From: "Michael S. Tsirkin" <mst@redhat.com>
To: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: qemu-devel@nongnu.org
Subject: [Qemu-devel] Re: [PATCH 10/23] pci: introduce FMT_PCIBUS for printf format for pcibus_t.
Date: Mon, 5 Oct 2009 15:41:02 +0200 [thread overview]
Message-ID: <20091005134100.GB31056@redhat.com> (raw)
In-Reply-To: <1254737223-16129-11-git-send-email-yamahata@valinux.co.jp>
On Mon, Oct 05, 2009 at 07:06:50PM +0900, Isaku Yamahata wrote:
> This patch is preliminary for 64bit BAR.
> Later pcibus_t will be changed from uint32_t to uint64_t.
> Introduce FMT_PCIBUS for printf format for pcibus_t.
>
> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
> ---
> hw/e1000.c | 6 ++++--
> hw/eepro100.c | 6 ++++--
> hw/pci.c | 11 ++++++-----
> hw/pci.h | 1 +
> hw/pcnet.c | 5 +++--
> hw/wdt_i6300esb.c | 3 ++-
> 6 files changed, 20 insertions(+), 12 deletions(-)
>
> diff --git a/hw/e1000.c b/hw/e1000.c
> index c07eb42..8721e0e 100644
> --- a/hw/e1000.c
> +++ b/hw/e1000.c
> @@ -145,7 +145,8 @@ static void
> ioport_map(PCIDevice *pci_dev, int region_num, pcibus_t addr,
> pcibus_t size, int type)
> {
> - DBGOUT(IO, "e1000_ioport_map addr=0x%04x size=0x%08x\n", addr, size);
> + DBGOUT(IO, "e1000_ioport_map addr=0x%04"FMT_PCIBUS" size=0x%08"FMT_PCIBUS"\n",
This line is now too long.
> + addr, size);
> }
>
> static void
> @@ -1040,7 +1041,8 @@ e1000_mmio_map(PCIDevice *pci_dev, int region_num,
> };
>
>
> - DBGOUT(MMIO, "e1000_mmio_map addr=0x%08x 0x%08x\n", addr, size);
> + DBGOUT(MMIO, "e1000_mmio_map addr=0x%08"FMT_PCIBUS" 0x%08"FMT_PCIBUS"\n",
same
> + addr, size);
>
> cpu_register_physical_memory(addr, PNPMMIO_SIZE, d->mmio_index);
> qemu_register_coalesced_mmio(addr, excluded_regs[0]);
> diff --git a/hw/eepro100.c b/hw/eepro100.c
> index 1a1a0da..52bfb1f 100644
> --- a/hw/eepro100.c
> +++ b/hw/eepro100.c
> @@ -1378,7 +1378,8 @@ static void pci_map(PCIDevice * pci_dev, int region_num,
> {
> EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
>
> - TRACE(OTHER, logout("region %d, addr=0x%08x, size=0x%08x, type=%d\n",
> + TRACE(OTHER, logout("region %d, addr=0x%08"FMT_PCIBUS", "
> + "size=0x%08"FMT_PCIBUS", type=%d\n",
> region_num, addr, size, type));
>
> assert(region_num == 1);
> @@ -1457,7 +1458,8 @@ static void pci_mmio_map(PCIDevice * pci_dev, int region_num,
> {
> EEPRO100State *s = DO_UPCAST(EEPRO100State, dev, pci_dev);
>
> - TRACE(OTHER, logout("region %d, addr=0x%08x, size=0x%08x, type=%d\n",
> + TRACE(OTHER, logout("region %d, addr=0x%08"FMT_PCIBUS", "
> + "size=0x%08"FMT_PCIBUS", type=%d\n",
> region_num, addr, size, type));
>
> if (region_num == 0) {
> diff --git a/hw/pci.c b/hw/pci.c
> index 674daba..8d6e8ea 100644
> --- a/hw/pci.c
> +++ b/hw/pci.c
> @@ -408,7 +408,7 @@ void pci_register_bar(PCIDevice *pci_dev, int region_num,
>
> if (size & (size-1)) {
> fprintf(stderr, "ERROR: PCI region size must be pow2 "
> - "type=0x%x, size=0x%x\n", type, size);
> + "type=0x%x, size=0x%"FMT_PCIBUS"\n", type, size);
> exit(1);
> }
>
> @@ -427,7 +427,7 @@ void pci_register_bar(PCIDevice *pci_dev, int region_num,
> addr = 0x10 + region_num * 4;
> }
> pci_set_long(pci_dev->config + addr, type);
> - pci_set_long(pci_dev->wmask + addr, wmask);
> + pci_set_long(pci_dev->wmask + addr, wmask & 0xffffffff);
> pci_set_long(pci_dev->cmask + addr, 0xffffffff);
> }
>
> @@ -729,10 +729,10 @@ static void pci_info_device(PCIDevice *d)
> if (r->size != 0) {
> monitor_printf(mon, " BAR%d: ", i);
> if (r->type & PCI_ADDRESS_SPACE_IO) {
> - monitor_printf(mon, "I/O at 0x%04x [0x%04x].\n",
> + monitor_printf(mon, "I/O at 0x%04"FMT_PCIBUS" [0x%04"FMT_PCIBUS"].\n",
> r->addr, r->addr + r->size - 1);
