From: Jeff Cody <jcody@redhat.com>
To: Fam Zheng <famz@redhat.com>
Cc: kwolf@redhat.com, pmatouse@redhat.com, qemu-devel@nongnu.org,
armbru@redhat.com, stefanha@redhat.com, asias@redhat.com,
areis@redhat.com
Subject: Re: [Qemu-devel] [PATCH v3 10/10] vmdk: rename num_gtes_per_gte to num_gtes_per_gt
Date: Mon, 5 Aug 2013 23:54:55 -0400 [thread overview]
Message-ID: <20130806035455.GC12136@localhost.localdomain> (raw)
In-Reply-To: <1375753243-19530-11-git-send-email-famz@redhat.com>
On Tue, Aug 06, 2013 at 09:40:43AM +0800, Fam Zheng wrote:
> num_gtes_per_gte is a historical typo, rename it to a more sensible
> name. It means "number of GrainTableEntries per GrainTable".
Could you put this as a comment as well above/next to the declaration
of num_gtes_per_gt? It is hard not to see 'gtes' and read 'gates',
but a comment would clear that up.
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
> block/vmdk.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/block/vmdk.c b/block/vmdk.c
> index 21610e3..cb34b9f 100644
> --- a/block/vmdk.c
> +++ b/block/vmdk.c
> @@ -71,7 +71,7 @@ typedef struct {
> uint64_t granularity;
> uint64_t desc_offset;
> uint64_t desc_size;
> - uint32_t num_gtes_per_gte;
> + uint32_t num_gtes_per_gt;
> uint64_t rgd_offset;
> uint64_t gd_offset;
> uint64_t grain_offset;
> @@ -585,12 +585,12 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
> return -ENOTSUP;
> }
>
> - if (le32_to_cpu(header.num_gtes_per_gte) > 512) {
> + if (le32_to_cpu(header.num_gtes_per_gt) > 512) {
> error_report("L2 table size too big");
> return -EINVAL;
> }
>
> - l1_entry_sectors = le32_to_cpu(header.num_gtes_per_gte)
> + l1_entry_sectors = le32_to_cpu(header.num_gtes_per_gt)
> * le64_to_cpu(header.granularity);
> if (l1_entry_sectors == 0) {
> return -EINVAL;
> @@ -613,7 +613,7 @@ static int vmdk_open_vmdk4(BlockDriverState *bs,
> le64_to_cpu(header.gd_offset) << 9,
> l1_backup_offset,
> l1_size,
> - le32_to_cpu(header.num_gtes_per_gte),
> + le32_to_cpu(header.num_gtes_per_gt),
> le64_to_cpu(header.granularity),
> &extent);
> if (ret < 0) {
> @@ -1409,12 +1409,12 @@ static int vmdk_create_extent(const char *filename, int64_t filesize,
> header.compressAlgorithm = compress ? VMDK4_COMPRESSION_DEFLATE : 0;
> header.capacity = filesize / 512;
> header.granularity = 128;
> - header.num_gtes_per_gte = 512;
> + header.num_gtes_per_gt = 512;
>
> grains = (filesize / 512 + header.granularity - 1) / header.granularity;
> - gt_size = ((header.num_gtes_per_gte * sizeof(uint32_t)) + 511) >> 9;
> + gt_size = ((header.num_gtes_per_gt * sizeof(uint32_t)) + 511) >> 9;
> gt_count =
> - (grains + header.num_gtes_per_gte - 1) / header.num_gtes_per_gte;
> + (grains + header.num_gtes_per_gt - 1) / header.num_gtes_per_gt;
> gd_size = (gt_count * sizeof(uint32_t) + 511) >> 9;
>
> header.desc_offset = 1;
> @@ -1430,7 +1430,7 @@ static int vmdk_create_extent(const char *filename, int64_t filesize,
> header.flags = cpu_to_le32(header.flags);
> header.capacity = cpu_to_le64(header.capacity);
> header.granularity = cpu_to_le64(header.granularity);
> - header.num_gtes_per_gte = cpu_to_le32(header.num_gtes_per_gte);
> + header.num_gtes_per_gt = cpu_to_le32(header.num_gtes_per_gt);
> header.desc_offset = cpu_to_le64(header.desc_offset);
> header.desc_size = cpu_to_le64(header.desc_size);
> header.rgd_offset = cpu_to_le64(header.rgd_offset);
> --
> 1.8.3.4
>
next prev parent reply other threads:[~2013-08-06 3:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-06 1:40 [Qemu-devel] [PATCH v3 00/10] vmdk: Input validation fixes Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 01/10] vmdk: Make VMDK3Header QEMU_PACKED Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 02/10] vmdk: Make VmdkGrainMarker QEMU_PACKED Fam Zheng
2013-08-06 3:24 ` Jeff Cody
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 03/10] vmdk: use unsigned values for on disk header fields Fam Zheng
2013-08-06 3:30 ` Jeff Cody
2013-08-06 3:42 ` Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 04/10] qemu-iotests: add poke_file utility function Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 05/10] qemu-iotests: add empty test case for vmdk Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 06/10] vmdk: check granularity field in opening Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 07/10] vmdk: check l2 table size when opening Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 08/10] vmdk: check l1 size before opening image Fam Zheng
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 09/10] vmdk: use heap allocation for whole_grain Fam Zheng
2013-08-06 3:52 ` Jeff Cody
2013-08-06 1:40 ` [Qemu-devel] [PATCH v3 10/10] vmdk: rename num_gtes_per_gte to num_gtes_per_gt Fam Zheng
2013-08-06 3:54 ` Jeff Cody [this message]
2013-08-06 7:53 ` [Qemu-devel] [PATCH v3 00/10] vmdk: Input validation fixes Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130806035455.GC12136@localhost.localdomain \
--to=jcody@redhat.com \
--cc=areis@redhat.com \
--cc=armbru@redhat.com \
--cc=asias@redhat.com \
--cc=famz@redhat.com \
--cc=kwolf@redhat.com \
--cc=pmatouse@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).