qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>,
	Anthony Liguori <aliguori@us.ibm.com>,
	qemu-devel@nongnu.org, Blue Swirl <blauwirbel@gmail.com>,
	khoa@us.ibm.com, Paolo Bonzini <pbonzini@redhat.com>,
	asias@redhat.com
Subject: Re: [Qemu-devel] [PATCH v5 04/11] dataplane: add virtqueue vring code
Date: Thu, 6 Dec 2012 13:22:29 +0200	[thread overview]
Message-ID: <20121206112229.GK10837@redhat.com> (raw)
In-Reply-To: <1354740430-22452-5-git-send-email-stefanha@redhat.com>

On Wed, Dec 05, 2012 at 09:47:03PM +0100, Stefan Hajnoczi wrote:
> The virtio-blk-data-plane cannot access memory using the usual QEMU
> functions since it executes outside the global mutex and the memory APIs
> are this time are not thread-safe.
> 
> This patch introduces a virtqueue module based on the kernel's vhost
> vring code.  The trick is that we map guest memory ahead of time and
> access it cheaply outside the global mutex.

Question: can virtio.c be reworked to use vring.c instead?
The cost of keeping an extra memory listener around seems negligeable.
The only issue I see is around dirty tracking for used ring writes.
Maybe we could add a callback for this?

> 
> Once the hardware emulation code can execute outside the global mutex it
> will be possible to drop this code.
> 
> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
> ---
>  hw/Makefile.objs           |   2 +-
>  hw/dataplane/Makefile.objs |   2 +-
>  hw/dataplane/vring.c       | 361 +++++++++++++++++++++++++++++++++++++++++++++
>  hw/dataplane/vring.h       |  63 ++++++++
>  trace-events               |   3 +
>  5 files changed, 429 insertions(+), 2 deletions(-)
>  create mode 100644 hw/dataplane/vring.c
>  create mode 100644 hw/dataplane/vring.h
> 
> diff --git a/hw/Makefile.objs b/hw/Makefile.objs
> index d581d8d..cec84bc 100644
> --- a/hw/Makefile.objs
> +++ b/hw/Makefile.objs
> @@ -1,4 +1,4 @@
> -common-obj-y = usb/ ide/
> +common-obj-y = usb/ ide/ dataplane/
>  common-obj-y += loader.o
>  common-obj-$(CONFIG_VIRTIO) += virtio-console.o
>  common-obj-$(CONFIG_VIRTIO) += virtio-rng.o
> diff --git a/hw/dataplane/Makefile.objs b/hw/dataplane/Makefile.objs
> index 8c8dea1..34e6d57 100644
> --- a/hw/dataplane/Makefile.objs
> +++ b/hw/dataplane/Makefile.objs
> @@ -1,3 +1,3 @@
>  ifeq ($(CONFIG_VIRTIO), y)
> -common-obj-$(CONFIG_VIRTIO_BLK_DATA_PLANE) += hostmem.o
> +common-obj-$(CONFIG_VIRTIO_BLK_DATA_PLANE) += hostmem.o vring.o
>  endif
> diff --git a/hw/dataplane/vring.c b/hw/dataplane/vring.c
> new file mode 100644
> index 0000000..8321c70
> --- /dev/null
> +++ b/hw/dataplane/vring.c
> @@ -0,0 +1,361 @@
> +/* Copyright 2012 Red Hat, Inc.
> + * Copyright IBM, Corp. 2012
> + *
> + * Based on Linux 2.6.39 vhost code:
> + * Copyright (C) 2009 Red Hat, Inc.
> + * Copyright (C) 2006 Rusty Russell IBM Corporation
> + *
> + * Author: Michael S. Tsirkin <mst@redhat.com>
> + *         Stefan Hajnoczi <stefanha@redhat.com>
> + *
> + * Inspiration, some code, and most witty comments come from
> + * Documentation/virtual/lguest/lguest.c, by Rusty Russell
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2.
