From: Alex Williamson <alex.williamson@redhat.com>
To: kvm@vger.kernel.org, mst@redhat.com
Cc: chrisw@redhat.com, alex.williamson@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 2/9] pci: Remove pci_enable_capability_support()
Date: Fri, 12 Nov 2010 10:46:19 -0700 [thread overview]
Message-ID: <20101112174616.3169.58332.stgit@s20.home> (raw)
In-Reply-To: <20101112173929.3169.47618.stgit@s20.home>
This interface doesn't make much sense, adding a capability can
take care of everything, just provide a means to register
capability read/write handlers.
Device assignment does it's own thing, so requires a couple
ugly hacks that will be cleaned by subsequent patches.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
hw/device-assignment.c | 12 ++++++++---
hw/pci.c | 52 +++++++++++++++++++++---------------------------
hw/pci.h | 9 +++-----
3 files changed, 35 insertions(+), 38 deletions(-)
diff --git a/hw/device-assignment.c b/hw/device-assignment.c
index bde231d..311c197 100644
--- a/hw/device-assignment.c
+++ b/hw/device-assignment.c
@@ -1292,7 +1292,12 @@ static int assigned_device_pci_cap_init(PCIDevice *pci_dev)
PCIRegion *pci_region = dev->real_device.regions;
int next_cap_pt = 0;
+ pci_dev->cap.supported = 1;
+ pci_dev->cap.start = PCI_CAPABILITY_CONFIG_DEFAULT_START_ADDR;
pci_dev->cap.length = 0;
+ pci_dev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
+ pci_dev->config[PCI_CAPABILITY_LIST] = pci_dev->cap.start;
+
#ifdef KVM_CAP_IRQ_ROUTING
#ifdef KVM_CAP_DEVICE_MSI
/* Expose MSI capability
@@ -1468,9 +1473,10 @@ static int assigned_initfn(struct PCIDevice *pci_dev)
dev->h_busnr = dev->host.bus;
dev->h_devfn = PCI_DEVFN(dev->host.dev, dev->host.func);
- if (pci_enable_capability_support(pci_dev, 0, NULL,
- assigned_device_pci_cap_write_config,
- assigned_device_pci_cap_init) < 0)
+ pci_register_capability_handlers(pci_dev, NULL,
+ assigned_device_pci_cap_write_config);
+
+ if (assigned_device_pci_cap_init(pci_dev) < 0)
goto out;
/* assign device to guest */
diff --git a/hw/pci.c b/hw/pci.c
index 4bc5882..607eb27 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -787,6 +787,8 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus,
config_write = pci_default_write_config;
pci_dev->config_read = config_read;
pci_dev->config_write = config_write;
+ pci_dev->cap.config_read = pci_default_cap_read_config;
+ pci_dev->cap.config_write = pci_default_cap_write_config;
bus->devices[devfn] = pci_dev;
pci_dev->irq = qemu_allocate_irqs(pci_set_irq, pci_dev, PCI_NUM_PINS);
pci_dev->version_id = 2; /* Current pci device vmstate version */
@@ -1894,35 +1896,21 @@ PCIDevice *pci_create_simple_multifunction(PCIBus *bus, int devfn,
return dev;
}
-int pci_enable_capability_support(PCIDevice *pci_dev,
- uint32_t config_start,
- PCICapConfigReadFunc *config_read,
- PCICapConfigWriteFunc *config_write,
- PCICapConfigInitFunc *config_init)
+void pci_register_capability_handlers(PCIDevice *pdev,
+ PCICapConfigReadFunc *config_read,
+ PCICapConfigWriteFunc *config_write)
{
- if (!pci_dev)
- return -ENODEV;
-
- pci_dev->config[0x06] |= 0x10; // status = capabilities
-
- if (config_start == 0)
- pci_dev->cap.start = PCI_CAPABILITY_CONFIG_DEFAULT_START_ADDR;
- else if (config_start >= 0x40 && config_start < 0xff)
- pci_dev->cap.start = config_start;
- else
- return -EINVAL;
+ if (config_read) {
+ pdev->cap.config_read = config_read;
+ } else {
+ pdev->cap.config_read = pci_default_cap_read_config;
+ }
- if (config_read)
- pci_dev->cap.config_read = config_read;
- else
- pci_dev->cap.config_read = pci_default_cap_read_config;
- if (config_write)
- pci_dev->cap.config_write = config_write;
- else
- pci_dev->cap.config_write = pci_default_cap_write_config;
- pci_dev->cap.supported = 1;
- pci_dev->config[PCI_CAPABILITY_LIST] = pci_dev->cap.start;
- return config_init(pci_dev);
