[Qemu-devel] Re: [RFC PATCH 8/8] device-assignment: pass through and stub more PCI caps

["Michael S. Tsirkin" <mst@redhat.com>]

On Thu, Nov 11, 2010 at 11:30:07PM -0700, Alex Williamson wrote:
> On Fri, 2010-11-12 at 07:36 +0200, Michael S. Tsirkin wrote:
> > On Thu, Nov 11, 2010 at 07:56:46PM -0700, Alex Williamson wrote:
> > > Some drivers depend on finding capabilities like power management,
> > > PCI express/X, vital product data, or vendor specific fields.  Now
> > > that we have better capability support, we can pass more of these
> > > tables through to the guest.  Note that VPD and VNDR are direct pass
> > > through capabilies, the rest are mostly empty shells with a few
> > > writable bits where necessary.
> > > 
> > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> > > ---
> > > 
> > >  hw/device-assignment.c |  160 +++++++++++++++++++++++++++++++++++++++++++++---
> > >  1 files changed, 149 insertions(+), 11 deletions(-)
> > > 
> > > diff --git a/hw/device-assignment.c b/hw/device-assignment.c
> > > index 179c7dc..1b228ad 100644
> > > --- a/hw/device-assignment.c
> > > +++ b/hw/device-assignment.c
> > > @@ -366,6 +366,27 @@ static uint8_t assigned_dev_pci_read_byte(PCIDevice *d, int pos)
> > >      return (uint8_t)assigned_dev_pci_read(d, pos, 1);
> > >  }
> > >  
> > > +static void assigned_dev_pci_write(PCIDevice *d, int pos, uint32_t val, int len)
> > > +{
> > > +    AssignedDevice *pci_dev = container_of(d, AssignedDevice, dev);
> > > +    ssize_t ret;
> > > +    int fd = pci_dev->real_device.config_fd;
> > > +
> > > +again:
> > > +    ret = pwrite(fd, &val, len, pos);
> > > +    if (ret != len) {
> > > +	if ((ret < 0) && (errno == EINTR || errno == EAGAIN))
> > > +	    goto again;
> > 
> > 
> > do {} while() ?
> 
> Sure, this is just a copy of another place that does something similar.
> They should either be merged or both converted in a separate patch.
> 
> > > +
> > > +	fprintf(stderr, "%s: pwrite failed, ret = %zd errno = %d\n",
> > > +		__func__, ret, errno);
> > > +
> > > +	exit(1);
> > > +    }
> > > +
> > > +    return;
> > > +}
> > > +
> > >  static uint8_t pci_find_cap_offset(PCIDevice *d, uint8_t cap)
> > >  {
> > >      int id;
> > > @@ -1244,37 +1265,75 @@ static void assigned_dev_update_msix(PCIDevice *pci_dev, unsigned int ctrl_pos)
> > >  #endif
> > >  #endif
> > >  
> > > +static uint32_t assigned_device_pci_cap_read_config(PCIDevice *pci_dev,
> > > +                                                    uint8_t cap_id,
> > > +                                                    uint32_t address, int len)
> > > +{
> > > +    uint8_t cap;
> > > +
> > > +    switch (cap_id) {
> > > +
> > > +    case PCI_CAP_ID_VPD:
> > > +        cap = pci_find_capability(pci_dev, cap_id);
> > > +        if (address - cap >= PCI_CAP_FLAGS) {
> > > +            return assigned_dev_pci_read(pci_dev, address, len);
