From: "Michael S. Tsirkin" <mst@redhat.com>
To: Stefan Weil <weil@mail.berlios.de>
Cc: QEMU Developers <qemu-devel@nongnu.org>
Subject: [Qemu-devel] Re: [PATCH] pci: Replace unneeded type casts in calls of pci_register_bar
Date: Sat, 20 Nov 2010 20:29:38 +0200 [thread overview]
Message-ID: <20101120182938.GA7090@redhat.com> (raw)
In-Reply-To: <1290191347-5012-1-git-send-email-weil@mail.berlios.de>
On Fri, Nov 19, 2010 at 07:29:07PM +0100, Stefan Weil wrote:
> There is no need for these type casts (as other existing
> code shows). So re-write the first argument without
> type cast (and remove a related TODO comment).
>
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Thanks, applied.
> ---
> hw/cirrus_vga.c | 4 ++--
> hw/e1000.c | 4 ++--
> hw/ide/via.c | 2 +-
> hw/lsi53c895a.c | 7 +++----
> hw/openpic.c | 2 +-
> hw/usb-ohci.c | 2 +-
> 6 files changed, 10 insertions(+), 11 deletions(-)
>
> diff --git a/hw/cirrus_vga.c b/hw/cirrus_vga.c
> index aadc56f..40be55d 100644
> --- a/hw/cirrus_vga.c
> +++ b/hw/cirrus_vga.c
> @@ -3204,10 +3204,10 @@ static int pci_cirrus_vga_initfn(PCIDevice *dev)
> /* memory #0 LFB */
> /* memory #1 memory-mapped I/O */
> /* XXX: s->vga.vram_size must be a power of two */
> - pci_register_bar((PCIDevice *)d, 0, 0x2000000,
> + pci_register_bar(&d->dev, 0, 0x2000000,
> PCI_BASE_ADDRESS_MEM_PREFETCH, cirrus_pci_lfb_map);
> if (device_id == CIRRUS_ID_CLGD5446) {
> - pci_register_bar((PCIDevice *)d, 1, CIRRUS_PNPMMIO_SIZE,
> + pci_register_bar(&d->dev, 1, CIRRUS_PNPMMIO_SIZE,
> PCI_BASE_ADDRESS_SPACE_MEMORY, cirrus_pci_mmio_map);
> }
> return 0;
> diff --git a/hw/e1000.c b/hw/e1000.c
> index 7811699..57d08cf 100644
> --- a/hw/e1000.c
> +++ b/hw/e1000.c
> @@ -1133,10 +1133,10 @@ static int pci_e1000_init(PCIDevice *pci_dev)
> d->mmio_index = cpu_register_io_memory(e1000_mmio_read,
> e1000_mmio_write, d);
>
> - pci_register_bar((PCIDevice *)d, 0, PNPMMIO_SIZE,
> + pci_register_bar(&d->dev, 0, PNPMMIO_SIZE,
> PCI_BASE_ADDRESS_SPACE_MEMORY, e1000_mmio_map);
>
> - pci_register_bar((PCIDevice *)d, 1, IOPORT_SIZE,
> + pci_register_bar(&d->dev, 1, IOPORT_SIZE,
> PCI_BASE_ADDRESS_SPACE_IO, ioport_map);
>
> memmove(d->eeprom_data, e1000_eeprom_template,
> diff --git a/hw/ide/via.c b/hw/ide/via.c
> index b2c7cad..2001a36 100644
> --- a/hw/ide/via.c
> +++ b/hw/ide/via.c
> @@ -153,7 +153,7 @@ static int vt82c686b_ide_initfn(PCIDevice *dev)
> pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
>
> qemu_register_reset(via_reset, d);
> - pci_register_bar((PCIDevice *)d, 4, 0x10,
> + pci_register_bar(&d->dev, 4, 0x10,
> PCI_BASE_ADDRESS_SPACE_IO, bmdma_map);
>
> vmstate_register(&dev->qdev, 0, &vmstate_ide_pci, d);
> diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
> index f97335e..1aef62f 100644
> --- a/hw/lsi53c895a.c
> +++ b/hw/lsi53c895a.c
> @@ -2177,12 +2177,11 @@ static int lsi_scsi_init(PCIDevice *dev)
> s->ram_io_addr = cpu_register_io_memory(lsi_ram_readfn,
> lsi_ram_writefn, s);
>
> - /* TODO: use dev and get rid of cast below */
> - pci_register_bar((struct PCIDevice *)s, 0, 256,
> + pci_register_bar(&s->dev, 0, 256,
> PCI_BASE_ADDRESS_SPACE_IO, lsi_io_mapfunc);
> - pci_register_bar((struct PCIDevice *)s, 1, 0x400,
> + pci_register_bar(&s->dev, 1, 0x400,
> PCI_BASE_ADDRESS_SPACE_MEMORY, lsi_mmio_mapfunc);
> - pci_register_bar((struct PCIDevice *)s, 2, 0x2000,
> + pci_register_bar(&s->dev, 2, 0x2000,
> PCI_BASE_ADDRESS_SPACE_MEMORY, lsi_ram_mapfunc);
> QTAILQ_INIT(&s->queue);
>
> diff --git a/hw/openpic.c b/hw/openpic.c
> index 01bf15f..f6b8f21 100644
> --- a/hw/openpic.c
> +++ b/hw/openpic.c
> @@ -1197,7 +1197,7 @@ qemu_irq *openpic_init (PCIBus *bus, int *pmem_index, int nb_cpus,
> pci_conf[0x3d] = 0x00; // no interrupt pin
>
> /* Register I/O spaces */
> - pci_register_bar((PCIDevice *)opp, 0, 0x40000,
> + pci_register_bar(&opp->pci_dev, 0, 0x40000,
> PCI_BASE_ADDRESS_SPACE_MEMORY, &openpic_map);
> } else {
> opp = qemu_mallocz(sizeof(openpic_t));
> diff --git a/hw/usb-ohci.c b/hw/usb-ohci.c
> index c60fd8d..8fb2f83 100644
> --- a/hw/usb-ohci.c
> +++ b/hw/usb-ohci.c
> @@ -1741,7 +1741,7 @@ static int usb_ohci_initfn_pci(struct PCIDevice *dev)
> ohci->state.irq = ohci->pci_dev.irq[0];
>
> /* TODO: avoid cast below by using dev */
> - pci_register_bar((struct PCIDevice *)ohci, 0, 256,
> + pci_register_bar(&ohci->pci_dev, 0, 256,
> PCI_BASE_ADDRESS_SPACE_MEMORY, ohci_mapfunc);
> return 0;
> }
> --
> 1.7.2.3
prev parent reply other threads:[~2010-11-20 18:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-19 18:29 [Qemu-devel] [PATCH] pci: Replace unneeded type casts in calls of pci_register_bar Stefan Weil
2010-11-20 18:29 ` Michael S. Tsirkin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101120182938.GA7090@redhat.com \
--to=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=weil@mail.berlios.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).