From: Aurelien Jarno <aurelien@aurel32.net>
To: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v3 02/20] tcg-arm: Handle negated constant arguments to and/sub
Date: Fri, 29 Mar 2013 17:53:55 +0100 [thread overview]
Message-ID: <20130329165355.GI5000@ohm.aurel32.net> (raw)
In-Reply-To: <1364484781-15561-3-git-send-email-rth@twiddle.net>
On Thu, Mar 28, 2013 at 08:32:43AM -0700, Richard Henderson wrote:
> This greatly improves code generation for addition of small
> negative constants.
>
> Signed-off-by: Richard Henderson <rth@twiddle.net>
> ---
> tcg/arm/tcg-target.c | 41 +++++++++++++++++++++++++++++++++++------
> 1 file changed, 35 insertions(+), 6 deletions(-)
>
> diff --git a/tcg/arm/tcg-target.c b/tcg/arm/tcg-target.c
> index 9972792..f470caa 100644
> --- a/tcg/arm/tcg-target.c
> +++ b/tcg/arm/tcg-target.c
> @@ -147,6 +147,7 @@ static void patch_reloc(uint8_t *code_ptr, int type,
>
> #define TCG_CT_CONST_ARM 0x100
> #define TCG_CT_CONST_INV 0x200
> +#define TCG_CT_CONST_NEG 0x400
>
> /* parse target specific constraints */
> static int target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
> @@ -161,6 +162,9 @@ static int target_parse_constraint(TCGArgConstraint *ct, const char **pct_str)
> case 'K':
> ct->ct |= TCG_CT_CONST_INV;
> break;
> + case 'N': /* The gcc constraint letter is L, already used here. */
> + ct->ct |= TCG_CT_CONST_NEG;
> + break;
>
> case 'r':
> ct->ct |= TCG_CT_REG;
> @@ -291,6 +295,8 @@ static inline int tcg_target_const_match(tcg_target_long val,
> return 1;
> } else if ((ct & TCG_CT_CONST_INV) && check_fit_imm(~val)) {
> return 1;
> + } else if ((ct & TCG_CT_CONST_NEG) && check_fit_imm(-val)) {
> + return 1;
> } else {
> return 0;
> }
> @@ -512,6 +518,27 @@ static void tcg_out_dat_rIK(TCGContext *s, int cond, int opc, int opinv,
> }
> }
>
> +static void tcg_out_dat_rIN(TCGContext *s, int cond, int opc, int opneg,
> + TCGArg dst, TCGArg lhs, TCGArg rhs,
> + bool rhs_is_const)
> +{
> + /* Emit either the reg,imm or reg,reg form of a data-processing insn.
> + * rhs must satisfy the "rIN" constraint.
> + */
> + if (rhs_is_const) {
> + int rot = encode_imm(rhs);
> + if (rot < 0) {
> + rhs = -rhs;
> + rot = encode_imm(rhs);
> + assert(rot >= 0);
> + opc = opneg;
> + }
> + tcg_out_dat_imm(s, cond, opc, dst, lhs, rotl(rhs, rot) | (rot << 7));
> + } else {
> + tcg_out_dat_reg(s, cond, opc, dst, lhs, rhs, SHIFT_IMM_LSL(0));
> + }
> +}
> +
> static inline void tcg_out_mul32(TCGContext *s,
> int cond, int rd, int rs, int rm)
> {
> @@ -1634,11 +1661,13 @@ static inline void tcg_out_op(TCGContext *s, TCGOpcode opc,
> ARITH_MOV, args[0], 0, args[3], const_args[3]);
> break;
> case INDEX_op_add_i32:
> - c = ARITH_ADD;
> - goto gen_arith;
> + tcg_out_dat_rIN(s, COND_AL, ARITH_ADD, ARITH_SUB,
> + args[0], args[1], args[2], const_args[2]);
> + break;
> case INDEX_op_sub_i32:
> - c = ARITH_SUB;
> - goto gen_arith;
> + tcg_out_dat_rIN(s, COND_AL, ARITH_SUB, ARITH_ADD,
> + args[0], args[1], args[2], const_args[2]);
> + break;
> case INDEX_op_and_i32:
> tcg_out_dat_rIK(s, COND_AL, ARITH_AND, ARITH_BIC,
> args[0], args[1], args[2], const_args[2]);
> @@ -1829,8 +1858,8 @@ static const TCGTargetOpDef arm_op_defs[] = {
> { INDEX_op_st_i32, { "r", "r" } },
>
> /* TODO: "r", "r", "ri" */
> - { INDEX_op_add_i32, { "r", "r", "rI" } },
> - { INDEX_op_sub_i32, { "r", "r", "rI" } },
> + { INDEX_op_add_i32, { "r", "r", "rIN" } },
> + { INDEX_op_sub_i32, { "r", "r", "rIN" } },
> { INDEX_op_mul_i32, { "r", "r", "r" } },