> > > +        }
> > > +        break;
> > > +
> > > +    case PCI_CAP_ID_VNDR:
> > > +        cap = pci_find_capability(pci_dev, cap_id);
> > > +        if (address - cap > PCI_CAP_FLAGS) {
> > > +            return assigned_dev_pci_read(pci_dev, address, len);
> > > +        }
> > > +        break;
> > > +    }
> > > +
> > > +    return pci_default_cap_read_config(pci_dev, cap_id, address, len);
> > > +}
> > > +
> > >  static void assigned_device_pci_cap_write_config(PCIDevice *pci_dev,
> > >                                                   uint8_t cap_id,
> > >                                                   uint32_t address,
> > >                                                   uint32_t val, int len)
> > >  {
> > > +    uint8_t cap;
> > > +
> > >      pci_default_cap_write_config(pci_dev, cap_id, address, val, len);
> > >  
> > >      switch (cap_id) {
> > >  #ifdef KVM_CAP_IRQ_ROUTING
> > >      case PCI_CAP_ID_MSI:
> > >  #ifdef KVM_CAP_DEVICE_MSI
> > > -        {
> > > -            uint8_t cap = pci_find_capability(pci_dev, cap_id);
> > > -            if (ranges_overlap(address - cap, len, PCI_MSI_FLAGS, 1)) {
> > > -                assigned_dev_update_msi(pci_dev, cap + PCI_MSI_FLAGS);
> > > -            }
> > > +        cap = pci_find_capability(pci_dev, cap_id);
> > > +        if (ranges_overlap(address - cap, len, PCI_MSI_FLAGS, 1)) {
> > > +            assigned_dev_update_msi(pci_dev, cap + PCI_MSI_FLAGS);
> > >          }
> > >  #endif
> > >          break;
> > >  
> > >      case PCI_CAP_ID_MSIX:
> > >  #ifdef KVM_CAP_DEVICE_MSIX
> > > -        {
> > > -            uint8_t cap = pci_find_capability(pci_dev, cap_id);
> > > -            if (ranges_overlap(address - cap, len, PCI_MSIX_FLAGS + 1, 1)) {
> > > -                assigned_dev_update_msix(pci_dev, cap + PCI_MSIX_FLAGS);
> > > -            }
> > > +        cap = pci_find_capability(pci_dev, cap_id);
> > > +        if (ranges_overlap(address - cap, len, PCI_MSIX_FLAGS + 1, 1)) {
> > > +            assigned_dev_update_msix(pci_dev, cap + PCI_MSIX_FLAGS);
> > >          }
> > >  #endif
> > >          break;
> > >  #endif
> > > +
> > > +    case PCI_CAP_ID_VPD:
> > > +        cap = pci_find_capability(pci_dev, cap_id);
> > > +        if (address - cap >= PCI_CAP_FLAGS) {
> > > +            assigned_dev_pci_write(pci_dev, address, val, len);
> > > +        }
> > > +        break;
> > > +
> > > +    case PCI_CAP_ID_VNDR:
> > > +        cap = pci_find_capability(pci_dev, cap_id);
> > > +        if (address - cap > PCI_CAP_FLAGS) {
> > > +            assigned_dev_pci_write(pci_dev, address, val, len);
> > > +        }
> > > +        break;
> > 
> > I have a feeling we should use overlap functions instead of
> > address math. What do you think?
> 
> if (!ranges_overlap(address - cap, len, 0, PCI_CAP_FLAGS)) ?

