From: "Michael S. Tsirkin" <mst@redhat.com>
To: Igor Mammedov <imammedo@redhat.com>
Cc: stefanha@redhat.com, hutao@cn.fujitsu.com, qemu-devel@nongnu.org,
brogers@suse.com, jjherne@us.ibm.com, kraxel@redhat.com,
aliguori@amazon.com, kaneshige.kenji@jp.fujitsu.com,
chen.fan.fnst@cn.fujitsu.com, pbonzini@redhat.com,
lersek@redhat.com
Subject: Re: [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT
Date: Mon, 16 Dec 2013 21:30:14 +0200 [thread overview]
Message-ID: <20131216193014.GC21330@redhat.com> (raw)
In-Reply-To: <1386951736-929-10-git-send-email-imammedo@redhat.com>
On Fri, Dec 13, 2013 at 05:22:14PM +0100, Igor Mammedov wrote:
> .. and report range used by it to OSPM via _CRS.
> PRST is needed in SSDT since its base will depend on
> chipset and will be dynamically set by QEMU.
> Also move PRSC() method along with PRST since cross
> table reference to PRST doesn't work.
Could you clarify this last sentence?
I don't mind where it is but I'd like to know
where does the limitation come from.
>
> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
> ---
> hw/i386/acpi-dsdt-cpu-hotplug.dsl | 39 +----------------------
> hw/i386/acpi-dsdt.dsl | 2 +-
> hw/i386/q35-acpi-dsdt.dsl | 2 +-
> hw/i386/ssdt-misc.dsl | 65 +++++++++++++++++++++++++++++++++++++++
> 4 files changed, 68 insertions(+), 40 deletions(-)
>
> diff --git a/hw/i386/acpi-dsdt-cpu-hotplug.dsl b/hw/i386/acpi-dsdt-cpu-hotplug.dsl
> index 995b415..f26f81b 100644
> --- a/hw/i386/acpi-dsdt-cpu-hotplug.dsl
> +++ b/hw/i386/acpi-dsdt-cpu-hotplug.dsl
> @@ -20,6 +20,7 @@
> Scope(\_SB) {
> /* Objects filled in by run-time generated SSDT */
> External(NTFY, MethodObj)
> + External(\_SB.CPHD.PRSC, MethodObj)
> External(CPON, PkgObj)
>
> /* Methods called by run-time generated SSDT Processor objects */
> @@ -51,42 +52,4 @@ Scope(\_SB) {
> // _EJ0 method - eject callback
> Sleep(200)
> }
> -
> - OperationRegion(PRST, SystemIO, 0xaf00, 32)
> - Field(PRST, ByteAcc, NoLock, Preserve) {
> - PRS, 256
> - }
> - Method(PRSC, 0) {
> - // Local5 = active cpu bitmap
> - Store(PRS, Local5)
> - // Local2 = last read byte from bitmap
> - Store(Zero, Local2)
> - // Local0 = Processor ID / APIC ID iterator
> - Store(Zero, Local0)
> - While (LLess(Local0, SizeOf(CPON))) {
> - // Local1 = CPON flag for this cpu
> - Store(DerefOf(Index(CPON, Local0)), Local1)
> - If (And(Local0, 0x07)) {
> - // Shift down previously read bitmap byte
> - ShiftRight(Local2, 1, Local2)
> - } Else {
> - // Read next byte from cpu bitmap
> - Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2)
> - }
> - // Local3 = active state for this cpu
> - Store(And(Local2, 1), Local3)
> -
> - If (LNotEqual(Local1, Local3)) {
> - // State change - update CPON with new state
> - Store(Local3, Index(CPON, Local0))
