* [Qemu-devel] [PATCH v13 01/14] block: Add BlockOpType enum
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState Fam Zheng
` (14 subsequent siblings)
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
This adds the enum of all the operations that can be taken on a block
device.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
include/block/block.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/include/block/block.h b/include/block/block.h
index 963a61f..9626650 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -151,6 +151,25 @@ typedef struct BDRVReopenState {
void *opaque;
} BDRVReopenState;
+/*
+ * Block operation types
+ */
+typedef enum BlockOpType {
+ BLOCK_OP_TYPE_BACKUP_SOURCE,
+ BLOCK_OP_TYPE_BACKUP_TARGET,
+ BLOCK_OP_TYPE_CHANGE,
+ BLOCK_OP_TYPE_COMMIT,
+ BLOCK_OP_TYPE_DATAPLANE,
+ BLOCK_OP_TYPE_DRIVE_DEL,
+ BLOCK_OP_TYPE_EJECT,
+ BLOCK_OP_TYPE_EXTERNAL_SNAPSHOT,
+ BLOCK_OP_TYPE_INTERNAL_SNAPSHOT,
+ BLOCK_OP_TYPE_INTERNAL_SNAPSHOT_DELETE,
+ BLOCK_OP_TYPE_MIRROR,
+ BLOCK_OP_TYPE_RESIZE,
+ BLOCK_OP_TYPE_STREAM,
+ BLOCK_OP_TYPE_MAX,
+} BlockOpType;
void bdrv_iostatus_enable(BlockDriverState *bs);
void bdrv_iostatus_reset(BlockDriverState *bs);
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 01/14] block: Add BlockOpType enum Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-02-13 12:24 ` Benoît Canet
2014-02-13 12:37 ` Benoît Canet
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 03/14] block: Replace in_use with operation blocker Fam Zheng
` (13 subsequent siblings)
15 siblings, 2 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
elements. Each list is a list of blockers of an operation type
(BlockOpType), that marks this BDS as currently blocked for a certain
type of operation with reason errors stored in the list. The rule of
usage is:
* BDS user who wants to take an operation should check if there's any
blocker of the type with bdrv_op_is_blocked().
* BDS user who wants to block certain types of operation, should call
bdrv_op_block (or bdrv_op_block_all to block all types of operations,
which is similar to the existing bdrv_set_in_use()).
* A blocker is only referenced by op_blockers, so the lifecycle is
managed by caller, and shouldn't be lost until unblock, so typically
a caller does these:
- Allocate a blocker with error_setg or similar, call bdrv_op_block()
to block some operations.
- Hold the blocker, do his job.
- Unblock operations that it blocked, with the same reason pointer
passed to bdrv_op_unblock().
- Release the blocker with error_free().
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++
include/block/block.h | 7 +++++
include/block/block_int.h | 5 ++++
3 files changed, 83 insertions(+)
diff --git a/block.c b/block.c
index cb21a5f..967de98 100644
--- a/block.c
+++ b/block.c
@@ -1838,6 +1838,8 @@ static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
* We do want to swap name but don't want to swap linked list entries
*/
bs_dest->node_list = bs_src->node_list;
+ memcpy(bs_dest->op_blockers, bs_src->op_blockers,
+ sizeof(bs_dest->op_blockers));
}
/*
@@ -5119,6 +5121,75 @@ void bdrv_unref(BlockDriverState *bs)
}
}
+struct BdrvOpBlocker {
+ Error *reason;
+ QLIST_ENTRY(BdrvOpBlocker) list;
+};
+
+bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
+{
+ BdrvOpBlocker *blocker;
+ assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
+ if (!QLIST_EMPTY(&bs->op_blockers[op])) {
+ blocker = QLIST_FIRST(&bs->op_blockers[op]);
+ if (errp) {
+ *errp = error_copy(blocker->reason);
+ }
+ return true;
+ }
+ return false;
+}
+
+void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
+{
+ BdrvOpBlocker *blocker;
+ assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
+
+ blocker = g_malloc0(sizeof(BdrvOpBlocker));
+ blocker->reason = reason;
+ QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
+}
+
+void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
+{
+ BdrvOpBlocker *blocker, *next;
+ assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
+ QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
+ if (blocker->reason == reason) {
+ QLIST_REMOVE(blocker, list);
+ g_free(blocker);
+ }
+ }
+}
+
+void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
+{
+ int i;
+ for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
+ bdrv_op_block(bs, i, reason);
+ }
+}
+
+void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
+{
+ int i;
+ for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
+ bdrv_op_unblock(bs, i, reason);
+ }
+}
+
+bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
+{
+ int i;
+
+ for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
+ if (!QLIST_EMPTY(&bs->op_blockers[i])) {
+ return false;
+ }
+ }
+ return true;
+}
+
void bdrv_set_in_use(BlockDriverState *bs, int in_use)
{
assert(bs->in_use != in_use);
diff --git a/include/block/block.h b/include/block/block.h
index 9626650..f4a70c9 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -473,6 +473,13 @@ void bdrv_unref(BlockDriverState *bs);
void bdrv_set_in_use(BlockDriverState *bs, int in_use);
int bdrv_in_use(BlockDriverState *bs);
+bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp);
+void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason);
+void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason);
+void bdrv_op_block_all(BlockDriverState *bs, Error *reason);
+void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason);
+bool bdrv_op_blocker_is_empty(BlockDriverState *bs);
+
#ifdef CONFIG_LINUX_AIO
int raw_get_aio_fd(BlockDriverState *bs);
#else
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 0bcf1c9..4e558d0 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -270,6 +270,8 @@ typedef struct BlockLimits {
size_t opt_mem_alignment;
} BlockLimits;
+typedef struct BdrvOpBlocker BdrvOpBlocker;
+
/*
* Note: the function bdrv_append() copies and swaps contents of
* BlockDriverStates, so if you add new fields to this struct, please
@@ -361,6 +363,9 @@ struct BlockDriverState {
QLIST_HEAD(, BdrvTrackedRequest) tracked_requests;
+ /* operation blockers */
+ QLIST_HEAD(, BdrvOpBlocker) op_blockers[BLOCK_OP_TYPE_MAX];
+
/* long-running background operation */
BlockJob *job;
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState Fam Zheng
@ 2014-02-13 12:24 ` Benoît Canet
2014-02-17 13:30 ` Fam Zheng
2014-02-13 12:37 ` Benoît Canet
1 sibling, 1 reply; 32+ messages in thread
From: Benoît Canet @ 2014-02-13 12:24 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, rjones, armbru, qemu-devel, imain, stefanha, pbonzini
The Wednesday 29 Jan 2014 à 13:07:29 (+0800), Fam Zheng wrote :
> BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
> elements. Each list is a list of blockers of an operation type
> (BlockOpType), that marks this BDS as currently blocked for a certain
> type of operation with reason errors stored in the list. The rule of
> usage is:
>
> * BDS user who wants to take an operation should check if there's any
> blocker of the type with bdrv_op_is_blocked().
>
> * BDS user who wants to block certain types of operation, should call
> bdrv_op_block (or bdrv_op_block_all to block all types of operations,
> which is similar to the existing bdrv_set_in_use()).
>
> * A blocker is only referenced by op_blockers, so the lifecycle is
> managed by caller, and shouldn't be lost until unblock, so typically
> a caller does these:
>
> - Allocate a blocker with error_setg or similar, call bdrv_op_block()
> to block some operations.
> - Hold the blocker, do his job.
> - Unblock operations that it blocked, with the same reason pointer
> passed to bdrv_op_unblock().
> - Release the blocker with error_free().
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
> block.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++
> include/block/block.h | 7 +++++
> include/block/block_int.h | 5 ++++
> 3 files changed, 83 insertions(+)
>
> diff --git a/block.c b/block.c
> index cb21a5f..967de98 100644
> --- a/block.c
> +++ b/block.c
> @@ -1838,6 +1838,8 @@ static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
> * We do want to swap name but don't want to swap linked list entries
> */
> bs_dest->node_list = bs_src->node_list;
> + memcpy(bs_dest->op_blockers, bs_src->op_blockers,
> + sizeof(bs_dest->op_blockers));
> }
>
> /*
> @@ -5119,6 +5121,75 @@ void bdrv_unref(BlockDriverState *bs)
> }
> }
>
> +struct BdrvOpBlocker {
> + Error *reason;
> + QLIST_ENTRY(BdrvOpBlocker) list;
> +};
> +
> +bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
> +{
> + BdrvOpBlocker *blocker;
> + assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
> + if (!QLIST_EMPTY(&bs->op_blockers[op])) {
> + blocker = QLIST_FIRST(&bs->op_blockers[op]);
> + if (errp) {
> + *errp = error_copy(blocker->reason);
When an operation is blocked the first reason found is returned as **errp.
I think that this could lead to some randomization of the error messages
depending on the bdrv_op_block call order.
