From: "Michael S. Tsirkin" <mst@redhat.com>
To: Blue Swirl <blauwirbel@gmail.com>
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH 7/8] pci: rename pci_internals.h pci_bus.h
Date: Wed, 12 Dec 2012 22:59:42 +0200 [thread overview]
Message-ID: <20121212205941.GF20201@redhat.com> (raw)
In-Reply-To: <CAAu8pHvS8eF+E2U7rAnr8X493mS5BfbO7TU6wGq+X7gFm_cSOQ@mail.gmail.com>
On Wed, Dec 12, 2012 at 07:56:50PM +0000, Blue Swirl wrote:
> On Wed, Dec 12, 2012 at 1:14 PM, Michael S. Tsirkin <mst@redhat.com> wrote:
> > There are lots of external users of pci_internals.h,
> > apparently making it an internal interface only didn't
> > work out. Let's stop pretending it's an internal header.
> >
> > Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> > ---
> > hw/apb_pci.c | 2 +-
> > hw/dec_pci.c | 2 +-
> > hw/ich9.h | 2 +-
> > hw/lpc_ich9.c | 2 +-
> > hw/pci/pci.c | 2 +-
> > hw/pci/pci_bridge.c | 2 +-
> > hw/pci/pci_bus.h | 78 ++++++++++++++++++++++++++++++++++++++++++++++++++
> > hw/pci/pci_internals.h | 78 --------------------------------------------------
> > hw/pci/pcie.c | 2 +-
> > hw/pci/pcie_aer.c | 2 +-
> > hw/pci/pcie_port.h | 2 +-
> > hw/pci/shpc.c | 2 +-
> > hw/pci_bridge_dev.c | 2 +-
> > hw/spapr_pci.c | 2 +-
> > 14 files changed, 90 insertions(+), 90 deletions(-)
> > create mode 100644 hw/pci/pci_bus.h
> > delete mode 100644 hw/pci/pci_internals.h
> >
> > diff --git a/hw/apb_pci.c b/hw/apb_pci.c
> > index de594f8..fb7a07d 100644
> > --- a/hw/apb_pci.c
> > +++ b/hw/apb_pci.c
> > @@ -30,7 +30,7 @@
> > #include "pci/pci.h"
> > #include "pci/pci_host.h"
> > #include "pci/pci_bridge.h"
> > -#include "pci/pci_internals.h"
> > +#include "pci/pci_bus.h"
> > #include "apb_pci.h"
> > #include "sysemu.h"
> > #include "exec-memory.h"
> > diff --git a/hw/dec_pci.c b/hw/dec_pci.c
> > index a6a7c84..ee3f4ca 100644
> > --- a/hw/dec_pci.c
> > +++ b/hw/dec_pci.c
> > @@ -28,7 +28,7 @@
> > #include "pci/pci.h"
> > #include "pci/pci_host.h"
> > #include "pci/pci_bridge.h"
> > -#include "pci/pci_internals.h"
> > +#include "pci/pci_bus.h"
> >
> > /* debug DEC */
> > //#define DEBUG_DEC
> > diff --git a/hw/ich9.h b/hw/ich9.h
> > index 247be94..4e7442c 100644
> > --- a/hw/ich9.h
> > +++ b/hw/ich9.h
> > @@ -14,7 +14,7 @@
> > #include "acpi.h"
> > #include "acpi_ich9.h"
> > #include "pam.h"
> > -#include "pci/pci_internals.h"
> > +#include "pci/pci_bus.h"
> >
> > void ich9_lpc_set_irq(void *opaque, int irq_num, int level);
> > int ich9_lpc_map_irq(PCIDevice *pci_dev, int intx);
> > diff --git a/hw/lpc_ich9.c b/hw/lpc_ich9.c
> > index 23dee88..7bca061 100644
> > --- a/hw/lpc_ich9.c
> > +++ b/hw/lpc_ich9.c
> > @@ -42,7 +42,7 @@
> > #include "acpi.h"
> > #include "acpi_ich9.h"
> > #include "pam.h"
> > -#include "pci/pci_internals.h"
> > +#include "pci/pci_bus.h"
> > #include "exec-memory.h"
> >
> > static int ich9_lpc_sci_irq(ICH9LPCState *lpc);
> > diff --git a/hw/pci/pci.c b/hw/pci/pci.c
> > index 6023ded..c1a4b32 100644
> > --- a/hw/pci/pci.c
> > +++ b/hw/pci/pci.c
> > @@ -24,7 +24,7 @@
> > #include <hw/hw.h>
> > #include "pci.h"
> > #include "pci_bridge.h"
> > -#include "pci_internals.h"
> > +#include "pci_bus.h"
> > #include <monitor.h>
> > #include <net.h>
> > #include <sysemu.h>
> > diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
> > index 4680501..0fb7577 100644
> > --- a/hw/pci/pci_bridge.c
> > +++ b/hw/pci/pci_bridge.c
> > @@ -30,7 +30,7 @@
> > */
> >
> > #include "pci_bridge.h"
> > -#include "pci_internals.h"
> > +#include "pci_bus.h"
> > #include "range.h"
> >
> > /* PCI bridge subsystem vendor ID helper functions */
> > diff --git a/hw/pci/pci_bus.h b/hw/pci/pci_bus.h
> > new file mode 100644
> > index 0000000..21d0ce6
> > --- /dev/null
> > +++ b/hw/pci/pci_bus.h
> > @@ -0,0 +1,78 @@
> > +#ifndef QEMU_PCI_INTERNALS_H
> > +#define QEMU_PCI_INTERNALS_H
>
> This should become QEMU_PCI_BUS_H or something similar.
