From: "Michael S. Tsirkin" <mst@redhat.com>
To: Alex Williamson <alex.williamson@redhat.com>
Cc: jan.kiszka@siemens.com, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v2 1/6] msix: Add simple BAR allocation MSIX setup functions
Date: Thu, 14 Jun 2012 13:29:11 +0300 [thread overview]
Message-ID: <20120614102910.GD5778@redhat.com> (raw)
In-Reply-To: <20120614045118.11034.11599.stgit@bling.home>
On Wed, Jun 13, 2012 at 10:51:19PM -0600, Alex Williamson wrote:
> msi_init() takes over a BAR without really specifying or allowing
> specification of how it does so. Instead, let's split it into
> two interfaces, one fully specified, and one trivially easy. This
> implements the latter. msix_init_exclusive_bar() takes over
> allocating and filling a PCI BAR _exclusively_ for the use of MSIX.
> When used, the matching msi_uninit_exclusive_bar() should be used
> to tear it down.
>
> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> ---
>
> hw/msix.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> hw/msix.h | 3 +++
> hw/pci.h | 2 ++
> 3 files changed, 48 insertions(+)
>
> diff --git a/hw/msix.c b/hw/msix.c
> index b64f109..a4cdfb0 100644
> --- a/hw/msix.c
> +++ b/hw/msix.c
> @@ -299,6 +299,41 @@ err_config:
> return ret;
> }
>
> +int msix_init_exclusive_bar(PCIDevice *dev, unsigned short nentries,
> + uint8_t bar_nr)
> +{
> + int ret;
> + char *name;
> +
> + /*
> + * Migration compatibility dictates that this remains a 4k
> + * BAR with the vector table in the lower half and PBA in
> + * the upper half.
> + */
> + if (nentries * PCI_MSIX_ENTRY_SIZE > 2048) {
> + return -EINVAL;
> + }
> +
> + if (asprintf(&name, "%s MSIX BAR", dev->name) == -1) {
> + return -ENOMEM;
> + }
> +
I think we should avoid spaces in names.
Also let's use lower case. And BAR is confusing IMO:
it's not a base address register, it's the region.
So I would prefer simply: "%s-msix".
> + memory_region_init(&dev->msix_exclusive_bar, name, 4096);
> +
> + free(name);
> +
> + ret = msix_init(dev, nentries, &dev->msix_exclusive_bar, bar_nr, 4096);
> + if (ret) {
> + memory_region_destroy(&dev->msix_exclusive_bar);
> + return ret;
> + }
> +
> + pci_register_bar(dev, bar_nr, PCI_BASE_ADDRESS_SPACE_MEMORY,
> + &dev->msix_exclusive_bar);
> +
> + return 0;
> +}
> +
> static void msix_free_irq_entries(PCIDevice *dev)
> {
> int vector;
> @@ -329,6 +364,14 @@ int msix_uninit(PCIDevice *dev, MemoryRegion *bar)
> return 0;
> }
>
> +void msix_uninit_exclusive_bar(PCIDevice *dev)
> +{
> + if (msix_present(dev)) {
> + msix_uninit(dev, &dev->msix_exclusive_bar);
> + memory_region_destroy(&dev->msix_exclusive_bar);
> + }
> +}
> +
> void msix_save(PCIDevice *dev, QEMUFile *f)
> {
> unsigned n = dev->msix_entries_nr;
> diff --git a/hw/msix.h b/hw/msix.h
> index e5a488d..bed6bfb 100644
> --- a/hw/msix.h
> +++ b/hw/msix.h
> @@ -7,11 +7,14 @@
> int msix_init(PCIDevice *pdev, unsigned short nentries,
> MemoryRegion *bar,
> unsigned bar_nr, unsigned bar_size);