> + */
> +
> +#include "trace.h"
> +#include "hw/dataplane/vring.h"
> +
> +/* Map the guest's vring to host memory */
> +bool vring_setup(Vring *vring, VirtIODevice *vdev, int n)
> +{
> +    hwaddr vring_addr = virtio_queue_get_ring_addr(vdev, n);
> +    hwaddr vring_size = virtio_queue_get_ring_size(vdev, n);
> +    void *vring_ptr;
> +
> +    vring->broken = false;
> +
> +    hostmem_init(&vring->hostmem);
> +    vring_ptr = hostmem_lookup(&vring->hostmem, vring_addr, vring_size, true);
> +    if (!vring_ptr) {
> +        error_report("Failed to map vring "
> +                     "addr %#" HWADDR_PRIx " size %" HWADDR_PRIu,
> +                     vring_addr, vring_size);
> +        vring->broken = true;
> +        return false;
> +    }
> +
> +    vring_init(&vring->vr, virtio_queue_get_num(vdev, n), vring_ptr, 4096);
> +
> +    vring->last_avail_idx = 0;
> +    vring->last_used_idx = 0;
> +    vring->signalled_used = 0;
> +    vring->signalled_used_valid = false;
> +
> +    trace_vring_setup(virtio_queue_get_ring_addr(vdev, n),
> +                      vring->vr.desc, vring->vr.avail, vring->vr.used);
> +    return true;
> +}
> +
> +void vring_teardown(Vring *vring)
> +{
> +    hostmem_finalize(&vring->hostmem);
> +}
> +
> +/* Disable guest->host notifies */
> +void vring_disable_notification(VirtIODevice *vdev, Vring *vring)
> +{
> +    if (!(vdev->guest_features & (1 << VIRTIO_RING_F_EVENT_IDX))) {
> +        vring->vr.used->flags |= VRING_USED_F_NO_NOTIFY;
> +    }
> +}
> +
> +/* Enable guest->host notifies
> + *
> + * Return true if the vring is empty, false if there are more requests.
> + */
> +bool vring_enable_notification(VirtIODevice *vdev, Vring *vring)
> +{
> +    if (vdev->guest_features & (1 << VIRTIO_RING_F_EVENT_IDX)) {
> +        vring_avail_event(&vring->vr) = vring->vr.avail->idx;
> +    } else {
> +        vring->vr.used->flags &= ~VRING_USED_F_NO_NOTIFY;
> +    }
> +    smp_mb(); /* ensure update is seen before reading avail_idx */
> +    return !vring_more_avail(vring);
> +}
> +
> +/* This is stolen from linux/drivers/vhost/vhost.c:vhost_notify() */
> +bool vring_should_notify(VirtIODevice *vdev, Vring *vring)
> +{
> +    uint16_t old, new;
> +    bool v;
> +    /* Flush out used index updates. This is paired
> +     * with the barrier that the Guest executes when enabling
> +     * interrupts. */
> +    smp_mb();
> +
> +    if ((vdev->guest_features & VIRTIO_F_NOTIFY_ON_EMPTY) &&
> +        unlikely(vring->vr.avail->idx == vring->last_avail_idx)) {
> +        return true;
> +    }
> +
> +    if (!(vdev->guest_features & VIRTIO_RING_F_EVENT_IDX)) {
> +        return !(vring->vr.avail->flags & VRING_AVAIL_F_NO_INTERRUPT);
> +    }
> +    old = vring->signalled_used;
> +    v = vring->signalled_used_valid;
> +    new = vring->signalled_used = vring->last_used_idx;
> +    vring->signalled_used_valid = true;
> +
> +    if (unlikely(!v)) {
> +        return true;
> +    }
> +
> +    return vring_need_event(vring_used_event(&vring->vr), new, old);
> +}
> +
> +/* This is stolen from linux/drivers/vhost/vhost.c. */
> +static int get_indirect(Vring *vring,
> +                        struct iovec iov[], struct iovec *iov_end,
> +                        unsigned int *out_num, unsigned int *in_num,
> +                        struct vring_desc *indirect)
> +{
> +    struct vring_desc desc;
> +    unsigned int i = 0, count, found = 0;
> +
> +    /* Sanity check */
> +    if (unlikely(indirect->len % sizeof(desc))) {
> +        error_report("Invalid length in indirect descriptor: "
> +                     "len %#x not multiple of %#zx",