> } else {
> - monitor_printf(mon, "32 bit memory at 0x%08x [0x%08x].\n",
> + monitor_printf(mon, "32 bit memory at 0x%08"FMT_PCIBUS" [0x%08"FMT_PCIBUS"].\n",
same
> r->addr, r->addr + r->size - 1);
> }
> }
> @@ -1047,7 +1047,8 @@ static void pcibus_dev_print(Monitor *mon, DeviceState *dev, int indent)
> r = &d->io_regions[i];
> if (!r->size)
> continue;
> - monitor_printf(mon, "%*sbar %d: %s at 0x%x [0x%x]\n", indent, "",
> + monitor_printf(mon, "%*sbar %d: %s at 0x%"FMT_PCIBUS" [0x%"FMT_PCIBUS"]\n",
same
> + indent, "",
> i, r->type & PCI_ADDRESS_SPACE_IO ? "i/o" : "mem",
> r->addr, r->addr + r->size - 1);
> }
> diff --git a/hw/pci.h b/hw/pci.h
> index 2796c1d..359fce1 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -72,6 +72,7 @@ extern target_phys_addr_t pci_mem_base;
> #define PCI_DEVICE_ID_VIRTIO_CONSOLE 0x1003
>
> typedef uint32_t pcibus_t;
> +#define FMT_PCIBUS PRIx32
>
> typedef void PCIConfigWriteFunc(PCIDevice *pci_dev,
> uint32_t address, uint32_t data, int len);
> diff --git a/hw/pcnet.c b/hw/pcnet.c
> index 2789574..b4d85a5 100644
> --- a/hw/pcnet.c
> +++ b/hw/pcnet.c
> @@ -1766,7 +1766,8 @@ static void pcnet_ioport_map(PCIDevice *pci_dev, int region_num,
> PCNetState *d = &DO_UPCAST(PCIPCNetState, pci_dev, pci_dev)->state;
>
> #ifdef PCNET_DEBUG_IO
> - printf("pcnet_ioport_map addr=0x%04x size=0x%04x\n", addr, size);
> + printf("pcnet_ioport_map addr=0x%04"FMT_PCIBUS" size=0x%04"FMT_PCIBUS"\n",
> + addr, size);
> #endif
>
> register_ioport_write(addr, 16, 1, pcnet_aprom_writeb, d);
> @@ -1994,7 +1995,7 @@ static void pcnet_mmio_map(PCIDevice *pci_dev, int region_num,
> PCIPCNetState *d = DO_UPCAST(PCIPCNetState, pci_dev, pci_dev);
>
> #ifdef PCNET_DEBUG_IO
> - printf("pcnet_mmio_map addr=0x%08x 0x%08x\n", addr, size);
> + printf("pcnet_mmio_map addr=0x%08"FMT_PCIBUS" 0x%08"FMT_PCIBUS"\n", addr, size);
same
> #endif
>
> cpu_register_physical_memory(addr, PCNET_PNPMMIO_SIZE, d->state.mmio_index);
> diff --git a/hw/wdt_i6300esb.c b/hw/wdt_i6300esb.c
> index d3ab3c8..88450a8 100644
> --- a/hw/wdt_i6300esb.c
> +++ b/hw/wdt_i6300esb.c
> @@ -362,7 +362,8 @@ static void i6300esb_map(PCIDevice *dev, int region_num,
> I6300State *d = DO_UPCAST(I6300State, dev, dev);
> int io_mem;
>
> - i6300esb_debug("addr = %x, size = %x, type = %d\n", addr, size, type);
> + i6300esb_debug("addr = %"FMT_PCIBUS", size = %"FMT_PCIBUS", type = %d\n",
> + addr, size, type);
>
> io_mem = cpu_register_io_memory(mem_read, mem_write, d);
> cpu_register_physical_memory (addr, 0x10, io_mem);
> --
> 1.6.0.2
next prev parent reply other threads:[~2009-10-05 13:43 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-05 10:06 [Qemu-devel] [PATCH v4 00/23] pci: various pci clean up and pci express support Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 01/23] pci: fix PCI_DPRINTF() wrt variadic macro Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 02/23] pci: use appropriate PRIs in PCI_DPRINTF() for portability Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 03/23] pci: introduce constant PCI_NUM_PINS for the number of interrupt pins, 4 Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 04/23] pci: use the symbolic constant, PCI_ROM_ADDRESS_ENABLE instead of 1 Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 05/23] pci: use PCI_SLOT() and PCI_FUNC() Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 06/23] pci: define a constant to represent a unmapped bar and use it Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 07/23] pci: helper functions to access PCIDevice::config Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 08/23] pci: use helper functions to access pci config space Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 09/23] pci: introduce pcibus_t to represent pci bus address/size instead of uint32_t Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 10/23] pci: introduce FMT_PCIBUS for printf format for pcibus_t Isaku Yamahata
