From: "Michael S. Tsirkin" <mst@redhat.com>
To: Paul Brook <paul@codesourcery.com>, Avi Kivity <avi@redhat.com>,
qemu-devel@nongnu.org, Carsten Otte <cotte@de.ibm.com>,
kvm@vger.kernel.org, Rusty Russell <rusty@rustcorp.com.au>,
virtualization@lists.linux-foundation.org,
Christian Borntraeger <borntraeger@de.ibm.com>,
Blue Swirl <blauwirbel@gmail.com>,
Anthony Liguori <anthony@codemonkey.ws>,
Glauber Costa <glommer@redhat.com>
Subject: [Qemu-devel] [PATCHv4 12/13] qemu: virtio save/load bindings
Date: Wed, 10 Jun 2009 15:29:26 +0300 [thread overview]
Message-ID: <20090610122926.GM27174@redhat.com> (raw)
In-Reply-To: <cover.1244635350.git.mst@redhat.com>
Implement bindings for virtio save/load. Use them in virtio pci.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/virtio-pci.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++++-
hw/virtio.c | 33 ++++++++++++++++-----------------
hw/virtio.h | 4 ++++
3 files changed, 69 insertions(+), 18 deletions(-)
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index 294f4c7..5a7bdcc 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -105,6 +105,50 @@ static void virtio_pci_notify(void *opaque, uint16_t vector)
qemu_set_irq(proxy->pci_dev.irq[0], proxy->vdev->isr & 1);
}
+static void virtio_pci_save_config(void * opaque, QEMUFile *f)
+{
+ VirtIOPCIProxy *proxy = opaque;
+ pci_device_save(&proxy->pci_dev, f);
+ msix_save(&proxy->pci_dev, f);
+ if (msix_present(&proxy->pci_dev))
+ qemu_put_be16(f, proxy->vdev->config_vector);
+}
+
+static void virtio_pci_save_queue(void * opaque, int n, QEMUFile *f)
+{
+ VirtIOPCIProxy *proxy = opaque;
+ if (msix_present(&proxy->pci_dev))
+ qemu_put_be16(f, virtio_queue_vector(proxy->vdev, n));
+}
+
+static int virtio_pci_load_config(void * opaque, QEMUFile *f)
+{
+ VirtIOPCIProxy *proxy = opaque;
+ int ret;
+ ret = pci_device_load(&proxy->pci_dev, f);
+ if (ret)
+ return ret;
+ ret = msix_load(&proxy->pci_dev, f);
+ if (ret)
+ return ret;
+ if (msix_present(&proxy->pci_dev))
+ qemu_get_be16s(f, &proxy->vdev->config_vector);
+
+ pci_resize_io_region(&proxy->pci_dev, 1, msix_bar_size(&proxy->pci_dev));
+ return 0;
+}
+
+static int virtio_pci_load_queue(void * opaque, int n, QEMUFile *f)
+{
+ VirtIOPCIProxy *proxy = opaque;
+ uint16_t vector;
+ if (!msix_present(&proxy->pci_dev))
+ return 0;
+ qemu_get_be16s(f, &vector);
+ virtio_queue_set_vector(proxy->vdev, n, vector);
+ return 0;
+}
+
static void virtio_pci_reset(void *opaque)
{
VirtIOPCIProxy *proxy = opaque;
@@ -317,7 +361,11 @@ static void virtio_write_config(PCIDevice *pci_dev, uint32_t address,
}
static const VirtIOBindings virtio_pci_bindings = {
- .notify = virtio_pci_notify
+ .notify = virtio_pci_notify,
+ .save_config = virtio_pci_save_config,
+ .load_config = virtio_pci_load_config,
+ .save_queue = virtio_pci_save_queue,
+ .load_queue = virtio_pci_load_queue,
};
static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev,
diff --git a/hw/virtio.c b/hw/virtio.c
index fe9f793..b773dff 100644
--- a/hw/virtio.c
+++ b/hw/virtio.c
@@ -568,9 +568,8 @@ void virtio_save(VirtIODevice *vdev, QEMUFile *f)
{
int i;
- /* FIXME: load/save binding. */
- //pci_device_save(&vdev->pci_dev, f);
- //msix_save(&vdev->pci_dev, f);
+ if (vdev->binding->save_config)
+ vdev->binding->save_config(vdev->binding_opaque, f);
qemu_put_8s(f, &vdev->status);
qemu_put_8s(f, &vdev->isr);
@@ -596,18 +595,20 @@ void virtio_save(VirtIODevice *vdev, QEMUFile *f)
qemu_put_be32(f, vdev->vq[i].vring.num);
qemu_put_be64(f, vdev->vq[i].pa);
qemu_put_be16s(f, &vdev->vq[i].last_avail_idx);
- if (vdev->nvectors)
- qemu_put_be16s(f, &vdev->vq[i].vector);
+ if (vdev->binding->save_queue)
+ vdev->binding->save_queue(vdev->binding_opaque, i, f);
}
}
