From: BALATON Zoltan <balaton@eik.bme.hu>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 3/4 v5] vmware_vga: Return a value for FB_SIZE before the device is enabled
Date: Sat, 3 Nov 2012 12:47:08 +0100 (CET) [thread overview]
Message-ID: <20121103124120.0EE5D614@mono.eik.bme.hu> (raw)
In-Reply-To: <alpine.GSO.2.00.1211020219290.15462@mono>
According to the documentation drivers using this device should read
FB_SIZE before enabling the device to know what memory to map. This
would not work if we return 0 before enabled. The docs also mention
reading SVGA_REG_DEPTH but not writing it. (Only SVGA_REG_BITS_PER_PIXEL
can be written but we don't really support that either.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
hw/vmware_vga.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
v5: rebased again
diff --git a/hw/vmware_vga.c b/hw/vmware_vga.c
index 240443b..038994e 100644
--- a/hw/vmware_vga.c
+++ b/hw/vmware_vga.c
@@ -31,13 +31,14 @@
#define HW_FILL_ACCEL
#define HW_MOUSE_ACCEL
-# include "vga_int.h"
+#include "vga_int.h"
+
+/* See http://vmware-svga.sf.net/ for some documentation on VMWare SVGA */
struct vmsvga_state_s {
VGACommonState vga;
int invalidated;
- int depth;
int enable;
int config;
struct {
@@ -55,7 +56,6 @@ struct vmsvga_state_s {
uint32_t guest;
uint32_t svgaid;
int syncing;
- int fb_size;
MemoryRegion fifo_ram;
uint8_t *fifo_ptr;
@@ -756,10 +756,10 @@ static uint32_t vmsvga_value_read(void *opaque, uint32_t address)
return 0x0;
case SVGA_REG_VRAM_SIZE:
- return s->vga.vram_size;
+ return s->vga.vram_size; /* No physical VRAM besides the framebuffer */
case SVGA_REG_FB_SIZE:
- return s->fb_size;
+ return s->vga.vram_size;
case SVGA_REG_CAPABILITIES:
caps = SVGA_CAP_NONE;
@@ -848,7 +848,6 @@ static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
s->invalidated = 1;
s->vga.invalidate(&s->vga);
if (s->enable) {
- s->fb_size = ((s->depth + 7) >> 3) * s->new_width * s->new_height;
vga_dirty_log_stop(&s->vga);
} else {
vga_dirty_log_start(&s->vga);
@@ -873,10 +872,9 @@ static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
}
break;
- case SVGA_REG_DEPTH:
case SVGA_REG_BITS_PER_PIXEL:
if (value != ds_get_bits_per_pixel(s->vga.ds)) {
- printf("%s: Bad colour depth: %i bits\n", __func__, value);
+ printf("%s: Bad bits per pixel: %i bits\n", __func__, value);
s->config = 0;
}
break;
@@ -939,6 +937,7 @@ static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
#endif
break;
+ case SVGA_REG_DEPTH:
case SVGA_REG_MEM_REGS:
case SVGA_REG_NUM_DISPLAYS:
case SVGA_REG_PITCHLOCK:
@@ -1077,7 +1076,7 @@ static const VMStateDescription vmstate_vmware_vga_internal = {
.minimum_version_id_old = 0,
.post_load = vmsvga_post_load,
.fields = (VMStateField[]) {
- VMSTATE_INT32_EQUAL(depth, struct vmsvga_state_s),
+ VMSTATE_UNUSED(4), /* was depth */
VMSTATE_INT32(enable, struct vmsvga_state_s),
VMSTATE_INT32(config, struct vmsvga_state_s),
VMSTATE_INT32(cursor.id, struct vmsvga_state_s),
@@ -1092,7 +1091,7 @@ static const VMStateDescription vmstate_vmware_vga_internal = {
VMSTATE_UINT32(guest, struct vmsvga_state_s),
VMSTATE_UINT32(svgaid, struct vmsvga_state_s),
VMSTATE_INT32(syncing, struct vmsvga_state_s),
- VMSTATE_INT32(fb_size, struct vmsvga_state_s),
+ VMSTATE_UNUSED(4), /* was fb_size */
VMSTATE_END_OF_LIST()
}
};
--
1.7.10
next prev parent reply other threads:[~2012-11-03 12:41 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-03 9:22 [Qemu-devel] [PATCH 0/3] vmware_vga: Cleanup and allow simple drivers to work without the fifo BALATON Zoltan
2012-10-03 9:30 ` [Qemu-devel] [PATCH 1/3 v2] vmware_vga: Cleanup and remove duplicated info from local state BALATON Zoltan