Good catch, thanks! Will fix in a separate patch though - rename
detection works better if file is moved without changes.
> > +
> > +/*
> > + * This header files is private to pci.c and pci_bridge.c
> > + * So following structures are opaque to others and shouldn't be
> > + * accessed.
> > + *
> > + * For pci-to-pci bridge needs to include this header file to embed
> > + * PCIBridge in its structure or to get sizeof(PCIBridge),
> > + * However, they shouldn't access those following members directly.
> > + * Use accessor function in pci.h, pci_bridge.h
> > + */
> > +
> > +#define TYPE_PCI_BUS "PCI"
> > +#define PCI_BUS(obj) OBJECT_CHECK(PCIBus, (obj), TYPE_PCI_BUS)
> > +
> > +struct PCIBus {
> > + BusState qbus;
> > + PCIDMAContextFunc dma_context_fn;
> > + void *dma_context_opaque;
> > + uint8_t devfn_min;
> > + pci_set_irq_fn set_irq;
> > + pci_map_irq_fn map_irq;
> > + pci_route_irq_fn route_intx_to_irq;
> > + pci_hotplug_fn hotplug;
> > + DeviceState *hotplug_qdev;
> > + void *irq_opaque;
> > + PCIDevice *devices[PCI_SLOT_MAX * PCI_FUNC_MAX];
> > + PCIDevice *parent_dev;
> > + MemoryRegion *address_space_mem;
> > + MemoryRegion *address_space_io;
> > +
> > + QLIST_HEAD(, PCIBus) child; /* this will be replaced by qdev later */
> > + QLIST_ENTRY(PCIBus) sibling;/* this will be replaced by qdev later */
> > +
> > + /* The bus IRQ state is the logical OR of the connected devices.
> > + Keep a count of the number of devices with raised IRQs. */
> > + int nirq;
> > + int *irq_count;
> > +};
> > +
> > +typedef struct PCIBridgeWindows PCIBridgeWindows;
> > +
> > +/*
> > + * Aliases for each of the address space windows that the bridge
> > + * can forward. Mapped into the bridge's parent's address space,
> > + * as subregions.
> > + */
> > +struct PCIBridgeWindows {
> > + MemoryRegion alias_pref_mem;
> > + MemoryRegion alias_mem;
> > + MemoryRegion alias_io;
> > +};
> > +
> > +struct PCIBridge {
> > + PCIDevice dev;
> > +
> > + /* private member */
> > + PCIBus sec_bus;
> > + /*
> > + * Memory regions for the bridge's address spaces. These regions are not
> > + * directly added to system_memory/system_io or its descendants.
> > + * Bridge's secondary bus points to these, so that devices
> > + * under the bridge see these regions as its address spaces.
> > + * The regions are as large as the entire address space -
> > + * they don't take into account any windows.
