[Qemu-devel] [PATCH 0/2] sparc64: cleanups

[Qemu-devel] [PATCH 0/2] sparc64: cleanups

[Igor V. Kovalenko]

- rename sun4u cpu to Ultrasparc IIi
- cleanup pci bridge map (requires openbios change)

v0->v1: split out rename of sun4u cpu to separate patch

---

Igor V. Kovalenko (2):
      sparc64: rename sun4u cpu to Ultrasparc IIi
      sparc64: clean up pci bridge map


 hw/apb_pci.c |   49 ++++++++++++++++++++++++++-----------------------
 hw/sun4u.c   |    6 +++---
 2 files changed, 29 insertions(+), 26 deletions(-)

-- 

[Qemu-devel] [PATCH 1/2] sparc64: rename sun4u cpu to Ultrasparc IIi

[Igor V. Kovalenko]

From: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>

Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
---
 hw/sun4u.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/hw/sun4u.c b/hw/sun4u.c
index e9a1e23..1e92900 100644
--- a/hw/sun4u.c
+++ b/hw/sun4u.c
@@ -859,7 +859,7 @@ enum {
 static const struct hwdef hwdefs[] = {
     /* Sun4u generic PC-like machine */
     {
-        .default_cpu_model = "TI UltraSparc II",
+        .default_cpu_model = "TI UltraSparc IIi",
         .machine_id = sun4u_id,
         .prom_addr = 0x1fff0000000ULL,
         .console_serial_base = 0,

[Qemu-devel] [PATCH 2/2] sparc64: clean up pci bridge map

[Igor V. Kovalenko]

From: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>

- remove unused host state and store pci bus pointer only
- do not map host state access into unused 1fe.10000000 range
- reorder pci region registration
- assign pci i/o region to isa_mem_base

Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
---
 hw/apb_pci.c |   49 ++++++++++++++++++++++++++-----------------------
 hw/sun4u.c   |    4 ++--
 2 files changed, 28 insertions(+), 25 deletions(-)

diff --git a/hw/apb_pci.c b/hw/apb_pci.c
index 65d8ba6..b53e3c3 100644
--- a/hw/apb_pci.c
+++ b/hw/apb_pci.c
@@ -65,7 +65,7 @@ do { printf("APB: " fmt , ## __VA_ARGS__); } while (0)
 
 typedef struct APBState {
     SysBusDevice busdev;
-    PCIHostState host_state;
+    PCIBus      *bus;
     ReadWriteHandler pci_config_handler;
     uint32_t iommu[4];
     uint32_t pci_control[16];
@@ -191,7 +191,7 @@ static void apb_pci_config_write(ReadWriteHandler *h, pcibus_t addr,
 
     val = qemu_bswap_len(val, size);
     APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %x\n", __func__, addr, val);
-    pci_data_write(s->host_state.bus, addr, val, size);
+    pci_data_write(s->bus, addr, val, size);
 }
 
 static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
@@ -200,7 +200,7 @@ static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
     uint32_t ret;
     APBState *s = container_of(h, APBState, pci_config_handler);
 
-    ret = pci_data_read(s->host_state.bus, addr, size);
+    ret = pci_data_read(s->bus, addr, size);
     ret = qemu_bswap_len(ret, size);
     APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, ret);
     return ret;
@@ -331,37 +331,37 @@ PCIBus *pci_apb_init(target_phys_addr_t special_base,
     s = sysbus_from_qdev(dev);
     /* apb_config */
     sysbus_mmio_map(s, 0, special_base);
+    /* PCI configuration space */
+    sysbus_mmio_map(s, 1, special_base + 0x1000000ULL);
     /* pci_ioport */
-    sysbus_mmio_map(s, 1, special_base + 0x2000000ULL);
-    /* pci_config */
-    sysbus_mmio_map(s, 2, special_base + 0x1000000ULL);
-    /* mem_data */
-    sysbus_mmio_map(s, 3, mem_base);
+    sysbus_mmio_map(s, 2, special_base + 0x2000000ULL);
     d = FROM_SYSBUS(APBState, s);
-    d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci",
+
+    d->bus = pci_register_bus(&d->busdev.qdev, "pci",
                                          pci_apb_set_irq, pci_pbm_map_irq, d,
                                          0, 32);
-    pci_bus_set_mem_base(d->host_state.bus, mem_base);
+    pci_bus_set_mem_base(d->bus, mem_base);
 
     for (i = 0; i < 32; i++) {
         sysbus_connect_irq(s, i, pic[i]);
     }
 
-    pci_create_simple(d->host_state.bus, 0, "pbm");
+    pci_create_simple(d->bus, 0, "pbm");
+
     /* APB secondary busses */
-    *bus2 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 0),
+    *bus2 = pci_bridge_init(d->bus, PCI_DEVFN(1, 0),
                             PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
                             pci_apb_map_irq,
                             "Advanced PCI Bus secondary bridge 1");
     apb_pci_bridge_init(*bus2);
 
