const uint32_t *pal)
{
uint8_t r, g, b;
do {
- ldub_raw(s);
+ ldub_raw(s);
#if defined(TARGET_WORDS_BIGENDIAN)
r = s[1];
g = s[2];
@@ -90,9 +90,9 @@
g = s[1];
r = s[2];
#endif
- ((PIXEL_TYPE *) d)[0] = glue(rgb_to_pixel, PIXEL_NAME)(r, g, b);
- s += 4;
- d += BPP;
+ ((PIXEL_TYPE *) d)[0] = glue(rgb_to_pixel, PIXEL_NAME)(r, g, b);
+ s += 4;
+ d += BPP;
} while (-- width != 0);
}
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Qemu-devel] [PATCH] sh: sm501: Eliminates TABs from sm501 related files
2009-04-26 11:41 [Qemu-devel] [PATCH] sh: sm501: Eliminates TABs from sm501 related files Shin-ichiro KAWASAKI
@ 2009-04-26 11:54 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 2+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2009-04-26 11:54 UTC (permalink / raw)
To: Shin-ichiro KAWASAKI; +Cc: qemu-devel
On 20:41 Sun 26 Apr , Shin-ichiro KAWASAKI wrote:
> This patch simply removes TABs from 'sm501.c' and 'sm501_template.h',
> to be more consistent with CODING_STYLE.
>
I think tab are mor consistent
specially when we use git now ortherwise it will complain about whitespace
Best Regards,
J.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-04-26 11:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-04-26 11:41 [Qemu-devel] [PATCH] sh: sm501: Eliminates TABs from sm501 related files Shin-ichiro KAWASAKI
2009-04-26 11:54 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).