* [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm [not found] <CAMgy+8MmP+mkN0Ox6qvcGuWuJK6Dq5qSuEbawQRvsodxm41roA@mail.gmail.com> @ 2013-01-01 1:17 ` Mark Blakeney 2013-01-01 10:08 ` Gleb Natapov 0 siblings, 1 reply; 10+ messages in thread From: Mark Blakeney @ 2013-01-01 1:17 UTC (permalink / raw) To: qemu-devel [-- Attachment #1: Type: text/plain, Size: 887 bytes --] Hi, I am inexperienced using QEMU and hoping somebody here can help me. Some time ago I cloned a disk image of an old Solaris legacy system and was able to successfully boot and use it within QEMU. Recently I upgraded my host from i386 Ubuntu 12.04 to a new box running x86_64 Ubuntu 12.10. Now I find that the same qemu command line results in that guest failing to boot with a "no active boot partition" error message. The command I have been using is: qemu-system-i386 \ -machine pc,accel=kvm \ -m 256M \ -vga std \ -net nic,vlan=1,model=pcnet \ -net user,vlan=1,hostfwd=::8050-$GUEST:22 \ -hda "$DISK" I find that if I change to "accel=tcg" in above command (or add -no-kvm) then the guest will boot ok but I find my host works much harder & slower than when I use kvm. Is there a qemu option so I can use kvm but get around this guest boot issue? Thanks, -- Mark. [-- Attachment #2: Type: text/html, Size: 1251 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-01 1:17 ` [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm Mark Blakeney @ 2013-01-01 10:08 ` Gleb Natapov 2013-01-01 11:17 ` Mark Blakeney 0 siblings, 1 reply; 10+ messages in thread From: Gleb Natapov @ 2013-01-01 10:08 UTC (permalink / raw) To: Mark Blakeney; +Cc: qemu-devel On Tue, Jan 01, 2013 at 11:17:52AM +1000, Mark Blakeney wrote: > Hi, I am inexperienced using QEMU and hoping somebody here can help me. > > Some time ago I cloned a disk image of an old Solaris legacy system and was > able to successfully boot and use it within QEMU. Recently I upgraded my > host from i386 Ubuntu 12.04 to a new box running x86_64 Ubuntu 12.10. Now I > find that the same qemu command line results in that guest failing to boot > with a "no active boot partition" error message. > > The command I have been using is: > > qemu-system-i386 \ > -machine pc,accel=kvm \ > -m 256M \ > -vga std \ > -net nic,vlan=1,model=pcnet \ > -net user,vlan=1,hostfwd=::8050-$GUEST:22 \ > -hda "$DISK" > > I find that if I change to "accel=tcg" in above command (or add -no-kvm) > then the guest will boot ok but I find my host works much harder & slower > than when I use kvm. Is there a qemu option so I can use kvm but get around > this guest boot issue? > What is your kernel version? -- Gleb. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-01 10:08 ` Gleb Natapov @ 2013-01-01 11:17 ` Mark Blakeney 2013-01-01 11:30 ` Gleb Natapov 0 siblings, 1 reply; 10+ messages in thread From: Mark Blakeney @ 2013-01-01 11:17 UTC (permalink / raw) To: Gleb Natapov; +Cc: qemu-devel Linux pc 3.7.0-7-generic #15-Ubuntu SMP Sat Dec 15 16:34:25 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux (Ubuntu version 3.7.0.7.11) I am using xorg edgers on Ubuntu 12.10 because I have a brand new box and have been seeing graphics issues so trying latest drivers. However, I am fairly sure I tried booting that qemu image on the stock Ubuntu kernel (3.5.0.21.27) with the same result. -- Mark Blakeney. On Tue, Jan 1, 2013 at 8:08 PM, Gleb Natapov <gleb@redhat.com> wrote: > On Tue, Jan 01, 2013 at 11:17:52AM +1000, Mark Blakeney wrote: >> Hi, I am inexperienced using QEMU and hoping somebody here can help me. >> >> Some time ago I cloned a disk image of an old Solaris legacy system and was >> able to successfully boot and use it within QEMU. Recently I upgraded my >> host from i386 Ubuntu 12.04 to a new box running x86_64 Ubuntu 12.10. Now I >> find that the same qemu command line results in that guest failing to boot >> with a "no active boot partition" error message. >> >> The command I have been using is: >> >> qemu-system-i386 \ >> -machine pc,accel=kvm \ >> -m 256M \ >> -vga std \ >> -net nic,vlan=1,model=pcnet \ >> -net user,vlan=1,hostfwd=::8050-$GUEST:22 \ >> -hda "$DISK" >> >> I find that if I change to "accel=tcg" in above command (or add -no-kvm) >> then the guest will boot ok but I find my host works much harder & slower >> than when I use kvm. Is there a qemu option so I can use kvm but get around >> this guest boot issue? >> > What is your kernel version? > > -- > Gleb. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-01 11:17 ` Mark Blakeney @ 2013-01-01 11:30 ` Gleb Natapov 2013-01-01 12:42 ` Mark Blakeney 0 siblings, 1 reply; 10+ messages in thread From: Gleb Natapov @ 2013-01-01 11:30 UTC (permalink / raw) To: Mark Blakeney; +Cc: qemu-devel On Tue, Jan 01, 2013 at 09:17:52PM +1000, Mark Blakeney wrote: > Linux pc 3.7.0-7-generic #15-Ubuntu SMP Sat Dec 15 16:34:25 UTC 2012 > x86_64 x86_64 x86_64 GNU/Linux (Ubuntu version 3.7.0.7.11) > > I am using xorg edgers on Ubuntu 12.10 because I have a brand new box > and have been seeing graphics issues so trying latest drivers. > However, I am fairly sure I tried booting that qemu image on the stock > Ubuntu kernel (3.5.0.21.27) with the same result. > So is there kernel that works, or kvm never worked for this image? > -- > Mark Blakeney. > > > On Tue, Jan 1, 2013 at 8:08 PM, Gleb Natapov <gleb@redhat.com> wrote: > > On Tue, Jan 01, 2013 at 11:17:52AM +1000, Mark Blakeney wrote: > >> Hi, I am inexperienced using QEMU and hoping somebody here can help me. > >> > >> Some time ago I cloned a disk image of an old Solaris legacy system and was > >> able to successfully boot and use it within QEMU. Recently I upgraded my > >> host from i386 Ubuntu 12.04 to a new box running x86_64 Ubuntu 12.10. Now I > >> find that the same qemu command line results in that guest failing to boot > >> with a "no active boot partition" error message. > >> > >> The command I have been using is: > >> > >> qemu-system-i386 \ > >> -machine pc,accel=kvm \ > >> -m 256M \ > >> -vga std \ > >> -net nic,vlan=1,model=pcnet \ > >> -net user,vlan=1,hostfwd=::8050-$GUEST:22 \ > >> -hda "$DISK" > >> > >> I find that if I change to "accel=tcg" in above command (or add -no-kvm) > >> then the guest will boot ok but I find my host works much harder & slower > >> than when I use kvm. Is there a qemu option so I can use kvm but get around > >> this guest boot issue? > >> > > What is your kernel version? > > > > -- > > Gleb. -- Gleb. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-01 11:30 ` Gleb Natapov @ 2013-01-01 12:42 ` Mark Blakeney 2013-01-01 14:17 ` Gleb Natapov 0 siblings, 1 reply; 10+ messages in thread From: Mark Blakeney @ 2013-01-01 12:42 UTC (permalink / raw) To: Gleb Natapov; +Cc: qemu-devel As per first post, kvm worked for me on Ubuntu 12.04 32 bit with whatever 3.* kernel that was. I have upgraded to a new box with newly installed Ubuntu 12.10 64 bit and now kvm does not work. Same qemu image. I suspect the architecture change from 32 to 64 bit is the issue here but I guess you are suggesting it may be related to the kernel upgrade? -- Mark Blakeney. On Tue, Jan 1, 2013 at 9:30 PM, Gleb Natapov <gleb@redhat.com> wrote: > On Tue, Jan 01, 2013 at 09:17:52PM +1000, Mark Blakeney wrote: >> Linux pc 3.7.0-7-generic #15-Ubuntu SMP Sat Dec 15 16:34:25 UTC 2012 >> x86_64 x86_64 x86_64 GNU/Linux (Ubuntu version 3.7.0.7.11) >> >> I am using xorg edgers on Ubuntu 12.10 because I have a brand new box >> and have been seeing graphics issues so trying latest drivers. >> However, I am fairly sure I tried booting that qemu image on the stock >> Ubuntu kernel (3.5.0.21.27) with the same result. >> > So is there kernel that works, or kvm never worked for this image? > >> -- >> Mark Blakeney. >> >> >> On Tue, Jan 1, 2013 at 8:08 PM, Gleb Natapov <gleb@redhat.com> wrote: >> > On Tue, Jan 01, 2013 at 11:17:52AM +1000, Mark Blakeney wrote: >> >> Hi, I am inexperienced using QEMU and hoping somebody here can help me. >> >> >> >> Some time ago I cloned a disk image of an old Solaris legacy system and was >> >> able to successfully boot and use it within QEMU. Recently I upgraded my >> >> host from i386 Ubuntu 12.04 to a new box running x86_64 Ubuntu 12.10. Now I >> >> find that the same qemu command line results in that guest failing to boot >> >> with a "no active boot partition" error message. >> >> >> >> The command I have been using is: >> >> >> >> qemu-system-i386 \ >> >> -machine pc,accel=kvm \ >> >> -m 256M \ >> >> -vga std \ >> >> -net nic,vlan=1,model=pcnet \ >> >> -net user,vlan=1,hostfwd=::8050-$GUEST:22 \ >> >> -hda "$DISK" >> >> >> >> I find that if I change to "accel=tcg" in above command (or add -no-kvm) >> >> then the guest will boot ok but I find my host works much harder & slower >> >> than when I use kvm. Is there a qemu option so I can use kvm but get around >> >> this guest boot issue? >> >> >> > What is your kernel version? >> > >> > -- >> > Gleb. > > -- > Gleb. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-01 12:42 ` Mark Blakeney @ 2013-01-01 14:17 ` Gleb Natapov 2013-01-02 7:35 ` Mark Blakeney 0 siblings, 1 reply; 10+ messages in thread From: Gleb Natapov @ 2013-01-01 14:17 UTC (permalink / raw) To: Mark Blakeney; +Cc: qemu-devel On Tue, Jan 01, 2013 at 10:42:26PM +1000, Mark Blakeney wrote: > As per first post, kvm worked for me on Ubuntu 12.04 32 bit with > whatever 3.* kernel that was. I have upgraded to a new box with newly > installed Ubuntu 12.10 64 bit and now kvm does not work. Same qemu > image. I suspect the architecture change from 32 to 64 bit is the > issue here but I guess you are suggesting it may be related to the > kernel upgrade? > Don't know yet. What was the kernel version on 12.04 32 bit? You said that kernel 3.5 64bit does not work for you either. Can you try older kernel? > -- > Mark Blakeney. > > > On Tue, Jan 1, 2013 at 9:30 PM, Gleb Natapov <gleb@redhat.com> wrote: > > On Tue, Jan 01, 2013 at 09:17:52PM +1000, Mark Blakeney wrote: > >> Linux pc 3.7.0-7-generic #15-Ubuntu SMP Sat Dec 15 16:34:25 UTC 2012 > >> x86_64 x86_64 x86_64 GNU/Linux (Ubuntu version 3.7.0.7.11) > >> > >> I am using xorg edgers on Ubuntu 12.10 because I have a brand new box > >> and have been seeing graphics issues so trying latest drivers. > >> However, I am fairly sure I tried booting that qemu image on the stock > >> Ubuntu kernel (3.5.0.21.27) with the same result. > >> > > So is there kernel that works, or kvm never worked for this image? > > > >> -- > >> Mark Blakeney. > >> > >> > >> On Tue, Jan 1, 2013 at 8:08 PM, Gleb Natapov <gleb@redhat.com> wrote: > >> > On Tue, Jan 01, 2013 at 11:17:52AM +1000, Mark Blakeney wrote: > >> >> Hi, I am inexperienced using QEMU and hoping somebody here can help me. > >> >> > >> >> Some time ago I cloned a disk image of an old Solaris legacy system and was > >> >> able to successfully boot and use it within QEMU. Recently I upgraded my > >> >> host from i386 Ubuntu 12.04 to a new box running x86_64 Ubuntu 12.10. Now I > >> >> find that the same qemu command line results in that guest failing to boot > >> >> with a "no active boot partition" error message. > >> >> > >> >> The command I have been using is: > >> >> > >> >> qemu-system-i386 \ > >> >> -machine pc,accel=kvm \ > >> >> -m 256M \ > >> >> -vga std \ > >> >> -net nic,vlan=1,model=pcnet \ > >> >> -net user,vlan=1,hostfwd=::8050-$GUEST:22 \ > >> >> -hda "$DISK" > >> >> > >> >> I find that if I change to "accel=tcg" in above command (or add -no-kvm) > >> >> then the guest will boot ok but I find my host works much harder & slower > >> >> than when I use kvm. Is there a qemu option so I can use kvm but get around > >> >> this guest boot issue? > >> >> > >> > What is your kernel version? > >> > > >> > -- > >> > Gleb. > > > > -- > > Gleb. -- Gleb. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-01 14:17 ` Gleb Natapov @ 2013-01-02 7:35 ` Mark Blakeney 2013-01-02 9:40 ` Gleb Natapov 0 siblings, 1 reply; 10+ messages in thread From: Mark Blakeney @ 2013-01-02 7:35 UTC (permalink / raw) To: Gleb Natapov; +Cc: qemu-devel Ubuntu 12.04 (precise) kernel is 3.2.0.35.40. Too hard to downgrade kermel. I should mention that I installed current qemu 1.3.0 from source but made no difference. I also had installed 1.3.0 from source on my older ubuntu system (trying to fix a problem which I later solved another way) and it worked fine. So I don't think this is an issue with older/later versions of qemu. Another very odd thing is that about one in 40 attempts the image will boot in kvm. Completely random though it seems. Always boots if I add "-no-kvm". -- Mark Blakeney. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-02 7:35 ` Mark Blakeney @ 2013-01-02 9:40 ` Gleb Natapov 2013-01-02 12:26 ` Mark Blakeney 0 siblings, 1 reply; 10+ messages in thread From: Gleb Natapov @ 2013-01-02 9:40 UTC (permalink / raw) To: Mark Blakeney; +Cc: qemu-devel On Wed, Jan 02, 2013 at 05:35:44PM +1000, Mark Blakeney wrote: > Ubuntu 12.04 (precise) kernel is 3.2.0.35.40. Too hard to downgrade kermel. > So, as far as I understand, you moved from 3.2.0 32bit kernel to 3.5.0/3.7.0 64bit kernel and things stopped working. It is hard to conclude that this is 32 vs 64 bit problem from that. Can you compile 3.2 64bit kernel and try it? > I should mention that I installed current qemu 1.3.0 from source but > made no difference. I also had installed 1.3.0 from source on my older > ubuntu system (trying to fix a problem which I later solved another > way) and it worked fine. So I don't think this is an issue with > older/later versions of qemu. > > Another very odd thing is that about one in 40 attempts the image will > boot in kvm. Completely random though it seems. Always boots if I add > "-no-kvm". > > -- > Mark Blakeney. -- Gleb. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-02 9:40 ` Gleb Natapov @ 2013-01-02 12:26 ` Mark Blakeney 2013-01-02 12:58 ` Gleb Natapov 0 siblings, 1 reply; 10+ messages in thread From: Mark Blakeney @ 2013-01-02 12:26 UTC (permalink / raw) To: Gleb Natapov; +Cc: qemu-devel FYI, I just discovered that I can make my Solaris guest boot every time in kvm by specifying an interactive boot at the boot prompt and then just hand stepping through the default prompts. Presumably there is a timing issue in the guest boot sequence which kvm is exposing when running natively on my new current gen cpu + ssd box. It seems slowing down the boot artificially by hand stepping, or by running with -no-kvm, or by running on my older hardware + hdd, avoids this. So sorry but this seems likely a bug in the old Solaris 2.5.1 guest OS when running on modern fast hardware(?). Now I know about this interactive boot option I can just use it to boot each time. There are only 3 quick prompts so it is not really a bother. The guest runs fine in kvm after booting so this speed related bug is only during the initial boot sequence. Thanks for your help. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm 2013-01-02 12:26 ` Mark Blakeney @ 2013-01-02 12:58 ` Gleb Natapov 0 siblings, 0 replies; 10+ messages in thread From: Gleb Natapov @ 2013-01-02 12:58 UTC (permalink / raw) To: Mark Blakeney; +Cc: qemu-devel On Wed, Jan 02, 2013 at 10:26:55PM +1000, Mark Blakeney wrote: > FYI, I just discovered that I can make my Solaris guest boot every > time in kvm by specifying an interactive boot at the boot prompt and > then just hand stepping through the default prompts. Presumably there > is a timing issue in the guest boot sequence which kvm is exposing > when running natively on my new current gen cpu + ssd box. It seems > slowing down the boot artificially by hand stepping, or by running > with -no-kvm, or by running on my older hardware + hdd, avoids this. > Interesting. Thanks for the update and report back if you will find something new please. > So sorry but this seems likely a bug in the old Solaris 2.5.1 guest OS > when running on modern fast hardware(?). Now I know about this > interactive boot option I can just use it to boot each time. There are > only 3 quick prompts so it is not really a bother. > > The guest runs fine in kvm after booting so this speed related bug is > only during the initial boot sequence. > > Thanks for your help. -- Gleb. ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2013-01-02 12:58 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CAMgy+8MmP+mkN0Ox6qvcGuWuJK6Dq5qSuEbawQRvsodxm41roA@mail.gmail.com>
2013-01-01 1:17 ` [Qemu-devel] Fwd: Problem booting 32 bit guest on 64 bit host using kvm Mark Blakeney
2013-01-01 10:08 ` Gleb Natapov
2013-01-01 11:17 ` Mark Blakeney
2013-01-01 11:30 ` Gleb Natapov
2013-01-01 12:42 ` Mark Blakeney
2013-01-01 14:17 ` Gleb Natapov
2013-01-02 7:35 ` Mark Blakeney
2013-01-02 9:40 ` Gleb Natapov
2013-01-02 12:26 ` Mark Blakeney
2013-01-02 12:58 ` Gleb Natapov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).