[Qemu-devel] [PULL 0/2]: QMP queue

[Qemu-devel] [PULL 0/2]: QMP queue

[Luiz Capitulino]

Anthony,

The following patches have been sent to the list and look good to me. I've
also tested them.

The changes (since 344eecf6995f4a0ad1d887cec922f6806f91a3f8) are available
in the following repository:

    git://repo.or.cz/qemu/qmp-unstable.git queue/qmp

Jan Kiszka (1):
      Fix qjson test of solidus encoding

Luiz Capitulino (1):
      configure: Copy test data to build directory

 check-qjson.c |    3 ++-
 configure     |    2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

Re: [Qemu-devel] [PULL 0/2]: QMP queue

[Anthony Liguori]

On 09/06/2011 11:44 AM, Luiz Capitulino wrote:
> Anthony,
>
> The following patches have been sent to the list and look good to me. I've
> also tested them.


Pulled.  Thanks.

Regards,

Anthony Liguori

>
> The changes (since 344eecf6995f4a0ad1d887cec922f6806f91a3f8) are available
> in the following repository:
>
>      git://repo.or.cz/qemu/qmp-unstable.git queue/qmp
>
> Jan Kiszka (1):
>        Fix qjson test of solidus encoding
>
> Luiz Capitulino (1):
>        configure: Copy test data to build directory
>
>   check-qjson.c |    3 ++-
>   configure     |    2 +-
>   2 files changed, 3 insertions(+), 2 deletions(-)
>
>
>

[Qemu-devel] [PULL 0/2] QMP queue

[Luiz Capitulino]

The changes (since 7cd5da7eef152a533c5774effd2e7bbfa5976c86) are available
in the following repository:

    git://repo.or.cz/qemu/qmp-unstable.git queue/qmp

Markus Armbruster (1):
  monitor: assert monitor_puts()'s loop invariant

Wen Congyang (1):
  target-i386: fix bits 39:32 of the final physical address when using
    4M page

 monitor.c                         |  1 +
 target-i386/arch_memory_mapping.c | 11 ++++++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

-- 
1.8.0

Re: [Qemu-devel] [PULL 0/2] QMP queue

[Anthony Liguori]

Pulled, thanks.

N.B.  This note may be extraneous because the pull request was sent by a
version of git older than 1.7.9 making the pull request ambigious.  Please
consider upgrading to a newer version of git.

Regards,

Anthony Liguori

[Qemu-devel] [PULL 0/2] QMP queue

[Luiz Capitulino]

Two important fixes.

The changes (since 09dada400328d75daf79e3eca1e48e024fec148d) are available
in the following repository:

    git://repo.or.cz/qemu/qmp-unstable.git queue/qmp

Amos Kong (1):
  monitor: fix the wrong order of releasing keys

Luiz Capitulino (1):
  virtio-balloon: fix integer overflow in BALLOON_CHANGE QMP event

 hw/virtio/virtio-balloon.c | 2 +-
 ui/input.c                 | 8 +++-----
 2 files changed, 4 insertions(+), 6 deletions(-)

-- 
1.8.1.4

[Qemu-devel] [PULL 0/2] QMP queue

[Luiz Capitulino]

The following changes since commit 6453a3a69488196f26d12654c6b148446abdf3d6:

  Merge remote-tracking branch 'quintela/migration.next' into staging (2013-07-15 14:49:16 -0500)

are available in the git repository at:


  git://repo.or.cz/qemu/qmp-unstable.git queue/qmp

for you to fetch changes up to f9b1d9b20f5d25b95f67a498e312f625d168fc51:

  qmp: update send-key document (2013-07-17 16:00:26 -0400)

----------------------------------------------------------------
Amos Kong (1):
      qmp: update send-key document

Luiz Capitulino (1):
      qapi: qapi-commands: fix possible leaks on visitor dealloc

 qmp-commands.hx          |  7 +++++--
 scripts/qapi-commands.py | 17 ++++++++++-------
 2 files changed, 15 insertions(+), 9 deletions(-)

[Qemu-devel] [PULL 0/2] QMP queue

[Luiz Capitulino]

I've dropped the two series which need to be respun. As the fix I have from
Paolo is pending for a long time, I figure it's better to send what I have
in the queue now.

The following changes since commit f8251db121c3f051b22a7536b97d160c30bcccd4:

  Merge remote-tracking branch 'agraf/tags/signed-ppc-for-upstream' into staging (2013-12-19 17:03:17 -0800)

are available in the git repository at:


  git://repo.or.cz/qemu/qmp-unstable.git queue/qmp

for you to fetch changes up to 15e509df38e2ae88dd045cdce62edacd033c8386:

  qemu-monitor: HMP cpu-add wrapper (2013-12-20 08:32:26 -0500)

----------------------------------------------------------------
Jason J. Herne (1):
      qemu-monitor: HMP cpu-add wrapper

Paolo Bonzini (1):
      vl: add missing transition debug->finish_migrate

 hmp-commands.hx | 13 +++++++++++++
 hmp.c           | 10 ++++++++++
 hmp.h           |  1 +
 vl.c            |  1 +
 4 files changed, 25 insertions(+)

-- 
1.8.1.4

[Qemu-devel] [PULL 1/2] vl: add missing transition debug->finish_migrate

[Luiz Capitulino]

From: Paolo Bonzini <pbonzini@redhat.com>

This fixes an abort if you invoke the "migrate" command while the
guest is being debugged.