> +                     indirect->len, sizeof(desc));
> +        vring->broken = true;
> +        return -EFAULT;
> +    }
> +
> +    count = indirect->len / sizeof(desc);
> +    /* Buffers are chained via a 16 bit next field, so
> +     * we can have at most 2^16 of these. */
> +    if (unlikely(count > USHRT_MAX + 1)) {
> +        error_report("Indirect buffer length too big: %d", indirect->len);
> +        vring->broken = true;
> +        return -EFAULT;
> +    }
> +
> +    do {
> +        struct vring_desc *desc_ptr;
> +
> +        /* Translate indirect descriptor */
> +        desc_ptr = hostmem_lookup(&vring->hostmem,
> +                                  indirect->addr + found * sizeof(desc),
> +                                  sizeof(desc), false);
> +        if (!desc_ptr) {
> +            error_report("Failed to map indirect descriptor "
> +                         "addr %#" PRIx64 " len %zu",
> +                         (uint64_t)indirect->addr + found * sizeof(desc),
> +                         sizeof(desc));
> +            vring->broken = true;
> +            return -EFAULT;
> +        }
> +        desc = *desc_ptr;
> +
> +        /* Ensure descriptor has been loaded before accessing fields */
> +        barrier(); /* read_barrier_depends(); */
> +
> +        if (unlikely(++found > count)) {
> +            error_report("Loop detected: last one at %u "
> +                         "indirect size %u", i, count);
> +            vring->broken = true;
> +            return -EFAULT;
> +        }
> +
> +        if (unlikely(desc.flags & VRING_DESC_F_INDIRECT)) {
> +            error_report("Nested indirect descriptor");
> +            vring->broken = true;
> +            return -EFAULT;
> +        }
> +
> +        /* Stop for now if there are not enough iovecs available. */
> +        if (iov >= iov_end) {
> +            return -ENOBUFS;
> +        }
> +
> +        iov->iov_base = hostmem_lookup(&vring->hostmem, desc.addr, desc.len,
> +                                       desc.flags & VRING_DESC_F_WRITE);
> +        if (!iov->iov_base) {
> +            error_report("Failed to map indirect descriptor"
> +                         "addr %#" PRIx64 " len %u",
> +                         (uint64_t)desc.addr, desc.len);
> +            vring->broken = true;
> +            return -EFAULT;
> +        }
> +        iov->iov_len = desc.len;
> +        iov++;
> +
> +        /* If this is an input descriptor, increment that count. */
> +        if (desc.flags & VRING_DESC_F_WRITE) {
> +            *in_num += 1;
> +        } else {
> +            /* If it's an output descriptor, they're all supposed
> +             * to come before any input descriptors. */
> +            if (unlikely(*in_num)) {
> +                error_report("Indirect descriptor "
> +                             "has out after in: idx %u", i);
> +                vring->broken = true;
> +                return -EFAULT;
> +            }
> +            *out_num += 1;
> +        }
> +        i = desc.next;
> +    } while (desc.flags & VRING_DESC_F_NEXT);
> +    return 0;
> +}
> +
> +/* This looks in the virtqueue and for the first available buffer, and converts
> + * it to an iovec for convenient access.  Since descriptors consist of some
> + * number of output then some number of input descriptors, it's actually two
> + * iovecs, but we pack them into one and note how many of each there were.
> + *
> + * This function returns the descriptor number found, or vq->num (which is
> + * never a valid descriptor number) if none was found.  A negative code is
> + * returned on error.
