From: Alex Williamson <alex.williamson@hp.com>
To: qemu-devel@nongnu.org
Cc: alex.williamson@hp.com
Subject: [Qemu-devel] [PATCH 4/7] virtio-net: Fix MAC filter overflow handling
Date: Fri, 05 Jun 2009 14:47:08 -0600 [thread overview]
Message-ID: <20090605204707.3355.24355.stgit@kvm.aw> (raw)
In-Reply-To: <20090605204647.3355.81929.stgit@kvm.aw>
Overloading the promisc and allmulti flags for indicating filter
table overflow makes it difficult to track the actual requested
operating mode. Split these out into separate flags.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
---
hw/virtio-net.c | 31 +++++++++++++++++++++++--------
1 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/hw/virtio-net.c b/hw/virtio-net.c
index 395b735..64515a3 100644
--- a/hw/virtio-net.c
+++ b/hw/virtio-net.c
@@ -16,7 +16,7 @@
#include "qemu-timer.h"
#include "virtio-net.h"
-#define VIRTIO_NET_VM_VERSION 8
+#define VIRTIO_NET_VM_VERSION 9
#define MAC_TABLE_ENTRIES 32
#define MAX_VLAN (1 << 12) /* Per 802.1Q definition */
@@ -37,6 +37,8 @@ typedef struct VirtIONet
uint8_t allmulti;
struct {
int in_use;
+ uint8_t multi_overflow;
+ uint8_t uni_overflow;
uint8_t *macs;
} mac_table;
uint32_t *vlans;
@@ -98,6 +100,8 @@ static void virtio_net_reset(VirtIODevice *vdev)
/* Flush any MAC and VLAN filter table state */
n->mac_table.in_use = 0;
+ n->mac_table.multi_overflow = 0;
+ n->mac_table.uni_overflow = 0;
memset(n->mac_table.macs, 0, MAC_TABLE_ENTRIES * ETH_ALEN);
memset(n->vlans, 0, MAX_VLAN >> 3);
}
@@ -168,6 +172,8 @@ static int virtio_net_handle_mac(VirtIONet *n, uint8_t cmd,
return VIRTIO_NET_ERR;
n->mac_table.in_use = 0;
+ n->mac_table.uni_overflow = 0;
+ n->mac_table.multi_overflow = 0;
memset(n->mac_table.macs, 0, MAC_TABLE_ENTRIES * ETH_ALEN);
mac_data.entries = ldl_le_p(elem->out_sg[1].iov_base);
@@ -181,8 +187,7 @@ static int virtio_net_handle_mac(VirtIONet *n, uint8_t cmd,
mac_data.entries * ETH_ALEN);
n->mac_table.in_use += mac_data.entries;
} else {
- n->promisc = 1;
- return VIRTIO_NET_OK;
+ n->mac_table.uni_overflow = 1;
}
mac_data.entries = ldl_le_p(elem->out_sg[2].iov_base);
@@ -197,8 +202,9 @@ static int virtio_net_handle_mac(VirtIONet *n, uint8_t cmd,
elem->out_sg[2].iov_base + sizeof(mac_data),
mac_data.entries * ETH_ALEN);
n->mac_table.in_use += mac_data.entries;
- } else
- n->allmulti = 1;
+ } else {
+ n->mac_table.multi_overflow = 1;
+ }
}
return VIRTIO_NET_OK;
@@ -347,11 +353,13 @@ static int receive_filter(VirtIONet *n, const uint8_t *buf, int size)
if (ptr[0] & 1) { // multicast
if (!memcmp(ptr, bcast, sizeof(bcast))) {
return 1;
- } else if (n->allmulti) {
+ } else if (n->allmulti || n->mac_table.multi_overflow) {
return 1;
}
} else { // unicast
- if (!memcmp(ptr, n->mac, ETH_ALEN)) {
+ if (n->mac_table.uni_overflow) {
+ return 1;
+ } else if (!memcmp(ptr, n->mac, ETH_ALEN)) {
return 1;
}
}
@@ -527,6 +535,8 @@ static void virtio_net_save(QEMUFile *f, void *opaque)
qemu_put_buffer(f, n->mac_table.macs, n->mac_table.in_use * ETH_ALEN);
