qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Prerna Saxena <prerna@linux.vnet.ibm.com>
To: qemu-devel <qemu-devel@nongnu.org>
Cc: Anthony Liguori <aliguori@us.ibm.com>,
	Hajnoczi <stefanha@linux.vnet.ibm.com>,
	Mahesh <mahesh@linux.vnet.ibm.com>,
	Stefan@gnu.org, Luiz Capitulino <lcapitulino@redhat.com>,
	Ananth Narayan <ananth@linux.vnet.ibm.com>
Subject: [Qemu-devel] [Tracing][RFC v2 PATCH 1/2] Introduce 'query-trace' & 'query-trace-events' interfaces
Date: Fri, 15 Oct 2010 10:10:10 +0530	[thread overview]
Message-ID: <20101015101010.05cebc96@zephyr> (raw)
In-Reply-To: <20101015100615.10915d2a@zephyr>

[PATCH 1/2] Introduce QMP interfaces : query-trace & query-trace-events


Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
---
 monitor.c     |   46 +++++++++++++++++++++++++++++++++++++++++---
 simpletrace.c |   58 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 simpletrace.h |    4 +++
 3 files changed, 104 insertions(+), 4 deletions(-)

diff --git a/monitor.c b/monitor.c
index fbb678d..7a150ae 100644
--- a/monitor.c
+++ b/monitor.c
@@ -941,15 +941,33 @@ static void do_info_cpu_stats(Monitor *mon)
 #endif
 
 #if defined(CONFIG_SIMPLE_TRACE)
-static void do_info_trace(Monitor *mon)
+static void do_info_trace_print(Monitor *mon)
 {
     st_print_trace((FILE *)mon, &monitor_fprintf);
 }
 
-static void do_info_trace_events(Monitor *mon)
+static void do_info_trace(Monitor *mon, QObject **ret_data)
+{
+    QList *trace_event_list = NULL;
+
+    st_print_trace_to_qlist(&trace_event_list);
+
+    *ret_data = QOBJECT(trace_event_list);
+}
+
+static void do_info_trace_events_print(Monitor *mon, const QObject *data)
 {
     st_print_trace_events((FILE *)mon, &monitor_fprintf);
 }
+
+static void do_info_trace_events(Monitor *mon, QObject **ret_data)
+{
+    QList *trace_event_list = NULL;
+
+    st_print_trace_events_to_qlist(&trace_event_list);
+
+    *ret_data = QOBJECT(trace_event_list);
+}
 #endif
 
 /**
@@ -2606,14 +2624,16 @@ static const mon_cmd_t info_cmds[] = {
         .args_type  = "",
         .params     = "",
         .help       = "show current contents of trace buffer",
-        .mhandler.info = do_info_trace,
+        .user_print = do_info_trace_print,
+        .mhandler.info_new = do_info_trace,
     },
     {
         .name       = "trace-events",
         .args_type  = "",
         .params     = "",
         .help       = "show available trace-events & their state",
-        .mhandler.info = do_info_trace_events,
+        .user_print = do_info_trace_events_print,
+        .mhandler.info_new = do_info_trace_events,
     },
 #endif
     {
@@ -2748,6 +2768,24 @@ static const mon_cmd_t qmp_query_cmds[] = {
         .mhandler.info_async = do_info_balloon,
         .flags      = MONITOR_CMD_ASYNC,
     },
+#if defined(CONFIG_SIMPLE_TRACE)
+    {
+        .name       = "trace",
+        .args_type  = "",
+        .params     = "",
+        .help       = "show current contents of trace buffer",
+        .user_print = do_info_trace_print,
+        .mhandler.info_new = do_info_trace,
+    },
+    {
+        .name       = "trace-events",
+        .args_type  = "",
+        .params     = "",
+        .help       = "show available trace-events & their state",
+        .user_print = do_info_trace_events_print,
+        .mhandler.info_new = do_info_trace_events,
+    },
+#endif
     { /* NULL */ },
 };
 
diff --git a/simpletrace.c b/simpletrace.c
index f849e42..a964312 100644
--- a/simpletrace.c
+++ b/simpletrace.c
@@ -220,6 +220,43 @@ void st_print_trace(FILE *stream, int (*stream_printf)(FILE *stream, const char
     }
 }
 