> + }
> + return true;
> + }
> + return false;
> +}
> +
> +void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
> +{
> + BdrvOpBlocker *blocker;
> + assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
> +
> + blocker = g_malloc0(sizeof(BdrvOpBlocker));
> + blocker->reason = reason;
> + QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
> +}
> +
> +void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
> +{
> + BdrvOpBlocker *blocker, *next;
> + assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
> + QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
> + if (blocker->reason == reason) {
> + QLIST_REMOVE(blocker, list);
> + g_free(blocker);
> + }
> + }
> +}
> +
> +void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
> +{
> + int i;
> + for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
> + bdrv_op_block(bs, i, reason);
> + }
> +}
> +
> +void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
> +{
> + int i;
> + for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
> + bdrv_op_unblock(bs, i, reason);
> + }
> +}
> +
> +bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
> +{
> + int i;
> +
> + for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
> + if (!QLIST_EMPTY(&bs->op_blockers[i])) {
> + return false;
> + }
> + }
> + return true;
> +}
> +
> void bdrv_set_in_use(BlockDriverState *bs, int in_use)
> {
> assert(bs->in_use != in_use);
> diff --git a/include/block/block.h b/include/block/block.h
> index 9626650..f4a70c9 100644
> --- a/include/block/block.h
> +++ b/include/block/block.h
> @@ -473,6 +473,13 @@ void bdrv_unref(BlockDriverState *bs);
> void bdrv_set_in_use(BlockDriverState *bs, int in_use);
> int bdrv_in_use(BlockDriverState *bs);
>
> +bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp);
> +void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason);
> +void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason);
> +void bdrv_op_block_all(BlockDriverState *bs, Error *reason);
> +void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason);
> +bool bdrv_op_blocker_is_empty(BlockDriverState *bs);
> +
> #ifdef CONFIG_LINUX_AIO
> int raw_get_aio_fd(BlockDriverState *bs);
> #else
> diff --git a/include/block/block_int.h b/include/block/block_int.h
> index 0bcf1c9..4e558d0 100644
> --- a/include/block/block_int.h
> +++ b/include/block/block_int.h
> @@ -270,6 +270,8 @@ typedef struct BlockLimits {
> size_t opt_mem_alignment;
> } BlockLimits;
>
> +typedef struct BdrvOpBlocker BdrvOpBlocker;
> +
> /*
> * Note: the function bdrv_append() copies and swaps contents of
> * BlockDriverStates, so if you add new fields to this struct, please
> @@ -361,6 +363,9 @@ struct BlockDriverState {
>
> QLIST_HEAD(, BdrvTrackedRequest) tracked_requests;
>
> + /* operation blockers */
> + QLIST_HEAD(, BdrvOpBlocker) op_blockers[BLOCK_OP_TYPE_MAX];
> +
> /* long-running background operation */
> BlockJob *job;
>
> --
> 1.8.5.3
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState
2014-02-13 12:24 ` Benoît Canet
@ 2014-02-17 13:30 ` Fam Zheng
0 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-02-17 13:30 UTC (permalink / raw)
To: Benoît Canet
Cc: kwolf, rjones, armbru, qemu-devel, imain, stefanha, pbonzini
On Thu, 02/13 13:24, Benoît Canet wrote:
> The Wednesday 29 Jan 2014 à 13:07:29 (+0800), Fam Zheng wrote :
> > +bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
> > +{
> > + BdrvOpBlocker *blocker;
> > + assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
> > + if (!QLIST_EMPTY(&bs->op_blockers[op])) {
> > + blocker = QLIST_FIRST(&bs->op_blockers[op]);
> > + if (errp) {
> > + *errp = error_copy(blocker->reason);
>
> When an operation is blocked the first reason found is returned as **errp.
>
> I think that this could lead to some randomization of the error messages
> depending on the bdrv_op_block call order.
>
This is not randomization IMO.
I think for a program that could fail with more than one reasons, it fails on
and reports the first failure. This behavior is not uncommon. Being verbose
here does not show much more help, but it's still very easy to add later when
users asks for it.
Fam
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState Fam Zheng
2014-02-13 12:24 ` Benoît Canet
@ 2014-02-13 12:37 ` Benoît Canet
2014-02-17 13:30 ` Fam Zheng
1 sibling, 1 reply; 32+ messages in thread
From: Benoît Canet @ 2014-02-13 12:37 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, rjones, armbru, qemu-devel, imain, stefanha, pbonzini
The Wednesday 29 Jan 2014 à 13:07:29 (+0800), Fam Zheng wrote :
> BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
> elements. Each list is a list of blockers of an operation type
> (BlockOpType), that marks this BDS as currently blocked for a certain
> type of operation with reason errors stored in the list. The rule of
> usage is:
>
> * BDS user who wants to take an operation should check if there's any
> blocker of the type with bdrv_op_is_blocked().
>
> * BDS user who wants to block certain types of operation, should call
> bdrv_op_block (or bdrv_op_block_all to block all types of operations,
> which is similar to the existing bdrv_set_in_use()).
>
> * A blocker is only referenced by op_blockers, so the lifecycle is
> managed by caller, and shouldn't be lost until unblock, so typically
> a caller does these:
>
> - Allocate a blocker with error_setg or similar, call bdrv_op_block()
> to block some operations.
> - Hold the blocker, do his job.
> - Unblock operations that it blocked, with the same reason pointer
> passed to bdrv_op_unblock().
> - Release the blocker with error_free().
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
> block.c | 71 +++++++++++++++++++++++++++++++++++++++++++++++
> include/block/block.h | 7 +++++
> include/block/block_int.h | 5 ++++
> 3 files changed, 83 insertions(+)
>
> diff --git a/block.c b/block.c
> index cb21a5f..967de98 100644
> --- a/block.c
> +++ b/block.c
> @@ -1838,6 +1838,8 @@ static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
> * We do want to swap name but don't want to swap linked list entries
> */
> bs_dest->node_list = bs_src->node_list;
> + memcpy(bs_dest->op_blockers, bs_src->op_blockers,
> + sizeof(bs_dest->op_blockers));
> }
>
> /*
> @@ -5119,6 +5121,75 @@ void bdrv_unref(BlockDriverState *bs)
> }
> }
>
> +struct BdrvOpBlocker {
> + Error *reason;
> + QLIST_ENTRY(BdrvOpBlocker) list;
> +};
> +
> +bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
> +{
> + BdrvOpBlocker *blocker;
> + assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
> + if (!QLIST_EMPTY(&bs->op_blockers[op])) {
> + blocker = QLIST_FIRST(&bs->op_blockers[op]);
> + if (errp) {
> + *errp = error_copy(blocker->reason);
> + }
> + return true;
> + }
> + return false;
> +}
> +
> +void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
> +{
> + BdrvOpBlocker *blocker;
> + assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
> +
> + blocker = g_malloc0(sizeof(BdrvOpBlocker));
> + blocker->reason = reason;
> + QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
> +}
> +
> +void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
> +{
> + BdrvOpBlocker *blocker, *next;
> + assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
> + QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
> + if (blocker->reason == reason) {
> + QLIST_REMOVE(blocker, list);
> + g_free(blocker);
> + }
> + }
> +}
> +
> +void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
> +{
> + int i;
> + for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
> + bdrv_op_block(bs, i, reason);
> + }
> +}
> +
> +void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
> +{
> + int i;
> + for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
> + bdrv_op_unblock(bs, i, reason);
> + }
> +}
> +
> +bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
> +{
> + int i;
> +
> + for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
> + if (!QLIST_EMPTY(&bs->op_blockers[i])) {
> + return false;
> + }
> + }
> + return true;
> +}
> +
> void bdrv_set_in_use(BlockDriverState *bs, int in_use)
> {
> assert(bs->in_use != in_use);
> diff --git a/include/block/block.h b/include/block/block.h
> index 9626650..f4a70c9 100644
> --- a/include/block/block.h
> +++ b/include/block/block.h
> @@ -473,6 +473,13 @@ void bdrv_unref(BlockDriverState *bs);
> void bdrv_set_in_use(BlockDriverState *bs, int in_use);
> int bdrv_in_use(BlockDriverState *bs);
>
> +bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp);
> +void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason);
> +void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason);
> +void bdrv_op_block_all(BlockDriverState *bs, Error *reason);
> +void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason);
> +bool bdrv_op_blocker_is_empty(BlockDriverState *bs);
> +
> #ifdef CONFIG_LINUX_AIO
> int raw_get_aio_fd(BlockDriverState *bs);
> #else
> diff --git a/include/block/block_int.h b/include/block/block_int.h
> index 0bcf1c9..4e558d0 100644
> --- a/include/block/block_int.h
> +++ b/include/block/block_int.h
> @@ -270,6 +270,8 @@ typedef struct BlockLimits {
> size_t opt_mem_alignment;
> } BlockLimits;
>
> +typedef struct BdrvOpBlocker BdrvOpBlocker;
> +
> /*
> * Note: the function bdrv_append() copies and swaps contents of
> * BlockDriverStates, so if you add new fields to this struct, please
> @@ -361,6 +363,9 @@ struct BlockDriverState {
>
> QLIST_HEAD(, BdrvTrackedRequest) tracked_requests;
>
> + /* operation blockers */
> + QLIST_HEAD(, BdrvOpBlocker) op_blockers[BLOCK_OP_TYPE_MAX];
Is a loop doing QLIST_INIT on this array elements required ?