> +int msix_init_exclusive_bar(PCIDevice *dev, unsigned short nentries,
> + uint8_t bar_nr);
>
> void msix_write_config(PCIDevice *pci_dev, uint32_t address,
> uint32_t val, int len);
>
> int msix_uninit(PCIDevice *d, MemoryRegion *bar);
> +void msix_uninit_exclusive_bar(PCIDevice *dev);
>
> unsigned int msix_nr_vectors_allocated(const PCIDevice *dev);
>
> diff --git a/hw/pci.h b/hw/pci.h
> index 4c96268..d517a54 100644
> --- a/hw/pci.h
> +++ b/hw/pci.h
> @@ -226,6 +226,8 @@ struct PCIDevice {
>
> /* Space to store MSIX table */
> uint8_t *msix_table_page;
> + /* MemoryRegion container for msix exclusive BAR setup */
> + MemoryRegion msix_exclusive_bar;
> /* MMIO index used to map MSIX table and pending bit entries. */
> MemoryRegion msix_mmio;
> /* Reference-count for entries actually in use by driver. */
next prev parent reply other threads:[~2012-06-14 10:28 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-14 4:51 [Qemu-devel] [PATCH v2 0/6] msix: Support specifying offsets, BARs, and capability location Alex Williamson
2012-06-14 4:51 ` [Qemu-devel] [PATCH v2 1/6] msix: Add simple BAR allocation MSIX setup functions Alex Williamson
2012-06-14 10:29 ` Michael S. Tsirkin [this message]
2012-06-14 14:24 ` Alex Williamson
2012-06-14 15:49 ` Michael S. Tsirkin
2012-06-14 15:55 ` Jan Kiszka
2012-06-14 16:05 ` Michael S. Tsirkin
2012-06-14 16:10 ` Alex Williamson
2012-06-14 16:31 ` Michael S. Tsirkin
2012-06-14 16:11 ` Jan Kiszka
2012-06-14 16:35 ` Michael S. Tsirkin
2012-06-14 4:51 ` [Qemu-devel] [PATCH v2 2/6] ivshmem: Convert to msix_init_exclusive_bar() interface Alex Williamson
2012-06-14 6:01 ` Jan Kiszka
2012-06-14 13:54 ` Alex Williamson
2012-06-14 4:51 ` [Qemu-devel] [PATCH v2 3/6] virtio: " Alex Williamson
2012-06-14 4:51 ` [Qemu-devel] [PATCH v2 4/6] msix: Split PBA into it's own MemoryRegion Alex Williamson
2012-06-14 6:13 ` Jan Kiszka
2012-06-14 13:56 ` Alex Williamson
2012-06-14 10:24 ` Michael S. Tsirkin
2012-06-14 14:21 ` Alex Williamson
2012-06-14 14:50 ` Michael S. Tsirkin
2012-06-14 15:09 ` Alex Williamson
2012-06-14 15:45 ` Michael S. Tsirkin
2012-06-14 16:02 ` Alex Williamson
2012-06-14 16:26 ` Michael S. Tsirkin
2012-06-14 4:51 ` [Qemu-devel] [PATCH v2 5/6] msix: Allow full specification of MSIX layout Alex Williamson
2012-06-14 6:17 ` Jan Kiszka
2012-06-14 8:12 ` Michael S. Tsirkin
2012-06-14 14:12 ` Alex Williamson
2012-06-14 8:10 ` Michael S. Tsirkin
2012-06-14 14:15 ` Alex Williamson
2012-06-14 4:52 ` [Qemu-devel] [PATCH v2 6/6] msix: Fix last PCIDevice naming inconsitency Alex Williamson
2012-06-14 8:13 ` Michael S. Tsirkin
2012-06-14 14:18 ` Alex Williamson
2012-06-14 14:21 ` Michael S. Tsirkin
2012-06-14 15:06 ` Michael S. Tsirkin
2012-06-14 15:08 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120614102910.GD5778@redhat.com \
--to=mst@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=jan.kiszka@siemens.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).