qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: juha.riihimaki@nokia.com
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v2 05/10] target-arm: optimize arm load/store multiple ops
Date: Tue, 27 Oct 2009 09:39:42 +0100	[thread overview]
Message-ID: <20091027083942.GA4399@hall.aurel32.net> (raw)
In-Reply-To: <1256386749-85299-6-git-send-email-juha.riihimaki@nokia.com>

On Sat, Oct 24, 2009 at 03:19:04PM +0300, juha.riihimaki@nokia.com wrote:
> From: Juha Riihimäki <juha.riihimaki@nokia.com>
> 
> RM load/store multiple instructions can be slightly optimized by
> loading the register offset constant into a variable outside the
> register loop and using the preloaded variable inside the loop instead
> of reloading the offset value to a temporary variable on each loop
> iteration. This causes less TCG ops to be generated for a ARM load/
> store multiple instruction if there are more than one register
> accessed, otherwise the number of generated TCG ops is the same.
> 
> Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
> Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>

This patch breaks, the boot of an arm kernel, as tmp2 is used elsewhere
within this code path.

OTOH, while it reduce the number of TCG ops, that should not impact the
generated host asm code, as most (all ?) targets are able to add a
small constant value to a register in one instruction.

> diff --git a/target-arm/translate.c b/target-arm/translate.c
> index 38fb833..d1e2ed2 100644
> --- a/target-arm/translate.c
> +++ b/target-arm/translate.c
> @@ -6852,6 +6852,7 @@ static void disas_arm_insn(CPUState * env, DisasContext *s)
>                  }
>                  rn = (insn >> 16) & 0xf;
>                  addr = load_reg(s, rn);
> +                tmp2 = tcg_const_i32(4);
>  
>                  /* compute total size */
>                  loaded_base = 0;
> @@ -6865,7 +6866,7 @@ static void disas_arm_insn(CPUState * env, DisasContext *s)
>                  if (insn & (1 << 23)) {
>                      if (insn & (1 << 24)) {
>                          /* pre increment */
> -                        tcg_gen_addi_i32(addr, addr, 4);
> +                        tcg_gen_add_i32(addr, addr, tmp2);
>                      } else {
>                          /* post increment */
>                      }
> @@ -6918,7 +6919,7 @@ static void disas_arm_insn(CPUState * env, DisasContext *s)
>                          j++;
>                          /* no need to add after the last transfer */
>                          if (j != n)
> -                            tcg_gen_addi_i32(addr, addr, 4);
> +                            tcg_gen_add_i32(addr, addr, tmp2);
>                      }
>                  }
>                  if (insn & (1 << 21)) {
> @@ -6928,7 +6929,7 @@ static void disas_arm_insn(CPUState * env, DisasContext *s)
>                              /* pre increment */
>                          } else {
>                              /* post increment */
> -                            tcg_gen_addi_i32(addr, addr, 4);
> +                            tcg_gen_add_i32(addr, addr, tmp2);
>                          }
>                      } else {
>                          if (insn & (1 << 24)) {
> @@ -6944,6 +6945,7 @@ static void disas_arm_insn(CPUState * env, DisasContext *s)
>                  } else {
>                      dead_tmp(addr);
>                  }
> +                tcg_temp_free_i32(tmp2);
>                  if (loaded_base) {
>                      store_reg(s, rn, loaded_var);
>                  }
> -- 
> 1.6.5
> 
> 
> 

-- 
Aurelien Jarno	                        GPG: 1024D/F1BCDB73
aurelien@aurel32.net                 http://www.aurel32.net

  reply	other threads:[~2009-10-27  8:39 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-24 12:18 [Qemu-devel] [PATCH v2 00/10] target-arm: miscellaneous fixes juha.riihimaki
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 01/10] target-arm: fix neon vshrn/vrshrn ops juha.riihimaki
2009-10-25 10:58   ` Laurent Desnogues
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 02/10] target-arm: add support for neon vld1.64/vst1.64 instructions juha.riihimaki
2009-10-25 11:11   ` Laurent Desnogues
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 03/10] target-arm: allow modifying vfp fpexc en bit only juha.riihimaki
2009-10-25 12:23   ` Laurent Desnogues
2009-10-26  7:32     ` Juha.Riihimaki
2009-10-26  9:08       ` Laurent Desnogues
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 04/10] target-arm: optimize vfp load/store multiple ops juha.riihimaki
2009-10-24 17:36   ` Laurent Desnogues
2009-10-27  8:42   ` Aurelien Jarno
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 05/10] target-arm: optimize arm " juha.riihimaki
2009-10-27  8:39   ` Aurelien Jarno [this message]
2009-10-27  8:48     ` Juha.Riihimaki
2009-10-27  9:00       ` Aurelien Jarno
2009-10-27  9:05         ` Juha.Riihimaki
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 06/10] target-arm: fix neon vsri, vshl and vsli ops juha.riihimaki
2009-10-24 17:44   ` Laurent Desnogues
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 07/10] target-arm: optimize thumb2 load/store multiple ops juha.riihimaki
2009-10-24 17:32   ` Laurent Desnogues
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 08/10] target-arm: optimize thumb push/pop ops juha.riihimaki
2009-10-24 17:34   ` Laurent Desnogues
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 09/10] target-arm: optimize neon vld/vst ops juha.riihimaki
2009-10-25 14:01   ` Laurent Desnogues
2009-10-26  7:46     ` Juha.Riihimaki
2009-10-26  9:11       ` Laurent Desnogues
2009-10-26 21:05         ` Aurelien Jarno
2009-10-29 13:45           ` Juha.Riihimaki
2009-10-29 13:52             ` Laurent Desnogues
2009-10-24 12:19 ` [Qemu-devel] [PATCH v2 10/10] target-arm: fix neon shift helper functions juha.riihimaki
2009-10-25 12:16   ` Laurent Desnogues
2009-10-25 19:17 ` [Qemu-devel] [PATCH v2 00/10] target-arm: miscellaneous fixes Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091027083942.GA4399@hall.aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=juha.riihimaki@nokia.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).