From: "Daniel P. Berrange" <berrange@redhat.com>
To: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Cc: "qemu-devel@nongnu.org" <qemu-devel@nongnu.org>
Subject: Re: [Qemu-devel] [ANNOUNCE][Call-For-Testing] Release 0.12.0-rc1 of QEMU
Date: Mon, 7 Dec 2009 18:34:32 +0000 [thread overview]
Message-ID: <20091207183432.GW24530@redhat.com> (raw)
In-Reply-To: <4B1C3377.1020509@linux.vnet.ibm.com>
On Sun, Dec 06, 2009 at 04:43:03PM -0600, Anthony Liguori wrote:
>
> It can be downloaded from Savannah at:
>
> http://download.savannah.gnu.org/releases/qemu/qemu-0.12.0-rc1.tar.gz
>
> Please send testing feedback (positive or negative) to qemu-devel and
> file bugs against the release candidate at:
A couple of hotplug issues with the old monitor
It crashes with an assertion failure when hot-plugging without ACPI enabled.
Previously this worked, but that was perhaps just by luck rather than
design.
$ /home/berrange/usr/qemu-git/bin/qemu -monitor stdio -no-acpi
QEMU 0.11.50 monitor - type 'help' for more information
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
qemu: /home/berrange/src/external/qemu/hw/qdev.c:109: qdev_create: Assertion `bus->allow_hotplug' failed.
Aborted (core dumped)
It will also abort when you attempt to add the 28th extra device, but this
isn't a regression - it has always crashed & burned this way.
$ /home/berrange/usr/qemu-git/bin/qemu -monitor stdio
QEMU 0.11.50 monitor - type 'help' for more information
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 4, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 5, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 6, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 7, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 8, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 9, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 10, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 11, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 12, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 13, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 14, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 15, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 16, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 17, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 18, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 19, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 20, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 21, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 22, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 23, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 24, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 25, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 26, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 27, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 28, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 29, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 30, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
OK domain 0, bus 0, slot 31, function 0
(qemu) pci_add pci_addr=auto storage file=/home/berrange/mcdboot.img,if=virtio
qemu: hardware error: PCI: no devfn available for virtio-blk-pci, all in use
CPU #0:
EAX=000f4242 EBX=00000040 ECX=00000042 EDX=0000428b
ESI=0000000f EDI=00004240 EBP=00006f3e ESP=00006f0a
EIP=0000a8c9 EFL=00000246 [---Z-P-] CPL=0 II=0 A20=1 SMM=0 HLT=1
ES =0040 00000400 0000ffff 00009300
CS =f000 000f0000 0000ffff 00009b0f
SS =0000 00000000 0000ffff 00009300
DS =0000 00000000 0000ffff 00009300
FS =0000 00000000 0000ffff 00009300
GS =0000 00000000 0000ffff 00009300
LDT=0000 00000000 0000ffff 00008200
TR =0000 00000000 0000ffff 00008b00
GDT= 000fcbb0 00000037
IDT= 00000000 000003ff
CR0=00000010 CR2=00000000 CR3=00000000 CR4=00000000
DR0=00000000 DR1=00000000 DR2=00000000 DR3=00000000
DR6=ffff0ff0 DR7=00000400
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000000000000000000000000000 XMM01=00000000000000000000000000000000
XMM02=00000000000000000000000000000000 XMM03=00000000000000000000000000000000
XMM04=00000000000000000000000000000000 XMM05=00000000000000000000000000000000
XMM06=00000000000000000000000000000000 XMM07=00000000000000000000000000000000
Aborted (core dumped)
In both cases though I'd expect an error to be returned to the monitor
client not an assertion failure
Regards,
Daniel
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
next prev parent reply other threads:[~2009-12-07 18:34 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-06 22:43 [Qemu-devel] [ANNOUNCE][Call-For-Testing] Release 0.12.0-rc1 of QEMU Anthony Liguori
2009-12-07 12:49 ` Luiz Capitulino
2009-12-07 13:45 ` Anthony Liguori
2009-12-07 13:59 ` Luiz Capitulino
2009-12-07 14:30 ` [Qemu-devel] " Michael S. Tsirkin
2009-12-07 14:36 ` Anthony Liguori
2009-12-07 14:45 ` Michael S. Tsirkin
2009-12-07 14:56 ` Anthony Liguori
2009-12-07 18:34 ` Daniel P. Berrange [this message]
2009-12-07 19:43 ` [Qemu-devel] " Anthony Liguori
2009-12-07 20:25 ` Daniel P. Berrange
2009-12-08 10:40 ` Gerd Hoffmann
2009-12-08 10:52 ` Daniel P. Berrange
2009-12-08 12:52 ` Gerd Hoffmann
2009-12-08 13:07 ` Gerd Hoffmann
2009-12-09 10:21 ` Daniel P. Berrange
2009-12-07 20:18 ` [Qemu-devel] [PULL] pci compliance fixes Michael S. Tsirkin
2009-12-09 10:27 ` [Qemu-devel] [ANNOUNCE][Call-For-Testing] Release 0.12.0-rc1 of QEMU Ian Molton
2009-12-09 16:56 ` Daniel P. Berrange
2009-12-10 9:22 ` Gerd Hoffmann
2009-12-10 12:16 ` Daniel P. Berrange
-- strict thread matches above, loose matches on Subject: below --
2009-12-14 14:06 Anthony Liguori
2009-12-14 16:08 ` Artyom Tarasenko
2009-12-14 16:20 ` Anthony Liguori
2009-12-14 16:56 ` Blue Swirl
2009-12-14 17:00 ` Avi Kivity
2009-12-14 17:28 ` Anthony Liguori
2009-12-16 3:19 ` Ryan Harper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091207183432.GW24530@redhat.com \
--to=berrange@redhat.com \
--cc=aliguori@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).