> + *
> + * Stolen from linux/drivers/vhost/vhost.c.
> + */
> +int vring_pop(VirtIODevice *vdev, Vring *vring,
> +              struct iovec iov[], struct iovec *iov_end,
> +              unsigned int *out_num, unsigned int *in_num)
> +{
> +    struct vring_desc desc;
> +    unsigned int i, head, found = 0, num = vring->vr.num;
> +    uint16_t avail_idx, last_avail_idx;
> +
> +    /* If there was a fatal error then refuse operation */
> +    if (vring->broken) {
> +        return -EFAULT;
> +    }
> +
> +    /* Check it isn't doing very strange things with descriptor numbers. */
> +    last_avail_idx = vring->last_avail_idx;
> +    avail_idx = vring->vr.avail->idx;
> +    barrier(); /* load indices now and not again later */
> +
> +    if (unlikely((uint16_t)(avail_idx - last_avail_idx) > num)) {
> +        error_report("Guest moved used index from %u to %u",
> +                     last_avail_idx, avail_idx);
> +        vring->broken = true;
> +        return -EFAULT;
> +    }
> +
> +    /* If there's nothing new since last we looked. */
> +    if (avail_idx == last_avail_idx) {
> +        return -EAGAIN;
> +    }
> +
> +    /* Only get avail ring entries after they have been exposed by guest. */
> +    smp_rmb();
> +
> +    /* Grab the next descriptor number they're advertising, and increment
> +     * the index we've seen. */
> +    head = vring->vr.avail->ring[last_avail_idx % num];
> +
> +    /* If their number is silly, that's an error. */
> +    if (unlikely(head >= num)) {
> +        error_report("Guest says index %u > %u is available", head, num);
> +        vring->broken = true;
> +        return -EFAULT;
> +    }
> +
> +    if (vdev->guest_features & (1 << VIRTIO_RING_F_EVENT_IDX)) {
> +        vring_avail_event(&vring->vr) = vring->vr.avail->idx;
> +    }
> +
> +    /* When we start there are none of either input nor output. */
> +    *out_num = *in_num = 0;
> +
> +    i = head;
> +    do {
> +        if (unlikely(i >= num)) {
> +            error_report("Desc index is %u > %u, head = %u", i, num, head);
> +            vring->broken = true;
> +            return -EFAULT;
> +        }
> +        if (unlikely(++found > num)) {
> +            error_report("Loop detected: last one at %u vq size %u head %u",
> +                         i, num, head);
> +            vring->broken = true;
> +            return -EFAULT;
> +        }
> +        desc = vring->vr.desc[i];
> +
> +        /* Ensure descriptor is loaded before accessing fields */
> +        barrier();
> +
> +        if (desc.flags & VRING_DESC_F_INDIRECT) {
> +            int ret = get_indirect(vring, iov, iov_end, out_num, in_num, &desc);
> +            if (ret < 0) {
> +                return ret;
> +            }
> +            continue;
> +        }
> +
> +        /* If there are not enough iovecs left, stop for now.  The caller
> +         * should check if there are more descs available once they have dealt
> +         * with the current set.
> +         */
> +        if (iov >= iov_end) {
> +            return -ENOBUFS;
> +        }
> +
> +        iov->iov_base = hostmem_lookup(&vring->hostmem, desc.addr, desc.len,
> +                                       desc.flags & VRING_DESC_F_WRITE);
> +        if (!iov->iov_base) {
> +            error_report("Failed to map vring desc addr %#" PRIx64 " len %u",
> +                         (uint64_t)desc.addr, desc.len);
> +            vring->broken = true;
> +            return -EFAULT;
> +        }
> +        iov->iov_len  = desc.len;
> +        iov++;
> +
> +        if (desc.flags & VRING_DESC_F_WRITE) {
> +            /* If this is an input descriptor,
> +             * increment that count. */
> +            *in_num += 1;
> +        } else {
> +            /* If it's an output descriptor, they're all supposed
> +             * to come before any input descriptors. */
> +            if (unlikely(*in_num)) {
> +                error_report("Descriptor has out after in: idx %d", i);
> +                vring->broken = true;
> +                return -EFAULT;
> +            }
> +            *out_num += 1;
> +        }
> +        i = desc.next;
> +    } while (desc.flags & VRING_DESC_F_NEXT);
> +
> +    /* On success, increment avail index. */
> +    vring->last_avail_idx++;
> +    return head;
> +}
> +
> +/* After we've used one of their buffers, we tell them about it.
