From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Stefan Priebe <s.priebe@profihost.ag>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
qemu-devel <qemu-devel@nongnu.org>,
Alexandre DERUMIER <aderumier@odiso.com>
Subject: Re: [Qemu-devel] [pve-devel] QEMU LIve Migration - swap_free: Bad swap file entry
Date: Fri, 7 Feb 2014 20:02:04 +0000 [thread overview]
Message-ID: <20140207200204.GA5013@work-vm> (raw)
In-Reply-To: <52F5321C.4090605@profihost.ag>
* Stefan Priebe (s.priebe@profihost.ag) wrote:
> anything i could try or debug? to help to find the problem?
I think the most useful would be to see if the problem is
a new problem in the 1.7 you're using or has existed
for a while; depending on the machine type you used, it might
be possible to load that image on an earlier (or newer) qemu
and try the same test, however if the problem doesn't
repeat reliably it can be hard.
If you have any way of simplifying the configuration of the
VM it would be good; e.g. if you could get a failure on
something without graphics (-nographic) and USB.
Dave
>
> Stefan
>
> Am 07.02.2014 14:45, schrieb Stefan Priebe - Profihost AG:
> >it's always the same "pattern" there are too many 0 instead of X.
> >
> >only seen:
> >
> >read:0x0000000000000000 ... expected:0xffffffffffffffff
> >
> >or
> >
> >read:0xffffffff00000000 ... expected:0xffffffffffffffff
> >
> >or
> >
> >read:0x0000bf000000bf00 ... expected:0xffffbfffffffbfff
> >
> >or
> >
> >read:0x0000000000000000 ... expected:0xb5b5b5b5b5b5b5b5
> >
> >no idea if this helps.
> >
> >Stefan
> >
> >Am 07.02.2014 14:39, schrieb Stefan Priebe - Profihost AG:
> >>Hi,
> >>Am 07.02.2014 14:19, schrieb Paolo Bonzini:
> >>>Il 07/02/2014 14:04, Stefan Priebe - Profihost AG ha scritto:
> >>>>first of all i've now a memory image of a VM where i can reproduce it.
> >>>
> >>>You mean you start that VM with -incoming 'exec:cat /path/to/vm.img'?
> >>>But google stress test doesn't report any error until you start
> >>>migration _and_ it finishes?
> >>
> >>Sorry no i meant i have a VM where i saved the memory to disk - so i
> >>don't need to wait hours until i can reproduce as it does not happen
> >>with a fresh started VM. So it's a state file i think.
> >>
> >>>Another test:
> >>>
> >>>- start the VM with -S, migrate, do errors appear on the destination?
> >>
> >>I started with -S and the errors appear AFTER resuming/unpause the VM.
> >>So it is fine until i resume it on the "new" host.
> >>
> >>Stefan
> >>
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2014-02-07 20:02 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-05 17:51 [Qemu-devel] QEMU LIve Migration - swap_free: Bad swap file entry Stefan Priebe
2014-02-05 20:15 ` Dr. David Alan Gilbert
2014-02-06 7:20 ` Stefan Priebe - Profihost AG
2014-02-06 10:22 ` Orit Wasserman
2014-02-06 10:49 ` Stefan Priebe - Profihost AG
2014-02-06 11:14 ` [Qemu-devel] [pve-devel] " Alexandre DERUMIER
2014-02-06 11:19 ` Stefan Priebe - Profihost AG
2014-02-06 11:40 ` Alexandre DERUMIER
2014-02-06 12:10 ` Stefan Priebe - Profihost AG
2014-02-06 14:03 ` Stefan Priebe - Profihost AG
2014-02-06 14:12 ` Marcin Gibuła
2014-02-06 19:51 ` Dr. David Alan Gilbert
2014-02-06 20:00 ` Stefan Priebe
2014-02-07 8:15 ` Alexandre DERUMIER
2014-02-07 8:17 ` Stefan Priebe - Profihost AG
2014-02-07 9:15 ` Dr. David Alan Gilbert
2014-02-07 9:20 ` Stefan Priebe - Profihost AG
2014-02-07 9:29 ` Marcin Gibuła
2014-02-07 9:30 ` Stefan Priebe - Profihost AG
2014-02-07 9:31 ` Dr. David Alan Gilbert
2014-02-07 9:37 ` Stefan Priebe - Profihost AG
2014-02-07 12:02 ` Stefan Priebe - Profihost AG
2014-02-07 12:21 ` Dr. David Alan Gilbert
2014-02-07 12:30 ` Stefan Priebe - Profihost AG
2014-02-07 12:44 ` Paolo Bonzini
2014-02-07 13:04 ` Stefan Priebe - Profihost AG
2014-02-07 13:08 ` Dr. David Alan Gilbert
2014-02-07 13:10 ` Stefan Priebe - Profihost AG
2014-02-07 13:15 ` Dr. David Alan Gilbert
2014-02-07 13:21 ` Stefan Priebe - Profihost AG
2014-02-07 13:19 ` Paolo Bonzini
2014-02-07 13:39 ` Stefan Priebe - Profihost AG
2014-02-07 13:45 ` Stefan Priebe - Profihost AG
2014-02-07 19:21 ` Stefan Priebe
2014-02-07 20:02 ` Dr. David Alan Gilbert [this message]
2014-02-07 20:10 ` Stefan Priebe
2014-02-08 19:23 ` Stefan Priebe
2014-02-10 9:30 ` Dr. David Alan Gilbert
2014-02-10 16:07 ` Dr. David Alan Gilbert
2014-02-10 18:53 ` Stefan Priebe
2014-02-13 20:06 ` Dr. David Alan Gilbert
2014-02-13 20:26 ` Stefan Priebe
2014-02-13 20:31 ` Stefan Priebe
2014-02-13 21:18 ` Stefan Priebe
2014-02-14 9:06 ` Dr. David Alan Gilbert
2014-02-11 13:32 ` Orit Wasserman
2014-02-11 13:33 ` Stefan Priebe - Profihost AG
2014-02-11 13:45 ` Orit Wasserman
2014-02-11 14:49 ` Stefan Priebe - Profihost AG
2014-02-07 9:59 ` Marcin Gibuła
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140207200204.GA5013@work-vm \
--to=dgilbert@redhat.com \
--cc=aderumier@odiso.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=s.priebe@profihost.ag \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).