> +
> /* long-running background operation */
> BlockJob *job;
>
> --
> 1.8.5.3
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState
2014-02-13 12:37 ` Benoît Canet
@ 2014-02-17 13:30 ` Fam Zheng
0 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-02-17 13:30 UTC (permalink / raw)
To: Benoît Canet
Cc: kwolf, armbru, qemu-devel, rjones, imain, stefanha, pbonzini
On Thu, 02/13 13:37, Benoît Canet wrote:
> The Wednesday 29 Jan 2014 à 13:07:29 (+0800), Fam Zheng wrote :
> > diff --git a/include/block/block_int.h b/include/block/block_int.h
> > index 0bcf1c9..4e558d0 100644
> > --- a/include/block/block_int.h
> > +++ b/include/block/block_int.h
> > @@ -270,6 +270,8 @@ typedef struct BlockLimits {
> > size_t opt_mem_alignment;
> > } BlockLimits;
> >
> > +typedef struct BdrvOpBlocker BdrvOpBlocker;
> > +
> > /*
> > * Note: the function bdrv_append() copies and swaps contents of
> > * BlockDriverStates, so if you add new fields to this struct, please
> > @@ -361,6 +363,9 @@ struct BlockDriverState {
> >
> > QLIST_HEAD(, BdrvTrackedRequest) tracked_requests;
> >
> > + /* operation blockers */
> > + QLIST_HEAD(, BdrvOpBlocker) op_blockers[BLOCK_OP_TYPE_MAX];
>
> Is a loop doing QLIST_INIT on this array elements required ?
>
Yes, we better do it.
Thanks,
Fam
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Qemu-devel] [PATCH v13 03/14] block: Replace in_use with operation blocker
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 01/14] block: Add BlockOpType enum Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 02/14] block: Introduce op_blockers to BlockDriverState Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-02-13 12:34 ` Benoît Canet
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 04/14] block: Move op_blocker check from block_job_create to its caller Fam Zheng
` (12 subsequent siblings)
15 siblings, 1 reply; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
This drops BlockDriverState.in_use with op_blockers:
- Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
- Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
- Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
The specific types are used, e.g. in place of starting block backup,
bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).
- Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).
Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block-migration.c | 7 +++++--
block.c | 24 +++++++-----------------
blockdev.c | 15 ++++++---------
blockjob.c | 14 +++++++++-----
hw/block/dataplane/virtio-blk.c | 19 ++++++++++++-------
include/block/block.h | 2 --
include/block/block_int.h | 1 -
include/block/blockjob.h | 3 +++
8 files changed, 42 insertions(+), 43 deletions(-)
diff --git a/block-migration.c b/block-migration.c
index 897fdba..bf9a25f 100644
--- a/block-migration.c
+++ b/block-migration.c
@@ -59,6 +59,7 @@ typedef struct BlkMigDevState {
unsigned long *aio_bitmap;
int64_t completed_sectors;
BdrvDirtyBitmap *dirty_bitmap;
+ Error *blocker;
} BlkMigDevState;
typedef struct BlkMigBlock {
@@ -346,7 +347,8 @@ static void init_blk_migration_it(void *opaque, BlockDriverState *bs)
bmds->completed_sectors = 0;
bmds->shared_base = block_mig_state.shared_base;
alloc_aio_bitmap(bmds);
- bdrv_set_in_use(bs, 1);
+ error_setg(&bmds->blocker, "block device is in use by migration");
+ bdrv_op_block_all(bs, bmds->blocker);
bdrv_ref(bs);
block_mig_state.total_sector_sum += sectors;
@@ -584,7 +586,8 @@ static void blk_mig_cleanup(void)
blk_mig_lock();
while ((bmds = QSIMPLEQ_FIRST(&block_mig_state.bmds_list)) != NULL) {
QSIMPLEQ_REMOVE_HEAD(&block_mig_state.bmds_list, entry);
- bdrv_set_in_use(bmds->bs, 0);
+ bdrv_op_unblock_all(bmds->bs, bmds->blocker);
+ error_free(bmds->blocker);
bdrv_unref(bmds->bs);
g_free(bmds->aio_bitmap);
g_free(bmds);
diff --git a/block.c b/block.c
index 967de98..8000ac0 100644
--- a/block.c
+++ b/block.c
@@ -1826,7 +1826,6 @@ static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
bs_dest->refcnt = bs_src->refcnt;
/* job */
- bs_dest->in_use = bs_src->in_use;
bs_dest->job = bs_src->job;
/* keep the same entry in bdrv_states */
@@ -1863,7 +1862,7 @@ void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
assert(bs_new->job == NULL);
assert(bs_new->dev == NULL);
- assert(bs_new->in_use == 0);
+ assert(bdrv_op_blocker_is_empty(bs_new));
assert(bs_new->io_limits_enabled == false);
assert(!throttle_have_timer(&bs_new->throttle_state));
@@ -1882,7 +1881,7 @@ void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
/* Check a few fields that should remain attached to the device */
assert(bs_new->dev == NULL);
assert(bs_new->job == NULL);
- assert(bs_new->in_use == 0);
+ assert(bdrv_op_blocker_is_empty(bs_new));
assert(bs_new->io_limits_enabled == false);
assert(!throttle_have_timer(&bs_new->throttle_state));
@@ -1919,7 +1918,7 @@ static void bdrv_delete(BlockDriverState *bs)
{
assert(!bs->dev);
assert(!bs->job);
- assert(!bs->in_use);
+ assert(bdrv_op_blocker_is_empty(bs));
assert(!bs->refcnt);
assert(QLIST_EMPTY(&bs->dirty_bitmaps));
@@ -2101,7 +2100,8 @@ int bdrv_commit(BlockDriverState *bs)
return -ENOTSUP;
}
- if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
+ bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
return -EBUSY;
}
@@ -3334,8 +3334,9 @@ int bdrv_truncate(BlockDriverState *bs, int64_t offset)
return -ENOTSUP;
if (bs->read_only)
return -EACCES;
- if (bdrv_in_use(bs))
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_RESIZE, NULL)) {
return -EBUSY;
+ }
ret = drv->bdrv_truncate(bs, offset);
if (ret == 0) {
ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
@@ -5190,17 +5191,6 @@ bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
return true;
}
-void bdrv_set_in_use(BlockDriverState *bs, int in_use)
-{
- assert(bs->in_use != in_use);
- bs->in_use = in_use;
-}
-
-int bdrv_in_use(BlockDriverState *bs)
-{
- return bs->in_use;
-}
-
void bdrv_iostatus_enable(BlockDriverState *bs)
{
bs->iostatus_enabled = true;
diff --git a/blockdev.c b/blockdev.c
index 36ceece..ca66b94 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1264,8 +1264,8 @@ static void external_snapshot_prepare(BlkTransactionState *common,
return;
}
- if (bdrv_in_use(state->old_bs)) {
- error_set(errp, QERR_DEVICE_IN_USE, device);
+ if (bdrv_op_is_blocked(state->old_bs,
+ BLOCK_OP_TYPE_EXTERNAL_SNAPSHOT, errp)) {
return;
}
@@ -1489,8 +1489,7 @@ exit:
static void eject_device(BlockDriverState *bs, int force, Error **errp)
{
- if (bdrv_in_use(bs)) {
- error_set(errp, QERR_DEVICE_IN_USE, bdrv_get_device_name(bs));
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_EJECT, errp)) {
return;
}
if (!bdrv_dev_has_removable_media(bs)) {
@@ -1696,7 +1695,7 @@ int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
qerror_report(QERR_DEVICE_NOT_FOUND, id);
return -1;
}
- if (bdrv_in_use(bs)) {
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_DRIVE_DEL, NULL)) {
qerror_report(QERR_DEVICE_IN_USE, id);
return -1;
}
@@ -1949,8 +1948,7 @@ void qmp_drive_backup(const char *device, const char *target,
}
}
- if (bdrv_in_use(bs)) {
- error_set(errp, QERR_DEVICE_IN_USE, device);
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
return;
}
@@ -2084,8 +2082,7 @@ void qmp_drive_mirror(const char *device, const char *target,
}
}
- if (bdrv_in_use(bs)) {
- error_set(errp, QERR_DEVICE_IN_USE, device);
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_MIRROR, errp)) {
return;
}
diff --git a/blockjob.c b/blockjob.c
index 9e5fd5c..f1ff036 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -41,14 +41,16 @@ void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
{
BlockJob *job;
- if (bs->job || bdrv_in_use(bs)) {
+ if (bs->job || !bdrv_op_blocker_is_empty(bs)) {
error_set(errp, QERR_DEVICE_IN_USE, bdrv_get_device_name(bs));
return NULL;
}
bdrv_ref(bs);
- bdrv_set_in_use(bs, 1);
-
job = g_malloc0(driver->instance_size);
+ error_setg(&job->blocker, "block device is in use by block job: %s",
+ BlockJobType_lookup[driver->job_type]);
+ bdrv_op_block_all(bs, job->blocker);
+
job->driver = driver;
job->bs = bs;
job->cb = cb;
@@ -63,8 +65,9 @@ void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
block_job_set_speed(job, speed, &local_err);
if (error_is_set(&local_err)) {
bs->job = NULL;
+ bdrv_op_unblock_all(bs, job->blocker);
+ error_free(job->blocker);
g_free(job);
- bdrv_set_in_use(bs, 0);
error_propagate(errp, local_err);
return NULL;
}
@@ -79,8 +82,9 @@ void block_job_completed(BlockJob *job, int ret)
assert(bs->job == job);
job->cb(job->opaque, ret);
bs->job = NULL;
+ bdrv_op_unblock_all(bs, job->blocker);
+ error_free(job->blocker);
g_free(job);
- bdrv_set_in_use(bs, 0);
}
void block_job_set_speed(BlockJob *job, int64_t speed, Error **errp)
diff --git a/hw/block/dataplane/virtio-blk.c b/hw/block/dataplane/virtio-blk.c
index 456d437..4d3e157 100644
--- a/hw/block/dataplane/virtio-blk.c
+++ b/hw/block/dataplane/virtio-blk.c
@@ -69,6 +69,9 @@ struct VirtIOBlockDataPlane {
queue */
unsigned int num_reqs;
+
+ /* Operation blocker on BDS */
+ Error *blocker;
};
/* Raise an interrupt to signal guest, if necessary */
@@ -368,6 +371,7 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
{
VirtIOBlockDataPlane *s;
int fd;
+ Error *local_err = NULL;
*dataplane = NULL;
@@ -390,9 +394,10 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
/* If dataplane is (re-)enabled while the guest is running there could be
* block jobs that can conflict.