2009-10-05 13:41 ` Michael S. Tsirkin [this message]
2009-10-05 10:06 ` [Qemu-devel] [PATCH 11/23] pci: typedef pcibus_t as uint64_t instead of uint32_t Isaku Yamahata
2009-10-05 20:18 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05 10:06 ` [Qemu-devel] [PATCH 12/23] pci: 64bit bar support Isaku Yamahata
2009-10-05 12:06 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-06 9:38 ` Isaku Yamahata
2009-10-06 9:43 ` Michael S. Tsirkin
2009-10-05 12:47 ` Michael S. Tsirkin
2009-10-06 9:42 ` Isaku Yamahata
2009-10-06 9:47 ` Michael S. Tsirkin
2009-10-05 10:06 ` [Qemu-devel] [PATCH 13/23] pci: make pci configuration transaction more accurate Isaku Yamahata
2009-10-05 12:26 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05 10:06 ` [Qemu-devel] [PATCH 14/23] pci: factor out the logic to get pci device from address Isaku Yamahata
2009-10-05 12:45 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-06 9:50 ` Isaku Yamahata
2009-10-06 10:23 ` Michael S. Tsirkin
2009-10-05 10:06 ` [Qemu-devel] [PATCH 15/23] pci_host.h: split non-inline static function in pci_host.h into pci_host.c Isaku Yamahata
2009-10-05 14:35 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05 14:37 ` Michael S. Tsirkin
2009-10-05 10:06 ` [Qemu-devel] [PATCH 16/23] pci: pcie host and mmcfg support Isaku Yamahata
2009-10-05 11:01 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-06 8:48 ` Isaku Yamahata
2009-10-06 9:30 ` Michael S. Tsirkin
2009-10-05 11:41 ` Michael S. Tsirkin
2009-10-06 10:02 ` Isaku Yamahata
2009-10-06 10:57 ` Michael S. Tsirkin
2009-10-06 13:21 ` Michael S. Tsirkin
2009-10-07 2:25 ` Isaku Yamahata
2009-10-07 12:17 ` Michael S. Tsirkin
2009-10-07 11:30 ` Akio Takebe
2009-10-05 10:06 ` [Qemu-devel] [PATCH 17/23] pci: fix pci_default_write_config() Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 18/23] pci: add helper functions for pci config write function Isaku Yamahata
2009-10-05 10:06 ` [Qemu-devel] [PATCH 19/23] pci: use helper function in pci_default_write_config() Isaku Yamahata
2009-10-05 10:07 ` [Qemu-devel] [PATCH 20/23] pci: make bar update function aware of pci bridge Isaku Yamahata
2009-10-05 11:59 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-09 3:27 ` Isaku Yamahata
2009-10-10 20:20 ` Michael S. Tsirkin
2009-10-13 15:14 ` Isaku Yamahata
2009-10-13 15:22 ` Michael S. Tsirkin
2009-10-05 10:07 ` [Qemu-devel] [PATCH 21/23] pci/brdige: qdevfy and initialize secondary bus and subordinate bus Isaku Yamahata
2009-10-05 13:49 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05 14:58 ` Michael S. Tsirkin
2009-10-05 10:07 ` [Qemu-devel] [PATCH 22/23] pci: initialize wmask according to pci header type Isaku Yamahata
2009-10-05 14:09 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05 10:07 ` [Qemu-devel] [PATCH 23/23] pci/monitor: print out bridge's filtering values and so on Isaku Yamahata
2009-10-05 14:24 ` [Qemu-devel] " Michael S. Tsirkin
2009-10-05 10:14 ` [Qemu-devel] Re: [PATCH v4 00/23] pci: various pci clean up and pci express support Michael S. Tsirkin
2009-10-05 13:34 ` Michael S. Tsirkin
2009-10-07 2:30 ` Isaku Yamahata
2009-10-06 14:40 ` Michael S. Tsirkin
2009-10-07 2:29 ` Isaku Yamahata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091005134100.GB31056@redhat.com \
--to=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=yamahata@valinux.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).