From: Gleb Natapov <gleb@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-devel@nongnu.org, kvm@vger.kernel.org
Subject: Re: [Qemu-devel] [PATCH v3 uq/master 2/2] x86: cpuid: reconstruct leaf 0Dh data
Date: Wed, 2 Oct 2013 19:03:46 +0300 [thread overview]
Message-ID: <20131002160346.GR17294@redhat.com> (raw)
In-Reply-To: <1380729297-6282-1-git-send-email-pbonzini@redhat.com>
On Wed, Oct 02, 2013 at 05:54:57PM +0200, Paolo Bonzini wrote:
> The data in leaf 0Dh depends on information from other feature bits.
> Instead of passing it blindly from the host, compute it based on
> whether these feature bits are enabled.
>
Applied both. Thanks.
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> target-i386/cpu.c | 65 ++++++++++++++++++++++++++++++++++++++++---------------
> 1 file changed, 48 insertions(+), 17 deletions(-)
>
> diff --git a/target-i386/cpu.c b/target-i386/cpu.c
> index ac83106..1addb18 100644
> --- a/target-i386/cpu.c
> +++ b/target-i386/cpu.c
> @@ -328,6 +328,15 @@ X86RegisterInfo32 x86_reg_info_32[CPU_NB_REGS32] = {
> };
> #undef REGISTER
>
> +typedef struct ExtSaveArea {
> + uint32_t feature, bits;
> + uint32_t offset, size;
> +} ExtSaveArea;
> +
> +static const ExtSaveArea ext_save_areas[] = {
> + [2] = { .feature = FEAT_1_ECX, .bits = CPUID_EXT_AVX,
> + .offset = 0x100, .size = 0x240 },
> +};
>
> const char *get_register_name_32(unsigned int reg)
> {
> @@ -2169,29 +2178,51 @@ void cpu_x86_cpuid(CPUX86State *env, uint32_t index, uint32_t count,
> *edx = 0;
> }
> break;
> - case 0xD:
> + case 0xD: {
> + KVMState *s = cs->kvm_state;
> + uint64_t kvm_mask;
> + int i;
> +
> /* Processor Extended State */
> - if (!(env->features[FEAT_1_ECX] & CPUID_EXT_XSAVE)) {
> - *eax = 0;
> - *ebx = 0;
> - *ecx = 0;
> - *edx = 0;
> + *eax = 0;
> + *ebx = 0;
> + *ecx = 0;
> + *edx = 0;
> + if (!(env->features[FEAT_1_ECX] & CPUID_EXT_XSAVE) || !kvm_enabled()) {
> break;
> }
> - if (kvm_enabled()) {
> - KVMState *s = cs->kvm_state;
> + kvm_mask =
> + kvm_arch_get_supported_cpuid(s, 0xd, 0, R_EAX) |
> + ((uint64_t)kvm_arch_get_supported_cpuid(s, 0xd, 0, R_EDX) << 32);
>
> - *eax = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EAX);
> - *ebx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EBX);
> - *ecx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_ECX);
> - *edx = kvm_arch_get_supported_cpuid(s, 0xd, count, R_EDX);
> - } else {
> - *eax = 0;
> - *ebx = 0;
> - *ecx = 0;
> - *edx = 0;
> + if (count == 0) {
> + *ecx = 0x240;
> + for (i = 2; i < ARRAY_SIZE(ext_save_areas); i++) {
> + const ExtSaveArea *esa = &ext_save_areas[i];
> + if ((env->features[esa->feature] & esa->bits) == esa->bits &&
> + (kvm_mask & (1 << i)) != 0) {
> + if (i < 32) {
> + *eax |= 1 << i;
> + } else {
> + *edx |= 1 << (i - 32);
> + }
> + *ecx = MAX(*ecx, esa->offset + esa->size);
> + }
> + }
> + *eax |= kvm_mask & (XSTATE_FP | XSTATE_SSE);
> + *ebx = *ecx;
> + } else if (count == 1) {
> + *eax = kvm_arch_get_supported_cpuid(s, 0xd, 1, R_EAX);
> + } else if (count < ARRAY_SIZE(ext_save_areas)) {
> + const ExtSaveArea *esa = &ext_save_areas[count];
> + if ((env->features[esa->feature] & esa->bits) == esa->bits &&
> + (kvm_mask & (1 << count)) != 0) {
> + *eax = esa->offset;
> + *ebx = esa->size;
> + }
> }
> break;
> + }
> case 0x80000000:
> *eax = env->cpuid_xlevel;
> *ebx = env->cpuid_vendor1;
> --
> 1.8.3.1
--
Gleb.
next prev parent reply other threads:[~2013-10-02 16:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-13 13:55 [Qemu-devel] [PATCH v2 uq/master 0/2] KVM: issues with XSAVE support Paolo Bonzini
2013-09-13 13:55 ` [Qemu-devel] [PATCH v2 uq/master 1/2] x86: fix migration from pre-version 12 Paolo Bonzini
2013-09-13 13:55 ` [Qemu-devel] [PATCH v2 uq/master 2/2] x86: cpuid: reconstruct leaf 0Dh data Paolo Bonzini
2013-10-02 15:21 ` Gleb Natapov
2013-10-02 15:37 ` Paolo Bonzini
2013-10-02 15:39 ` Gleb Natapov
2013-10-02 15:54 ` [Qemu-devel] [PATCH v3 " Paolo Bonzini
2013-10-02 16:03 ` Gleb Natapov [this message]
2013-10-03 9:59 ` Igor Mammedov
2013-10-03 10:01 ` Gleb Natapov
2013-10-03 10:14 ` Igor Mammedov
2013-10-02 12:41 ` [Qemu-devel] [PATCH v2 uq/master 0/2] KVM: issues with XSAVE support Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131002160346.GR17294@redhat.com \
--to=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).