*/
- if (bdrv_in_use(blk->conf.bs)) {
- error_setg(errp,
- "cannot start dataplane thread while device is in use");
+ if (bdrv_op_is_blocked(blk->conf.bs, BLOCK_OP_TYPE_DATAPLANE, &local_err)) {
+ error_report("cannot start dataplane thread: %s",
+ error_get_pretty(local_err));
+ error_free(local_err);
return;
}
@@ -407,9 +412,8 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
s->vdev = vdev;
s->fd = fd;
s->blk = blk;
-
- /* Prevent block operations that conflict with data plane thread */
- bdrv_set_in_use(blk->conf.bs, 1);
+ error_setg(&s->blocker, "block device is in use by data plane");
+ bdrv_op_block_all(blk->conf.bs, s->blocker);
*dataplane = s;
}
@@ -421,7 +425,8 @@ void virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s)
}
virtio_blk_data_plane_stop(s);
- bdrv_set_in_use(s->blk->conf.bs, 0);
+ bdrv_op_unblock_all(s->blk->conf.bs, s->blocker);
+ error_free(s->blocker);
g_free(s);
}
diff --git a/include/block/block.h b/include/block/block.h
index f4a70c9..9125bbe 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -470,8 +470,6 @@ void bdrv_disable_copy_on_read(BlockDriverState *bs);
void bdrv_ref(BlockDriverState *bs);
void bdrv_unref(BlockDriverState *bs);
-void bdrv_set_in_use(BlockDriverState *bs, int in_use);
-int bdrv_in_use(BlockDriverState *bs);
bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp);
void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason);
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 4e558d0..1d3f76f 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -359,7 +359,6 @@ struct BlockDriverState {
QTAILQ_ENTRY(BlockDriverState) device_list;
QLIST_HEAD(, BdrvDirtyBitmap) dirty_bitmaps;
int refcnt;
- int in_use; /* users other than guest access, eg. block migration */
QLIST_HEAD(, BdrvTrackedRequest) tracked_requests;
diff --git a/include/block/blockjob.h b/include/block/blockjob.h
index d76de62..c0a7875 100644
--- a/include/block/blockjob.h
+++ b/include/block/blockjob.h
@@ -106,6 +106,9 @@ struct BlockJob {
/** The completion function that will be called when the job completes. */
BlockDriverCompletionFunc *cb;
+ /** Block other operations when block job is running */
+ Error *blocker;
+
/** The opaque value that is passed to the completion function. */
void *opaque;
};
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 03/14] block: Replace in_use with operation blocker
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 03/14] block: Replace in_use with operation blocker Fam Zheng
@ 2014-02-13 12:34 ` Benoît Canet
2014-02-17 13:21 ` Fam Zheng
0 siblings, 1 reply; 32+ messages in thread
From: Benoît Canet @ 2014-02-13 12:34 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, rjones, armbru, qemu-devel, imain, stefanha, pbonzini
The Wednesday 29 Jan 2014 à 13:07:30 (+0800), Fam Zheng wrote :
> This drops BlockDriverState.in_use with op_blockers:
>
> - Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
> - Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
> - Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
> The specific types are used, e.g. in place of starting block backup,
> bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).
> - Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).
>
> Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
> this moment. So although the checks are specific to op types, this
> changes can still be seen as identical logic with previously with
> in_use. The difference is error message are improved because of blocker
> error info.
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
> block-migration.c | 7 +++++--
> block.c | 24 +++++++-----------------
> blockdev.c | 15 ++++++---------
> blockjob.c | 14 +++++++++-----
> hw/block/dataplane/virtio-blk.c | 19 ++++++++++++-------
> include/block/block.h | 2 --
> include/block/block_int.h | 1 -
> include/block/blockjob.h | 3 +++
> 8 files changed, 42 insertions(+), 43 deletions(-)
>
> diff --git a/block-migration.c b/block-migration.c
> index 897fdba..bf9a25f 100644
> --- a/block-migration.c
> +++ b/block-migration.c
> @@ -59,6 +59,7 @@ typedef struct BlkMigDevState {
> unsigned long *aio_bitmap;
> int64_t completed_sectors;
> BdrvDirtyBitmap *dirty_bitmap;
> + Error *blocker;
> } BlkMigDevState;
>
> typedef struct BlkMigBlock {
> @@ -346,7 +347,8 @@ static void init_blk_migration_it(void *opaque, BlockDriverState *bs)
> bmds->completed_sectors = 0;
> bmds->shared_base = block_mig_state.shared_base;
> alloc_aio_bitmap(bmds);
> - bdrv_set_in_use(bs, 1);
> + error_setg(&bmds->blocker, "block device is in use by migration");
> + bdrv_op_block_all(bs, bmds->blocker);
> bdrv_ref(bs);
>
> block_mig_state.total_sector_sum += sectors;
> @@ -584,7 +586,8 @@ static void blk_mig_cleanup(void)
> blk_mig_lock();
> while ((bmds = QSIMPLEQ_FIRST(&block_mig_state.bmds_list)) != NULL) {
> QSIMPLEQ_REMOVE_HEAD(&block_mig_state.bmds_list, entry);
> - bdrv_set_in_use(bmds->bs, 0);
> + bdrv_op_unblock_all(bmds->bs, bmds->blocker);
> + error_free(bmds->blocker);
> bdrv_unref(bmds->bs);
> g_free(bmds->aio_bitmap);
> g_free(bmds);
> diff --git a/block.c b/block.c
> index 967de98..8000ac0 100644
> --- a/block.c
> +++ b/block.c
> @@ -1826,7 +1826,6 @@ static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
> bs_dest->refcnt = bs_src->refcnt;
>
> /* job */
> - bs_dest->in_use = bs_src->in_use;
> bs_dest->job = bs_src->job;
>
> /* keep the same entry in bdrv_states */
> @@ -1863,7 +1862,7 @@ void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
> assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
> assert(bs_new->job == NULL);
> assert(bs_new->dev == NULL);
> - assert(bs_new->in_use == 0);
> + assert(bdrv_op_blocker_is_empty(bs_new));
> assert(bs_new->io_limits_enabled == false);
> assert(!throttle_have_timer(&bs_new->throttle_state));
>
> @@ -1882,7 +1881,7 @@ void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
> /* Check a few fields that should remain attached to the device */
> assert(bs_new->dev == NULL);
> assert(bs_new->job == NULL);
> - assert(bs_new->in_use == 0);
> + assert(bdrv_op_blocker_is_empty(bs_new));
> assert(bs_new->io_limits_enabled == false);
> assert(!throttle_have_timer(&bs_new->throttle_state));
>
> @@ -1919,7 +1918,7 @@ static void bdrv_delete(BlockDriverState *bs)
> {
> assert(!bs->dev);
> assert(!bs->job);
> - assert(!bs->in_use);
> + assert(bdrv_op_blocker_is_empty(bs));
> assert(!bs->refcnt);
> assert(QLIST_EMPTY(&bs->dirty_bitmaps));
>
> @@ -2101,7 +2100,8 @@ int bdrv_commit(BlockDriverState *bs)
> return -ENOTSUP;
> }
>
> - if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
> + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
> + bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
> return -EBUSY;
> }
>
> @@ -3334,8 +3334,9 @@ int bdrv_truncate(BlockDriverState *bs, int64_t offset)
> return -ENOTSUP;
> if (bs->read_only)
> return -EACCES;
> - if (bdrv_in_use(bs))
> + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_RESIZE, NULL)) {
> return -EBUSY;
> + }
> ret = drv->bdrv_truncate(bs, offset);
> if (ret == 0) {
> ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
> @@ -5190,17 +5191,6 @@ bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
> return true;
> }
>
> -void bdrv_set_in_use(BlockDriverState *bs, int in_use)
> -{
> - assert(bs->in_use != in_use);
> - bs->in_use = in_use;
> -}
> -
> -int bdrv_in_use(BlockDriverState *bs)
> -{
> - return bs->in_use;
> -}
> -
> void bdrv_iostatus_enable(BlockDriverState *bs)
> {
> bs->iostatus_enabled = true;
> diff --git a/blockdev.c b/blockdev.c
> index 36ceece..ca66b94 100644
