* [Qemu-devel] [PATCH] qemu: Enable XSAVE related CPUID
@ 2010-05-27 9:50 Sheng Yang
2010-05-27 12:56 ` [Qemu-devel] " Avi Kivity
0 siblings, 1 reply; 3+ messages in thread
From: Sheng Yang @ 2010-05-27 9:50 UTC (permalink / raw)
To: Avi Kivity, Marcelo Tosatti, Anthony Liguori; +Cc: qemu-devel, kvm, Sheng Yang
We can support it in KVM now. The initial values are the minimal requirement
of XSAVE capable processor.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
---
target-i386/cpuid.c | 32 ++++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/target-i386/cpuid.c b/target-i386/cpuid.c
index eebf038..cbf5595 100644
--- a/target-i386/cpuid.c
+++ b/target-i386/cpuid.c
@@ -1067,6 +1067,38 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
*ecx = 0;
*edx = 0;
break;
+ case 0xD:
+ /* Processor Extended State */
+ if (!(env->cpuid_ext_features & CPUID_EXT_XSAVE)) {
+ *eax = 0;
+ *ebx = 0;
+ *ecx = 0;
+ *edx = 0;
+ break;
+ }
+ if (count == 0) {
+ *eax = 0x7; /* FP | SSE | YMM */
+ *ebx = 0x340; /* FP + SSE + YMM size */
+ *ecx = 0x340; /* FP + SSE + YMM size */
+ *edx = 0;
+ } else if (count == 1) {
+ /* eax = 1, so we can continue with others */
+ *eax = 1;
+ *ebx = 0;
+ *ecx = 0;
+ *edx = 0;
+ } else if (count == 2) {
+ *eax = 0x100; /* YMM size */
+ *ebx = 0x240; /* YMM offset */
+ *ecx = 0;
+ *edx = 0;
+ } else {
+ *eax = 0;
+ *ebx = 0;
+ *ecx = 0;
+ *edx = 0;
+ }
+ break;
case 0x80000000:
*eax = env->cpuid_xlevel;
*ebx = env->cpuid_vendor1;
--
1.7.0.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [Qemu-devel] Re: [PATCH] qemu: Enable XSAVE related CPUID
2010-05-27 9:50 [Qemu-devel] [PATCH] qemu: Enable XSAVE related CPUID Sheng Yang
@ 2010-05-27 12:56 ` Avi Kivity
2010-05-27 13:55 ` Sheng Yang
0 siblings, 1 reply; 3+ messages in thread
From: Avi Kivity @ 2010-05-27 12:56 UTC (permalink / raw)
To: Sheng Yang; +Cc: Marcelo Tosatti, kvm, qemu-devel
On 05/27/2010 12:50 PM, Sheng Yang wrote:
> We can support it in KVM now. The initial values are the minimal requirement
> of XSAVE capable processor.
>
> Signed-off-by: Sheng Yang<sheng@linux.intel.com>
> ---
> target-i386/cpuid.c | 32 ++++++++++++++++++++++++++++++++
> 1 files changed, 32 insertions(+), 0 deletions(-)
>
> diff --git a/target-i386/cpuid.c b/target-i386/cpuid.c
> index eebf038..cbf5595 100644
> --- a/target-i386/cpuid.c
> +++ b/target-i386/cpuid.c
> @@ -1067,6 +1067,38 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
> *ecx = 0;
> *edx = 0;
> break;
> + case 0xD:
> + /* Processor Extended State */
> + if (!(env->cpuid_ext_features& CPUID_EXT_XSAVE)) {
> + *eax = 0;
> + *ebx = 0;
> + *ecx = 0;
> + *edx = 0;
> + break;
> + }
> + if (count == 0) {
> + *eax = 0x7; /* FP | SSE | YMM */
> + *ebx = 0x340; /* FP + SSE + YMM size */
> + *ecx = 0x340; /* FP + SSE + YMM size */
>
For -cpu host, we should pick these from KVM_GET_SUPPORTED_CPUID. For
canned cpu types (e.g. qemu64), we need to return what we always did.
We can also add a new cpu type that has them built in (there's no cpu on
the market with avx, right?)
