From: Aurelien Jarno <aurelien@aurel32.net>
To: Richard Henderson <rth@twiddle.net>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 22/22] tcg-i386: Tidy data16 prefixes.
Date: Fri, 21 May 2010 11:45:34 +0200 [thread overview]
Message-ID: <20100521094534.GN1950@volta.aurel32.net> (raw)
In-Reply-To: <3db58a6cdca2ce330bd61a8959270fb9671f4ffc.1272479073.git.rth@twiddle.net>
On Wed, Apr 28, 2010 at 11:23:19AM -0700, Richard Henderson wrote:
> Include it in the opcode as an extension, as with P_EXT
> or the REX bits in the x86-64 port.
>
> Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
> ---
> tcg/i386/tcg-target.c | 21 +++++++++++++--------
> 1 files changed, 13 insertions(+), 8 deletions(-)
>
> diff --git a/tcg/i386/tcg-target.c b/tcg/i386/tcg-target.c
> index 646a7b6..2f096fa 100644
> --- a/tcg/i386/tcg-target.c
> +++ b/tcg/i386/tcg-target.c
> @@ -161,7 +161,8 @@ static inline int tcg_target_const_match(tcg_target_long val,
> return 0;
> }
>
> -#define P_EXT 0x100 /* 0x0f opcode prefix */
> +#define P_EXT 0x100 /* 0x0f opcode prefix */
> +#define P_DATA16 0x200 /* 0x66 opcode prefix */
>
> #define OPC_ARITH_EvIz (0x81)
> #define OPC_ARITH_EvIb (0x83)
> @@ -267,8 +268,12 @@ static const uint8_t tcg_cond_to_jcc[10] = {
>
> static inline void tcg_out_opc(TCGContext *s, int opc)
> {
> - if (opc & P_EXT)
> + if (opc & P_DATA16) {
> + tcg_out8(s, 0x66);
> + }
> + if (opc & P_EXT) {
> tcg_out8(s, 0x0f);
> + }
> tcg_out8(s, opc);
> }
>
> @@ -460,8 +465,8 @@ static inline void tcg_out_bswap32(TCGContext *s, int reg)
>
> static inline void tcg_out_rolw_8(TCGContext *s, int reg)
> {
> - tcg_out8(s, 0x66);
> - tcg_out_shifti(s, SHIFT_ROL, reg, 8);
> + tcg_out_modrm(s, OPC_SHIFT_Ib | P_DATA16, SHIFT_ROL, reg);
> + tcg_out8(s, 8);
> }
>
> static inline void tgen_arithi(TCGContext *s, int c, int r0,
> @@ -1074,8 +1079,8 @@ static void tcg_out_qemu_st(TCGContext *s, const TCGArg *args,
> data_reg = r1;
> }
> /* movw */
> - tcg_out8(s, 0x66);
> - tcg_out_modrm_offset(s, OPC_MOVL_EvGv, data_reg, r0, GUEST_BASE);
> + tcg_out_modrm_offset(s, OPC_MOVL_EvGv | P_DATA16,
> + data_reg, r0, GUEST_BASE);
> break;
> case 2:
> if (bswap) {
> @@ -1180,8 +1185,8 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
> break;
> case INDEX_op_st16_i32:
> /* movw */
> - tcg_out8(s, 0x66);
> - tcg_out_modrm_offset(s, OPC_MOVL_EvGv, args[0], args[1], args[2]);
> + tcg_out_modrm_offset(s, OPC_MOVL_EvGv | P_DATA16,
> + args[0], args[1], args[2]);
> break;
> case INDEX_op_st_i32:
> tcg_out_st(s, TCG_TYPE_I32, args[0], args[1], args[2]);
> --
> 1.6.6.1
>
>
>
>
--
Aurelien Jarno GPG: 1024D/F1BCDB73
aurelien@aurel32.net http://www.aurel32.net
next prev parent reply other threads:[~2010-05-21 9:47 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-28 18:24 [Qemu-devel] [PATCH 00/22] tcg-i386 cleanup and improvement, v2 Richard Henderson
2010-04-13 22:23 ` [Qemu-devel] [PATCH 01/22] tcg-i386: Allocate call-saved registers first Richard Henderson
2010-05-19 6:46 ` Aurelien Jarno
