[Qemu-devel] Re: [PATCH 5/5] virtio-net: Switch default to new bottom half TX handler for iothread

["Michael S. Tsirkin" <mst@redhat.com>]

On Tue, Aug 31, 2010 at 04:32:54PM -0600, Alex Williamson wrote:
> On Tue, 2010-08-31 at 23:25 +0300, Michael S. Tsirkin wrote:
> > On Fri, Aug 27, 2010 at 04:37:45PM -0600, Alex Williamson wrote:
> > > The bottom half handler shows big improvements over the timer
> > > with few downsides, default to it when the iothread is enabled.
> > > 
> > > Using the following tests, with the guest and host connected
> > > via tap+bridge:
> > > 
> > > guest> netperf -t TCP_STREAM -H $HOST
> > > host> netperf -t TCP_STREAM -H $GUEST
> > > guest> netperf -t UDP_STREAM -H $HOST
> > > host> netperf -t UDP_STREAM -H $GUEST
> > > guest> netperf -t TCP_RR -H $HOST
> > > 
> > > Results: base throughput, exits/throughput ->
> > >                    patched throughput, exits/throughput
> > > 
> > > --enable-io-thread
> > > TCP guest->host 2737.77, 47.82  -> 6767.09, 29.15 = 247%, 61%
> > > TCP host->guest 2231.33, 74.00  -> 4125.80, 67.61 = 185%, 91%
> > > UDP guest->host 6281.68, 14.66  -> 12569.27, 1.98 = 200%, 14%
> > > UDP host->guest 275.91,  289.22 -> 264.80, 293.53 = 96%, 101%
> > > interations/s   1949.65, 82.97  -> 7417.56, 84.31 = 380%, 102%
> > > 
> > > No --enable-io-thread
> > > TCP guest->host 3041.57, 55.11 -> 1038.93, 517.57 = 34%, 939%
> > > TCP host->guest 2416.03, 76.67 -> 5655.92, 55.52  = 234%, 72%
> > > UDP guest->host 12255.82, 6.11 -> 7775.87, 31.32  = 63%, 513%
> > > UDP host->guest 587.92, 245.95 -> 611.88, 239.92  = 104%, 98%
> > > interations/s   1975.59, 83.21 -> 8935.50, 88.18  = 452%, 106%
> > > 
> > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> > 
> > parameter having different settings based on config
> > options might surprise some users. I don't think
> > we really need a parameter here ...
> 
> I'm not a bit fan of this either, but I'd also prefer not to introduce a
> regression for a performance difference we know about in advance.

I agree. The comment was mainly about a parameter. If we make it a hidden
parameter (mainbe with x- prefix), this won't be an issue.

> It gets even more complicated when we factor in qemu-kvm, as it doesn't
> build with iothread enabled, but seems to get and even better boost in
> performance across the board thanks largely to the kvm-irqchip.  Should
> we instead make this a configure option?  --enable-virtio-net-txbh?

That'll work too.

> Thanks,
> 
> Alex
> 
> > > ---
> > > 
> > >  hw/s390-virtio-bus.c |    3 ++-
> > >  hw/syborg_virtio.c   |    3 ++-
> > >  hw/virtio-pci.c      |    3 ++-
> > >  hw/virtio.h          |    6 ++++++
> > >  4 files changed, 12 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/hw/s390-virtio-bus.c b/hw/s390-virtio-bus.c
> > > index 1483362..985f99a 100644
> > > --- a/hw/s390-virtio-bus.c
> > > +++ b/hw/s390-virtio-bus.c
> > > @@ -328,7 +328,8 @@ static VirtIOS390DeviceInfo s390_virtio_net = {
> > >      .qdev.size = sizeof(VirtIOS390Device),
> > >      .qdev.props = (Property[]) {
> > >          DEFINE_NIC_PROPERTIES(VirtIOS390Device, nic),
> > > -        DEFINE_PROP_UINT32("txtimer", VirtIOS390Device, txtimer, 1),
> > > +        DEFINE_PROP_UINT32("txtimer", VirtIOS390Device, txtimer,
> > > +                           TXTIMER_DEFAULT),
> > >          DEFINE_PROP_INT32("txburst", VirtIOS390Device, txburst, 256),
> > >          DEFINE_PROP_END_OF_LIST(),
> > >      },
> > > diff --git a/hw/syborg_virtio.c b/hw/syborg_virtio.c
> > > index 7b76972..ee5746d 100644
> > > --- a/hw/syborg_virtio.c
> > > +++ b/hw/syborg_virtio.c
> > > @@ -300,7 +300,8 @@ static SysBusDeviceInfo syborg_virtio_net_info = {
> > >      .qdev.props = (Property[]) {
> > >          DEFINE_NIC_PROPERTIES(SyborgVirtIOProxy, nic),
> > >          DEFINE_VIRTIO_NET_FEATURES(SyborgVirtIOProxy, host_features),
> > > -        DEFINE_PROP_UINT32("txtimer", SyborgVirtIOProxy, txtimer, 1),
> > > +        DEFINE_PROP_UINT32("txtimer", SyborgVirtIOProxy, txtimer,
> > > +                           TXTIMER_DEFAULT),
> > >          DEFINE_PROP_INT32("txburst", SyborgVirtIOProxy, txburst, 256),
> > >          DEFINE_PROP_END_OF_LIST(),
> > >      }
> > > diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
> > > index e025c09..9740f57 100644
> > > --- a/hw/virtio-pci.c
> > > +++ b/hw/virtio-pci.c
> > > @@ -695,7 +695,8 @@ static PCIDeviceInfo virtio_info[] = {
> > >              DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 3),
> > >              DEFINE_VIRTIO_NET_FEATURES(VirtIOPCIProxy, host_features),
> > >              DEFINE_NIC_PROPERTIES(VirtIOPCIProxy, nic),
> > > -            DEFINE_PROP_UINT32("txtimer", VirtIOPCIProxy, txtimer, 1),
> > > +            DEFINE_PROP_UINT32("txtimer", VirtIOPCIProxy, txtimer,
> > > +                               TXTIMER_DEFAULT),
> > >              DEFINE_PROP_INT32("txburst", VirtIOPCIProxy, txburst, 256),
> > >              DEFINE_PROP_END_OF_LIST(),
> > >          },
> > > diff --git a/hw/virtio.h b/hw/virtio.h
> > > index 4051889..a1a17a2 100644
> > > --- a/hw/virtio.h
> > > +++ b/hw/virtio.h
> > > @@ -183,6 +183,12 @@ void virtio_update_irq(VirtIODevice *vdev);
> > >  void virtio_bind_device(VirtIODevice *vdev, const VirtIOBindings *binding,
> > >                          void *opaque);
> > >  
> > > +#ifdef CONFIG_IOTHREAD
> > > + #define TXTIMER_DEFAULT 0
> > > +#else
> > > + #define TXTIMER_DEFAULT 1
> > > +#endif
> > > +
> > 
> > Add a comment explaning that this is just a performance optimization?
> > 
> > >  /* Base devices.  */
> > >  VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf);
> > >  VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf,
> > > 
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe kvm" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
>