From: Jeff Cody <jcody@redhat.com>
To: Kevin Wolf <kwolf@redhat.com>
Cc: famz@redhat.com, qemu-devel@nongnu.org, stefanha@redhat.com
Subject: Re: [Qemu-devel] [PATCH v2 2/9] block: vhdx - add header update capability.
Date: Mon, 5 Aug 2013 10:57:48 -0400 [thread overview]
Message-ID: <20130805145748.GB19080@localhost.localdomain> (raw)
In-Reply-To: <20130805144502.GJ2654@dhcp-200-207.str.redhat.com>
On Mon, Aug 05, 2013 at 04:45:02PM +0200, Kevin Wolf wrote:
> Am 01.08.2013 um 05:23 hat Jeff Cody geschrieben:
> > This adds the ability to update the headers in a VHDX image, including
> > generating a new MS-compatible GUID.
> >
> > As VHDX depends on uuid.h, VHDX is now a configurable build option. If
> > VHDX support is enabled, that will also enable uuid as well. The
> > default is to have VHDX enabled.
> >
> > To enable/disable VHDX: --enable-vhdx, --disable-vhdx
> >
> > Signed-off-by: Jeff Cody <jcody@redhat.com>
> > ---
> > block/Makefile.objs | 2 +-
> > block/vhdx.c | 157 +++++++++++++++++++++++++++++++++++++++++++++++++++-
> > block/vhdx.h | 12 +++-
> > configure | 13 +++++
> > 4 files changed, 180 insertions(+), 4 deletions(-)
> >
> > diff --git a/block/Makefile.objs b/block/Makefile.objs
> > index 4cf9aa4..e5e54e6 100644
> > --- a/block/Makefile.objs
> > +++ b/block/Makefile.objs
> > @@ -2,7 +2,7 @@ block-obj-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat
> > block-obj-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
> > block-obj-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
> > block-obj-y += qed-check.o
> > -block-obj-y += vhdx.o
> > +block-obj-$(CONFIG_VHDX) += vhdx.o
> > block-obj-y += parallels.o blkdebug.o blkverify.o
> > block-obj-y += snapshot.o qapi.o
> > block-obj-$(CONFIG_WIN32) += raw-win32.o win32-aio.o
> > diff --git a/block/vhdx.c b/block/vhdx.c
> > index 56bc88e..9b50442 100644
> > --- a/block/vhdx.c
> > +++ b/block/vhdx.c
> > @@ -21,6 +21,7 @@
> > #include "qemu/crc32c.h"
> > #include "block/vhdx.h"
> >
> > +#include <uuid/uuid.h>
> >
> > /* Several metadata and region table data entries are identified by
> > * guids in a MS-specific GUID format. */
> > @@ -156,11 +157,40 @@ typedef struct BDRVVHDXState {
> > VHDXBatEntry *bat;
> > uint64_t bat_offset;
> >
> > + MSGUID session_guid;
> > +
> > +
> > VHDXParentLocatorHeader parent_header;
> > VHDXParentLocatorEntry *parent_entries;
> >
> > } BDRVVHDXState;
> >
> > +/* Calculates new checksum.
> > + *
> > + * Zero is substituted during crc calculation for the original crc field
> > + * crc_offset: byte offset in buf of the buffer crc
> > + * buf: buffer pointer
> > + * size: size of buffer (must be > crc_offset+4)
> > + *
> > + * Note: The resulting checksum is in the CPU endianness, not necessarily
> > + * in the file format endianness (LE). Any header export to disk should
> > + * make sure that vhdx_header_le_export() is used to convert to the
> > + * correct endianness
> > + */
> > +uint32_t vhdx_update_checksum(uint8_t *buf, size_t size, int crc_offset)
> > +{
> > + uint32_t crc;
> > +
> > + assert(buf != NULL);
> > + assert(size > (crc_offset + 4));
>
> sizeof(crc) for consistency.