	ranges_overlap(address, len, cap, PCI_CAP_FLAGS)

> Sure, that'd be a nice cleanup.
> 
> > Also - put cap offsets in assigned device structure to avoid
> > find calls?
> 
> I suppose there aren't enough capability IDs that it'd take much space
> to do so, but it doesn't sound like a unique to device assignment issue.
> Maybe that should live on PCIDevice with an access function.

Sure, I put all caps that we actually emulate in PCIDevice.
So that would apply to express, pcix, etc.
Sticking offsets to caps that core doesn't emulate in PCIDevice
seems a bit strange. That's why each device has its own device state.

> > >      }
> > >      return;
> > >  }
> > > @@ -1340,6 +1399,84 @@ static int assigned_device_pci_cap_init(PCIDevice *pci_dev)
> > >  #endif
> > >  #endif
> > >  
> > > +    /* Minimal PM support, make the state bits writable so the guest
> > > +     * thinks it's doing something. */
> > > +    if ((pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_PM))) {
> > > +        uint16_t pmc, pmcsr;
> > > +        pci_add_capability_at_offset(pci_dev, PCI_CAP_ID_PM, pos,
> > > +                                     PCI_PM_SIZEOF);
> > > +
> > > +        pmc = pci_get_word(pci_dev->config + pos + PCI_CAP_FLAGS);
> > > +        pmc &= (PCI_PM_CAP_VER_MASK | PCI_PM_CAP_DSI);
> > > +        pci_set_word(pci_dev->config + pos + PCI_CAP_FLAGS, pmc);
> > > +
> > > +        pmcsr = pci_get_word(pci_dev->config + pos + PCI_PM_CTRL);
> > > +        pmcsr &= (PCI_PM_CTRL_STATE_MASK);
> > > +        pmcsr |= PCI_PM_CTRL_NO_SOFT_RST;
> > > +        pci_set_word(pci_dev->config + pos + PCI_PM_CTRL, pmcsr);
> > > +
> > > +        pci_set_word(pci_dev->wmask + pos + PCI_PM_CTRL,
> > > +                     PCI_PM_CTRL_STATE_MASK);
> > > +    }
> > 
> > we don't pass anything to device. So - can this be put in pci_pm.c
> > so that emulated devices can use this too?
> 
> That's part of why this one is an RFC, should we allow the guest to do
> some level of power management to the physical device?  Xen seems to
> allow D-state manipulation by the guest.

Hmm, ok. I still hope we can do the emulated one and then
assigned device would call the relevant function and pass
info to the backend.