-void virtio_load(VirtIODevice *vdev, QEMUFile *f)
+int virtio_load(VirtIODevice *vdev, QEMUFile *f)
{
- int num, i;
+ int num, i, ret;
- /* FIXME: load/save binding. */
- //pci_device_load(&vdev->pci_dev, f);
- //r = msix_load(&vdev->pci_dev, f);
+ if (vdev->binding->load_config) {
+ ret = vdev->binding->load_config(vdev->binding_opaque, f);
+ if (ret)
+ return ret;
+ }
qemu_get_8s(f, &vdev->status);
qemu_get_8s(f, &vdev->isr);
@@ -616,10 +617,6 @@ void virtio_load(VirtIODevice *vdev, QEMUFile *f)
vdev->config_len = qemu_get_be32(f);
qemu_get_buffer(f, vdev->config, vdev->config_len);
- if (vdev->nvectors) {
- qemu_get_be16s(f, &vdev->config_vector);
- //msix_vector_use(&vdev->pci_dev, vdev->config_vector);
- }
num = qemu_get_be32(f);
for (i = 0; i < num; i++) {
@@ -630,13 +627,15 @@ void virtio_load(VirtIODevice *vdev, QEMUFile *f)
if (vdev->vq[i].pa) {
virtqueue_init(&vdev->vq[i]);
}
- if (vdev->nvectors) {
- qemu_get_be16s(f, &vdev->vq[i].vector);
- //msix_vector_use(&vdev->pci_dev, vdev->config_vector);
+ if (vdev->binding->load_queue) {
+ ret = vdev->binding->load_queue(vdev->binding_opaque, i, f);
+ if (ret)
+ return ret;
}
}
virtio_notify_vector(vdev, VIRTIO_NO_VECTOR);
+ return 0;
}
void virtio_cleanup(VirtIODevice *vdev)
diff --git a/hw/virtio.h b/hw/virtio.h
index 04a3c3d..ce05517 100644
--- a/hw/virtio.h
+++ b/hw/virtio.h
@@ -72,6 +72,10 @@ typedef struct VirtQueueElement
typedef struct {
void (*notify)(void * opaque, uint16_t vector);
+ void (*save_config)(void * opaque, QEMUFile *f);
+ void (*save_queue)(void * opaque, int n, QEMUFile *f);
+ int (*load_config)(void * opaque, QEMUFile *f);
+ int (*load_queue)(void * opaque, int n, QEMUFile *f);
} VirtIOBindings;
#define VIRTIO_PCI_QUEUE_MAX 16
--
1.6.3.1.56.g79e1.dirty
next prev parent reply other threads:[~2009-06-10 12:33 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1244635350.git.mst@redhat.com>
2009-06-10 12:28 ` [Qemu-devel] [PATCHv4 01/13] qemu: make default_write_config use mask table Michael S. Tsirkin
2009-06-16 20:40 ` [Qemu-devel] " Anthony Liguori
2009-06-17 11:49 ` Michael S. Tsirkin
2009-06-10 12:28 ` [Qemu-devel] [PATCHv4 02/13] qemu: capability bits in pci save/restore Michael S. Tsirkin
2009-06-10 12:28 ` [Qemu-devel] [PATCHv4 03/13] qemu: add routines to manage PCI capabilities Michael S. Tsirkin
2009-06-10 12:28 ` [Qemu-devel] [PATCHv4 04/13] qemu: helper routines for pci access Michael S. Tsirkin
2009-06-10 12:28 ` [Qemu-devel] [PATCHv4 05/13] qemu: MSI-X support functions Michael S. Tsirkin
2009-06-10 12:28 ` [Qemu-devel] [PATCHv4 06/13] qemu: add flag to disable MSI-X by default Michael S. Tsirkin
2009-06-10 12:28 ` [Qemu-devel] [PATCHv4 07/13] qemu: minimal MSI/MSI-X implementation for PC Michael S. Tsirkin
2009-06-10 12:28 ` [Qemu-devel] [PATCHv4 08/13] qemu: add support for resizing regions Michael S. Tsirkin
2009-06-10 12:29 ` [Qemu-devel] [PATCHv4 09/13] qemu: virtio support for many interrupt vectors Michael S. Tsirkin
2009-06-10 12:29 ` [Qemu-devel] [PATCHv4 10/13] qemu: MSI-X support in virtio PCI Michael S. Tsirkin
2009-06-10 12:29 ` [Qemu-devel] [PATCHv4 11/13] qemu: request 3 vectors in virtio-net Michael S. Tsirkin
2009-06-10 12:29 ` Michael S. Tsirkin [this message]
2009-06-10 12:29 ` [Qemu-devel] [PATCHv4 13/13] qemu: add pci_get/set_byte Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090610122926.GM27174@redhat.com \
--to=mst@redhat.com \
--cc=anthony@codemonkey.ws \
--cc=avi@redhat.com \
--cc=blauwirbel@gmail.com \
--cc=borntraeger@de.ibm.com \
--cc=cotte@de.ibm.com \
--cc=glommer@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=paul@codesourcery.com \
--cc=qemu-devel@nongnu.org \
--cc=rusty@rustcorp.com.au \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).