> --- a/blockdev.c
> +++ b/blockdev.c
> @@ -1264,8 +1264,8 @@ static void external_snapshot_prepare(BlkTransactionState *common,
> return;
> }
>
> - if (bdrv_in_use(state->old_bs)) {
> - error_set(errp, QERR_DEVICE_IN_USE, device);
> + if (bdrv_op_is_blocked(state->old_bs,
> + BLOCK_OP_TYPE_EXTERNAL_SNAPSHOT, errp)) {
> return;
> }
>
> @@ -1489,8 +1489,7 @@ exit:
>
> static void eject_device(BlockDriverState *bs, int force, Error **errp)
> {
> - if (bdrv_in_use(bs)) {
> - error_set(errp, QERR_DEVICE_IN_USE, bdrv_get_device_name(bs));
> + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_EJECT, errp)) {
> return;
> }
> if (!bdrv_dev_has_removable_media(bs)) {
> @@ -1696,7 +1695,7 @@ int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
> qerror_report(QERR_DEVICE_NOT_FOUND, id);
> return -1;
> }
> - if (bdrv_in_use(bs)) {
> + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_DRIVE_DEL, NULL)) {
> qerror_report(QERR_DEVICE_IN_USE, id);
> return -1;
> }
> @@ -1949,8 +1948,7 @@ void qmp_drive_backup(const char *device, const char *target,
> }
> }
>
> - if (bdrv_in_use(bs)) {
> - error_set(errp, QERR_DEVICE_IN_USE, device);
> + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
> return;
> }
>
> @@ -2084,8 +2082,7 @@ void qmp_drive_mirror(const char *device, const char *target,
> }
> }
>
> - if (bdrv_in_use(bs)) {
> - error_set(errp, QERR_DEVICE_IN_USE, device);
> + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_MIRROR, errp)) {
> return;
> }
>
> diff --git a/blockjob.c b/blockjob.c
> index 9e5fd5c..f1ff036 100644
> --- a/blockjob.c
> +++ b/blockjob.c
> @@ -41,14 +41,16 @@ void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
> {
> BlockJob *job;
>
> - if (bs->job || bdrv_in_use(bs)) {
> + if (bs->job || !bdrv_op_blocker_is_empty(bs)) {
> error_set(errp, QERR_DEVICE_IN_USE, bdrv_get_device_name(bs));
> return NULL;
> }
> bdrv_ref(bs);
> - bdrv_set_in_use(bs, 1);
> -
> job = g_malloc0(driver->instance_size);
> + error_setg(&job->blocker, "block device is in use by block job: %s",
> + BlockJobType_lookup[driver->job_type]);
> + bdrv_op_block_all(bs, job->blocker);
> +
> job->driver = driver;
> job->bs = bs;
> job->cb = cb;
> @@ -63,8 +65,9 @@ void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
> block_job_set_speed(job, speed, &local_err);
> if (error_is_set(&local_err)) {
> bs->job = NULL;
> + bdrv_op_unblock_all(bs, job->blocker);
> + error_free(job->blocker);
> g_free(job);
> - bdrv_set_in_use(bs, 0);
> error_propagate(errp, local_err);
> return NULL;
> }
> @@ -79,8 +82,9 @@ void block_job_completed(BlockJob *job, int ret)
> assert(bs->job == job);
> job->cb(job->opaque, ret);
> bs->job = NULL;
> + bdrv_op_unblock_all(bs, job->blocker);
> + error_free(job->blocker);
> g_free(job);
> - bdrv_set_in_use(bs, 0);
> }
>
> void block_job_set_speed(BlockJob *job, int64_t speed, Error **errp)
> diff --git a/hw/block/dataplane/virtio-blk.c b/hw/block/dataplane/virtio-blk.c
> index 456d437..4d3e157 100644
> --- a/hw/block/dataplane/virtio-blk.c
> +++ b/hw/block/dataplane/virtio-blk.c
> @@ -69,6 +69,9 @@ struct VirtIOBlockDataPlane {
> queue */
>
> unsigned int num_reqs;
> +
> + /* Operation blocker on BDS */
> + Error *blocker;
> };
>
> /* Raise an interrupt to signal guest, if necessary */
> @@ -368,6 +371,7 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
> {
> VirtIOBlockDataPlane *s;
> int fd;
> + Error *local_err = NULL;
>
> *dataplane = NULL;
>
> @@ -390,9 +394,10 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
> /* If dataplane is (re-)enabled while the guest is running there could be
> * block jobs that can conflict.
> */
> - if (bdrv_in_use(blk->conf.bs)) {
> - error_setg(errp,
> - "cannot start dataplane thread while device is in use");
> + if (bdrv_op_is_blocked(blk->conf.bs, BLOCK_OP_TYPE_DATAPLANE, &local_err)) {
> + error_report("cannot start dataplane thread: %s",
> + error_get_pretty(local_err));
> + error_free(local_err);
> return;
> }
>
> @@ -407,9 +412,8 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
> s->vdev = vdev;
> s->fd = fd;
> s->blk = blk;
> -
> - /* Prevent block operations that conflict with data plane thread */
The comment was not really an extra.
> - bdrv_set_in_use(blk->conf.bs, 1);
> + error_setg(&s->blocker, "block device is in use by data plane");
> + bdrv_op_block_all(blk->conf.bs, s->blocker);
>
> *dataplane = s;
> }
> @@ -421,7 +425,8 @@ void virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s)
> }
>
> virtio_blk_data_plane_stop(s);
> - bdrv_set_in_use(s->blk->conf.bs, 0);
> + bdrv_op_unblock_all(s->blk->conf.bs, s->blocker);
> + error_free(s->blocker);
> g_free(s);
> }
>
> diff --git a/include/block/block.h b/include/block/block.h
> index f4a70c9..9125bbe 100644
> --- a/include/block/block.h
> +++ b/include/block/block.h
> @@ -470,8 +470,6 @@ void bdrv_disable_copy_on_read(BlockDriverState *bs);
>
> void bdrv_ref(BlockDriverState *bs);
> void bdrv_unref(BlockDriverState *bs);
> -void bdrv_set_in_use(BlockDriverState *bs, int in_use);
> -int bdrv_in_use(BlockDriverState *bs);
>
> bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp);
> void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason);
> diff --git a/include/block/block_int.h b/include/block/block_int.h
> index 4e558d0..1d3f76f 100644
> --- a/include/block/block_int.h
> +++ b/include/block/block_int.h
> @@ -359,7 +359,6 @@ struct BlockDriverState {
> QTAILQ_ENTRY(BlockDriverState) device_list;
> QLIST_HEAD(, BdrvDirtyBitmap) dirty_bitmaps;
> int refcnt;
> - int in_use; /* users other than guest access, eg. block migration */
>
> QLIST_HEAD(, BdrvTrackedRequest) tracked_requests;
>
> diff --git a/include/block/blockjob.h b/include/block/blockjob.h
> index d76de62..c0a7875 100644
> --- a/include/block/blockjob.h
> +++ b/include/block/blockjob.h
> @@ -106,6 +106,9 @@ struct BlockJob {
> /** The completion function that will be called when the job completes. */
> BlockDriverCompletionFunc *cb;
>
> + /** Block other operations when block job is running */
> + Error *blocker;
> +
> /** The opaque value that is passed to the completion function. */
> void *opaque;
> };
> --
> 1.8.5.3
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 03/14] block: Replace in_use with operation blocker
2014-02-13 12:34 ` Benoît Canet
@ 2014-02-17 13:21 ` Fam Zheng
0 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-02-17 13:21 UTC (permalink / raw)
To: Benoît Canet
Cc: kwolf, armbru, qemu-devel, rjones, imain, stefanha, pbonzini
On Thu, 02/13 13:34, Benoît Canet wrote:
> The Wednesday 29 Jan 2014 à 13:07:30 (+0800), Fam Zheng wrote :
> > @@ -368,6 +371,7 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
> > {
> > VirtIOBlockDataPlane *s;
> > int fd;
> > + Error *local_err = NULL;
> >
> > *dataplane = NULL;
> >
> > @@ -390,9 +394,10 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
> > /* If dataplane is (re-)enabled while the guest is running there could be
> > * block jobs that can conflict.
> > */
> > - if (bdrv_in_use(blk->conf.bs)) {
> > - error_setg(errp,
> > - "cannot start dataplane thread while device is in use");
> > + if (bdrv_op_is_blocked(blk->conf.bs, BLOCK_OP_TYPE_DATAPLANE, &local_err)) {
> > + error_report("cannot start dataplane thread: %s",
> > + error_get_pretty(local_err));
> > + error_free(local_err);
> > return;
> > }
> >
> > @@ -407,9 +412,8 @@ void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk,
> > s->vdev = vdev;
> > s->fd = fd;
> > s->blk = blk;
> > -
> > - /* Prevent block operations that conflict with data plane thread */
> The comment was not really an extra.
