From: Marcelo Tosatti <mtosatti@redhat.com>
To: stefanha@linux.vnet.ibm.com, kwolf@redhat.com, qemu-devel@nongnu.org
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Subject: [Qemu-devel] [patch 3/4] block stream: add support for partial streaming
Date: Wed, 04 Jan 2012 12:08:57 -0200 [thread overview]
Message-ID: <20120104140945.618799948@redhat.com> (raw)
In-Reply-To: 20120104140854.631720304@redhat.com
[-- Attachment #1: block-stream-base --]
[-- Type: text/plain, Size: 7104 bytes --]
Add support for streaming data from an intermediate section of the
image chain (see patch and documentation for details).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Index: stefanha/block.c
===================================================================
--- stefanha.orig/block.c
+++ stefanha/block.c
@@ -2229,6 +2229,70 @@ int bdrv_is_allocated(BlockDriverState *
return data.ret;
}
+/*
+ * Given an image chain: [BASE] -> [INTER1] -> [INTER2] -> [TOP]
+ *
+ * Return true if the given sector is allocated in top or base.
+ * Return false if the given sector is allocated in intermediate images.
+ *
+ * 'pnum' is set to the number of sectors (including and immediately following
+ * the specified sector) that are known to be in the same
+ * allocated/unallocated state.
+ *
+ */
+int coroutine_fn bdrv_co_is_allocated_base(BlockDriverState *top,
+ BlockDriverState *base,
+ int64_t sector_num,
+ int nb_sectors, int *pnum)
+{
+ BlockDriverState *intermediate;
+ int ret, n;
+
+ ret = bdrv_co_is_allocated(top, sector_num, nb_sectors, &n);
+ if (ret) {
+ *pnum = n;
+ return ret;
+ }
+
+ /*
+ * Is the unallocated chunk [sector_num, n] also
+ * unallocated between base and top?
+ */
+ intermediate = top->backing_hd;
+
+ while (intermediate) {
+ int pnum_inter;
+
+ /* reached base */
+ if (intermediate == base) {
+ *pnum = n;
+ return 1;
+ }
+ ret = bdrv_co_is_allocated(intermediate, sector_num, nb_sectors,
+ &pnum_inter);
+ if (ret < 0) {
+ return ret;
+ } else if (ret) {
+ *pnum = pnum_inter;
+ return 0;
+ }
+
+ /*
+ * [sector_num, nb_sectors] is unallocated on top but intermediate
+ * might have
+ *
+ * [sector_num+x, nr_sectors] allocated.
+ */
+ if (n > pnum_inter) {
+ n = pnum_inter;
+ }
+
+ intermediate = intermediate->backing_hd;
+ }
+
+ return 1;
+}
+
void bdrv_mon_event(const BlockDriverState *bdrv,
BlockMonEventAction action, int is_read)
{
Index: stefanha/block.h
===================================================================
--- stefanha.orig/block.h
+++ stefanha/block.h
@@ -222,6 +222,10 @@ int bdrv_co_discard(BlockDriverState *bs
int bdrv_has_zero_init(BlockDriverState *bs);
int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
int *pnum);
+int coroutine_fn bdrv_co_is_allocated_base(BlockDriverState *top,
+ BlockDriverState *base,
+ int64_t sector_num, int nb_sectors,
+ int *pnum);
#define BIOS_ATA_TRANSLATION_AUTO 0
#define BIOS_ATA_TRANSLATION_NONE 1
Index: stefanha/block/stream.c
===================================================================
--- stefanha.orig/block/stream.c
+++ stefanha/block/stream.c
@@ -57,6 +57,7 @@ typedef struct StreamBlockJob {
BlockJob common;
RateLimit limit;
BlockDriverState *base;
+ char backing_file_id[1024];
} StreamBlockJob;
static int coroutine_fn stream_populate(BlockDriverState *bs,
@@ -79,6 +80,7 @@ static void coroutine_fn stream_run(void
{
StreamBlockJob *s = opaque;
BlockDriverState *bs = s->common.bs;
+ BlockDriverState *base = s->base;
int64_t sector_num, end;
int ret = 0;
int n;
@@ -97,8 +99,17 @@ retry:
break;
}
- ret = bdrv_co_is_allocated(bs, sector_num,
- STREAM_BUFFER_SIZE / BDRV_SECTOR_SIZE, &n);
+
+ if (base) {
+ ret = bdrv_co_is_allocated_base(bs, base, sector_num,
+ STREAM_BUFFER_SIZE /
+ BDRV_SECTOR_SIZE,
+ &n);
+ } else {
+ ret = bdrv_co_is_allocated(bs, sector_num,
+ STREAM_BUFFER_SIZE / BDRV_SECTOR_SIZE,
+ &n);
+ }
trace_stream_one_iteration(s, sector_num, n, ret);
if (ret == 0) {