+ if (config_write) {
+ pdev->cap.config_write = config_write;
+ } else {
+ pdev->cap.config_write = pci_default_cap_write_config;
+ }
}
PCIDevice *pci_create(PCIBus *bus, int devfn, const char *name)
@@ -2046,12 +2034,16 @@ int pci_add_capability_at_offset(PCIDevice *pdev, uint8_t cap_id,
config[PCI_CAP_LIST_ID] = cap_id;
config[PCI_CAP_LIST_NEXT] = pdev->config[PCI_CAPABILITY_LIST];
pdev->config[PCI_CAPABILITY_LIST] = offset;
- pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
memset(pdev->used + offset, 0xFF, size);
/* Make capability read-only by default */
memset(pdev->wmask + offset, 0, size);
/* Check capability by default */
memset(pdev->cmask + offset, 0xFF, size);
+
+ pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST;
+ pdev->cap.supported = 1;
+ pdev->cap.start = pdev->cap.start ? MIN(pdev->cap.start, offset) : offset;
+
return offset;
}
@@ -2079,8 +2071,10 @@ void pci_del_capability(PCIDevice *pdev, uint8_t cap_id, uint8_t size)
memset(pdev->cmask + offset, 0, size);
memset(pdev->used + offset, 0, size);
- if (!pdev->config[PCI_CAPABILITY_LIST])
+ if (!pdev->config[PCI_CAPABILITY_LIST]) {
pdev->config[PCI_STATUS] &= ~PCI_STATUS_CAP_LIST;
+ pdev->cap.start = pdev->cap.length = 0;
+ }
}
/* Reserve space for capability at a known offset (to call after load). */
diff --git a/hw/pci.h b/hw/pci.h
index 334e928..0712e55 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -87,7 +87,6 @@ typedef void PCICapConfigWriteFunc(PCIDevice *pci_dev,
uint32_t address, uint32_t val, int len);
typedef uint32_t PCICapConfigReadFunc(PCIDevice *pci_dev,
uint32_t address, int len);
-typedef int PCICapConfigInitFunc(PCIDevice *pci_dev);
typedef struct PCIIORegion {
pcibus_t addr; /* current PCI mapping address. -1 means not mapped */
@@ -228,11 +227,9 @@ void pci_register_bar(PCIDevice *pci_dev, int region_num,
void pci_map_option_rom(PCIDevice *pdev, int region_num, pcibus_t addr,
pcibus_t size, int type);
-int pci_enable_capability_support(PCIDevice *pci_dev,
- uint32_t config_start,
- PCICapConfigReadFunc *config_read,
- PCICapConfigWriteFunc *config_write,
- PCICapConfigInitFunc *config_init);
+void pci_register_capability_handlers(PCIDevice *pci_dev,
+ PCICapConfigReadFunc *config_read,
+ PCICapConfigWriteFunc *config_write);
int pci_map_irq(PCIDevice *pci_dev, int pin);
next prev parent reply other threads:[~2010-11-12 17:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-12 17:45 [Qemu-devel] [PATCH v2 0/9] PCI capability and device assignment improvements Alex Williamson
2010-11-12 17:46 ` [Qemu-devel] [PATCH v2 1/9] pci: pci_default_cap_write_config ignores wmask Alex Williamson
2010-11-13 21:09 ` [Qemu-devel] " Michael S. Tsirkin
2010-11-16 21:33 ` Marcelo Tosatti
2010-11-12 17:46 ` Alex Williamson [this message]
2010-11-12 17:46 ` [Qemu-devel] [PATCH v2 3/9] device-assignment: Use PCI capabilities support Alex Williamson
2010-11-12 17:46 ` [Qemu-devel] [PATCH v2 4/9] pci: Replace used bitmap with capability byte map Alex Williamson
2010-11-12 17:46 ` [Qemu-devel] [PATCH v2 5/9] pci: Remove cap.length, cap.start, cap.supported Alex Williamson
2010-11-12 17:46 ` [Qemu-devel] [PATCH v2 6/9] device-assignment: Move PCI capabilities to match physical hardware Alex Williamson
2010-11-12 17:47 ` [Qemu-devel] [PATCH v2 7/9] pci: Pass ID for capability read/write handlers Alex Williamson
2010-11-12 17:47 ` [Qemu-devel] [PATCH v2 8/9] pci: Remove capability read/write config handlers Alex Williamson
2010-11-12 17:47 ` [Qemu-devel] [PATCH v2 9/9] pci: Store capability offsets in PCIDevice Alex Williamson
2010-11-13 21:05 ` [Qemu-devel] " Michael S. Tsirkin
2010-11-15 3:49 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101112174616.3169.58332.stgit@s20.home \
--to=alex.williamson@redhat.com \
--cc=chrisw@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).