>
But the code is even more self-explanatory now :)
Fam
> > - bdrv_set_in_use(blk->conf.bs, 1);
> > + error_setg(&s->blocker, "block device is in use by data plane");
> > + bdrv_op_block_all(blk->conf.bs, s->blocker);
> >
> > *dataplane = s;
> > }
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Qemu-devel] [PATCH v13 04/14] block: Move op_blocker check from block_job_create to its caller
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (2 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 03/14] block: Replace in_use with operation blocker Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 05/14] block: Add bdrv_set_backing_hd() Fam Zheng
` (11 subsequent siblings)
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
It makes no sense to check for "any" blocker on bs, we are here only
because of the mechanical conversion from in_use to op_blockers. Remove
it now, and let the callers check specific operation types. Backup and
mirror already have it, add checker to stream and commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
blockdev.c | 8 ++++++++
blockjob.c | 2 +-
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/blockdev.c b/blockdev.c
index ca66b94..ffaa6a9 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1817,6 +1817,10 @@ void qmp_block_stream(const char *device, bool has_base,
return;
}
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_STREAM, errp)) {
+ return;
+ }
+
if (base) {
base_bs = bdrv_find_backing_image(bs, base);
if (base_bs == NULL) {
@@ -1857,6 +1861,10 @@ void qmp_block_commit(const char *device,
return;
}
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, errp)) {
+ return;
+ }
+
/* default top_bs is the active layer */
top_bs = bs;
diff --git a/blockjob.c b/blockjob.c
index f1ff036..21e21c0 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -41,7 +41,7 @@ void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
{
BlockJob *job;
- if (bs->job || !bdrv_op_blocker_is_empty(bs)) {
+ if (bs->job) {
error_set(errp, QERR_DEVICE_IN_USE, bdrv_get_device_name(bs));
return NULL;
}
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Qemu-devel] [PATCH v13 05/14] block: Add bdrv_set_backing_hd()
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (3 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 04/14] block: Move op_blocker check from block_job_create to its caller Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-02-13 12:49 ` Benoît Canet
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 06/14] block: Add backing_blocker in BlockDriverState Fam Zheng
` (10 subsequent siblings)
15 siblings, 1 reply; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
This is the common but non-trivial steps to assign or change the
backing_hd of BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block.c | 34 +++++++++++++++++++++++++---------
include/block/block.h | 1 +
2 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/block.c b/block.c
index 8000ac0..c4eaa37 100644
--- a/block.c
+++ b/block.c
@@ -1072,6 +1072,26 @@ fail:
return ret;
}
+void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
+{
+ if (bs->backing_hd) {
+ bdrv_unref(bs->backing_hd);
+ }
+
+ bs->backing_hd = backing_hd;
+ if (!backing_hd) {
+ bs->backing_file[0] = '\0';
+ bs->backing_format[0] = '\0';
+ goto out;
+ }
+ pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
+ pstrcpy(bs->backing_format, sizeof(bs->backing_file),
+ backing_hd->drv ? backing_hd->drv->format_name : "");
+ bdrv_ref(bs->backing_hd);
+out:
+ bdrv_refresh_limits(bs);
+}
+
/*
* Opens the backing file for a BlockDriverState if not yet open
*
@@ -1085,6 +1105,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
char backing_filename[PATH_MAX];
int back_flags, ret;
BlockDriver *back_drv = NULL;
+ BlockDriverState *backing_hd;
Error *local_err = NULL;
if (bs->backing_hd != NULL) {
@@ -1108,7 +1129,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
sizeof(backing_filename));
}
- bs->backing_hd = bdrv_new("");
+ backing_hd = bdrv_new("");
if (bs->backing_format[0] != '\0') {
back_drv = bdrv_find_format(bs->backing_format);
@@ -1118,23 +1139,18 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
BDRV_O_COPY_ON_READ);
- ret = bdrv_open(bs->backing_hd,
+ ret = bdrv_open(backing_hd,
*backing_filename ? backing_filename : NULL, options,
back_flags, back_drv, &local_err);
if (ret < 0) {
- bdrv_unref(bs->backing_hd);
- bs->backing_hd = NULL;
+ bdrv_unref(backing_hd);
bs->open_flags |= BDRV_O_NO_BACKING;
error_setg(errp, "Could not open backing file: %s",
error_get_pretty(local_err));
error_free(local_err);
return ret;
}
-
- if (bs->backing_hd->file) {
- pstrcpy(bs->backing_file, sizeof(bs->backing_file),
- bs->backing_hd->file->filename);
- }
+ bdrv_set_backing_hd(bs, backing_hd);
/* Recalculate the BlockLimits with the backing file */
bdrv_refresh_limits(bs);
diff --git a/include/block/block.h b/include/block/block.h
index 9125bbe..f449753 100644
--- a/include/block/block.h
+++ b/include/block/block.h
@@ -208,6 +208,7 @@ int bdrv_file_open(BlockDriverState **pbs, const char *filename,
int bdrv_open_image(BlockDriverState **pbs, const char *filename,
QDict *options, const char *bdref_key, int flags,
bool force_raw, bool allow_none, Error **errp);
+void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd);
int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp);
int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
int flags, BlockDriver *drv, Error **errp);
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 05/14] block: Add bdrv_set_backing_hd()
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 05/14] block: Add bdrv_set_backing_hd() Fam Zheng
@ 2014-02-13 12:49 ` Benoît Canet
2014-02-17 13:31 ` Fam Zheng
0 siblings, 1 reply; 32+ messages in thread
From: Benoît Canet @ 2014-02-13 12:49 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, rjones, armbru, qemu-devel, imain, stefanha, pbonzini
The Wednesday 29 Jan 2014 à 13:07:32 (+0800), Fam Zheng wrote :
> This is the common but non-trivial steps to assign or change the
> backing_hd of BDS.
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
> block.c | 34 +++++++++++++++++++++++++---------
> include/block/block.h | 1 +
> 2 files changed, 26 insertions(+), 9 deletions(-)
>
> diff --git a/block.c b/block.c
> index 8000ac0..c4eaa37 100644
> --- a/block.c
> +++ b/block.c
> @@ -1072,6 +1072,26 @@ fail:
> return ret;
> }
>
> +void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
> +{
> + if (bs->backing_hd) {
> + bdrv_unref(bs->backing_hd);
> + }
> +
> + bs->backing_hd = backing_hd;
> + if (!backing_hd) {
> + bs->backing_file[0] = '\0';
> + bs->backing_format[0] = '\0';
> + goto out;
> + }
> + pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
> + pstrcpy(bs->backing_format, sizeof(bs->backing_file),
I don't understand the sizeof(bs->backing_file). Is it sizeof(bs->backing_format) ?
> + backing_hd->drv ? backing_hd->drv->format_name : "");
> + bdrv_ref(bs->backing_hd);
> +out:
> + bdrv_refresh_limits(bs);
> +}
> +
> /*
> * Opens the backing file for a BlockDriverState if not yet open
> *
> @@ -1085,6 +1105,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
> char backing_filename[PATH_MAX];
> int back_flags, ret;
> BlockDriver *back_drv = NULL;
> + BlockDriverState *backing_hd;
> Error *local_err = NULL;
>
> if (bs->backing_hd != NULL) {
> @@ -1108,7 +1129,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
> sizeof(backing_filename));
> }
>
> - bs->backing_hd = bdrv_new("");
> + backing_hd = bdrv_new("");
>
> if (bs->backing_format[0] != '\0') {
> back_drv = bdrv_find_format(bs->backing_format);
> @@ -1118,23 +1139,18 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
> back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
> BDRV_O_COPY_ON_READ);
>
> - ret = bdrv_open(bs->backing_hd,
> + ret = bdrv_open(backing_hd,
> *backing_filename ? backing_filename : NULL, options,
> back_flags, back_drv, &local_err);
> if (ret < 0) {
> - bdrv_unref(bs->backing_hd);
> - bs->backing_hd = NULL;
> + bdrv_unref(backing_hd);
Here I wonder if this way of calling bdrv_open and doing a bdrv_unref confict
with Max latests bdrv_open patches.
You probably need to rebase and get rid of this bdrv_unref() : check Max series
to be sure.
> bs->open_flags |= BDRV_O_NO_BACKING;
> error_setg(errp, "Could not open backing file: %s",
> error_get_pretty(local_err));
> error_free(local_err);
> return ret;
> }
> -
> - if (bs->backing_hd->file) {
> - pstrcpy(bs->backing_file, sizeof(bs->backing_file),
> - bs->backing_hd->file->filename);
> - }
> + bdrv_set_backing_hd(bs, backing_hd);
>
> /* Recalculate the BlockLimits with the backing file */
> bdrv_refresh_limits(bs);
> diff --git a/include/block/block.h b/include/block/block.h
> index 9125bbe..f449753 100644
> --- a/include/block/block.h
> +++ b/include/block/block.h
> @@ -208,6 +208,7 @@ int bdrv_file_open(BlockDriverState **pbs, const char *filename,
> int bdrv_open_image(BlockDriverState **pbs, const char *filename,
> QDict *options, const char *bdref_key, int flags,
> bool force_raw, bool allow_none, Error **errp);
> +void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd);
> int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp);
> int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
> int flags, BlockDriver *drv, Error **errp);
> --
> 1.8.5.3
>
>
bdrv_set_backing_hd seems to be handy since some people want to dynamically
change backing_file using QMP to move them from slow storage to fast storage and
the reverse.
