From: Bique Alexandre <alexandre.bique@citrix.com>
To: "qemu-devel@nongnu.org" <qemu-devel@nongnu.org>
Subject: [Qemu-devel] [PATCH 3/4] ATAPI pass through v3
Date: Thu, 6 Aug 2009 16:49:24 +0100 [thread overview]
Message-ID: <200908061649.24972.alexandre.bique@citrix.com> (raw)
In-Reply-To: <200908061640.39895.alexandre.bique@citrix.com>
[-- Attachment #1: Type: text/plain, Size: 44 bytes --]
Updates ATAPI defines.
--
Alexandre Bique
[-- Attachment #2: atapi-defines --]
[-- Type: text/x-patch, Size: 6743 bytes --]
diff --git a/hw/ide.c b/hw/ide.c
index 063f08d..34cdd93 100644
--- a/hw/ide.c
+++ b/hw/ide.c
@@ -216,13 +216,17 @@
#define ATAPI_PACKET_SIZE 12
-/* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+/*********************************************************************
+ * Generic Packet commands, MMC commands, and such
+ *********************************************************************/
+
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
#define GPCMD_BLANK 0xa1
#define GPCMD_CLOSE_TRACK 0x5b
#define GPCMD_FLUSH_CACHE 0x35
#define GPCMD_FORMAT_UNIT 0x04
-#define GPCMD_GET_CONFIGURATION 0x46
+#define GPCMD_GET_CONFIGURATION 0x46
#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
#define GPCMD_GET_PERFORMANCE 0xac
#define GPCMD_INQUIRY 0x12
@@ -238,6 +242,8 @@
#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
#define GPCMD_READ_10 0x28
#define GPCMD_READ_12 0xa8
+#define GPCMD_READ_BUFFER 0x3c
+#define GPCMD_READ_BUFFER_CAPACITY 0x5c
#define GPCMD_READ_CDVD_CAPACITY 0x25
#define GPCMD_READ_CD 0xbe
#define GPCMD_READ_CD_MSF 0xb9
@@ -246,15 +252,16 @@
#define GPCMD_READ_FORMAT_CAPACITIES 0x23
#define GPCMD_READ_HEADER 0x44
#define GPCMD_READ_TRACK_RZONE_INFO 0x52
-#define GPCMD_READ_SUBCHANNEL 0x42
-#define GPCMD_READ_TOC_PMA_ATIP 0x43
+#define GPCMD_READ_SUBCHANNEL 0x42
+#define GPCMD_READ_TOC_PMA_ATIP 0x43
#define GPCMD_REPAIR_RZONE_TRACK 0x58
#define GPCMD_REPORT_KEY 0xa4
#define GPCMD_REQUEST_SENSE 0x03
#define GPCMD_RESERVE_RZONE_TRACK 0x53
+#define GPCMD_SEND_CUE_SHEET 0x5d
#define GPCMD_SCAN 0xba
#define GPCMD_SEEK 0x2b
-#define GPCMD_SEND_DVD_STRUCTURE 0xad
+#define GPCMD_SEND_DVD_STRUCTURE 0xbf
#define GPCMD_SEND_EVENT 0xa2
#define GPCMD_SEND_KEY 0xa3
#define GPCMD_SEND_OPC 0x54
@@ -263,9 +270,11 @@
#define GPCMD_START_STOP_UNIT 0x1b
#define GPCMD_STOP_PLAY_SCAN 0x4e
#define GPCMD_TEST_UNIT_READY 0x00
-#define GPCMD_VERIFY_10 0x2f
+#define GPCMD_VERIFY_10 0x2f
#define GPCMD_WRITE_10 0x2a
+#define GPCMD_WRITE_12 0xaa
#define GPCMD_WRITE_AND_VERIFY_10 0x2e
+#define GPCMD_WRITE_BUFFER 0x3b
/* This is listed as optional in ATAPI 2.6, but is (curiously)
* missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
* Table 377 as an MMC command for SCSi devices though... Most ATAPI
@@ -279,18 +288,20 @@
* older drives only.