>
OK
> > +
> > + memset(buf + crc_offset, 0, sizeof(crc));
> > + crc = crc32c(0xffffffff, buf, size);
> > + memcpy(buf + crc_offset, &crc, sizeof(crc));
> > +
> > + return crc;
> > +}
> > +
> > uint32_t vhdx_checksum_calc(uint32_t crc, uint8_t *buf, size_t size,
> > int crc_offset)
> > {
> > @@ -212,6 +242,24 @@ bool vhdx_checksum_is_valid(uint8_t *buf, size_t size, int crc_offset)
> >
> >
> > /*
> > + * This generates a UUID that is compliant with the MS GUIDs used
> > + * in the VHDX spec (and elsewhere).
> > + *
> > + * We can do this with uuid_generate if uuid.h is present,
> > + * however not all systems have uuid and the generation is
> > + * pretty straightforward for the DCE + random usage case
> > + *
> > + */
> > +void vhdx_guid_generate(MSGUID *guid)
> > +{
> > + uuid_t uuid;
> > + assert(guid != NULL);
> > +
> > + uuid_generate(uuid);
> > + memcpy(guid, uuid, 16);
> > +}
>
> Should MSGUID be QEMU_PACKED to make sure that this works? Also
> sizeof(guid) instead of 16?
>
Yikes, yes it definitely should be packed.
> > +
> > +/*
> > * Per the MS VHDX Specification, for every VHDX file:
> > * - The header section is fixed size - 1 MB
> > * - The header section is always the first "object"
> > @@ -249,6 +297,107 @@ static void vhdx_header_le_import(VHDXHeader *h)
> > le64_to_cpus(&h->log_offset);
> > }
> >
> > +/* All VHDX structures on disk are little endian */
> > +static void vhdx_header_le_export(VHDXHeader *orig_h, VHDXHeader *new_h)
> > +{
> > + assert(orig_h != NULL);
> > + assert(new_h != NULL);
> > +
> > + new_h->signature = cpu_to_le32(orig_h->signature);
> > + new_h->checksum = cpu_to_le32(orig_h->checksum);
> > + new_h->sequence_number = cpu_to_le64(orig_h->sequence_number);
> > +
> > + memcpy(&new_h->file_write_guid, &orig_h->file_write_guid, sizeof(MSGUID));
> > + memcpy(&new_h->data_write_guid, &orig_h->data_write_guid, sizeof(MSGUID));
> > + memcpy(&new_h->log_guid, &orig_h->log_guid, sizeof(MSGUID));
>
> Can we avoid memcpy? I think this should work:
>
> new_h->file_write_guid = orig_h->file_write_guid;
> new_h->data_write_guid = orig_h->data_write_guid;
> new_h->log_guid = orig_h->log_guid;
>
Yes, that should work fine as well - I'll change it to that.
> > +
> > + cpu_to_leguids(&new_h->file_write_guid);
> > + cpu_to_leguids(&new_h->data_write_guid);
> > + cpu_to_leguids(&new_h->log_guid);
> > +
> > + new_h->log_version = cpu_to_le16(orig_h->log_version);
> > + new_h->version = cpu_to_le16(orig_h->version);
> > + new_h->log_length = cpu_to_le32(orig_h->log_length);
> > + new_h->log_offset = cpu_to_le64(orig_h->log_offset);
> > +}
> > +
> > +/* Update the VHDX headers
> > + *
> > + * This follows the VHDX spec procedures for header updates.
> > + *
> > + * - non-current header is updated with largest sequence number
> > + */
> > +static int vhdx_update_header(BlockDriverState *bs, BDRVVHDXState *s, bool rw)
> > +{
> > + int ret = 0;
> > + int hdr_idx = 0;
> > + uint64_t header_offset = VHDX_HEADER1_OFFSET;
> > +
> > + VHDXHeader *active_header;
> > + VHDXHeader *inactive_header;
> > + VHDXHeader header_le;
> > + uint8_t *buffer;
> > +
> > + /* operate on the non-current header */
> > + if (s->curr_header == 0) {
> > + hdr_idx = 1;
> > + header_offset = VHDX_HEADER2_OFFSET;
> > + }
> > +
> > + active_header = s->headers[s->curr_header];
> > + inactive_header = s->headers[hdr_idx];
> > +
> > + inactive_header->sequence_number = active_header->sequence_number + 1;
> > +
> > + /* a new file guid must be generate before any file write, including
> > + * headers */
> > + memcpy(&inactive_header->file_write_guid, &s->session_guid,
> > + sizeof(MSGUID));
>
> Here a simple assignment should do as well.
