From: Chris Dearman <chris@mips.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH] [MIPS] Clear softfpu exception state for round, trunc, ceil and floor
Date: Tue, 8 Feb 2011 19:03:30 -0800 [thread overview]
Message-ID: <20110209030330.20220.14997.stgit@localhost6.localdomain6> (raw)
In-Reply-To: <20110209030310.20220.38837.stgit@localhost6.localdomain6>
Signed-off-by: Chris Dearman <chris@mips.com>
---
target-mips/op_helper.c | 16 ++++++++++++++++
1 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/target-mips/op_helper.c b/target-mips/op_helper.c
index 41abd57..e044db4 100644
--- a/target-mips/op_helper.c
+++ b/target-mips/op_helper.c
@@ -2294,6 +2294,7 @@ uint64_t helper_float_roundl_d(uint64_t fdt0)
{
uint64_t dt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_nearest_even, &env->active_fpu.fp_status);
dt2 = float64_to_int64(fdt0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2307,6 +2308,7 @@ uint64_t helper_float_roundl_s(uint32_t fst0)
{
uint64_t dt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_nearest_even, &env->active_fpu.fp_status);
dt2 = float32_to_int64(fst0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2320,6 +2322,7 @@ uint32_t helper_float_roundw_d(uint64_t fdt0)
{
uint32_t wt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_nearest_even, &env->active_fpu.fp_status);
wt2 = float64_to_int32(fdt0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2333,6 +2336,7 @@ uint32_t helper_float_roundw_s(uint32_t fst0)
{
uint32_t wt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_nearest_even, &env->active_fpu.fp_status);
wt2 = float32_to_int32(fst0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2346,6 +2350,7 @@ uint64_t helper_float_truncl_d(uint64_t fdt0)
{
uint64_t dt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
dt2 = float64_to_int64_round_to_zero(fdt0, &env->active_fpu.fp_status);
update_fcr31();
if (GET_FP_CAUSE(env->active_fpu.fcr31) & (FP_OVERFLOW | FP_INVALID))
@@ -2357,6 +2362,7 @@ uint64_t helper_float_truncl_s(uint32_t fst0)
{
uint64_t dt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
dt2 = float32_to_int64_round_to_zero(fst0, &env->active_fpu.fp_status);
update_fcr31();
if (GET_FP_CAUSE(env->active_fpu.fcr31) & (FP_OVERFLOW | FP_INVALID))
@@ -2368,6 +2374,7 @@ uint32_t helper_float_truncw_d(uint64_t fdt0)
{
uint32_t wt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
wt2 = float64_to_int32_round_to_zero(fdt0, &env->active_fpu.fp_status);
update_fcr31();
if (GET_FP_CAUSE(env->active_fpu.fcr31) & (FP_OVERFLOW | FP_INVALID))
@@ -2379,6 +2386,7 @@ uint32_t helper_float_truncw_s(uint32_t fst0)
{
uint32_t wt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
wt2 = float32_to_int32_round_to_zero(fst0, &env->active_fpu.fp_status);
update_fcr31();
if (GET_FP_CAUSE(env->active_fpu.fcr31) & (FP_OVERFLOW | FP_INVALID))
@@ -2390,6 +2398,7 @@ uint64_t helper_float_ceill_d(uint64_t fdt0)
{
uint64_t dt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_up, &env->active_fpu.fp_status);
dt2 = float64_to_int64(fdt0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2403,6 +2412,7 @@ uint64_t helper_float_ceill_s(uint32_t fst0)
{
uint64_t dt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_up, &env->active_fpu.fp_status);
dt2 = float32_to_int64(fst0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2416,6 +2426,7 @@ uint32_t helper_float_ceilw_d(uint64_t fdt0)
{
uint32_t wt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_up, &env->active_fpu.fp_status);
wt2 = float64_to_int32(fdt0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2429,6 +2440,7 @@ uint32_t helper_float_ceilw_s(uint32_t fst0)
{
uint32_t wt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_up, &env->active_fpu.fp_status);
wt2 = float32_to_int32(fst0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2442,6 +2454,7 @@ uint64_t helper_float_floorl_d(uint64_t fdt0)
{
uint64_t dt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_down, &env->active_fpu.fp_status);
dt2 = float64_to_int64(fdt0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2455,6 +2468,7 @@ uint64_t helper_float_floorl_s(uint32_t fst0)
{
uint64_t dt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_down, &env->active_fpu.fp_status);
dt2 = float32_to_int64(fst0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2468,6 +2482,7 @@ uint32_t helper_float_floorw_d(uint64_t fdt0)
{
uint32_t wt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_down, &env->active_fpu.fp_status);
wt2 = float64_to_int32(fdt0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
@@ -2481,6 +2496,7 @@ uint32_t helper_float_floorw_s(uint32_t fst0)
{
uint32_t wt2;
+ set_float_exception_flags(0, &env->active_fpu.fp_status);
set_float_rounding_mode(float_round_down, &env->active_fpu.fp_status);
wt2 = float32_to_int32(fst0, &env->active_fpu.fp_status);
RESTORE_ROUNDING_MODE;
next prev parent reply other threads:[~2011-02-09 3:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-09 3:03 [Qemu-devel] [MIPS] Clear softfpu exception state for round, trunc, ceil and floor Chris Dearman
2011-02-09 3:03 ` Chris Dearman [this message]
2011-02-09 18:46 ` Aurelien Jarno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110209030330.20220.14997.stgit@localhost6.localdomain6 \
--to=chris@mips.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).