qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Avi Kivity <avi@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>,
	Isaku Yamahata <yamahata@valinux.co.jp>,
	qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH] pci: add standard bridge device
Date: Sun, 4 Sep 2011 16:41:02 +0300	[thread overview]
Message-ID: <20110904134101.GA27239@redhat.com> (raw)
In-Reply-To: <4E63778A.6050002@redhat.com>

On Sun, Sep 04, 2011 at 04:05:14PM +0300, Avi Kivity wrote:
> It follows naturally:

OK, so it seems the following is more or less what you suggest?
I'm not sure I create/destroy subregions properly.
Both the alias and the subregion get the same start value?
Is the region name for debugging only?
When does priority matter? In case of overlap?

diff --git a/hw/pci.c b/hw/pci.c
index 57ff7b1..56dfa18 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -889,7 +889,6 @@ void pci_register_bar(PCIDevice *pci_dev, int region_num,
     r = &pci_dev->io_regions[region_num];
     r->addr = PCI_BAR_UNMAPPED;
     r->size = size;
-    r->filtered_size = size;
     r->type = type;
     r->memory = NULL;
 
@@ -920,41 +919,6 @@ pcibus_t pci_get_bar_addr(PCIDevice *pci_dev, int region_num)
     return pci_dev->io_regions[region_num].addr;
 }
 
-static void pci_bridge_filter(PCIDevice *d, pcibus_t *addr, pcibus_t *size,
-                              uint8_t type)
-{
-    pcibus_t base = *addr;
-    pcibus_t limit = *addr + *size - 1;
-    PCIDevice *br;
-
-    for (br = d->bus->parent_dev; br; br = br->bus->parent_dev) {
-        uint16_t cmd = pci_get_word(d->config + PCI_COMMAND);
-
-        if (type & PCI_BASE_ADDRESS_SPACE_IO) {
-            if (!(cmd & PCI_COMMAND_IO)) {
-                goto no_map;
-            }
-        } else {
-            if (!(cmd & PCI_COMMAND_MEMORY)) {
-                goto no_map;
-            }
-        }
-
-        base = MAX(base, pci_bridge_get_base(br, type));
-        limit = MIN(limit, pci_bridge_get_limit(br, type));
-    }
-
-    if (base > limit) {
-        goto no_map;
-    }
-    *addr = base;
-    *size = limit - base + 1;
-    return;
-no_map:
-    *addr = PCI_BAR_UNMAPPED;
-    *size = 0;
-}
-
 static pcibus_t pci_bar_address(PCIDevice *d,
 				int reg, uint8_t type, pcibus_t size)
 {
@@ -1024,7 +988,7 @@ static void pci_update_mappings(PCIDevice *d)
 {
     PCIIORegion *r;
     int i;
-    pcibus_t new_addr, filtered_size;
+    pcibus_t new_addr;
 
     for(i = 0; i < PCI_NUM_REGIONS; i++) {
         r = &d->io_regions[i];
@@ -1035,14 +999,8 @@ static void pci_update_mappings(PCIDevice *d)
 
         new_addr = pci_bar_address(d, i, r->type, r->size);
 
-        /* bridge filtering */
-        filtered_size = r->size;
-        if (new_addr != PCI_BAR_UNMAPPED) {
-            pci_bridge_filter(d, &new_addr, &filtered_size, r->type);
-        }
-
         /* This bar isn't changed */
-        if (new_addr == r->addr && filtered_size == r->filtered_size)
+        if (new_addr == r->addr)
             continue;
 
         /* now do the real mapping */
@@ -1050,15 +1008,7 @@ static void pci_update_mappings(PCIDevice *d)
             memory_region_del_subregion(r->address_space, r->memory);
         }
         r->addr = new_addr;
-        r->filtered_size = filtered_size;
         if (r->addr != PCI_BAR_UNMAPPED) {
-            /*
-             * TODO: currently almost all the map funcions assumes
-             * filtered_size == size and addr & ~(size - 1) == addr.
-             * However with bridge filtering, they aren't always true.
-             * Teach them such cases, such that filtered_size < size and
-             * addr & (size - 1) != 0.
-             */
             if (r->type & PCI_BASE_ADDRESS_SPACE_IO) {
                 memory_region_add_subregion_overlap(r->address_space,
                                                     r->addr,
@@ -1576,22 +1526,6 @@ PCIDevice *pci_nic_init_nofail(NICInfo *nd, const char *default_model,
     return res;
 }
 