> > > +
> > > +    if ((pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_EXP))) {
> > > +        uint16_t devctl, lnkcap, lnksta;
> > > +
> > > +        pci_add_capability_at_offset(pci_dev, PCI_CAP_ID_EXP, pos, 0x40);
> > > +
> > > +        devctl = pci_get_word(pci_dev->config + pos + PCI_EXP_DEVCTL);
> > > +        devctl = (devctl & (PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_PAYLOAD)) |
> > > +                  PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN;
> > > +        pci_set_word(pci_dev->config + pos + PCI_EXP_DEVCTL, devctl);
> > > +        devctl = PCI_EXP_DEVCTL_BCR_FLR | PCI_EXP_DEVCTL_AUX_PME;
> > > +        pci_set_word(pci_dev->wmask + pos + PCI_EXP_DEVCTL, ~devctl);
> > > +
> > > +        lnkcap = pci_get_word(pci_dev->config + pos + PCI_EXP_LNKCAP);
> > > +        lnkcap &= (PCI_EXP_LNKCAP_SLS | PCI_EXP_LNKCAP_MLW |
> > > +                   PCI_EXP_LNKCAP_ASPMS | PCI_EXP_LNKCAP_L0SEL |
> > > +                   PCI_EXP_LNKCAP_L1EL);
> > > +        pci_set_word(pci_dev->config + pos + PCI_EXP_LNKCAP, lnkcap);
> > > +
> > > +        pci_set_word(pci_dev->wmask + pos + PCI_EXP_LNKCAP,
> > > +                     PCI_EXP_LNKCTL_ASPMC | PCI_EXP_LNKCTL_RCB |
> > > +                     PCI_EXP_LNKCTL_CCC | PCI_EXP_LNKCTL_ES |
> > > +                     PCI_EXP_LNKCTL_CLKREQ_EN | PCI_EXP_LNKCTL_HAWD);
> > > +        
> > > +        lnksta = pci_get_word(pci_dev->config + pos + PCI_EXP_LNKSTA);
> > > +        lnksta &= (PCI_EXP_LNKSTA_CLS | PCI_EXP_LNKSTA_NLW);
> > > +        pci_set_word(pci_dev->config + pos + PCI_EXP_LNKSTA, lnksta);
> > > +
> > > +        pci_set_word(pci_dev->wmask + pos + 0x28, 0x1f);
> > > +        pci_set_word(pci_dev->wmask + pos + 0x30, 0xfbf);
> > 
> > This seems to overlap functionally with the express work upstream.
> > Can code from there be reused?  I also wonder whether is affects the
> > guest OS if it finds an express device on a non-express bridge.
> 
> Yes, perhaps it can be merged.  I'd like to start with figuring out what
> we need for device assignment, and merging where it makes sense later
> than stall out trying to solve the whole problem upfront.
> 
> It could certainly be confusing for a driver to find an express device
> under a PIIX chipset, but I think typically the driver is just looking
> for link speed info for pretty printks.
> > > +    }
> > > +
> > > +    if ((pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_VPD))) {
> > > +        pci_add_capability_at_offset(pci_dev, PCI_CAP_ID_VPD, pos, 0x8);
> > > +    }
> > > +
> > > +    if ((pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_VNDR))) {
> > > +        uint8_t len = pci_get_byte(pci_dev->config + pos + PCI_CAP_FLAGS);
> > > +        pci_add_capability_at_offset(pci_dev, PCI_CAP_ID_VNDR, pos, len);
> > > +    }
> > > +
> > > +    if ((pos = pci_find_cap_offset(pci_dev, PCI_CAP_ID_PCIX))) {
> > > +        uint16_t cmd;
> > > +        uint32_t status;
> > > +
> > > +        pci_add_capability_at_offset(pci_dev, PCI_CAP_ID_PCIX, pos, 0x8);
> > > +
> > > +        cmd = pci_get_word(pci_dev->config + pos + PCI_X_CMD);
> > > +        cmd &= (PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO | PCI_X_CMD_MAX_READ |
> > > +                PCI_X_CMD_MAX_SPLIT);
> > > +        pci_set_word(pci_dev->config + pos + PCI_X_CMD, cmd);
> > > +
> > > +        status = pci_get_long(pci_dev->config + pos + PCI_X_STATUS);
> > > +        status &= ~(PCI_X_STATUS_BUS | PCI_X_STATUS_DEVFN);
> > > +        status |= (pci_bus_num(pci_dev->bus) << 8) | pci_dev->devfn;
> > > +        status &= ~(PCI_X_STATUS_SPL_DISC | PCI_X_STATUS_UNX_SPL |
> > > +                    PCI_X_STATUS_SPL_ERR);
> > > +        pci_set_long(pci_dev->config + pos + PCI_X_STATUS, status);
> > > +    }
> > 
> > This will be handy for non-assignment case so
> > I'd like to see this moved out of device-assignment.c:
> > we could create pcix.c or just add to pci.c.
> 
> Yeah, I'm not sure there's enough we can poke at in a PCIX capability to
> warrant it's own file.  Here for the same reason as the others, what do
> we want to expose, what's emulated, what's poke-able.  We also have the
> benefit here that we get default from hardware.  If it stays this small,
> I'd just assume leave it here than try to generalize an interface when
> we're the only user.

Do you have a pcix device btw? Do we even care?

> > >      return 0;
> > >  }
> > >  
> > > @@ -1466,7 +1603,8 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
> > >      dev->h_busnr = dev->host.bus;
> > >      dev->h_devfn = PCI_DEVFN(dev->host.dev, dev->host.func);
> > >  
> > > -    pci_register_capability_handlers(pci_dev, NULL,
> > > +    pci_register_capability_handlers(pci_dev,
> > > +                                     assigned_device_pci_cap_read_config,
> > >                                       assigned_device_pci_cap_write_config);
> > 
> > Maybe these could go away?
> 
> Sure, pass a capability ID to the read/write_config functions and I'd
> support this going way.  I don't think that necessarily needs to be tied
> to this series though.  Thanks,
> 
> Alex

As in, can be a separate cleanup later. Yes.

> > >  
> > >      if (assigned_device_pci_cap_init(pci_dev) < 0)
> 
>