2010-04-13 22:26 ` [Qemu-devel] [PATCH 02/22] tcg-i386: Tidy initialization of tcg_target_call_clobber_regs Richard Henderson
2010-05-19 6:46 ` Aurelien Jarno
2010-04-13 22:59 ` [Qemu-devel] [PATCH 03/22] tcg-i386: Tidy ext8u and ext16u operations Richard Henderson
2010-05-19 6:47 ` Aurelien Jarno
2010-05-19 18:31 ` Richard Henderson
2010-05-20 13:39 ` Aurelien Jarno
2010-05-20 14:04 ` Aurelien Jarno
2010-05-20 14:40 ` Richard Henderson
2010-05-20 18:50 ` Aurelien Jarno
2010-04-13 23:13 ` [Qemu-devel] [PATCH 04/22] tcg-i386: Tidy ext8s and ext16s operations Richard Henderson
2010-05-20 18:52 ` Aurelien Jarno
2010-04-14 14:58 ` [Qemu-devel] [PATCH 07/22] tcg-i386: Tidy move operations Richard Henderson
2010-04-14 15:06 ` [Qemu-devel] [PATCH 08/22] tcg-i386: Eliminate extra move from qemu_ld64 Richard Henderson
2010-04-14 15:26 ` [Qemu-devel] [PATCH 09/22] tcg-i386: Tidy jumps Richard Henderson
2010-04-14 15:38 ` [Qemu-devel] [PATCH 10/22] tcg-i386: Tidy immediate arithmetic operations Richard Henderson
2010-05-21 9:38 ` Aurelien Jarno
2010-04-14 17:16 ` [Qemu-devel] [PATCH 11/22] tcg-i386: Tidy non-immediate " Richard Henderson
2010-05-21 9:38 ` Aurelien Jarno
2010-04-14 17:20 ` [Qemu-devel] [PATCH 12/22] tcg-i386: Tidy movi Richard Henderson
2010-05-21 9:38 ` Aurelien Jarno
2010-04-14 17:59 ` [Qemu-devel] [PATCH 13/22] tcg-i386: Tidy push/pop Richard Henderson
2010-05-21 9:38 ` Aurelien Jarno
2010-04-14 18:02 ` [Qemu-devel] [PATCH 14/22] tcg-i386: Tidy calls Richard Henderson
2010-05-21 9:40 ` Aurelien Jarno
2010-04-14 18:04 ` [Qemu-devel] [PATCH 15/22] tcg-i386: Tidy ret Richard Henderson
2010-05-21 9:40 ` Aurelien Jarno
2010-04-14 18:07 ` [Qemu-devel] [PATCH 16/22] tcg-i386: Tidy setcc Richard Henderson
2010-05-21 9:40 ` Aurelien Jarno
2010-04-14 18:22 ` [Qemu-devel] [PATCH 17/22] tcg-i386: Tidy unary arithmetic Richard Henderson
2010-05-21 9:41 ` Aurelien Jarno
2010-04-14 18:29 ` [Qemu-devel] [PATCH 18/22] tcg-i386: Tidy multiply Richard Henderson
2010-05-21 9:41 ` Aurelien Jarno
2010-04-14 18:32 ` [Qemu-devel] [PATCH 19/22] tcg-i386: Tidy xchg Richard Henderson
2010-05-21 9:42 ` Aurelien Jarno
2010-04-14 19:08 ` [Qemu-devel] [PATCH 20/22] tcg-i386: Tidy lea Richard Henderson
2010-05-21 9:43 ` Aurelien Jarno
2010-04-14 20:29 ` [Qemu-devel] [PATCH 21/22] tcg-i386: Use lea for three-operand add Richard Henderson
2010-05-21 9:44 ` Aurelien Jarno
2010-04-28 17:31 ` [Qemu-devel] [PATCH 05/22] tcg-i386: Tidy bswap operations Richard Henderson
2010-04-28 17:38 ` [Qemu-devel] [PATCH 06/22] tcg-i386: Tidy shift operations Richard Henderson
2010-04-28 18:23 ` [Qemu-devel] [PATCH 22/22] tcg-i386: Tidy data16 prefixes Richard Henderson
2010-05-21 9:45 ` Aurelien Jarno [this message]
2010-05-17 18:26 ` [Qemu-devel] [PATCH 00/22] tcg-i386 cleanup and improvement, v2 Richard Henderson
2010-05-17 19:54 ` Aurelien Jarno
2010-05-21 9:46 ` Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100521094534.GN1950@volta.aurel32.net \
--to=aurelien@aurel32.net \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).