if (s->common.speed) {
@@ -115,6 +126,7 @@ retry:
if (ret < 0) {
break;
}
+ ret = 0;
/* Publish progress */
s->common.offset += n * BDRV_SECTOR_SIZE;
@@ -129,7 +141,10 @@ retry:
bdrv_disable_zero_detection(bs);
if (sector_num == end && ret == 0) {
- bdrv_change_backing_file(bs, NULL, NULL);
+ const char *base_id = NULL;
+ if (base)
+ base_id = s->backing_file_id;
+ bdrv_change_backing_file(bs, base_id, NULL);
}
qemu_vfree(buf);
@@ -155,7 +170,8 @@ static BlockJobType stream_job_type = {
};
int stream_start(BlockDriverState *bs, BlockDriverState *base,
- BlockDriverCompletionFunc *cb, void *opaque)
+ const char *base_id, BlockDriverCompletionFunc *cb,
+ void *opaque)
{
StreamBlockJob *s;
Coroutine *co;
@@ -166,6 +182,8 @@ int stream_start(BlockDriverState *bs, B
s = block_job_create(&stream_job_type, bs, cb, opaque);
s->base = base;
+ if (base_id)
+ pstrcpy(s->backing_file_id, sizeof(s->backing_file_id), base_id);
co = qemu_coroutine_create(stream_run);
trace_stream_start(bs, base, s, co, opaque);
Index: stefanha/blockdev.c
===================================================================
--- stefanha.orig/blockdev.c
+++ stefanha/blockdev.c
@@ -931,6 +931,7 @@ void qmp_block_stream(const char *device
const char *base, Error **errp)
{
BlockDriverState *bs;
+ BlockDriverState *base_bs = NULL;
int ret;
bs = bdrv_find(device);
@@ -939,13 +940,15 @@ void qmp_block_stream(const char *device
return;
}
- /* Base device not supported */
if (base) {
- error_set(errp, QERR_NOT_SUPPORTED);
- return;
+ base_bs = bdrv_find_backing_image(bs, base);
+ if (base_bs == NULL) {
+ error_set(errp, QERR_BASE_ID_NOT_FOUND, base);
+ return;
+ }
}
- ret = stream_start(bs, NULL, block_stream_cb, bs);
+ ret = stream_start(bs, base_bs, base, block_stream_cb, bs);
if (ret < 0) {
switch (ret) {
case -EBUSY:
Index: stefanha/block_int.h
===================================================================
--- stefanha.orig/block_int.h
+++ stefanha/block_int.h
@@ -380,6 +380,7 @@ static inline bool block_job_is_cancelle
}
int stream_start(BlockDriverState *bs, BlockDriverState *base,
- BlockDriverCompletionFunc *cb, void *opaque);
+ const char *base_id, BlockDriverCompletionFunc *cb,
+ void *opaque);
#endif /* BLOCK_INT_H */
next prev parent reply other threads:[~2012-01-04 14:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-30 10:03 [Qemu-devel] [patch 0/5] block streaming base support Marcelo Tosatti
2011-12-30 10:03 ` [Qemu-devel] [patch 1/5] block: add bdrv_find_backing_image Marcelo Tosatti
2011-12-30 10:03 ` [Qemu-devel] [patch 2/5] block: implement bdrv_find_backing_image in qcow2 Marcelo Tosatti
2012-01-03 13:44 ` Stefan Hajnoczi
2011-12-30 10:03 ` [Qemu-devel] [patch 3/5] add QERR_BASE_ID_NOT_FOUND Marcelo Tosatti
2011-12-30 10:03 ` [Qemu-devel] [patch 4/5] block stream: add support for partial streaming Marcelo Tosatti
2012-01-04 12:39 ` Stefan Hajnoczi
2012-01-04 13:52 ` Marcelo Tosatti
2011-12-30 10:03 ` [Qemu-devel] [patch 5/5] add doc to describe live block operations Marcelo Tosatti
2012-01-04 14:08 ` [Qemu-devel] [patch 0/4] block streaming base support (v2) Marcelo Tosatti
2012-01-04 14:08 ` [Qemu-devel] [patch 1/4] block: add bdrv_find_backing_image Marcelo Tosatti
2012-01-04 14:08 ` [Qemu-devel] [patch 2/4] add QERR_BASE_ID_NOT_FOUND Marcelo Tosatti
2012-01-04 14:08 ` Marcelo Tosatti [this message]
2012-01-04 16:02 ` [Qemu-devel] [patch 3/4] block stream: add support for partial streaming Eric Blake
2012-01-04 17:47 ` Marcelo Tosatti
2012-01-04 18:03 ` Eric Blake
2012-01-04 19:22 ` Marcelo Tosatti
2012-01-04 22:40 ` Stefan Hajnoczi
2012-01-05 7:46 ` Paolo Bonzini
2012-01-09 10:58 ` Kevin Wolf
2012-01-09 13:14 ` Stefan Hajnoczi
2012-01-04 14:08 ` [Qemu-devel] [patch 4/4] add doc to describe live block operations Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120104140945.618799948@redhat.com \
--to=mtosatti@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).