qemu_put_buffer(f, (uint8_t *)n->vlans, MAX_VLAN >> 3);
qemu_put_be32(f, 0); /* vnet-hdr placeholder */
+ qemu_put_byte(f, n->mac_table.multi_overflow);
+ qemu_put_byte(f, n->mac_table.uni_overflow);
}
static int virtio_net_load(QEMUFile *f, void *opaque, int version_id)
@@ -563,7 +573,7 @@ static int virtio_net_load(QEMUFile *f, void *opaque, int version_id)
n->mac_table.in_use * ETH_ALEN);
} else if (n->mac_table.in_use) {
qemu_fseek(f, n->mac_table.in_use * ETH_ALEN, SEEK_CUR);
- n->promisc = 1;
+ n->mac_table.multi_overflow = n->mac_table.uni_overflow = 1;
n->mac_table.in_use = 0;
}
}
@@ -577,6 +587,11 @@ static int virtio_net_load(QEMUFile *f, void *opaque, int version_id)
exit(1);
}
+ if (version_id >= 9) {
+ n->mac_table.multi_overflow = qemu_get_byte(f);
+ n->mac_table.uni_overflow = qemu_get_byte(f);
+ }
+
if (n->tx_timer_active) {
qemu_mod_timer(n->tx_timer,
qemu_get_clock(vm_clock) + TX_TIMER_INTERVAL);
next prev parent reply other threads:[~2009-06-05 20:52 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-05 20:46 [Qemu-devel] [PATCH 0/7] virtio-net: Filter cleanup/improvements Alex Williamson
2009-06-05 20:46 ` [Qemu-devel] [PATCH 1/7] virtio-net: Add version_id 7 placeholder for vnet header support Alex Williamson
2009-06-05 20:46 ` [Qemu-devel] [PATCH 2/7] virtio-net: Use a byte to store RX mode flags Alex Williamson
2009-06-05 20:47 ` [Qemu-devel] [PATCH 3/7] virtio-net: reorganize receive_filter() Alex Williamson
2009-06-05 20:47 ` Alex Williamson [this message]
2009-06-05 20:47 ` [Qemu-devel] [PATCH 5/7] virtio-net: MAC filter optimization Alex Williamson
2009-06-05 20:47 ` [Qemu-devel] [PATCH 6/7] virtio-net: Add new RX filter controls Alex Williamson
2009-06-06 20:48 ` Michael S. Tsirkin
2009-06-08 19:01 ` Alex Williamson
2009-06-08 19:18 ` Anthony Liguori
2009-06-08 19:29 ` Daniel P. Berrange
2009-06-08 21:03 ` Anthony Liguori
2009-06-09 9:57 ` Daniel P. Berrange
2009-06-09 15:00 ` Jamie Lokier
2009-06-09 15:42 ` [Qemu-devel] " Jan Kiszka
2009-06-09 23:50 ` Jamie Lokier
2009-06-10 8:46 ` Michael S. Tsirkin
2009-06-10 8:58 ` Jan Kiszka
2009-06-10 9:07 ` Michael S. Tsirkin
2009-06-10 9:13 ` Gleb Natapov
2009-06-10 9:17 ` Michael S. Tsirkin
2009-06-10 9:22 ` Gleb Natapov
2009-06-10 9:35 ` Michael S. Tsirkin
2009-06-08 20:18 ` [Qemu-devel] " Alex Williamson
2009-06-05 20:47 ` [Qemu-devel] [PATCH 7/7] virtio-net: Increase filter and control limits Alex Williamson
2009-06-06 20:44 ` Michael S. Tsirkin
2009-06-08 18:49 ` Alex Williamson
2009-06-09 19:25 ` [Qemu-devel] [PATCH 0/7] virtio-net: Filter cleanup/improvements Mark McLoughlin
2009-06-09 21:08 ` Alex Williamson
2009-06-10 6:51 ` Rusty Russell
2009-06-10 20:43 ` Alex Williamson
2009-06-12 17:07 ` Mark McLoughlin
2009-06-12 19:19 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090605204707.3355.24355.stgit@kvm.aw \
--to=alex.williamson@hp.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).