>
> > +
> > + /* a new data guid only needs to be generate before any guest-visible
> > + * writes, so update it if the image is opened r/w. */
> > + if (rw) {
> > + vhdx_guid_generate(&inactive_header->data_write_guid);
> > + }
> > +
> > + /* the header checksum is not over just the packed size of VHDXHeader,
> > + * but rather over the entire 'reserved' range for the header, which is
> > + * 4KB (VHDX_HEADER_SIZE). */
> > +
> > + buffer = qemu_blockalign(bs, VHDX_HEADER_SIZE);
> > + /* we can't assume the extra reserved bytes are 0 */
> > + ret = bdrv_pread(bs->file, header_offset, buffer, VHDX_HEADER_SIZE);
> > + if (ret < 0) {
> > + goto exit;
> > + }
> > + /* overwrite the actual VHDXHeader portion */
> > + memcpy(buffer, inactive_header, sizeof(VHDXHeader));
> > + inactive_header->checksum = vhdx_update_checksum(buffer,
> > + VHDX_HEADER_SIZE, 4);
> > + vhdx_header_le_export(inactive_header, &header_le);
> > + bdrv_pwrite_sync(bs->file, header_offset, &header_le, sizeof(VHDXHeader));
> > + s->curr_header = hdr_idx;
> > +
> > +exit:
> > + qemu_vfree(buffer);
> > + return ret;
> > +}
>
> Kevin
next prev parent reply other threads:[~2013-08-05 14:58 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-01 3:23 [Qemu-devel] [PATCH v2 0/9] VHDX log replay and write support Jeff Cody
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 1/9] block: vhdx - minor comments and typo correction Jeff Cody
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 2/9] block: vhdx - add header update capability Jeff Cody
2013-08-01 13:44 ` Stefan Hajnoczi
2013-08-01 14:09 ` Jeff Cody
2013-08-07 14:42 ` Jeff Cody
2013-08-05 11:42 ` Kevin Wolf
2013-08-05 14:43 ` Jeff Cody
2013-08-05 14:45 ` Kevin Wolf
2013-08-05 14:57 ` Jeff Cody [this message]
2013-08-05 15:05 ` Kevin Wolf
2013-08-05 15:09 ` Jeff Cody
2013-08-06 8:34 ` Kevin Wolf
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 3/9] block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header Jeff Cody
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 4/9] block: vhdx - log support struct and defines Jeff Cody
2013-08-01 15:00 ` Stefan Hajnoczi
2013-08-01 15:51 ` Jeff Cody
2013-08-07 15:22 ` Kevin Wolf
2013-08-07 17:18 ` Jeff Cody
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 5/9] block: vhdx - break endian translation functions out Jeff Cody
2013-08-01 15:03 ` Stefan Hajnoczi
2013-08-01 15:14 ` Jeff Cody
2013-08-07 15:29 ` Kevin Wolf
2013-08-07 17:21 ` Jeff Cody
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 6/9] block: vhdx - update log guid in header, and first write tracker Jeff Cody
2013-08-01 15:09 ` Stefan Hajnoczi
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 7/9] block: vhdx - log parsing, replay, and flush support Jeff Cody
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 8/9] block: vhdx - add log write support Jeff Cody
2013-08-01 3:23 ` [Qemu-devel] [PATCH v2 9/9] block: vhdx " Jeff Cody
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130805145748.GB19080@localhost.localdomain \
--to=jcody@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).