Cc: qemu-stable@nongnu.org
Cc: lcapitulino@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
 vl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/vl.c b/vl.c
index 7511e70..0f67545 100644
--- a/vl.c
+++ b/vl.c
@@ -591,6 +591,7 @@ typedef struct {
 static const RunStateTransition runstate_transitions_def[] = {
     /*     from      ->     to      */
     { RUN_STATE_DEBUG, RUN_STATE_RUNNING },
+    { RUN_STATE_DEBUG, RUN_STATE_FINISH_MIGRATE },
 
     { RUN_STATE_INMIGRATE, RUN_STATE_RUNNING },
     { RUN_STATE_INMIGRATE, RUN_STATE_PAUSED },
-- 
1.8.1.4

[Qemu-devel] [PULL 2/2] qemu-monitor: HMP cpu-add wrapper

[Luiz Capitulino]

From: "Jason J. Herne" <jjherne@us.ibm.com>

Add HMP cpu-add wrapper to allow cpu hot plugging via monitor.

Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
---
 hmp-commands.hx | 13 +++++++++++++
 hmp.c           | 10 ++++++++++
 hmp.h           |  1 +
 3 files changed, 24 insertions(+)

diff --git a/hmp-commands.hx b/hmp-commands.hx
index ebe8e78..929550d 100644
--- a/hmp-commands.hx
+++ b/hmp-commands.hx
@@ -1620,6 +1620,19 @@ Executes a qemu-io command on the given block device.
 ETEXI
 
     {
+        .name       = "cpu-add",
+        .args_type  = "id:i",
+        .params     = "id",
+        .help       = "add cpu",
+        .mhandler.cmd  = hmp_cpu_add,
+    },
+
+STEXI
+@item cpu-add @var{id}
+Add CPU with id @var{id}
+ETEXI
+
+    {
         .name       = "info",
         .args_type  = "item:s?",
         .params     = "[subcommand]",
diff --git a/hmp.c b/hmp.c
index 32ee285..c513f9b 100644
--- a/hmp.c
+++ b/hmp.c
@@ -1525,6 +1525,16 @@ void hmp_nbd_server_stop(Monitor *mon, const QDict *qdict)
     hmp_handle_error(mon, &errp);
 }
 
+void hmp_cpu_add(Monitor *mon, const QDict *qdict)
+{
+    int cpuid;
+    Error *err = NULL;
+
+    cpuid = qdict_get_int(qdict, "id");
+    qmp_cpu_add(cpuid, &err);
+    hmp_handle_error(mon, &err);
+}
+
 void hmp_chardev_add(Monitor *mon, const QDict *qdict)
 {
     const char *args = qdict_get_str(qdict, "args");
diff --git a/hmp.h b/hmp.h
index 54cf71f..f92fc89 100644
--- a/hmp.h
+++ b/hmp.h
@@ -89,5 +89,6 @@ void hmp_nbd_server_stop(Monitor *mon, const QDict *qdict);
 void hmp_chardev_add(Monitor *mon, const QDict *qdict);
 void hmp_chardev_remove(Monitor *mon, const QDict *qdict);
 void hmp_qemu_io(Monitor *mon, const QDict *qdict);
+void hmp_cpu_add(Monitor *mon, const QDict *qdict);
 
 #endif
-- 
1.8.1.4

Re: [Qemu-devel] [PULL 0/2] QMP queue

[Luiz Capitulino]

On Fri, 20 Dec 2013 11:38:54 -0500
Luiz Capitulino <lcapitulino@redhat.com> wrote:

> I've dropped the two series which need to be respun. As the fix I have from
> Paolo is pending for a long time, I figure it's better to send what I have
> in the queue now.

Please, don't pull this one. I'm working on a more complete pull request,
will send it in some minutes.

[Qemu-devel] [PULL 0/2] QMP queue

[Luiz Capitulino]

Two trivial fixes.

The following changes since commit 6cd14054b67774cc58a51fca6660cfa1d3c08059:

  libqos virtio: Increase ISR timeout (2014-09-12 13:58:07 +0100)

are available in the git repository at:

  git://repo.or.cz/qemu/qmp-unstable.git queue/qmp

for you to fetch changes up to e4d9df4fb16861f413374b69fcdb12c8c7a4a17e:

  exec: file_ram_alloc(): print error when prealloc fails (2014-09-12 11:22:21 -0400)

----------------------------------------------------------------
Gonglei (1):
      monitor: fix debug print compiling error

Luiz Capitulino (1):
      exec: file_ram_alloc(): print error when prealloc fails

 exec.c    | 1 +
 monitor.c | 7 +++++--
 2 files changed, 6 insertions(+), 2 deletions(-)

Re: [Qemu-devel] [PULL 0/2] QMP queue

[Peter Maydell]

On 12 September 2014 13:26, Luiz Capitulino <lcapitulino@redhat.com> wrote:
> Two trivial fixes.
>
> The following changes since commit 6cd14054b67774cc58a51fca6660cfa1d3c08059:
>
>   libqos virtio: Increase ISR timeout (2014-09-12 13:58:07 +0100)
>
> are available in the git repository at:
>
>   git://repo.or.cz/qemu/qmp-unstable.git queue/qmp
>
> for you to fetch changes up to e4d9df4fb16861f413374b69fcdb12c8c7a4a17e:
>
>   exec: file_ram_alloc(): print error when prealloc fails (2014-09-12 11:22:21 -0400)
>
> ----------------------------------------------------------------
> Gonglei (1):
>       monitor: fix debug print compiling error
>
> Luiz Capitulino (1):
>       exec: file_ram_alloc(): print error when prealloc fails
>
>  exec.c    | 1 +
>  monitor.c | 7 +++++--
>  2 files changed, 6 insertions(+), 2 deletions(-)

Applied, thanks.

-- PMM