-static void pci_bridge_update_mappings_fn(PCIBus *b, PCIDevice *d)
-{
-    pci_update_mappings(d);
-}
-
-void pci_bridge_update_mappings(PCIBus *b)
-{
-    PCIBus *child;
-
-    pci_for_each_device_under_bus(b, pci_bridge_update_mappings_fn);
-
-    QLIST_FOREACH(child, &b->child, sibling) {
-        pci_bridge_update_mappings(child);
-    }
-}
-
 /* Whether a given bus number is in range of the secondary
  * bus of the given bridge device. */
 static bool pci_secondary_bus_in_range(PCIDevice *dev, int bus_num)
diff --git a/hw/pci.h b/hw/pci.h
index 391217e..65e1568 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -90,7 +90,6 @@ typedef struct PCIIORegion {
     pcibus_t addr; /* current PCI mapping address. -1 means not mapped */
 #define PCI_BAR_UNMAPPED (~(pcibus_t)0)
     pcibus_t size;
-    pcibus_t filtered_size;
     uint8_t type;
     MemoryRegion *memory;
     MemoryRegion *address_space;
@@ -277,7 +276,6 @@ int pci_read_devaddr(Monitor *mon, const char *addr, int *domp, int *busp,
 
 void do_pci_info_print(Monitor *mon, const QObject *data);
 void do_pci_info(Monitor *mon, QObject **ret_data);
-void pci_bridge_update_mappings(PCIBus *b);
 
 void pci_device_deassert_intx(PCIDevice *dev);
 
diff --git a/hw/pci_bridge.c b/hw/pci_bridge.c
index e0b339e..469dfe8 100644
--- a/hw/pci_bridge.c
+++ b/hw/pci_bridge.c
@@ -135,6 +135,75 @@ pcibus_t pci_bridge_get_limit(const PCIDevice *bridge, uint8_t type)
     return limit;
 }
 
+static pcibus_t pci_bridge_get_size(const PCIDevice *bridge, uint8_t type)
+{
+    return pci_bridge_get_limit(bridge, type) >=
+        pci_bridge_get_base(bridge, type) ?
+        pci_bridge_get_limit(bridge, type) -
+        pci_bridge_get_base(bridge, type)  + 1 : 0;
+}
+
+static void pci_bridge_region_init(PCIBridge *br)
+{
+    PCIBus *sec_bus = &br->sec_bus;
+    PCIBus *parent = br->dev.bus;
+    memory_region_init_alias(sec_bus->alias_pref_mem, "pci_bridge_pref_mem",
+	     sec_bus->address_space_mem,
+	     pci_bridge_get_base(&br->dev, PCI_BASE_ADDRESS_MEM_PREFETCH),
+	     pci_bridge_get_size(&br->dev, PCI_BASE_ADDRESS_MEM_PREFETCH));
+    memory_region_add_subregion_overlap(parent->address_space_mem,
+	     pci_bridge_get_base(&br->dev, PCI_BASE_ADDRESS_MEM_PREFETCH),
+             sec_bus->alias_pref_mem, 1);
+    memory_region_init_alias(sec_bus->alias_mem, "pci_bridge_memory",
+	     sec_bus->address_space_mem,
+	     pci_bridge_get_base(&br->dev, PCI_BASE_ADDRESS_SPACE_MEMORY),
+	     pci_bridge_get_size(&br->dev, PCI_BASE_ADDRESS_SPACE_MEMORY));
+    memory_region_add_subregion_overlap(parent->address_space_mem,
+	     pci_bridge_get_base(&br->dev, PCI_BASE_ADDRESS_SPACE_MEMORY),
+             sec_bus->alias_mem, 1);
+    memory_region_init_alias(sec_bus->alias_io, "pci_bridge_io",
+	     sec_bus->address_space_io,
+	     pci_bridge_get_base(&br->dev, PCI_BASE_ADDRESS_SPACE_IO),
+	     pci_bridge_get_size(&br->dev, PCI_BASE_ADDRESS_SPACE_IO));
+    memory_region_add_subregion_overlap(parent->address_space_io,
+	     pci_bridge_get_base(&br->dev, PCI_BASE_ADDRESS_SPACE_IO),
+             sec_bus->alias_io, 1);
+}
+
+static void pci_bridge_region_cleanup(PCIBridge *br)
+{
+    PCIBus *sec_bus = &br->sec_bus;
+    PCIBus *parent = br->dev.bus;
+    memory_region_del_subregion(parent->address_space_mem,
+                                sec_bus->alias_pref_mem);
+    memory_region_destroy(sec_bus->alias_pref_mem);
+    memory_region_del_subregion(parent->address_space_mem,
+                                sec_bus->alias_mem);
+    memory_region_destroy(sec_bus->alias_mem);
+    memory_region_del_subregion(parent->address_space_io,
+                                sec_bus->alias_io);
+    memory_region_destroy(sec_bus->alias_io);
+}
+
+static void pci_bridge_update_mappings(PCIBridge *br)
+{
+    /* TODO: this doesn't handle the case of one VCPU
+     * updating the bridge while another accesses an unaffected
+     * region. To fix we'll need new memory region APIs. */
+    pci_bridge_region_cleanup(br);
+    pci_bridge_region_init(br);
+
+#if 0
+    TODO: do we need to propagate updates to child buses?
+
+    pci_for_each_device_under_bus(b, pci_bridge_update_mappings_fn);
+
+    QLIST_FOREACH(child, &b->child, sibling) {
+        pci_bridge_update_mappings(child);
+    }
+#endif
+}
+
 /* default write_config function for PCI-to-PCI bridge */
 void pci_bridge_write_config(PCIDevice *d,
                              uint32_t address, uint32_t val, int len)
@@ -151,7 +220,7 @@ void pci_bridge_write_config(PCIDevice *d,
         /* memory base/limit, prefetchable base/limit and
            io base/limit upper 16 */
         ranges_overlap(address, len, PCI_MEMORY_BASE, 20)) {
-        pci_bridge_update_mappings(&s->sec_bus);
+        pci_bridge_update_mappings(s);
     }
 
     newctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
@@ -247,9 +316,14 @@ int pci_bridge_initfn(PCIDevice *dev)
     sec_bus->parent_dev = dev;
     sec_bus->map_irq = br->map_irq;
     /* TODO: use memory API to perform memory filtering. */
-    sec_bus->address_space_mem = parent->address_space_mem;
-    sec_bus->address_space_io = parent->address_space_io;
-
+    sec_bus->address_space_mem = g_new(MemoryRegion, 1);
+    memory_region_init(sec_bus->address_space_mem, "pci_pridge_pci", INT64_MAX);
+    sec_bus->address_space_io = g_new(MemoryRegion, 1);
+    memory_region_init(sec_bus->address_space_io, "pci_bridge_io", 65536);
+    sec_bus->alias_pref_mem = g_new(MemoryRegion, 1);
+    sec_bus->alias_mem = g_new(MemoryRegion, 1);
+    sec_bus->alias_io = g_new(MemoryRegion, 1);
+    pci_bridge_region_init(br);
     QLIST_INIT(&sec_bus->child);
     QLIST_INSERT_HEAD(&parent->child, sec_bus, sibling);
     return 0;
@@ -259,8 +333,17 @@ int pci_bridge_initfn(PCIDevice *dev)
 int pci_bridge_exitfn(PCIDevice *pci_dev)
 {
     PCIBridge *s = DO_UPCAST(PCIBridge, dev, pci_dev);
+    PCIBus *sec_bus = &s->sec_bus;
     assert(QLIST_EMPTY(&s->sec_bus.child));
     QLIST_REMOVE(&s->sec_bus, sibling);
+    pci_bridge_region_cleanup(s);
+    g_free(sec_bus->alias_pref_mem);
+    g_free(sec_bus->alias_mem);
+    g_free(sec_bus->alias_io);
+    memory_region_destroy(sec_bus->address_space_mem);
+    g_free(sec_bus->address_space_mem);
+    memory_region_destroy(sec_bus->address_space_io);
+    g_free(sec_bus->address_space_io);
     /* qbus_free() is called automatically by qdev_free() */
     return 0;
 }
diff --git a/hw/pci_internals.h b/hw/pci_internals.h
index c7fd23d..578c8d2 100644
--- a/hw/pci_internals.h
+++ b/hw/pci_internals.h
@@ -27,6 +27,9 @@ struct PCIBus {
     target_phys_addr_t mem_base;
     MemoryRegion *address_space_mem;
     MemoryRegion *address_space_io;
+    MemoryRegion *alias_pref_mem;
+    MemoryRegion *alias_mem;
+    MemoryRegion *alias_io;
 
     QLIST_HEAD(, PCIBus) child; /* this will be replaced by qdev later */
     QLIST_ENTRY(PCIBus) sibling;/* this will be replaced by qdev later */

  parent reply	other threads:[~2011-09-04 13:40 UTC|newest]