> > + */
> > + MemoryRegion address_space_mem;
> > + MemoryRegion address_space_io;
> > +
> > + PCIBridgeWindows *windows;
> > +
> > + pci_map_irq_fn map_irq;
> > + const char *bus_name;
> > +};
> > +
> > +#endif /* QEMU_PCI_INTERNALS_H */
> > diff --git a/hw/pci/pci_internals.h b/hw/pci/pci_internals.h
> > deleted file mode 100644
> > index 21d0ce6..0000000
> > --- a/hw/pci/pci_internals.h
> > +++ /dev/null
> > @@ -1,78 +0,0 @@
> > -#ifndef QEMU_PCI_INTERNALS_H
> > -#define QEMU_PCI_INTERNALS_H
> > -
> > -/*
> > - * This header files is private to pci.c and pci_bridge.c
> > - * So following structures are opaque to others and shouldn't be
> > - * accessed.
> > - *
> > - * For pci-to-pci bridge needs to include this header file to embed
> > - * PCIBridge in its structure or to get sizeof(PCIBridge),
> > - * However, they shouldn't access those following members directly.
> > - * Use accessor function in pci.h, pci_bridge.h
> > - */
> > -
> > -#define TYPE_PCI_BUS "PCI"
> > -#define PCI_BUS(obj) OBJECT_CHECK(PCIBus, (obj), TYPE_PCI_BUS)
> > -
> > -struct PCIBus {
> > - BusState qbus;
> > - PCIDMAContextFunc dma_context_fn;
> > - void *dma_context_opaque;
> > - uint8_t devfn_min;
> > - pci_set_irq_fn set_irq;
> > - pci_map_irq_fn map_irq;
> > - pci_route_irq_fn route_intx_to_irq;
> > - pci_hotplug_fn hotplug;
> > - DeviceState *hotplug_qdev;
> > - void *irq_opaque;
> > - PCIDevice *devices[PCI_SLOT_MAX * PCI_FUNC_MAX];
> > - PCIDevice *parent_dev;
> > - MemoryRegion *address_space_mem;
> > - MemoryRegion *address_space_io;
> > -
> > - QLIST_HEAD(, PCIBus) child; /* this will be replaced by qdev later */
> > - QLIST_ENTRY(PCIBus) sibling;/* this will be replaced by qdev later */
> > -
> > - /* The bus IRQ state is the logical OR of the connected devices.
> > - Keep a count of the number of devices with raised IRQs. */
> > - int nirq;
> > - int *irq_count;
> > -};
> > -
> > -typedef struct PCIBridgeWindows PCIBridgeWindows;
> > -
> > -/*
> > - * Aliases for each of the address space windows that the bridge
> > - * can forward. Mapped into the bridge's parent's address space,
> > - * as subregions.
> > - */
> > -struct PCIBridgeWindows {
> > - MemoryRegion alias_pref_mem;
> > - MemoryRegion alias_mem;
> > - MemoryRegion alias_io;
> > -};
> > -
> > -struct PCIBridge {
> > - PCIDevice dev;
> > -
> > - /* private member */
> > - PCIBus sec_bus;
> > - /*
> > - * Memory regions for the bridge's address spaces. These regions are not
> > - * directly added to system_memory/system_io or its descendants.
> > - * Bridge's secondary bus points to these, so that devices
> > - * under the bridge see these regions as its address spaces.
> > - * The regions are as large as the entire address space -
> > - * they don't take into account any windows.
> > - */
> > - MemoryRegion address_space_mem;
> > - MemoryRegion address_space_io;
> > -
> > - PCIBridgeWindows *windows;
> > -
> > - pci_map_irq_fn map_irq;
> > - const char *bus_name;
> > -};
> > -
> > -#endif /* QEMU_PCI_INTERNALS_H */
> > diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
> > index 7c92f19..d9c38b5 100644
> > --- a/hw/pci/pcie.c
> > +++ b/hw/pci/pcie.c
> > @@ -23,7 +23,7 @@
> > #include "pcie.h"
> > #include "msix.h"
> > #include "msi.h"
> > -#include "pci_internals.h"
> > +#include "pci_bus.h"
> > #include "pcie_regs.h"
> > #include "range.h"
> >
> > diff --git a/hw/pci/pcie_aer.c b/hw/pci/pcie_aer.c