> - // Do CPU notify
> - If (LEqual(Local3, 1)) {
> - NTFY(Local0, 1)
> - } Else {
> - NTFY(Local0, 3)
> - }
> - }
> - Increment(Local0)
> - }
> - }
> }
> diff --git a/hw/i386/acpi-dsdt.dsl b/hw/i386/acpi-dsdt.dsl
> index 90efce0..fa9f2d4 100644
> --- a/hw/i386/acpi-dsdt.dsl
> +++ b/hw/i386/acpi-dsdt.dsl
> @@ -311,7 +311,7 @@ DefinitionBlock (
> }
> Method(_E02) {
> // CPU hotplug event
> - \_SB.PRSC()
> + \_SB.CPHD.PRSC()
> }
> Method(_L03) {
> }
> diff --git a/hw/i386/q35-acpi-dsdt.dsl b/hw/i386/q35-acpi-dsdt.dsl
> index 22baa58..9ccc543 100644
> --- a/hw/i386/q35-acpi-dsdt.dsl
> +++ b/hw/i386/q35-acpi-dsdt.dsl
> @@ -420,7 +420,7 @@ DefinitionBlock (
> }
> Method(_E02) {
> // CPU hotplug event
> - \_SB.PRSC()
> + \_SB.CPHD.PRSC()
> }
> Method(_L03) {
> }
> diff --git a/hw/i386/ssdt-misc.dsl b/hw/i386/ssdt-misc.dsl
> index a4484b8..ec8893c 100644
> --- a/hw/i386/ssdt-misc.dsl
> +++ b/hw/i386/ssdt-misc.dsl
> @@ -116,4 +116,69 @@ DefinitionBlock ("ssdt-misc.aml", "SSDT", 0x01, "BXPC", "BXSSDTSUSP", 0x1)
> }
> }
> }
> + Scope(\_SB) {
> + External(NTFY, MethodObj)
> + External(CPON, PkgObj)
> +
> + Device(CPHD) {
> + Name(_HID, EISAID("PNP0C08"))
> + Name(CPPL, 32) // cpu-gpe length
> + Name(CPHP, 0xaf00)
> +
> + OperationRegion(PRST, SystemIO, CPHP, CPPL)
> + Field(PRST, ByteAcc, NoLock, Preserve) {
> + PRS, 256
> + }
> +
> + Method(PRSC, 0) {
> + // Local5 = active cpu bitmap
> + Store(PRS, Local5)
> + // Local2 = last read byte from bitmap
> + Store(Zero, Local2)
> + // Local0 = Processor ID / APIC ID iterator
> + Store(Zero, Local0)
> + While (LLess(Local0, SizeOf(CPON))) {
> + // Local1 = CPON flag for this cpu
> + Store(DerefOf(Index(CPON, Local0)), Local1)
> + If (And(Local0, 0x07)) {
> + // Shift down previously read bitmap byte
> + ShiftRight(Local2, 1, Local2)
> + } Else {
> + // Read next byte from cpu bitmap
> + Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2)
> + }
> + // Local3 = active state for this cpu
> + Store(And(Local2, 1), Local3)
> +
> + If (LNotEqual(Local1, Local3)) {
> + // State change - update CPON with new state
> + Store(Local3, Index(CPON, Local0))
> + // Do CPU notify
> + If (LEqual(Local3, 1)) {
> + NTFY(Local0, 1)
> + } Else {
> + NTFY(Local0, 3)
> + }
> + }
> + Increment(Local0)
> + }
> + }
> +
> + /* Leave bit 0 cleared to avoid Windows BSOD */
> + Name(_STA, 0xA)
> +
> + Method(_CRS, 0) {
> + Store(ResourceTemplate() {
> + IO(Decode16, 0x00, 0x00, 0x01, 0x15, IO)
> + }, Local0)
> +
> + CreateWordField(Local0, IO._MIN, IOMN)
> + CreateWordField(Local0, IO._MAX, IOMX)
> +
> + Store(CPHP, IOMN)
> + Subtract(Add(CPHP, CPPL), 1, IOMX)
> + Return(Local0)
> + }
> + } // Device(CPHD)
> + } // Scope(\_SB)
> }
> --
> 1.8.3.1