> { INDEX_op_mulu2_i32, { "r", "r", "r", "r" } },
> { INDEX_op_muls2_i32, { "r", "r", "r", "r" } },
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
--
Aurelien Jarno GPG: 1024D/F1BCDB73
aurelien@aurel32.net http://www.aurel32.net
next prev parent reply other threads:[~2013-03-29 16:54 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-28 15:32 [Qemu-devel] [PATCH v3 00/20] tcg-arm improvements Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 01/20] tcg-arm: Use bic to implement and with constant Richard Henderson
2013-03-29 16:53 ` Aurelien Jarno
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 02/20] tcg-arm: Handle negated constant arguments to and/sub Richard Henderson
2013-03-29 16:53 ` Aurelien Jarno [this message]
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 03/20] tcg-arm: Allow constant first argument to sub Richard Henderson
2013-03-29 16:58 ` Aurelien Jarno
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 04/20] tcg-arm: Use tcg_out_dat_rIN for compares Richard Henderson
2013-03-29 16:58 ` Aurelien Jarno
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 05/20] tcg-arm: Handle constant arguments to add2/sub2 Richard Henderson
2013-03-28 15:56 ` Peter Maydell
2013-03-28 16:04 ` Richard Henderson
2013-03-28 16:09 ` Laurent Desnogues
2013-03-28 16:16 ` Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 06/20] tcg-arm: Improve constant generation Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 07/20] tcg-arm: Fold epilogue into INDEX_op_exit_tb Richard Henderson
2013-03-28 16:05 ` Peter Maydell
2013-03-28 16:12 ` Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 08/20] tcg-arm: Implement deposit for armv7 Richard Henderson
2013-03-28 16:15 ` Peter Maydell
2013-03-28 16:22 ` Richard Henderson
2013-03-28 16:59 ` Peter Maydell
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 09/20] tcg-arm: Implement division instructions Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 10/20] tcg-arm: Use TCG_REG_TMP name for the tcg temporary Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 11/20] tcg-arm: Use R12 " Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 12/20] tcg-arm: Cleanup multiply subroutines Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 13/20] tcg-arm: Cleanup tcg_out_goto_label Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 14/20] tcg-arm: Cleanup goto_tb handling Richard Henderson
2013-03-28 20:09 ` Aurelien Jarno
2013-03-28 20:48 ` Richard Henderson
2013-03-29 6:50 ` Aurelien Jarno
2013-03-29 15:06 ` Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 15/20] tcg-arm: Cleanup most primitive load store subroutines Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 16/20] tcg-arm: Fix local stack frame Richard Henderson
2013-03-29 16:50 ` Aurelien Jarno
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 17/20] tcg-arm: Split out tcg_out_tlb_read Richard Henderson
2013-03-28 15:32 ` [Qemu-devel] [PATCH v3 18/20] tcg-arm: Improve scheduling of tcg_out_tlb_read Richard Henderson
2013-03-28 15:33 ` [Qemu-devel] [PATCH v3 19/20] tcg-arm: Use movi32 + blx for calls on v7 Richard Henderson
2013-03-28 15:33 ` [Qemu-devel] [PATCH v3 20/20] tcg-arm: Convert to CONFIG_QEMU_LDST_OPTIMIZATION Richard Henderson
2013-03-28 16:44 ` Peter Maydell
2013-03-28 17:46 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130329165355.GI5000@ohm.aurel32.net \
--to=aurelien@aurel32.net \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).