qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] Re: [PATCH 10/25] pci: introduce FMT_pcibus for printf format for pcibus_t.
Date: Sun, 4 Oct 2009 11:46:17 +0200	[thread overview]
Message-ID: <20091004094617.GA16887@redhat.com> (raw)
In-Reply-To: <1254514577-11896-11-git-send-email-yamahata@valinux.co.jp>

On Sat, Oct 03, 2009 at 05:16:02AM +0900, Isaku Yamahata wrote:
> This patch is preliminary for 64bit BAR.
> Later pcibus_t will be changed from uint32_t to uint64_t.
> Introduce FMT_pcibus for printf format for pcibus_t.
> 
> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>

I think that macros should be all-uppercase.

> ---
>  hw/e1000.c        |    6 ++++--
>  hw/eepro100.c     |    6 ++++--
>  hw/pci.c          |   17 +++++++++++------
>  hw/pci.h          |    1 +
>  hw/pcnet.c        |    5 +++--
>  hw/wdt_i6300esb.c |    3 ++-
>  6 files changed, 25 insertions(+), 13 deletions(-)
> 
> diff --git a/hw/e1000.c b/hw/e1000.c
> index c07eb42..cb88f7a 100644
> --- a/hw/e1000.c
> +++ b/hw/e1000.c
> @@ -145,7 +145,8 @@ static void
>  ioport_map(PCIDevice *pci_dev, int region_num, pcibus_t addr,
>             pcibus_t size, int type)
>  {
> -    DBGOUT(IO, "e1000_ioport_map addr=0x%04x size=0x%08x\n", addr, size);
> +    DBGOUT(IO, "e1000_ioport_map addr=0x%04"FMT_pcibus" size=0x%08"FMT_pcibus"\n",
> +           addr, size);
>  }
>  
>  static void
> @@ -1040,7 +1041,8 @@ e1000_mmio_map(PCIDevice *pci_dev, int region_num,
>      };
>  
>  
> -    DBGOUT(MMIO, "e1000_mmio_map addr=0x%08x 0x%08x\n", addr, size);
> +    DBGOUT(MMIO, "e1000_mmio_map addr=0x%08"FMT_pcibus" 0x%08"FMT_pcibus"\n",
> +           addr, size);
>  
>      cpu_register_physical_memory(addr, PNPMMIO_SIZE, d->mmio_index);
>      qemu_register_coalesced_mmio(addr, excluded_regs[0]);
> diff --git a/hw/eepro100.c b/hw/eepro100.c
> index 1a1a0da..e54b129 100644
> --- a/hw/eepro100.c
> +++ b/hw/eepro100.c
> @@ -1378,7 +1378,8 @@ static void pci_map(PCIDevice * pci_dev, int region_num,
>  {
>      EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
>  
> -    TRACE(OTHER, logout("region %d, addr=0x%08x, size=0x%08x, type=%d\n",
> +    TRACE(OTHER, logout("region %d, addr=0x%08"FMT_pcibus", "
> +          "size=0x%08"FMT_pcibus", type=%d\n",
>            region_num, addr, size, type));
>  
>      assert(region_num == 1);
> @@ -1457,7 +1458,8 @@ static void pci_mmio_map(PCIDevice * pci_dev, int region_num,
>  {
>      EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
>  
> -    TRACE(OTHER, logout("region %d, addr=0x%08x, size=0x%08x, type=%d\n",
> +    TRACE(OTHER, logout("region %d, addr=0x%08"FMT_pcibus", "
> +          "size=0x%08"FMT_pcibus", type=%d\n",
>            region_num, addr, size, type));
>  
>      if (region_num == 0) {
> diff --git a/hw/pci.c b/hw/pci.c
> index 674daba..510fad2 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -408,7 +408,7 @@ void pci_register_bar(PCIDevice *pci_dev, int region_num,
>  
>      if (size & (size-1)) {
>          fprintf(stderr, "ERROR: PCI region size must be pow2 "
> -                    "type=0x%x, size=0x%x\n", type, size);
> +                    "type=0x%x, size=0x%"FMT_pcibus"\n", type, size);
>          exit(1);
>      }
>  
> @@ -427,7 +427,7 @@ void pci_register_bar(PCIDevice *pci_dev, int region_num,
>          addr = 0x10 + region_num * 4;
>      }
>      pci_set_long(pci_dev->config + addr, type);
> -    pci_set_long(pci_dev->wmask + addr, wmask);
> +    pci_set_long(pci_dev->wmask + addr, wmask & 0xffffffff);
>      pci_set_long(pci_dev->cmask + addr, 0xffffffff);
>  }
>  
> @@ -473,7 +473,11 @@ static void pci_update_mappings(PCIDevice *d)
>                         mappings, we handle specific values as invalid
>                         mappings. */
>                      if (last_addr <= new_addr || new_addr == 0 ||
> -                        last_addr == PCI_BAR_UNMAPPED) {
> +                        last_addr == PCI_BAR_UNMAPPED ||
> +
> +                        /* keep old behaviour
> +                         * without this, PC ide doesn't work well. */