> + *
> + * Stolen from linux/drivers/vhost/vhost.c.
> + */
> +void vring_push(Vring *vring, unsigned int head, int len)
> +{
> +    struct vring_used_elem *used;
> +    uint16_t new;
> +
> +    /* Don't touch vring if a fatal error occurred */
> +    if (vring->broken) {
> +        return;
> +    }
> +
> +    /* The virtqueue contains a ring of used buffers.  Get a pointer to the
> +     * next entry in that used ring. */
> +    used = &vring->vr.used->ring[vring->last_used_idx % vring->vr.num];
> +    used->id = head;
> +    used->len = len;
> +
> +    /* Make sure buffer is written before we update index. */
> +    smp_wmb();
> +
> +    new = vring->vr.used->idx = ++vring->last_used_idx;
> +    if (unlikely((int16_t)(new - vring->signalled_used) < (uint16_t)1)) {
> +        vring->signalled_used_valid = false;
> +    }
> +}
> diff --git a/hw/dataplane/vring.h b/hw/dataplane/vring.h
> new file mode 100644
> index 0000000..1a1164a
> --- /dev/null
> +++ b/hw/dataplane/vring.h
> @@ -0,0 +1,63 @@
> +/* Copyright 2012 Red Hat, Inc. and/or its affiliates
> + * Copyright IBM, Corp. 2012
> + *
> + * Based on Linux 2.6.39 vhost code:
> + * Copyright (C) 2009 Red Hat, Inc.
> + * Copyright (C) 2006 Rusty Russell IBM Corporation
> + *
> + * Author: Michael S. Tsirkin <mst@redhat.com>
> + *         Stefan Hajnoczi <stefanha@redhat.com>
> + *
> + * Inspiration, some code, and most witty comments come from
> + * Documentation/virtual/lguest/lguest.c, by Rusty Russell
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2.
> + */
> +
> +#ifndef VRING_H
> +#define VRING_H
> +
> +#include <linux/virtio_ring.h>
> +#include "qemu-common.h"
> +#include "qemu-barrier.h"
> +#include "hw/dataplane/hostmem.h"
> +#include "hw/virtio.h"
> +
> +typedef struct {
> +    Hostmem hostmem;                /* guest memory mapper */
> +    struct vring vr;                /* virtqueue vring mapped to host memory */
> +    uint16_t last_avail_idx;        /* last processed avail ring index */
> +    uint16_t last_used_idx;         /* last processed used ring index */
> +    uint16_t signalled_used;        /* EVENT_IDX state */
> +    bool signalled_used_valid;
> +    bool broken;                    /* was there a fatal error? */
> +} Vring;
> +
> +static inline unsigned int vring_get_num(Vring *vring)
> +{
> +    return vring->vr.num;
> +}
> +
> +/* Are there more descriptors available? */
> +static inline bool vring_more_avail(Vring *vring)
> +{
> +    return vring->vr.avail->idx != vring->last_avail_idx;
> +}
> +
> +/* Fail future vring_pop() and vring_push() calls until reset */
> +static inline void vring_set_broken(Vring *vring)
> +{
> +    vring->broken = true;
> +}
> +
> +bool vring_setup(Vring *vring, VirtIODevice *vdev, int n);
> +void vring_teardown(Vring *vring);
> +void vring_disable_notification(VirtIODevice *vdev, Vring *vring);
> +bool vring_enable_notification(VirtIODevice *vdev, Vring *vring);
> +bool vring_should_notify(VirtIODevice *vdev, Vring *vring);
> +int vring_pop(VirtIODevice *vdev, Vring *vring,
> +              struct iovec iov[], struct iovec *iov_end,
> +              unsigned int *out_num, unsigned int *in_num);
> +void vring_push(Vring *vring, unsigned int head, int len);