2012-10-03 9:42 ` Paolo Bonzini
2012-10-03 9:30 ` [Qemu-devel] [PATCH 2/3 v2] vmware_vga: Return a value for FB_SIZE before the device is enabled BALATON Zoltan
2012-10-03 9:43 ` Paolo Bonzini
2012-10-03 9:31 ` [Qemu-devel] [PATCH 3/3 v2] vmware_vga: Allow simple drivers to work without using the fifo BALATON Zoltan
2012-10-03 9:46 ` Paolo Bonzini
2012-10-06 18:33 ` [Qemu-devel] [PATCH 1/4 v3] vmware_vga: Coding style cleanup BALATON Zoltan
2012-10-18 19:07 ` BALATON Zoltan
2012-10-29 10:38 ` BALATON Zoltan
2012-10-30 18:50 ` Blue Swirl
2012-10-31 1:08 ` [Qemu-devel] [PATCH 1/4 v4] " BALATON Zoltan
2012-11-02 1:20 ` [Qemu-devel] [PATCH 1/4 v5] " BALATON Zoltan
2012-11-02 1:20 ` [Qemu-devel] [PATCH 2/4 v5] vmware_vga: Remove duplicated info from local state BALATON Zoltan
2012-11-02 1:21 ` [Qemu-devel] [PATCH 3/4 v5] vmware_vga: Return a value for FB_SIZE before the device is enabled BALATON Zoltan
2012-11-02 1:21 ` [Qemu-devel] [PATCH 4/4 v5] vmware_vga: Allow simple drivers to work without using the fifo BALATON Zoltan
2012-11-03 9:51 ` [Qemu-devel] [PATCH 1/4 v5] vmware_vga: Coding style cleanup Blue Swirl
2012-11-03 12:51 ` BALATON Zoltan
2012-11-03 10:58 ` BALATON Zoltan
2012-11-03 10:58 ` [Qemu-devel] [PATCH 2/4 v5] vmware_vga: Remove duplicated info from local state BALATON Zoltan
2012-11-04 6:39 ` Jan Kiszka
2012-11-04 10:20 ` BALATON Zoltan
2012-11-04 17:58 ` BALATON Zoltan
2012-11-03 10:58 ` [Qemu-devel] [PATCH 3/4 v5] vmware_vga: Return a value for FB_SIZE before the device is enabled BALATON Zoltan
2012-11-03 10:59 ` [Qemu-devel] [PATCH 4/4 v5] vmware_vga: Allow simple drivers to work without using the fifo BALATON Zoltan
2012-11-03 11:47 ` [Qemu-devel] [PATCH 2/4 v5] vmware_vga: Remove duplicated info from local state BALATON Zoltan
2012-11-03 11:47 ` [Qemu-devel] [PATCH 4/4 v5] vmware_vga: Allow simple drivers to work without using the fifo BALATON Zoltan
2012-11-03 11:47 ` BALATON Zoltan [this message]
2012-11-03 11:47 ` [Qemu-devel] [PATCH 1/4 v5] vmware_vga: Coding style cleanup BALATON Zoltan
2012-11-03 15:20 ` Blue Swirl
2012-11-03 11:47 ` [Qemu-devel] [PATCH 4/4 v5] vmware_vga: Allow simple drivers to work without using the fifo BALATON Zoltan
2012-11-03 11:47 ` [Qemu-devel] [PATCH 3/4 v5] vmware_vga: Return a value for FB_SIZE before the device is enabled BALATON Zoltan
2012-11-03 11:47 ` [Qemu-devel] [PATCH 2/4 v5] vmware_vga: Remove duplicated info from local state BALATON Zoltan
2012-11-03 11:47 ` [Qemu-devel] [PATCH 1/4 v5] vmware_vga: Coding style cleanup BALATON Zoltan
2012-10-31 1:08 ` [Qemu-devel] [PATCH 2/4 v4] vmware_vga: Remove duplicated info from local state BALATON Zoltan
2012-10-31 1:09 ` [Qemu-devel] [PATCH 3/4 v4] vmware_vga: Return a value for FB_SIZE before the device is enabled BALATON Zoltan
2012-10-31 1:10 ` [Qemu-devel] [PATCH 4/4 v4] vmware_vga: Allow simple drivers to work without using the fifo BALATON Zoltan
2012-10-31 1:12 ` [Qemu-devel] [PATCH 1/4 v3] vmware_vga: Coding style cleanup BALATON Zoltan
2012-10-06 18:34 ` [Qemu-devel] [PATCH 2/4 v3] vmware_vga: Remove duplicated info from local state BALATON Zoltan
2012-10-06 18:35 ` [Qemu-devel] [PATCH 3/4 v3] vmware_vga: Return a value for FB_SIZE before the device is enabled BALATON Zoltan
2012-10-06 18:35 ` [Qemu-devel] [PATCH 4/4 v3] vmware_vga: Allow simple drivers to work without using the fifo BALATON Zoltan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121103124120.0EE5D614@mono.eik.bme.hu \
--to=balaton@eik.bme.hu \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).