> +                        last_addr >= UINT32_MAX) {
>                          new_addr = PCI_BAR_UNMAPPED;
>                      }
>                  } else {
> @@ -729,10 +733,10 @@ static void pci_info_device(PCIDevice *d)
>          if (r->size != 0) {
>              monitor_printf(mon, "      BAR%d: ", i);
>              if (r->type & PCI_ADDRESS_SPACE_IO) {
> -                monitor_printf(mon, "I/O at 0x%04x [0x%04x].\n",
> +                monitor_printf(mon, "I/O at 0x%04"FMT_pcibus" [0x%04"FMT_pcibus"].\n",
>                                 r->addr, r->addr + r->size - 1);
>              } else {
> -                monitor_printf(mon, "32 bit memory at 0x%08x [0x%08x].\n",
> +                monitor_printf(mon, "32 bit memory at 0x%08"FMT_pcibus" [0x%08"FMT_pcibus"].\n",
>                                 r->addr, r->addr + r->size - 1);
>              }
>          }
> @@ -1047,7 +1051,8 @@ static void pcibus_dev_print(Monitor *mon, DeviceState *dev, int indent)
>          r = &d->io_regions[i];
>          if (!r->size)
>              continue;
> -        monitor_printf(mon, "%*sbar %d: %s at 0x%x [0x%x]\n", indent, "",
> +        monitor_printf(mon, "%*sbar %d: %s at 0x%"FMT_pcibus" [0x%"FMT_pcibus"]\n",
> +                       indent, "",
>                         i, r->type & PCI_ADDRESS_SPACE_IO ? "i/o" : "mem",
>                         r->addr, r->addr + r->size - 1);
>      }
> diff --git a/hw/pci.h b/hw/pci.h
> index 8e46aba..d75b3b3 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -72,6 +72,7 @@ extern target_phys_addr_t pci_mem_base;
>  #define PCI_DEVICE_ID_VIRTIO_CONSOLE     0x1003
>  
>  typedef uint32_t pcibus_t;
> +#define FMT_pcibus                      PRIx32
>  
>  typedef void PCIConfigWriteFunc(PCIDevice *pci_dev,
>                                  uint32_t address, uint32_t data, int len);
> diff --git a/hw/pcnet.c b/hw/pcnet.c
> index 2789574..0af9a9f 100644
> --- a/hw/pcnet.c
> +++ b/hw/pcnet.c
> @@ -1766,7 +1766,8 @@ static void pcnet_ioport_map(PCIDevice *pci_dev, int region_num,
>      PCNetState *d = &DO_UPCAST(PCIPCNetState, pci_dev, pci_dev)->state;
>  
>  #ifdef PCNET_DEBUG_IO
> -    printf("pcnet_ioport_map addr=0x%04x size=0x%04x\n", addr, size);
> +    printf("pcnet_ioport_map addr=0x%04"FMT_pcibus" size=0x%04"FMT_pcibus"\n",
> +           addr, size);
>  #endif
>  
>      register_ioport_write(addr, 16, 1, pcnet_aprom_writeb, d);
> @@ -1994,7 +1995,7 @@ static void pcnet_mmio_map(PCIDevice *pci_dev, int region_num,
>      PCIPCNetState *d = DO_UPCAST(PCIPCNetState, pci_dev, pci_dev);
>  
>  #ifdef PCNET_DEBUG_IO
> -    printf("pcnet_mmio_map addr=0x%08x 0x%08x\n", addr, size);
> +    printf("pcnet_mmio_map addr=0x%08"FMT_pcibus" 0x%08"FMT_pcibus"\n", addr, size);
>  #endif
>  
>      cpu_register_physical_memory(addr, PCNET_PNPMMIO_SIZE, d->state.mmio_index);
> diff --git a/hw/wdt_i6300esb.c b/hw/wdt_i6300esb.c
> index d3ab3c8..93e657b 100644
> --- a/hw/wdt_i6300esb.c
> +++ b/hw/wdt_i6300esb.c
> @@ -362,7 +362,8 @@ static void i6300esb_map(PCIDevice *dev, int region_num,
>      I6300State *d = DO_UPCAST(I6300State, dev, dev);
>      int io_mem;
>  
> -    i6300esb_debug("addr = %x, size = %x, type = %d\n", addr, size, type);
> +    i6300esb_debug("addr = %"FMT_pcibus", size = %"FMT_pcibus", type = %d\n",
> +                   addr, size, type);
>  
>      io_mem = cpu_register_io_memory(mem_read, mem_write, d);
>      cpu_register_physical_memory (addr, 0x10, io_mem);
> -- 
> 1.6.0.2
> 
> 

  reply	other threads:[~2009-10-04  9:48 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-02 20:15 [Qemu-devel] [PATCH 00/25] pci: various pci clean up and pci express support. V3 Isaku Yamahata
2009-10-02 20:15 ` [Qemu-devel] [PATCH 01/25] pci: fix PCI_DPRINTF() wrt variadic macro Isaku Yamahata
2009-10-02 20:15 ` [Qemu-devel] [PATCH 02/25] pci: use appropriate PRIs in PCI_DPRINTF() for portability Isaku Yamahata
2009-10-04  9:51   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05  9:30     ` Isaku Yamahata
2009-10-05  9:56       ` Michael S. Tsirkin