> + *edx = 0;
> + } else if (count == 1) {
> + /* eax = 1, so we can continue with others */
> + *eax = 1;
> + *ebx = 0;
> + *ecx = 0;
> + *edx = 0;
> + } else if (count == 2) {
> + *eax = 0x100; /* YMM size */
> + *ebx = 0x240; /* YMM offset */
> + *ecx = 0;
> + *edx = 0;
>
These, too.
> + } else {
> + *eax = 0;
> + *ebx = 0;
> + *ecx = 0;
> + *edx = 0;
> + }
> + break;
> case 0x80000000:
> *eax = env->cpuid_xlevel;
> *ebx = env->cpuid_vendor1;
>
--
error compiling committee.c: too many arguments to function
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Qemu-devel] Re: [PATCH] qemu: Enable XSAVE related CPUID
2010-05-27 12:56 ` [Qemu-devel] " Avi Kivity
@ 2010-05-27 13:55 ` Sheng Yang
0 siblings, 0 replies; 3+ messages in thread
From: Sheng Yang @ 2010-05-27 13:55 UTC (permalink / raw)
To: Avi Kivity; +Cc: Marcelo Tosatti, kvm, qemu-devel
On Thursday 27 May 2010 20:56:17 Avi Kivity wrote:
> On 05/27/2010 12:50 PM, Sheng Yang wrote:
> > We can support it in KVM now. The initial values are the minimal
> > requirement of XSAVE capable processor.
> >
> > Signed-off-by: Sheng Yang<sheng@linux.intel.com>
> > ---
> >
> > target-i386/cpuid.c | 32 ++++++++++++++++++++++++++++++++
> > 1 files changed, 32 insertions(+), 0 deletions(-)
> >
> > diff --git a/target-i386/cpuid.c b/target-i386/cpuid.c
> > index eebf038..cbf5595 100644
> > --- a/target-i386/cpuid.c
> > +++ b/target-i386/cpuid.c
> > @@ -1067,6 +1067,38 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t
> > index, uint32_t count,
> >
> > *ecx = 0;
> > *edx = 0;
> > break;
> >
> > + case 0xD:
> > + /* Processor Extended State */
> > + if (!(env->cpuid_ext_features& CPUID_EXT_XSAVE)) {
> > + *eax = 0;
> > + *ebx = 0;
> > + *ecx = 0;
> > + *edx = 0;
> > + break;
> > + }
> > + if (count == 0) {
> > + *eax = 0x7; /* FP | SSE | YMM */
> > + *ebx = 0x340; /* FP + SSE + YMM size */
> > + *ecx = 0x340; /* FP + SSE + YMM size */
>
> For -cpu host, we should pick these from KVM_GET_SUPPORTED_CPUID. For
> canned cpu types (e.g. qemu64), we need to return what we always did.
Yes, I also prefer this way. didn't do this because it's somehow out of current
QEmu CPUID setting mechanism.
>
> We can also add a new cpu type that has them built in (there's no cpu on
> the market with avx, right?)
Right... Let's use -cpu host now.
>
> > + *edx = 0;
> > + } else if (count == 1) {
> > + /* eax = 1, so we can continue with others */
> > + *eax = 1;
> > + *ebx = 0;
> > + *ecx = 0;
> > + *edx = 0;
> > + } else if (count == 2) {
> > + *eax = 0x100; /* YMM size */
> > + *ebx = 0x240; /* YMM offset */
> > + *ecx = 0;
> > + *edx = 0;
>
> These, too.
Sure.
--
regards
Yang, Sheng
>
> > + } else {
> > + *eax = 0;
> > + *ebx = 0;
> > + *ecx = 0;
> > + *edx = 0;
> > + }
> > + break;
> >
> > case 0x80000000:
> > *eax = env->cpuid_xlevel;
> > *ebx = env->cpuid_vendor1;
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-05-27 13:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-27 9:50 [Qemu-devel] [PATCH] qemu: Enable XSAVE related CPUID Sheng Yang
2010-05-27 12:56 ` [Qemu-devel] " Avi Kivity
2010-05-27 13:55 ` Sheng Yang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).