> +
> +#endif /* VRING_H */
> diff --git a/trace-events b/trace-events
> index 6c6cbf1..a9a791b 100644
> --- a/trace-events
> +++ b/trace-events
> @@ -98,6 +98,9 @@ virtio_blk_rw_complete(void *req, int ret) "req %p ret %d"
>  virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu"
>  virtio_blk_handle_read(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu"
>  
> +# hw/dataplane/vring.c
> +vring_setup(uint64_t physical, void *desc, void *avail, void *used) "vring physical %#"PRIx64" desc %p avail %p used %p"
> +
>  # thread-pool.c
>  thread_pool_submit(void *req, void *opaque) "req %p opaque %p"
>  thread_pool_complete(void *req, void *opaque, int ret) "req %p opaque %p ret %d"
> -- 
> 1.8.0.1

  reply	other threads:[~2012-12-06 11:19 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-05 20:46 [Qemu-devel] [PATCH v5 00/11] virtio: virtio-blk data plane Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 01/11] raw-posix: add raw_get_aio_fd() for virtio-blk-data-plane Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 02/11] configure: add CONFIG_VIRTIO_BLK_DATA_PLANE Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 03/11] dataplane: add host memory mapping code Stefan Hajnoczi
2012-12-09  4:02   ` liu ping fan
2012-12-09 10:36     ` Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 04/11] dataplane: add virtqueue vring code Stefan Hajnoczi
2012-12-06 11:22   ` Michael S. Tsirkin [this message]
2012-12-06 12:53     ` Stefan Hajnoczi
2012-12-07 14:07   ` Kevin Wolf
2012-12-07 14:46     ` Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 05/11] dataplane: add event loop Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 06/11] dataplane: add Linux AIO request queue Stefan Hajnoczi
2012-12-07 14:21   ` Kevin Wolf
2012-12-10 13:05     ` Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 07/11] iov: add iov_discard() to remove data Stefan Hajnoczi
2012-12-06 11:36   ` Michael S. Tsirkin
2012-12-06 14:07     ` Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 08/11] test-iov: add iov_discard() testcase Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 09/11] iov: add qemu_iovec_concat_iov() Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 10/11] dataplane: add virtio-blk data plane code Stefan Hajnoczi
2012-12-06  7:35   ` Paolo Bonzini
2012-12-06 14:03     ` Stefan Hajnoczi
2012-12-07  6:06     ` Stefan Hajnoczi
2012-12-07 10:51       ` Paolo Bonzini
2012-12-06 11:33   ` Michael S. Tsirkin
2012-12-07  5:43     ` Stefan Hajnoczi
2012-12-07 18:04   ` Kevin Wolf
2012-12-10 13:06     ` Stefan Hajnoczi
2012-12-05 20:47 ` [Qemu-devel] [PATCH v5 11/11] virtio-blk: add x-data-plane=on|off performance feature Stefan Hajnoczi
2012-12-06 11:38 ` [Qemu-devel] [PATCH v5 00/11] virtio: virtio-blk data plane Michael S. Tsirkin
2012-12-07  6:12   ` Stefan Hajnoczi
2012-12-07  2:43 ` Liu Yuan
2012-12-07  5:46   ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121206112229.GK10837@redhat.com \
    --to=mst@redhat.com \
    --cc=aliguori@us.ibm.com \
    --cc=asias@redhat.com \
    --cc=blauwirbel@gmail.com \
    --cc=khoa@us.ibm.com \
    --cc=kwolf@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).