2009-10-02 20:15 ` [Qemu-devel] [PATCH 03/25] pci: introduce constant PCI_NUM_PINS for the number of interrupt pins, 4 Isaku Yamahata
2009-10-04 10:04   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05  9:32     ` Isaku Yamahata
2009-10-02 20:15 ` [Qemu-devel] [PATCH 04/25] pci: use the symbolic constant, PCI_ROM_ADDRESS_ENABLE instead of 1 Isaku Yamahata
2009-10-04 10:06   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-02 20:15 ` [Qemu-devel] [PATCH 05/25] pci: use PCI_SLOT() and PCI_FUNC() Isaku Yamahata
2009-10-04 10:02   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-02 20:15 ` [Qemu-devel] [PATCH 06/25] pci: define a constant to represent a unmapped bar and use it Isaku Yamahata
2009-10-04 10:04   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-02 20:15 ` [Qemu-devel] [PATCH 07/25] pci: helper functions to access PCIDevice::config Isaku Yamahata
2009-10-04  9:48   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-02 20:16 ` [Qemu-devel] [PATCH 08/25] pci: use helper functions to access pci config space Isaku Yamahata
2009-10-04  9:47   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-02 20:16 ` [Qemu-devel] [PATCH 09/25] pci: introduce pcibus_t to represent pci bus address/size instead of uint32_t Isaku Yamahata
2009-10-04 10:06   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-02 20:16 ` [Qemu-devel] [PATCH 10/25] pci: introduce FMT_pcibus for printf format for pcibus_t Isaku Yamahata
2009-10-04  9:46   ` Michael S. Tsirkin [this message]
2009-10-02 20:16 ` [Qemu-devel] [PATCH 11/25] pci: typedef pcibus_t as uint64_t instead of uint32_t Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 12/25] pci: 64bit bar support Isaku Yamahata
2009-10-04 10:26   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05  9:45     ` Isaku Yamahata
2009-10-05 10:08       ` Michael S. Tsirkin
2009-10-05 10:26         ` Isaku Yamahata
2009-10-05 11:04           ` Michael S. Tsirkin
2009-10-02 20:16 ` [Qemu-devel] [PATCH 13/25] pci: make pci configuration transaction more accurate Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 14/25] pci: factor out the logic to get pci device from address Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 15/25] pci_host.h: split non-inline static function in pci_host.h into pci_host.c Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 16/25] pci: pcie host and mmcfg support Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 17/25] pci: fix pci_default_write_config() Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 18/25] pci: add helper functions for pci config write function Isaku Yamahata
2009-10-04 10:30   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-02 20:16 ` [Qemu-devel] [PATCH 19/25] pci: use helper function in pci_default_write_config() Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 20/25] pci: factor out config update logic Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 21/25] pci: make bar update function aware of pci bridge Isaku Yamahata
2009-10-04 10:53   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05  9:47     ` Isaku Yamahata
2009-10-05 10:10       ` Michael S. Tsirkin
2009-10-02 20:16 ` [Qemu-devel] [PATCH 22/25] pci/brdige: qdevfy and initialize secondary bus and subordinate bus Isaku Yamahata
2009-10-04 11:04   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05  9:51     ` Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 23/25] pci: add helper function to initialize wmask Isaku Yamahata
2009-10-04 11:05   ` [Qemu-devel] " Michael S. Tsirkin
2009-10-02 20:16 ` [Qemu-devel] [PATCH 24/25] pci: initialize wmask according to pci header type Isaku Yamahata
2009-10-02 20:16 ` [Qemu-devel] [PATCH 25/25] pci/monitor: print out bridge's filtering values and so on Isaku Yamahata
2009-10-04 11:10   ` [Qemu-devel] " Michael S. Tsirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091004094617.GA16887@redhat.com \
    --to=mst@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=yamahata@valinux.co.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).