*/
#define GPCMD_GET_MEDIA_STATUS 0xda
-#define GPCMD_MODE_SENSE_6 0x1a
+#define GPCMD_MODE_SENSE_6 0x1a
/* Mode page codes for mode sense/set */
+#define GPMODE_VENDOR_PAGE 0x00
#define GPMODE_R_W_ERROR_PAGE 0x01
#define GPMODE_WRITE_PARMS_PAGE 0x05
+#define GPMODE_WCACHING_PAGE 0x08
#define GPMODE_AUDIO_CTL_PAGE 0x0e
#define GPMODE_POWER_PAGE 0x1a
#define GPMODE_FAULT_FAIL_PAGE 0x1c
#define GPMODE_TO_PROTECT_PAGE 0x1d
#define GPMODE_CAPABILITIES_PAGE 0x2a
#define GPMODE_ALL_PAGES 0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
* of MODE_SENSE_POWER_PAGE */
#define GPMODE_CDROM_PAGE 0x0d
@@ -304,10 +315,26 @@
*/
/* Some generally useful CD-ROM information */
-#define CD_MINS 80 /* max. minutes per CD */
-#define CD_SECS 60 /* seconds per minute */
-#define CD_FRAMES 75 /* frames per second */
-#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
+#define CD_MINS 80 /* max. minutes per CD */
+#define CD_SECS 60 /* seconds per minute */
+#define CD_FRAMES 75 /* frames per second */
+#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */
+#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */
+#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */
+#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */
+#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */
+#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */
+#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */
+#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */
+#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */
+#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */
+#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
+#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */
+#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */
+/* most drives don't deliver everything: */
+#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
+#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
+
#define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
#define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
@@ -346,12 +373,15 @@
#define MMC_PROFILE_HDDVD_RW_DL 0x005A
#define MMC_PROFILE_INVALID 0xFFFF
+
#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
#define ATAPI_INT_REASON_REL 0x04
#define ATAPI_INT_REASON_TAG 0xf8
/* same constants as bochs */
+#define ASC_NONE 0x00
+#define ASC_READ_ERROR 0x11
#define ASC_ILLEGAL_OPCODE 0x20
#define ASC_LOGICAL_BLOCK_OOR 0x21
#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
@@ -367,10 +397,23 @@
#define CFA_INVALID_ADDRESS 0x21
#define CFA_ADDRESS_OVERFLOW 0x2f
-#define SENSE_NONE 0
-#define SENSE_NOT_READY 2
-#define SENSE_ILLEGAL_REQUEST 5
-#define SENSE_UNIT_ATTENTION 6
+/* Sense keys */
+#define SENSE_NONE 0
+#define SENSE_RECOVERED_ERROR 1
+#define SENSE_NOT_READY 2
+#define SENSE_MEDIUM_ERROR 3
+#define SENSE_HARDWARE_ERROR 4
+#define SENSE_ILLEGAL_REQUEST 5
+#define SENSE_UNIT_ATTENTION 6
+#define SENSE_DATA_PROTECT 7
+#define SENSE_BLANK_CHECK 8
+#define SENSE_VENDOR_SPECIFIC 9
+#define SENSE_COPY_ABORTED 10
+#define SENSE_ABORTED_COMMAND 11
+#define SENSE_VOLUME_OVERFLOW 13
+#define SENSE_MISCOMPARE 14
+
+#define IO_BUFFER_MAX_SIZE (IDE_DMA_BUF_SECTORS * 512 + 4)
struct IDEState;
next prev parent reply other threads:[~2009-08-06 15:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-06 15:40 [Qemu-devel] [PATCH] ATAPI pass through v3 Bique Alexandre
2009-08-06 15:47 ` [Qemu-devel] [PATCH 1/4] " Bique Alexandre
2009-08-06 16:08 ` Christoph Hellwig
2009-08-06 15:48 ` [Qemu-devel] [PATCH 2/4] " Bique Alexandre
2009-08-06 16:09 ` Christoph Hellwig
2009-08-06 15:49 ` Bique Alexandre [this message]
2009-08-06 16:12 ` [Qemu-devel] [PATCH 3/4] " Christoph Hellwig
2009-08-06 16:17 ` Bique Alexandre
2009-08-07 15:49 ` [Qemu-devel] " Juan Quintela
2009-08-06 15:50 ` [Qemu-devel] [PATCH 4/4] " Bique Alexandre
2009-08-06 16:23 ` Christoph Hellwig
2009-08-06 17:49 ` Bique Alexandre
[not found] ` <m34osj8v77.fsf@neno.mitica>
2009-08-07 16:34 ` [Qemu-devel] " Bique Alexandre
[not found] ` <m3ws5f7et3.fsf@neno.mitica>
2009-08-07 17:10 ` Bique Alexandre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200908061649.24972.alexandre.bique@citrix.com \
--to=alexandre.bique@citrix.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).