Best regards
Benoît
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 05/14] block: Add bdrv_set_backing_hd()
2014-02-13 12:49 ` Benoît Canet
@ 2014-02-17 13:31 ` Fam Zheng
0 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-02-17 13:31 UTC (permalink / raw)
To: Benoît Canet
Cc: kwolf, armbru, qemu-devel, rjones, imain, stefanha, pbonzini
On Thu, 02/13 13:49, Benoît Canet wrote:
> The Wednesday 29 Jan 2014 à 13:07:32 (+0800), Fam Zheng wrote :
> > This is the common but non-trivial steps to assign or change the
> > backing_hd of BDS.
> >
> > Signed-off-by: Fam Zheng <famz@redhat.com>
> > ---
> > block.c | 34 +++++++++++++++++++++++++---------
> > include/block/block.h | 1 +
> > 2 files changed, 26 insertions(+), 9 deletions(-)
> >
> > diff --git a/block.c b/block.c
> > index 8000ac0..c4eaa37 100644
> > --- a/block.c
> > +++ b/block.c
> > @@ -1072,6 +1072,26 @@ fail:
> > return ret;
> > }
> >
> > +void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
> > +{
> > + if (bs->backing_hd) {
> > + bdrv_unref(bs->backing_hd);
> > + }
> > +
> > + bs->backing_hd = backing_hd;
> > + if (!backing_hd) {
> > + bs->backing_file[0] = '\0';
> > + bs->backing_format[0] = '\0';
> > + goto out;
> > + }
> > + pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
>
>
> > + pstrcpy(bs->backing_format, sizeof(bs->backing_file),
>
> I don't understand the sizeof(bs->backing_file). Is it sizeof(bs->backing_format) ?
>
Yes.
> > + backing_hd->drv ? backing_hd->drv->format_name : "");
> > + bdrv_ref(bs->backing_hd);
> > +out:
> > + bdrv_refresh_limits(bs);
> > +}
> > +
> > /*
> > * Opens the backing file for a BlockDriverState if not yet open
> > *
> > @@ -1085,6 +1105,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
> > char backing_filename[PATH_MAX];
> > int back_flags, ret;
> > BlockDriver *back_drv = NULL;
> > + BlockDriverState *backing_hd;
> > Error *local_err = NULL;
> >
> > if (bs->backing_hd != NULL) {
> > @@ -1108,7 +1129,7 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
> > sizeof(backing_filename));
> > }
> >
> > - bs->backing_hd = bdrv_new("");
> > + backing_hd = bdrv_new("");
> >
> > if (bs->backing_format[0] != '\0') {
> > back_drv = bdrv_find_format(bs->backing_format);
> > @@ -1118,23 +1139,18 @@ int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
> > back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
> > BDRV_O_COPY_ON_READ);
> >
> > - ret = bdrv_open(bs->backing_hd,
> > + ret = bdrv_open(backing_hd,
> > *backing_filename ? backing_filename : NULL, options,
> > back_flags, back_drv, &local_err);
> > if (ret < 0) {
> > - bdrv_unref(bs->backing_hd);
> > - bs->backing_hd = NULL;
> > + bdrv_unref(backing_hd);
> Here I wonder if this way of calling bdrv_open and doing a bdrv_unref confict
> with Max latests bdrv_open patches.
> You probably need to rebase and get rid of this bdrv_unref() : check Max series
> to be sure.
I'll check it.
>
> > bs->open_flags |= BDRV_O_NO_BACKING;
> > error_setg(errp, "Could not open backing file: %s",
> > error_get_pretty(local_err));
> > error_free(local_err);
> > return ret;
> > }
> > -
> > - if (bs->backing_hd->file) {
> > - pstrcpy(bs->backing_file, sizeof(bs->backing_file),
> > - bs->backing_hd->file->filename);
> > - }
> > + bdrv_set_backing_hd(bs, backing_hd);
> >
> > /* Recalculate the BlockLimits with the backing file */
> > bdrv_refresh_limits(bs);
> > diff --git a/include/block/block.h b/include/block/block.h
> > index 9125bbe..f449753 100644
> > --- a/include/block/block.h
> > +++ b/include/block/block.h
> > @@ -208,6 +208,7 @@ int bdrv_file_open(BlockDriverState **pbs, const char *filename,
> > int bdrv_open_image(BlockDriverState **pbs, const char *filename,
> > QDict *options, const char *bdref_key, int flags,
> > bool force_raw, bool allow_none, Error **errp);
> > +void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd);
> > int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp);
> > int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
> > int flags, BlockDriver *drv, Error **errp);
> > --
> > 1.8.5.3
> >
> >
>
> bdrv_set_backing_hd seems to be handy since some people want to dynamically
> change backing_file using QMP to move them from slow storage to fast storage and
> the reverse.
>
Thanks,
Fam
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Qemu-devel] [PATCH v13 06/14] block: Add backing_blocker in BlockDriverState
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (4 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 05/14] block: Add bdrv_set_backing_hd() Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 07/14] block: Parse "backing" option to reference existing BDS Fam Zheng
` (9 subsequent siblings)
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
This makes use of op_blocker and blocks all the operations except for
commit target, on each BlockDriverState->backing_hd.
The asserts for op_blocker in bdrv_swap are removed because with this
change, the target of block commit has at least the backing blocker of
its child, so the assertion is not true. Callers should do their check.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block.c | 19 +++++++++++++++----
include/block/block_int.h | 3 +++
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/block.c b/block.c
index c4eaa37..4e3b393 100644
--- a/block.c
+++ b/block.c
@@ -1075,19 +1075,33 @@ fail:
void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
{
if (bs->backing_hd) {
+ assert(error_is_set(&bs->backing_blocker));
+ bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
bdrv_unref(bs->backing_hd);
+ } else if (backing_hd) {
+ error_setg(&bs->backing_blocker,
+ "device is used as backing hd of '%s'",
+ bs->device_name);
}
bs->backing_hd = backing_hd;
if (!backing_hd) {
bs->backing_file[0] = '\0';
bs->backing_format[0] = '\0';
+ if (error_is_set(&bs->backing_blocker)) {
+ error_free(bs->backing_blocker);
+ }
goto out;
}
pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
pstrcpy(bs->backing_format, sizeof(bs->backing_file),
backing_hd->drv ? backing_hd->drv->format_name : "");
bdrv_ref(bs->backing_hd);
+
+ bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
+ /* Otherwise we won't be able to commit due to check in bdrv_commit */
+ bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
+ bs->backing_blocker);
out:
bdrv_refresh_limits(bs);
}
@@ -1675,8 +1689,7 @@ void bdrv_close(BlockDriverState *bs)
if (bs->drv) {
if (bs->backing_hd) {
- bdrv_unref(bs->backing_hd);
- bs->backing_hd = NULL;
+ bdrv_set_backing_hd(bs, NULL);
}
bs->drv->bdrv_close(bs);
g_free(bs->opaque);
@@ -1878,7 +1891,6 @@ void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
assert(bs_new->job == NULL);
assert(bs_new->dev == NULL);
- assert(bdrv_op_blocker_is_empty(bs_new));
assert(bs_new->io_limits_enabled == false);
assert(!throttle_have_timer(&bs_new->throttle_state));
@@ -1897,7 +1909,6 @@ void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
/* Check a few fields that should remain attached to the device */
assert(bs_new->dev == NULL);
assert(bs_new->job == NULL);
- assert(bdrv_op_blocker_is_empty(bs_new));
assert(bs_new->io_limits_enabled == false);
assert(!throttle_have_timer(&bs_new->throttle_state));
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 1d3f76f..1f4f78b 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -369,6 +369,9 @@ struct BlockDriverState {
BlockJob *job;
QDict *options;
+
+ /* The error object in use for blocking operations on backing_hd */
+ Error *backing_blocker;
};
int get_tmp_filename(char *filename, int size);
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Qemu-devel] [PATCH v13 07/14] block: Parse "backing" option to reference existing BDS
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (5 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 06/14] block: Add backing_blocker in BlockDriverState Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-02-13 13:17 ` Benoît Canet
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 08/14] block: Support dropping active in bdrv_drop_intermediate Fam Zheng
` (8 subsequent siblings)
15 siblings, 1 reply; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
Now it's safe to allow reference for backing_hd in the interface.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block.c | 26 ++++++++++++++++++++++++--
1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/block.c b/block.c
index 4e3b393..9d57223 100644
--- a/block.c
+++ b/block.c
@@ -1392,12 +1392,34 @@ int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
/* If there is a backing file, use it */
if ((flags & BDRV_O_NO_BACKING) == 0) {
QDict *backing_options;
+ const char *backing_name;
+ BlockDriverState *backing_hd;
+ backing_name = qdict_get_try_str(options, "backing");
qdict_extract_subqdict(options, &backing_options, "backing.");
- ret = bdrv_open_backing_file(bs, backing_options, &local_err);
- if (ret < 0) {
+
+ if (backing_name && qdict_size(backing_options)) {
+ error_setg(&local_err,
+ "Option \"backing\" and \"backing.*\" cannot be "
+ "used together");
+ ret = -EINVAL;
goto close_and_fail;
}
+ if (backing_name) {
+ backing_hd = bdrv_find(backing_name);
+ if (!backing_hd) {
+ error_set(&local_err, QERR_DEVICE_NOT_FOUND, backing_name);
+ ret = -ENOENT;
+ goto close_and_fail;
+ }
+ qdict_del(options, "backing");
+ bdrv_set_backing_hd(bs, backing_hd);
+ } else {
+ ret = bdrv_open_backing_file(bs, backing_options, &local_err);
+ if (ret < 0) {
+ goto close_and_fail;
+ }
+ }
}
/* Check if any unknown options were used */
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 07/14] block: Parse "backing" option to reference existing BDS
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 07/14] block: Parse "backing" option to reference existing BDS Fam Zheng
@ 2014-02-13 13:17 ` Benoît Canet
0 siblings, 0 replies; 32+ messages in thread
From: Benoît Canet @ 2014-02-13 13:17 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, rjones, armbru, qemu-devel, imain, stefanha, pbonzini
The Wednesday 29 Jan 2014 à 13:07:34 (+0800), Fam Zheng wrote :
> Now it's safe to allow reference for backing_hd in the interface.