next prev parent reply other threads:[~2013-12-16 19:27 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 16:22 [Qemu-devel] [PATCH 00/11] pc: CPU hotplug support for Q35 Igor Mammedov
2013-12-13 16:22 ` [Qemu-devel] [PATCH 01/11] acpi: piix4: remove not needed GPE0 mask Igor Mammedov
2013-12-19 14:16 ` Michael S. Tsirkin
2013-12-13 16:22 ` [Qemu-devel] [PATCH 02/11] acpi: factor out common pm_update_sci() into acpi core Igor Mammedov
2013-12-19 14:16 ` Michael S. Tsirkin
2013-12-13 16:22 ` [Qemu-devel] [PATCH 03/11] acpi: factor out common cpu hotplug code for PIIX4/Q35 Igor Mammedov
2013-12-19 14:14 ` Michael S. Tsirkin
2013-12-19 15:13 ` Igor Mammedov
2013-12-13 16:22 ` [Qemu-devel] [PATCH 04/11] acpi/piix4: add readonly "cpu-hotplug-io-base" property Igor Mammedov
2013-12-13 16:22 ` [Qemu-devel] [PATCH 05/11] acpi: ich9: allow guest to clear SCI rised by GPE Igor Mammedov
2013-12-19 14:16 ` Michael S. Tsirkin
2013-12-13 16:22 ` [Qemu-devel] [PATCH 06/11] acpi/ich9: add CPU hotplug handling to Q35 machine Igor Mammedov
2013-12-19 14:18 ` Michael S. Tsirkin
2013-12-19 15:17 ` Igor Mammedov
2013-12-19 15:33 ` Michael S. Tsirkin
2013-12-13 16:22 ` [Qemu-devel] [PATCH 07/11] ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler Igor Mammedov
2013-12-13 16:22 ` [Qemu-devel] [PATCH 08/11] ACPI/DSDT-CPU: cleanup bogus comment Igor Mammedov
2013-12-13 16:22 ` [Qemu-devel] [PATCH 09/11] ACPI: move PRST OperationRegion into SSDT Igor Mammedov
2013-12-16 19:30 ` Michael S. Tsirkin [this message]
2013-12-16 20:38 ` Igor Mammedov
2013-12-16 21:13 ` Laszlo Ersek
2013-12-16 21:22 ` Laszlo Ersek
2013-12-16 21:53 ` Igor Mammedov
2013-12-17 10:39 ` Michael S. Tsirkin
2013-12-16 21:44 ` Laszlo Ersek
2013-12-16 21:59 ` Igor Mammedov
2013-12-16 22:22 ` Laszlo Ersek
2013-12-16 23:13 ` Igor Mammedov
2013-12-16 19:53 ` Michael S. Tsirkin
2013-12-16 22:15 ` Igor Mammedov
2013-12-22 14:51 ` Igor Mammedov
2013-12-23 11:26 ` Michael S. Tsirkin
2013-12-23 13:06 ` Igor Mammedov
2013-12-23 14:48 ` Michael S. Tsirkin
2013-12-23 16:24 ` Igor Mammedov
2013-12-23 16:52 ` Laszlo Ersek
2013-12-28 0:39 ` Igor Mammedov
2013-12-23 16:55 ` Michael S. Tsirkin
2013-12-13 16:22 ` [Qemu-devel] [PATCH 10/11] ACPI: set CPU hotplug io base dynamically Igor Mammedov
2013-12-13 16:22 ` [Qemu-devel] [PATCH 11/11] ACPI: update ssdt-misc.hex.generated acpi-dsdt.hex.generated q35-acpi-dsdt.hex.generated Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131216193014.GC21330@redhat.com \
--to=mst@redhat.com \
--cc=aliguori@amazon.com \
--cc=brogers@suse.com \
--cc=chen.fan.fnst@cn.fujitsu.com \
--cc=hutao@cn.fujitsu.com \
--cc=imammedo@redhat.com \
--cc=jjherne@us.ibm.com \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=kraxel@redhat.com \
--cc=lersek@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).