-    *bus3 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 1),
+    *bus3 = pci_bridge_init(d->bus, PCI_DEVFN(1, 1),
                             PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
                             pci_apb_map_irq,
                             "Advanced PCI Bus secondary bridge 2");
     apb_pci_bridge_init(*bus3);
 
-    return d->host_state.bus;
+    return d->bus;
 }
 
 static void pci_pbm_reset(DeviceState *d)
@@ -382,7 +382,7 @@ static void pci_pbm_reset(DeviceState *d)
 static int pci_pbm_init_device(SysBusDevice *dev)
 {
     APBState *s;
-    int pci_mem_data, apb_config, pci_ioport, pci_config;
+    int pci_config, apb_config, pci_ioport;
     unsigned int i;
 
     s = FROM_SYSBUS(APBState, dev);
@@ -396,20 +396,23 @@ static int pci_pbm_init_device(SysBusDevice *dev)
     /* apb_config */
     apb_config = cpu_register_io_memory(apb_config_read,
                                         apb_config_write, s);
+    /* at region 0 */
     sysbus_init_mmio(dev, 0x10000ULL, apb_config);
-    /* pci_ioport */
-    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
-                                          pci_apb_iowrite, s);
-    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
-    /* pci_config */
+
+    /* PCI configuration space */
     s->pci_config_handler.read = apb_pci_config_read;
     s->pci_config_handler.write = apb_pci_config_write;
     pci_config = cpu_register_io_memory_simple(&s->pci_config_handler);
     assert(pci_config >= 0);
+    /* at region 1 */
     sysbus_init_mmio(dev, 0x1000000ULL, pci_config);
-    /* mem_data */
-    pci_mem_data = pci_host_data_register_mmio(&s->host_state, 1);
-    sysbus_init_mmio(dev, 0x10000000ULL, pci_mem_data);
+
+    /* pci_ioport */
+    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
+                                        pci_apb_iowrite, s);
+    /* at region 2 */
+    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
+
     return 0;
 }
 
diff --git a/hw/sun4u.c b/hw/sun4u.c
index 1e92900..40b5f1f 100644
--- a/hw/sun4u.c
+++ b/hw/sun4u.c
@@ -70,7 +70,7 @@
 #define PROM_VADDR           0x000ffd00000ULL
 #define APB_SPECIAL_BASE     0x1fe00000000ULL
 #define APB_MEM_BASE         0x1ff00000000ULL
-#define VGA_BASE             (APB_MEM_BASE + 0x400000ULL)
+#define APB_PCI_IO_BASE      (APB_SPECIAL_BASE + 0x02000000ULL)
 #define PROM_FILENAME        "openbios-sparc64"
 #define NVRAM_SIZE           0x2000
 #define MAX_IDE_BUS          2
@@ -766,7 +766,7 @@ static void sun4uv_init(ram_addr_t RAM_size,
     irq = qemu_allocate_irqs(cpu_set_irq, env, MAX_PILS);
     pci_bus = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE, irq, &pci_bus2,
                            &pci_bus3);
-    isa_mem_base = VGA_BASE;
+    isa_mem_base = APB_PCI_IO_BASE;
     pci_vga_init(pci_bus, 0, 0);
 
     // XXX Should be pci_bus3

Re: [Qemu-devel] [PATCH 2/2] sparc64: clean up pci bridge map

[Blue Swirl]

On Tue, May 25, 2010 at 12:09 PM, Igor V. Kovalenko
<igor.v.kovalenko@gmail.com> wrote:
> From: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
>
> - remove unused host state and store pci bus pointer only
> - do not map host state access into unused 1fe.10000000 range
> - reorder pci region registration
> - assign pci i/o region to isa_mem_base

Looks good. Could you make a separate patch from the part that depends
on OpenBIOS update and another for the cleanups? I think the cleanups
could be applied quickly, but the OpenBIOS PCI changes may need more
consideration.

> Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
> ---
>  hw/apb_pci.c |   49 ++++++++++++++++++++++++++-----------------------
>  hw/sun4u.c   |    4 ++--
>  2 files changed, 28 insertions(+), 25 deletions(-)
>
> diff --git a/hw/apb_pci.c b/hw/apb_pci.c
> index 65d8ba6..b53e3c3 100644
> --- a/hw/apb_pci.c
> +++ b/hw/apb_pci.c
> @@ -65,7 +65,7 @@ do { printf("APB: " fmt , ## __VA_ARGS__); } while (0)
>
>  typedef struct APBState {
>     SysBusDevice busdev;
> -    PCIHostState host_state;
> +    PCIBus      *bus;
>     ReadWriteHandler pci_config_handler;
>     uint32_t iommu[4];
>     uint32_t pci_control[16];
> @@ -191,7 +191,7 @@ static void apb_pci_config_write(ReadWriteHandler *h, pcibus_t addr,
>
>     val = qemu_bswap_len(val, size);
>     APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %x\n", __func__, addr, val);
> -    pci_data_write(s->host_state.bus, addr, val, size);
> +    pci_data_write(s->bus, addr, val, size);
>  }
>
>  static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
> @@ -200,7 +200,7 @@ static uint32_t apb_pci_config_read(ReadWriteHandler *h, pcibus_t addr,
>     uint32_t ret;
>     APBState *s = container_of(h, APBState, pci_config_handler);
>
> -    ret = pci_data_read(s->host_state.bus, addr, size);
> +    ret = pci_data_read(s->bus, addr, size);
>     ret = qemu_bswap_len(ret, size);
>     APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, ret);
>     return ret;
> @@ -331,37 +331,37 @@ PCIBus *pci_apb_init(target_phys_addr_t special_base,
>     s = sysbus_from_qdev(dev);
>     /* apb_config */
>     sysbus_mmio_map(s, 0, special_base);
> +    /* PCI configuration space */
> +    sysbus_mmio_map(s, 1, special_base + 0x1000000ULL);
>     /* pci_ioport */
> -    sysbus_mmio_map(s, 1, special_base + 0x2000000ULL);
> -    /* pci_config */
> -    sysbus_mmio_map(s, 2, special_base + 0x1000000ULL);
> -    /* mem_data */
> -    sysbus_mmio_map(s, 3, mem_base);
> +    sysbus_mmio_map(s, 2, special_base + 0x2000000ULL);
>     d = FROM_SYSBUS(APBState, s);
> -    d->host_state.bus = pci_register_bus(&d->busdev.qdev, "pci",
> +
> +    d->bus = pci_register_bus(&d->busdev.qdev, "pci",
>                                          pci_apb_set_irq, pci_pbm_map_irq, d,
>                                          0, 32);
> -    pci_bus_set_mem_base(d->host_state.bus, mem_base);
> +    pci_bus_set_mem_base(d->bus, mem_base);
>
>     for (i = 0; i < 32; i++) {
>         sysbus_connect_irq(s, i, pic[i]);
>     }
>
> -    pci_create_simple(d->host_state.bus, 0, "pbm");
> +    pci_create_simple(d->bus, 0, "pbm");
> +
>     /* APB secondary busses */
> -    *bus2 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 0),
> +    *bus2 = pci_bridge_init(d->bus, PCI_DEVFN(1, 0),
>                             PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
>                             pci_apb_map_irq,
>                             "Advanced PCI Bus secondary bridge 1");
>     apb_pci_bridge_init(*bus2);
>
> -    *bus3 = pci_bridge_init(d->host_state.bus, PCI_DEVFN(1, 1),
> +    *bus3 = pci_bridge_init(d->bus, PCI_DEVFN(1, 1),
>                             PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_SIMBA,
>                             pci_apb_map_irq,
>                             "Advanced PCI Bus secondary bridge 2");
>     apb_pci_bridge_init(*bus3);
>
> -    return d->host_state.bus;
> +    return d->bus;
>  }
>
>  static void pci_pbm_reset(DeviceState *d)
> @@ -382,7 +382,7 @@ static void pci_pbm_reset(DeviceState *d)
>  static int pci_pbm_init_device(SysBusDevice *dev)
>  {
>     APBState *s;
> -    int pci_mem_data, apb_config, pci_ioport, pci_config;
> +    int pci_config, apb_config, pci_ioport;
>     unsigned int i;
>
>     s = FROM_SYSBUS(APBState, dev);
> @@ -396,20 +396,23 @@ static int pci_pbm_init_device(SysBusDevice *dev)
>     /* apb_config */
>     apb_config = cpu_register_io_memory(apb_config_read,
>                                         apb_config_write, s);
> +    /* at region 0 */
>     sysbus_init_mmio(dev, 0x10000ULL, apb_config);
> -    /* pci_ioport */
> -    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
> -                                          pci_apb_iowrite, s);
> -    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
> -    /* pci_config */
> +
> +    /* PCI configuration space */
>     s->pci_config_handler.read = apb_pci_config_read;
>     s->pci_config_handler.write = apb_pci_config_write;
>     pci_config = cpu_register_io_memory_simple(&s->pci_config_handler);
>     assert(pci_config >= 0);
> +    /* at region 1 */
>     sysbus_init_mmio(dev, 0x1000000ULL, pci_config);
> -    /* mem_data */
> -    pci_mem_data = pci_host_data_register_mmio(&s->host_state, 1);
> -    sysbus_init_mmio(dev, 0x10000000ULL, pci_mem_data);
> +
> +    /* pci_ioport */
> +    pci_ioport = cpu_register_io_memory(pci_apb_ioread,
> +                                        pci_apb_iowrite, s);
> +    /* at region 2 */
> +    sysbus_init_mmio(dev, 0x10000ULL, pci_ioport);
> +
>     return 0;
>  }
>
> diff --git a/hw/sun4u.c b/hw/sun4u.c
> index 1e92900..40b5f1f 100644
> --- a/hw/sun4u.c
> +++ b/hw/sun4u.c
> @@ -70,7 +70,7 @@
>  #define PROM_VADDR           0x000ffd00000ULL
>  #define APB_SPECIAL_BASE     0x1fe00000000ULL
>  #define APB_MEM_BASE         0x1ff00000000ULL
> -#define VGA_BASE             (APB_MEM_BASE + 0x400000ULL)
> +#define APB_PCI_IO_BASE      (APB_SPECIAL_BASE + 0x02000000ULL)
>  #define PROM_FILENAME        "openbios-sparc64"
>  #define NVRAM_SIZE           0x2000
>  #define MAX_IDE_BUS          2
> @@ -766,7 +766,7 @@ static void sun4uv_init(ram_addr_t RAM_size,
>     irq = qemu_allocate_irqs(cpu_set_irq, env, MAX_PILS);
>     pci_bus = pci_apb_init(APB_SPECIAL_BASE, APB_MEM_BASE, irq, &pci_bus2,
>                            &pci_bus3);
> -    isa_mem_base = VGA_BASE;
> +    isa_mem_base = APB_PCI_IO_BASE;
>     pci_vga_init(pci_bus, 0, 0);
>
>     // XXX Should be pci_bus3
>
>
>