> > index b04c164..3c3185c 100644
> > --- a/hw/pci/pcie_aer.c
> > +++ b/hw/pci/pcie_aer.c
> > @@ -25,7 +25,7 @@
> > #include "pcie.h"
> > #include "msix.h"
> > #include "msi.h"
> > -#include "pci_internals.h"
> > +#include "pci_bus.h"
> > #include "pcie_regs.h"
> >
> > //#define DEBUG_PCIE
> > diff --git a/hw/pci/pcie_port.h b/hw/pci/pcie_port.h
> > index 3709583..36b2241 100644
> > --- a/hw/pci/pcie_port.h
> > +++ b/hw/pci/pcie_port.h
> > @@ -22,7 +22,7 @@
> > #define QEMU_PCIE_PORT_H
> >
> > #include "pci_bridge.h"
> > -#include "pci_internals.h"
> > +#include "pci_bus.h"
> >
> > struct PCIEPort {
> > PCIBridge br;
> > diff --git a/hw/pci/shpc.c b/hw/pci/shpc.c
> > index 4597bbd..9297af0 100644
> > --- a/hw/pci/shpc.c
> > +++ b/hw/pci/shpc.c
> > @@ -4,7 +4,7 @@
> > #include "range.h"
> > #include "shpc.h"
> > #include "pci.h"
> > -#include "pci_internals.h"
> > +#include "pci_bus.h"
> > #include "msi.h"
> >
> > /* TODO: model power only and disabled slot states. */
> > diff --git a/hw/pci_bridge_dev.c b/hw/pci_bridge_dev.c
> > index 5c9fc50..dbb4b3b 100644
> > --- a/hw/pci_bridge_dev.c
> > +++ b/hw/pci_bridge_dev.c
> > @@ -25,7 +25,7 @@
> > #include "pci/shpc.h"
> > #include "pci/slotid_cap.h"
> > #include "memory.h"
> > -#include "pci/pci_internals.h"
> > +#include "pci/pci_bus.h"
> >
> > #define REDHAT_PCI_VENDOR_ID 0x1b36
> > #define PCI_BRIDGE_DEV_VENDOR_ID REDHAT_PCI_VENDOR_ID
> > diff --git a/hw/spapr_pci.c b/hw/spapr_pci.c
> > index e123866..6b05e5b 100644
> > --- a/hw/spapr_pci.c
> > +++ b/hw/spapr_pci.c
> > @@ -33,7 +33,7 @@
> > #include <libfdt.h>
> > #include "trace.h"
> >
> > -#include "hw/pci/pci_internals.h"
> > +#include "hw/pci/pci_bus.h"
> >
> > /* Copied from the kernel arch/powerpc/platforms/pseries/msi.c */
> > #define RTAS_QUERY_FN 0
> > --
> > MST
> >
> >
next prev parent reply other threads:[~2012-12-12 20:56 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-12 13:13 [Qemu-devel] [PATCH 0/8] pci core reorg Michael S. Tsirkin
2012-12-12 13:14 ` [Qemu-devel] [PATCH 1/8] pci: prepare makefiles for pci code reorganization Michael S. Tsirkin
2012-12-12 13:14 ` [Qemu-devel] [PATCH 2/8] MAINTAINERS: add hw/pci/ to list of PCI files Michael S. Tsirkin
2012-12-12 13:14 ` [Qemu-devel] [PATCH 3/8] pci: move pci core code to hw/pci Michael S. Tsirkin
2012-12-12 19:53 ` Blue Swirl
2012-12-12 20:56 ` Michael S. Tsirkin
2012-12-12 13:14 ` [Qemu-devel] [PATCH 4/8] pci: update all users to look in pci/ Michael S. Tsirkin
2012-12-12 13:14 ` [Qemu-devel] [PATCH 6/8] Revert "pci: prepare makefiles for pci code reorganization" Michael S. Tsirkin
2012-12-12 13:14 ` [Qemu-devel] [PATCH 5/8] pci: make external dependencies explicit Michael S. Tsirkin
2012-12-12 19:49 ` Blue Swirl
2012-12-12 20:53 ` Michael S. Tsirkin
2012-12-12 13:14 ` [Qemu-devel] [PATCH 7/8] pci: rename pci_internals.h pci_bus.h Michael S. Tsirkin
2012-12-12 19:56 ` Blue Swirl
2012-12-12 20:59 ` Michael S. Tsirkin [this message]
2012-12-12 13:14 ` [Qemu-devel] [PATCH 8/8] pci_bus: update comment Michael S. Tsirkin
2012-12-12 13:51 ` [Qemu-devel] [PATCH 0/8] pci core reorg Anthony Liguori
2012-12-12 13:59 ` Paolo Bonzini
2012-12-12 20:00 ` Blue Swirl
2012-12-12 20:58 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121212205941.GF20201@redhat.com \
--to=mst@redhat.com \
--cc=blauwirbel@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).