+/**
+ * Add the current contents of trace-buffer as a QList.
+ * NOTE: This assumes trace_list hasnt already been allocated with a QList.
+ *        The initialization happens here.
+ */
+void st_print_trace_to_qlist(QList **tlist)
+{
+    QObject *data;
+    unsigned int i;
+
+    assert(tlist);
+
+    *tlist = qlist_new();
+
+    for (i = 0; i < trace_idx; i++) {
+          data = qobject_from_jsonf("{"
+                                    " 'timestamp': %" PRId64 ","
+                                    " 'event': %" PRId64 ","
+                                    " 'arg1': %" PRId64 ","
+                                    " 'arg2': %" PRId64 ","
+                                    " 'arg3': %" PRId64 ","
+                                    " 'arg4': %" PRId64 ","
+                                    " 'arg5': %" PRId64 ","
+                                    " 'arg6': %" PRId64
+                                    "}",
+                                    trace_buf[i].timestamp_ns,
+                                    trace_buf[i].event,
+                                    trace_buf[i].x1,
+                                    trace_buf[i].x2,
+                                    trace_buf[i].x3,
+                                    trace_buf[i].x4,
+                                    trace_buf[i].x5,
+                                    trace_buf[i].x6);
+          qlist_append_obj(*tlist, data);
+    }
+}
+
 void st_print_trace_events(FILE *stream, int (*stream_printf)(FILE *stream, const char *fmt, ...))
 {
     unsigned int i;
@@ -230,6 +267,27 @@ void st_print_trace_events(FILE *stream, int (*stream_printf)(FILE *stream, cons
     }
 }
 
+/**
+ * Add current set of trace-events as a QList.
+ * NOTE: This assumes trace_list hasnt already been allocated with a QList.
+ *        The initialization happens here.
+ */
+void st_print_trace_events_to_qlist(QList **tlist)
+{
+    QObject *data;
+    unsigned int i;
+
+    assert(tlist);
+
+    *tlist = qlist_new();
+
+    for (i = 0; i < NR_TRACE_EVENTS; i++) {
+          data = qobject_from_jsonf("{ 'name': %s, 'event-id': %d, 'state': %d}                                    ", trace_list[i].tp_name, i,
+                                    trace_list[i].state);
+          qlist_append_obj(*tlist, data);
+    }
+}
+
 static TraceEvent* find_trace_event_by_name(const char *tname)
 {
     unsigned int i;
diff --git a/simpletrace.h b/simpletrace.h
index cf35897..6043c21 100644
--- a/simpletrace.h
+++ b/simpletrace.h
@@ -14,6 +14,8 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include <stdio.h>
+#include "qdict.h"
+#include "qjson.h"
 
 typedef uint64_t TraceEventID;
 
@@ -36,5 +38,7 @@ void st_print_trace_file_status(FILE *stream, int (*stream_printf)(FILE *stream,
 void st_set_trace_file_enabled(bool enable);
 bool st_set_trace_file(const char *file);
 void st_flush_trace_buffer(void);
+void st_print_trace_to_qlist(QList **tlist);
+void st_print_trace_events_to_qlist(QList **tlist);
 
 #endif /* SIMPLETRACE_H */
-- 
1.7.2.2



-- 
Prerna Saxena

Linux Technology Centre,
IBM Systems and Technology Lab,
Bangalore, India

  reply	other threads:[~2010-10-15  4:42 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-15  4:36 [Qemu-devel] [Tracing][RFC v2 PATCH 0/2] QMP Query interfaces for tracing Prerna Saxena
2010-10-15  4:40 ` Prerna Saxena [this message]
2010-10-15  9:35   ` [Qemu-devel] Re: [Tracing][RFC v2 PATCH 1/2] Introduce 'query-trace' & 'query-trace-events' interfaces Stefan Hajnoczi
2010-10-15  4:43 ` [Qemu-devel] [Tracing][RFC v2 PATCH 2/2] Documentation for QMP interfaces Prerna Saxena

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101015101010.05cebc96@zephyr \
    --to=prerna@linux.vnet.ibm.com \
    --cc=Stefan@gnu.org \
    --cc=aliguori@us.ibm.com \
    --cc=ananth@linux.vnet.ibm.com \
    --cc=lcapitulino@redhat.com \
    --cc=mahesh@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).