Re: [Qemu-devel] [PATCH 2/2] sparc64: clean up pci bridge map

[Igor Kovalenko]

On Tue, May 25, 2010 at 11:24 PM, Blue Swirl <blauwirbel@gmail.com> wrote:
> On Tue, May 25, 2010 at 12:09 PM, Igor V. Kovalenko
> <igor.v.kovalenko@gmail.com> wrote:
>> From: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
>>
>> - remove unused host state and store pci bus pointer only
>> - do not map host state access into unused 1fe.10000000 range
>> - reorder pci region registration
>> - assign pci i/o region to isa_mem_base
>
> Looks good. Could you make a separate patch from the part that depends
> on OpenBIOS update and another for the cleanups? I think the cleanups
> could be applied quickly, but the OpenBIOS PCI changes may need more
> consideration.

The only real cleanup is removal of host state which becomes unusable
after mapping change. I think these changes may go in as is along with
OpenBIOS set "sparc64 cleanups v1" which supports changed address
ranges.

The PCI changes to OpenBIOS in set "encode-int related changes and pci
bus scan amendment" are separate but there is a simple dependency on
these cleanups in register mapping area.

It was probably bad idea to split OpenBIOS changes to 2 sets instead
of sending those as one series.

-- 
Kind regards,
Igor V. Kovalenko

Re: [Qemu-devel] [PATCH 0/2] sparc64: cleanups

[Blue Swirl]

Thanks, applied both.

On Tue, May 25, 2010 at 12:08 PM, Igor V. Kovalenko
<igor.v.kovalenko@gmail.com> wrote:
> - rename sun4u cpu to Ultrasparc IIi
> - cleanup pci bridge map (requires openbios change)
>
> v0->v1: split out rename of sun4u cpu to separate patch
>
> ---
>
> Igor V. Kovalenko (2):
>      sparc64: rename sun4u cpu to Ultrasparc IIi
>      sparc64: clean up pci bridge map
>
>
>  hw/apb_pci.c |   49 ++++++++++++++++++++++++++-----------------------
>  hw/sun4u.c   |    6 +++---
>  2 files changed, 29 insertions(+), 26 deletions(-)
>
> --
>
>