[Qemu-devel] [PATCH 1/4] megasas: Add more controller property definitions

[hare@suse.de (Hannes Reinecke)]

The megaraid_sas driver has some more controller property defintions.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 hw/mfi.h |   41 +++++++++++++++++++++++++++++++++++++++--
 1 files changed, 39 insertions(+), 2 deletions(-)

diff --git a/hw/mfi.h b/hw/mfi.h
index f3c82e0..312563e 100644
--- a/hw/mfi.h
+++ b/hw/mfi.h
@@ -508,7 +508,7 @@ struct mfi_init_qinfo {
 	uint32_t	ci_addr_hi;
 } __attribute__ ((packed));
 
-/* SAS (?) controller properties, part of mfi_ctrl_info */
+/* Controller properties */
 struct mfi_ctrl_props {
 	uint16_t	seq_num;
 	uint16_t	pred_fail_poll_interval;
@@ -531,7 +531,44 @@ struct mfi_ctrl_props {
 	uint16_t	ecc_bucket_leak_rate;
 	uint8_t		restore_hotspare_on_insertion;
 	uint8_t		expose_encl_devices;
-	uint8_t		reserved[38];
+	uint8_t		maintainPdFailHistory;
+	uint8_t		disallowHostRequestReordering;
+	uint8_t		abortCCOnError;
+	uint8_t		loadBalanceMode;
+	uint8_t		disableAutoDetectBackplane;
+	uint8_t		snapVDSpace;
+	struct {
+		uint32_t	copyBackDisabled	: 1;     // set TRUE to disable copyBack (0=copback enabled)
+		uint32_t	SMARTerEnabled		: 1;
+		uint32_t	prCorrectUnconfiguredAreas  : 1;
+		uint32_t	useFdeOnly		: 1;
+		uint32_t	disableNCQ		: 1;
+		uint32_t	SSDSMARTerEnabled	: 1;
+		uint32_t	SSDPatrolReadEnabled	: 1;
+		uint32_t	enableSpinDownUnconfigured  : 1;
+		uint32_t	autoEnhancedImport	: 1;
+		uint32_t	enableSecretKeyControl	: 1;
+		uint32_t	disableOnlineCtrlReset	: 1;
+		uint32_t	allowBootWithPinnedCache : 1;
+		uint32_t	disableSpinDownHS	: 1;
+		uint32_t	enableJBOD		: 1;
+		uint32_t	reserved		:18;
+	} OnOffProperties;
+	uint8_t		autoSnapVDSpace; /* % of source LD to be
+					  * reserved for auto snapshot
+					  * in snapshot repository, for
+					  * metadata and user data
+					  * 1=5%, 2=10%, 3=15% and so on
+					  */
+	uint8_t		viewSpace;	 /* snapshot writeable VIEWs
+					  * capacity as a % of source LD
+					  * capacity. 0=READ only
+					  * 1=5%, 2=10%, 3=15% and so on
+					  */
+	uint16_t	spinDownTime;	 /* # of idle minutes before device
+					  * is spun down (0=use FW defaults)
+					  */
+	uint8_t		reserved[24];
 } __attribute__ ((packed));
 
 /* PCI information about the card. */
-- 
1.6.0.2