qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: Stefan Weil <sw@weilnetz.de>
Cc: Blue Swirl <blauwirbel@gmail.com>, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH stable] tci: Fix for AREG0 free mode
Date: Thu, 27 Sep 2012 21:29:02 +0200	[thread overview]
Message-ID: <20120927192902.GA20151@ohm.aurel32.net> (raw)
In-Reply-To: <1348001018-9963-1-git-send-email-sw@weilnetz.de>

On Tue, Sep 18, 2012 at 10:43:38PM +0200, Stefan Weil wrote:
> Support for helper functions with 5 arguments was missing
> in the code generator and in the interpreter.
> 
> There is no need to pass the constant TCG_AREG0 from the
> code generator to the interpreter. Remove that code for
> the INDEX_op_qemu_st* opcodes.
> 
> Signed-off-by: Stefan Weil <sw@weilnetz.de>
> ---
> 
> This patch is also needed for stable-1.2.
> 
> Regards
> 
> Stefan Weil
> 
> 
>  tcg/tci/tcg-target.c |   10 +++++-----
>  tci.c                |   13 +++++++++----
>  2 files changed, 14 insertions(+), 9 deletions(-)
> 
> diff --git a/tcg/tci/tcg-target.c b/tcg/tci/tcg-target.c
> index 3f4a24b..d272a90 100644
> --- a/tcg/tci/tcg-target.c
> +++ b/tcg/tci/tcg-target.c
> @@ -300,7 +300,7 @@ static const int tcg_target_reg_alloc_order[] = {
>  #endif
>  };
>  
> -#if MAX_OPC_PARAM_IARGS != 4
> +#if MAX_OPC_PARAM_IARGS != 5
>  # error Fix needed, number of supported input arguments changed!
>  #endif
>  
> @@ -309,16 +309,18 @@ static const int tcg_target_call_iarg_regs[] = {
>      TCG_REG_R1,
>      TCG_REG_R2,
>      TCG_REG_R3,
> -#if TCG_TARGET_REG_BITS == 32
> -    /* 32 bit hosts need 2 * MAX_OPC_PARAM_IARGS registers. */
>  #if 0 /* used for TCG_REG_CALL_STACK */
>      TCG_REG_R4,
>  #endif
>      TCG_REG_R5,
> +#if TCG_TARGET_REG_BITS == 32
> +    /* 32 bit hosts need 2 * MAX_OPC_PARAM_IARGS registers. */
>      TCG_REG_R6,
>      TCG_REG_R7,
>  #if TCG_TARGET_NB_REGS >= 16
>      TCG_REG_R8,
> +    TCG_REG_R9,
> +    TCG_REG_R10,
>  #else
>  # error Too few input registers available
>  #endif
> @@ -798,7 +800,6 @@ static void tcg_out_op(TCGContext *s, TCGOpcode opc, const TCGArg *args,
>      case INDEX_op_qemu_st8:
>      case INDEX_op_qemu_st16:
>      case INDEX_op_qemu_st32:
> -        tcg_out_r(s, TCG_AREG0);
>          tcg_out_r(s, *args++);
>          tcg_out_r(s, *args++);
>  #if TARGET_LONG_BITS > TCG_TARGET_REG_BITS
> @@ -809,7 +810,6 @@ static void tcg_out_op(TCGContext *s, TCGOpcode opc, const TCGArg *args,
>  #endif
>          break;
>      case INDEX_op_qemu_st64:
> -        tcg_out_r(s, TCG_AREG0);
>          tcg_out_r(s, *args++);
>  #if TCG_TARGET_REG_BITS == 32
>          tcg_out_r(s, *args++);
> diff --git a/tci.c b/tci.c
> index ce8a988..a4f7b78 100644
> --- a/tci.c
> +++ b/tci.c
> @@ -36,17 +36,19 @@
>          tcg_abort(); \
>      } while (0)
>  
> -#if MAX_OPC_PARAM_IARGS != 4
> +#if MAX_OPC_PARAM_IARGS != 5
>  # error Fix needed, number of supported input arguments changed!
>  #endif
>  #if TCG_TARGET_REG_BITS == 32
>  typedef uint64_t (*helper_function)(tcg_target_ulong, tcg_target_ulong,
>                                      tcg_target_ulong, tcg_target_ulong,
>                                      tcg_target_ulong, tcg_target_ulong,
> +                                    tcg_target_ulong, tcg_target_ulong,
>                                      tcg_target_ulong, tcg_target_ulong);
>  #else
>  typedef uint64_t (*helper_function)(tcg_target_ulong, tcg_target_ulong,
> -                                    tcg_target_ulong, tcg_target_ulong);
> +                                    tcg_target_ulong, tcg_target_ulong,
> +                                    tcg_target_ulong);
>  #endif
>  
>  /* TCI can optionally use a global register variable for env. */
> @@ -489,14 +491,17 @@ tcg_target_ulong tcg_qemu_tb_exec(CPUArchState *cpustate, uint8_t *tb_ptr)
>                                            tci_read_reg(TCG_REG_R5),
>                                            tci_read_reg(TCG_REG_R6),
>                                            tci_read_reg(TCG_REG_R7),
> -                                          tci_read_reg(TCG_REG_R8));
> +                                          tci_read_reg(TCG_REG_R8),
> +                                          tci_read_reg(TCG_REG_R9),
> +                                          tci_read_reg(TCG_REG_R10));
>              tci_write_reg(TCG_REG_R0, tmp64);
>              tci_write_reg(TCG_REG_R1, tmp64 >> 32);
>  #else
>              tmp64 = ((helper_function)t0)(tci_read_reg(TCG_REG_R0),
>                                            tci_read_reg(TCG_REG_R1),
>                                            tci_read_reg(TCG_REG_R2),
> -                                          tci_read_reg(TCG_REG_R3));
> +                                          tci_read_reg(TCG_REG_R3),
> +                                          tci_read_reg(TCG_REG_R5));
>              tci_write_reg(TCG_REG_R0, tmp64);
>  #endif
>              break;
> -- 

Thanks, applied.

-- 
Aurelien Jarno                          GPG: 1024D/F1BCDB73
aurelien@aurel32.net                 http://www.aurel32.net

      parent reply	other threads:[~2012-09-27 19:29 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-18 20:43 [Qemu-devel] [PATCH stable] tci: Fix for AREG0 free mode Stefan Weil
2012-09-27 18:49 ` Stefan Weil
2012-09-27 19:29 ` Aurelien Jarno [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120927192902.GA20151@ohm.aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=blauwirbel@gmail.com \
    --cc=qemu-devel@nongnu.org \
    --cc=sw@weilnetz.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).