Thread overview: 71+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-04  9:43 [Qemu-devel] [PATCH] pci: add standard bridge device Michael S. Tsirkin
2011-07-05 13:29 ` Isaku Yamahata
2011-07-05 13:43   ` Michael S. Tsirkin
2011-08-17  8:37 ` Wen Congyang
2011-08-18  3:22   ` Wen Congyang
2011-08-18 15:15     ` Avi Kivity
2011-08-19  5:12       ` Wen Congyang
2011-08-19 15:26         ` Avi Kivity
2011-08-22  3:13           ` Wen Congyang
2011-08-22  6:23             ` Avi Kivity
2011-09-02  1:32               ` Wen Congyang
2011-09-02  2:56               ` Wen Congyang
2011-09-04  8:25                 ` Avi Kivity
2011-09-06  3:06                   ` Wen Congyang
2011-09-06  7:45                     ` Avi Kivity
2011-09-07  4:39                       ` Wen Congyang
2011-09-07 11:52                         ` Michael S. Tsirkin
2011-09-08  6:15                           ` Wen Congyang
2011-09-08  7:26                             ` Wen Congyang
2011-09-08  9:43                               ` Gerd Hoffmann
2011-09-08  9:58                                 ` Wen Congyang
2011-09-08 10:42                                   ` Michael S. Tsirkin
2011-09-08 11:03                                     ` Wen Congyang
2011-09-08 11:13                                       ` Michael S. Tsirkin
2011-09-09  6:43           ` Wen Congyang
2011-09-09  7:12             ` Michael S. Tsirkin
2011-09-09  7:24               ` Wen Congyang
2011-09-09  7:34                 ` Michael S. Tsirkin
2011-09-09  7:35                   ` Wen Congyang
2011-08-26  9:43       ` Michael S. Tsirkin
2011-08-28  7:50         ` Avi Kivity
2011-08-28 11:41           ` Michael S. Tsirkin
2011-08-28 13:10             ` Avi Kivity
2011-08-28 13:42               ` Michael S. Tsirkin
2011-08-28 13:53                 ` Avi Kivity
2011-09-04 12:30                   ` Michael S. Tsirkin
2011-09-04 12:40                     ` Avi Kivity
2011-09-04 13:01                       ` Michael S. Tsirkin
2011-09-04 13:05                         ` Avi Kivity
2011-09-04 13:09                           ` Avi Kivity
2011-09-04 13:41                           ` Michael S. Tsirkin [this message]
2011-09-04 13:55                             ` Avi Kivity
2011-09-04 14:21                               ` Michael S. Tsirkin
2011-09-04 14:36                                 ` Avi Kivity
2011-09-04 14:54                                   ` Michael S. Tsirkin
2011-09-04 15:14                                     ` Avi Kivity
2011-09-04 15:24                                       ` Michael S. Tsirkin
2011-09-04 15:37                                         ` Avi Kivity
2011-09-04 15:45                                           ` Michael S. Tsirkin
2011-09-04 15:46                                             ` Avi Kivity
2011-09-04 16:19                                               ` Michael S. Tsirkin
2011-09-04 16:22                                                 ` Avi Kivity
2011-09-04 17:03                                                   ` Michael S. Tsirkin
2011-09-05  5:36                                                     ` Avi Kivity
2011-09-04 15:26                                   ` Michael S. Tsirkin
2011-09-04 15:42                                     ` Avi Kivity
2011-09-04 15:46                                       ` Michael S. Tsirkin
2011-09-04 15:49                                         ` Avi Kivity
2011-09-04 16:20                                           ` Michael S. Tsirkin
2011-08-26  9:57     ` Michael S. Tsirkin
2011-09-04 17:11 ` Michael S. Tsirkin
2011-09-05  8:17   ` Markus Armbruster
2011-09-05  9:38     ` Michael S. Tsirkin
2011-09-05  9:53       ` Gerd Hoffmann
2011-09-05 11:40         ` Michael S. Tsirkin
2011-09-06  9:18         ` Markus Armbruster
     [not found] ` <4E801927.8020708@cn.fujitsu.com>
     [not found]   ` <20110926070824.GB5860@redhat.com>
     [not found]     ` <4EAF4AFD.6040102@cn.fujitsu.com>
     [not found]       ` <20111101084439.GA11958@redhat.com>
2011-11-01  8:49         ` Wen Congyang
2011-11-01 11:48           ` Michael S. Tsirkin
2011-11-02  1:00             ` Wen Congyang
2011-11-02  2:15           ` Isaku Yamahata
2011-11-02  2:38             ` Wen Congyang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110904134101.GA27239@redhat.com \
    --to=mst@redhat.com \
    --cc=avi@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=yamahata@valinux.co.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).