From: Stuart Brady <sdbrady@ntlworld.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH] Remove dead i386 assembly code from softmmu_header.h
Date: Sun, 12 Jul 2009 20:09:40 +0100 [thread overview]
Message-ID: <20090712190940.GA8452@miranda.arrow> (raw)
This patch removes dead i386 assembly code from softmmu_header.h.
The code is conditional on ASM_SOFTMMU, which is never defined.
Optimisation for the fast path is already handled by tcg_out_qemu_ld()
and tcg_out_qemu_st(), so there seems to be little need for this code.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
diff --git a/softmmu_header.h b/softmmu_header.h
index a1b3808..3e82759 100644
--- a/softmmu_header.h
+++ b/softmmu_header.h
@@ -70,150 +70,6 @@
#define ADDR_READ addr_read
#endif
-#if (DATA_SIZE <= 4) && (TARGET_LONG_BITS == 32) && defined(__i386__) && \
- (ACCESS_TYPE < NB_MMU_MODES) && defined(ASM_SOFTMMU)
-
-static inline RES_TYPE glue(glue(ld, USUFFIX), MEMSUFFIX)(target_ulong ptr)
-{
- int res;
-
- asm volatile ("movl %1, %%edx\n"
- "movl %1, %%eax\n"
- "shrl %3, %%edx\n"
- "andl %4, %%eax\n"
- "andl %2, %%edx\n"
- "leal %5(%%edx, %%ebp), %%edx\n"
- "cmpl (%%edx), %%eax\n"
- "movl %1, %%eax\n"
- "je 1f\n"
- "movl %6, %%edx\n"
- "call %7\n"
- "movl %%eax, %0\n"
- "jmp 2f\n"
- "1:\n"
- "addl 12(%%edx), %%eax\n"
-#if DATA_SIZE == 1
- "movzbl (%%eax), %0\n"
-#elif DATA_SIZE == 2
- "movzwl (%%eax), %0\n"
-#elif DATA_SIZE == 4
- "movl (%%eax), %0\n"
-#else
-#error unsupported size
-#endif
- "2:\n"
- : "=r" (res)
- : "r" (ptr),
- "i" ((CPU_TLB_SIZE - 1) << CPU_TLB_ENTRY_BITS),
- "i" (TARGET_PAGE_BITS - CPU_TLB_ENTRY_BITS),
- "i" (TARGET_PAGE_MASK | (DATA_SIZE - 1)),
- "m" (*(uint32_t *)offsetof(CPUState, tlb_table[CPU_MMU_INDEX][0].addr_read)),
- "i" (CPU_MMU_INDEX),
- "m" (*(uint8_t *)&glue(glue(__ld, SUFFIX), MMUSUFFIX))
- : "%eax", "%ecx", "%edx", "memory", "cc");
- return res;
-}
-
-#if DATA_SIZE <= 2
-static inline int glue(glue(lds, SUFFIX), MEMSUFFIX)(target_ulong ptr)
-{
- int res;
-
- asm volatile ("movl %1, %%edx\n"
- "movl %1, %%eax\n"
- "shrl %3, %%edx\n"
- "andl %4, %%eax\n"
- "andl %2, %%edx\n"
- "leal %5(%%edx, %%ebp), %%edx\n"
- "cmpl (%%edx), %%eax\n"
- "movl %1, %%eax\n"
- "je 1f\n"
- "movl %6, %%edx\n"
- "call %7\n"
-#if DATA_SIZE == 1
- "movsbl %%al, %0\n"
-#elif DATA_SIZE == 2
- "movswl %%ax, %0\n"
-#else
-#error unsupported size
-#endif
- "jmp 2f\n"
- "1:\n"
- "addl 12(%%edx), %%eax\n"
-#if DATA_SIZE == 1
- "movsbl (%%eax), %0\n"
-#elif DATA_SIZE == 2
- "movswl (%%eax), %0\n"
-#else
-#error unsupported size
-#endif
- "2:\n"
- : "=r" (res)
- : "r" (ptr),
- "i" ((CPU_TLB_SIZE - 1) << CPU_TLB_ENTRY_BITS),
- "i" (TARGET_PAGE_BITS - CPU_TLB_ENTRY_BITS),
- "i" (TARGET_PAGE_MASK | (DATA_SIZE - 1)),
- "m" (*(uint32_t *)offsetof(CPUState, tlb_table[CPU_MMU_INDEX][0].addr_read)),
- "i" (CPU_MMU_INDEX),
- "m" (*(uint8_t *)&glue(glue(__ld, SUFFIX), MMUSUFFIX))
- : "%eax", "%ecx", "%edx", "memory", "cc");
- return res;
-}
-#endif
-
-static inline void glue(glue(st, SUFFIX), MEMSUFFIX)(target_ulong ptr, RES_TYPE v)
-{
- asm volatile ("movl %0, %%edx\n"
- "movl %0, %%eax\n"
- "shrl %3, %%edx\n"
- "andl %4, %%eax\n"
- "andl %2, %%edx\n"
- "leal %5(%%edx, %%ebp), %%edx\n"
- "cmpl (%%edx), %%eax\n"
- "movl %0, %%eax\n"
- "je 1f\n"
-#if DATA_SIZE == 1
- "movzbl %b1, %%edx\n"
-#elif DATA_SIZE == 2
- "movzwl %w1, %%edx\n"
-#elif DATA_SIZE == 4
- "movl %1, %%edx\n"
-#else
-#error unsupported size
-#endif
- "movl %6, %%ecx\n"
- "call %7\n"
- "jmp 2f\n"
- "1:\n"
- "addl 8(%%edx), %%eax\n"
-#if DATA_SIZE == 1
- "movb %b1, (%%eax)\n"
-#elif DATA_SIZE == 2
- "movw %w1, (%%eax)\n"
-#elif DATA_SIZE == 4
- "movl %1, (%%eax)\n"
-#else
-#error unsupported size
-#endif
- "2:\n"
- :
- : "r" (ptr),
-#if DATA_SIZE == 1
- "q" (v),
-#else
- "r" (v),
-#endif
- "i" ((CPU_TLB_SIZE - 1) << CPU_TLB_ENTRY_BITS),
- "i" (TARGET_PAGE_BITS - CPU_TLB_ENTRY_BITS),
- "i" (TARGET_PAGE_MASK | (DATA_SIZE - 1)),
- "m" (*(uint32_t *)offsetof(CPUState, tlb_table[CPU_MMU_INDEX][0].addr_write)),
- "i" (CPU_MMU_INDEX),
- "m" (*(uint8_t *)&glue(glue(__st, SUFFIX), MMUSUFFIX))
- : "%eax", "%ecx", "%edx", "memory", "cc");
-}
-
-#else
-
/* generic load/store macros */
static inline RES_TYPE glue(glue(ld, USUFFIX), MEMSUFFIX)(target_ulong ptr)
@@ -284,8 +140,6 @@ static inline void glue(glue(st, SUFFIX), MEMSUFFIX)(target_ulong ptr, RES_TYPE
#endif /* ACCESS_TYPE != (NB_MMU_MODES + 1) */
-#endif /* !asm */
-
#if ACCESS_TYPE != (NB_MMU_MODES + 1)
#if DATA_SIZE == 8
next reply other threads:[~2009-07-12 19:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-12 19:09 Stuart Brady [this message]
2009-07-13 0:08 ` [Qemu-devel] [PATCH] Remove dead i386 assembly code from softmmu_header.h Stuart Brady
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090712190940.GA8452@miranda.arrow \
--to=sdbrady@ntlworld.com \
--cc=qemu-devel@nongnu.org \
--cc=stuart.brady@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).