[Qemu-devel] Re: [PATCH 11/20] eepro100: Use symbolic names for bits in EEPROM id

["Michael S. Tsirkin" <mst@redhat.com>]

On Sun, Feb 14, 2010 at 05:16:20PM +0100, Stefan Weil wrote:
> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
> ---
>  hw/eepro100.c |   17 ++++++++++++++++-
>  1 files changed, 16 insertions(+), 1 deletions(-)
> 
> diff --git a/hw/eepro100.c b/hw/eepro100.c
> index c647322..01bcd6d 100644
> --- a/hw/eepro100.c
> +++ b/hw/eepro100.c
> @@ -272,6 +272,21 @@ typedef enum {
>      eeprom_smbus_addr = 0x90,
>  } EEPROMOffset;
>  
> +/* Bit values for EEPROM ID word. */
> +typedef enum {
> +    eeprom_id_mdm = BIT(0),     /* Modem */
> +    eeprom_id_stb = BIT(1),     /* Standby Enable */
> +    eeprom_id_wmr = BIT(2),     /* ??? */
> +    eeprom_id_wol = BIT(5),     /* Wake on LAN */
> +    eeprom_id_dpd = BIT(6),     /* Deep Power Down */
> +    eeprom_id_alt = BIT(7),     /* */
> +    /* BITS(10, 8) device revision */
> +    eeprom_id_bd = BIT(11),     /* boot disable */
> +    eeprom_id_id = BIT(13),     /* id bit */
> +    /* BITS(15, 14) signature */
> +    eeprom_id_valid = BIT(14),  /* signature for valid eeprom */
> +} eeprom_id_bit;

The type name is unused - don't add it?
Can constants be upper case?


> +
>  /* Default values for MDI (PHY) registers */
>  static const uint16_t eepro100_mdi_default[] = {
>      /* MDI Registers 0 - 6, 7 */
> @@ -643,7 +658,7 @@ static void nic_selective_reset(EEPRO100State * s)
>      uint16_t *eeprom_contents = eeprom93xx_data(s->eeprom);
>      //~ eeprom93xx_reset(s->eeprom);
>      memcpy(eeprom_contents, s->conf.macaddr.a, 6);
> -    eeprom_contents[eeprom_id] = 0x4000;
> +    eeprom_contents[eeprom_id] = eeprom_id_valid;
>      if (s->device == i82557B || s->device == i82557C)
>          eeprom_contents[5] = 0x0100;
>      eeprom_contents[eeprom_phy_id] = 1;
> -- 
> 1.6.6.1
> 
>