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
> block.c | 26 ++++++++++++++++++++++++--
> 1 file changed, 24 insertions(+), 2 deletions(-)
>
> diff --git a/block.c b/block.c
> index 4e3b393..9d57223 100644
> --- a/block.c
> +++ b/block.c
> @@ -1392,12 +1392,34 @@ int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
> /* If there is a backing file, use it */
> if ((flags & BDRV_O_NO_BACKING) == 0) {
> QDict *backing_options;
> + const char *backing_name;
> + BlockDriverState *backing_hd;
>
> + backing_name = qdict_get_try_str(options, "backing");
> qdict_extract_subqdict(options, &backing_options, "backing.");
> - ret = bdrv_open_backing_file(bs, backing_options, &local_err);
> - if (ret < 0) {
> +
> + if (backing_name && qdict_size(backing_options)) {
> + error_setg(&local_err,
> + "Option \"backing\" and \"backing.*\" cannot be "
> + "used together");
> + ret = -EINVAL;
> goto close_and_fail;
> }
> + if (backing_name) {
> + backing_hd = bdrv_find(backing_name);
Is backing_name a reference ?
If so it would be nice if backing_name could refer to a bs by id or
or an element of the graph by node-name.
I posted a series which relax bdrv_lookup_bs rules to do so.
Maybe this could be done after merge in another patch.
> + if (!backing_hd) {
> + error_set(&local_err, QERR_DEVICE_NOT_FOUND, backing_name);
> + ret = -ENOENT;
> + goto close_and_fail;
> + }
> + qdict_del(options, "backing");
> + bdrv_set_backing_hd(bs, backing_hd);
> + } else {
> + ret = bdrv_open_backing_file(bs, backing_options, &local_err);
> + if (ret < 0) {
> + goto close_and_fail;
> + }
> + }
> }
>
> /* Check if any unknown options were used */
> --
> 1.8.5.3
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Qemu-devel] [PATCH v13 08/14] block: Support dropping active in bdrv_drop_intermediate
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (6 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 07/14] block: Parse "backing" option to reference existing BDS Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 09/14] stream: Use bdrv_drop_intermediate and drop close_unused_images Fam Zheng
` (7 subsequent siblings)
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
Dropping intermediate could be useful both for commit and stream, and
BDS refcnt plus bdrv_swap could do most of the job nicely. It also needs
to work with op blockers.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block.c | 146 +++++++++++++++++++++++++--------------------------------
block/commit.c | 1 +
2 files changed, 66 insertions(+), 81 deletions(-)
diff --git a/block.c b/block.c
index 9d57223..5719b6a 100644
--- a/block.c
+++ b/block.c
@@ -2464,115 +2464,99 @@ BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
return overlay;
}
-typedef struct BlkIntermediateStates {
- BlockDriverState *bs;
- QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
-} BlkIntermediateStates;
-
-
/*
- * Drops images above 'base' up to and including 'top', and sets the image
- * above 'top' to have base as its backing file.
+ * Drops images above 'base' up to and including 'top', and sets new 'base'
+ * as backing_hd of top_overlay (the image orignally has 'top' as backing
+ * file). top_overlay may be NULL if 'top' is active, no such update needed.
+ * Requires that the top_overlay to 'top' is opened r/w.
*
- * Requires that the overlay to 'top' is opened r/w, so that the backing file
- * information in 'bs' can be properly updated.
+ * 1) This will convert the following chain:
*
- * E.g., this will convert the following chain:
- * bottom <- base <- intermediate <- top <- active
+ * ... <- base <- ... <- top <- overlay <-... <- active
*
* to
*
- * bottom <- base <- active
+ * ... <- base <- overlay <- active
*
- * It is allowed for bottom==base, in which case it converts:
+ * 2) It is allowed for bottom==base, in which case it converts:
*
- * base <- intermediate <- top <- active
+ * base <- ... <- top <- overlay <- ... <- active
*
* to
*
- * base <- active
+ * base <- overlay <- active
+ *
+ * 2) It also allows active==top, in which case it converts:
+ *
+ * ... <- base <- ... <- top (active)
+ *
+ * to
+ *
+ * ... <- base == active == top
+ *
+ * i.e. only base and lower remains: *top == *base when return.
+ *
+ * 3) If base==NULL, it will drop all the BDS below overlay and set its
+ * backing_hd to NULL. I.e.:
+ *
+ * base(NULL) <- ... <- overlay <- ... <- active
+ *
+ * to
*
- * Error conditions:
- * if active == top, that is considered an error
+ * overlay <- ... <- active
*
*/
int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
BlockDriverState *base)
{
- BlockDriverState *intermediate;
- BlockDriverState *base_bs = NULL;
- BlockDriverState *new_top_bs = NULL;
- BlkIntermediateStates *intermediate_state, *next;
- int ret = -EIO;
-
- QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
- QSIMPLEQ_INIT(&states_to_delete);
-
- if (!top->drv || !base->drv) {
- goto exit;
- }
-
- new_top_bs = bdrv_find_overlay(active, top);
+ BlockDriverState *drop_start, *overlay;
+ int ret = -EINVAL;
- if (new_top_bs == NULL) {
- /* we could not find the image above 'top', this is an error */
+ if (!top->drv || (base && !base->drv)) {
goto exit;
}
-
- /* special case of new_top_bs->backing_hd already pointing to base - nothing
- * to do, no intermediate images */
- if (new_top_bs->backing_hd == base) {
+ if (top == base) {
ret = 0;
- goto exit;
- }
-
- intermediate = top;
-
- /* now we will go down through the list, and add each BDS we find
- * into our deletion queue, until we hit the 'base'
- */
- while (intermediate) {
- intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
- intermediate_state->bs = intermediate;
- QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
-
- if (intermediate->backing_hd == base) {
- base_bs = intermediate->backing_hd;
- break;
+ } else if (top == active) {
+ assert(base);
+ drop_start = active->backing_hd;
+ bdrv_swap(active, base);
+ base->backing_hd = NULL;
+ bdrv_unref(drop_start);
+ ret = 0;
+ } else {
+ /* If there's an overlay, its backing_hd points to top's BDS now,
+ * the top image is dropped but this BDS structure is kept and swapped
+ * with base, this way we keep the pointers valid after dropping top */
+ overlay = bdrv_find_overlay(active, top);
+ if (!overlay) {
+ goto exit;
+ }
+ if (base) {
+ ret = bdrv_change_backing_file(overlay, base->filename,
+ base->drv->format_name);
+ } else {
+ ret = bdrv_change_backing_file(overlay, NULL, NULL);
+ }
+ if (ret) {
+ goto exit;
+ }
+ if (base) {
+ drop_start = top->backing_hd;
+ bdrv_swap(top, base);
+ /* Break the loop formed by bdrv_swap */
+ bdrv_set_backing_hd(base, NULL);
+ } else {
+ bdrv_set_backing_hd(overlay, NULL);
+ drop_start = top;
}
- intermediate = intermediate->backing_hd;
- }
- if (base_bs == NULL) {
- /* something went wrong, we did not end at the base. safely
- * unravel everything, and exit with error */
- goto exit;
- }
-
- /* success - we can delete the intermediate states, and link top->base */
- ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
- base_bs->drv ? base_bs->drv->format_name : "");
- if (ret) {
- goto exit;
- }
- new_top_bs->backing_hd = base_bs;
-
- bdrv_refresh_limits(new_top_bs);
- QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
- /* so that bdrv_close() does not recursively close the chain */
- intermediate_state->bs->backing_hd = NULL;
- bdrv_unref(intermediate_state->bs);
+ bdrv_unref(drop_start);
}
- ret = 0;
-
exit:
- QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
- g_free(intermediate_state);
- }
return ret;
}
-
static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
size_t size)
{
diff --git a/block/commit.c b/block/commit.c
index acec4ac..b10eb79 100644
--- a/block/commit.c
+++ b/block/commit.c
@@ -142,6 +142,7 @@ wait:
if (!block_job_is_cancelled(&s->common) && sector_num == end) {
/* success */
ret = bdrv_drop_intermediate(active, top, base);
+ base = top;
}
exit_free_buf:
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Qemu-devel] [PATCH v13 09/14] stream: Use bdrv_drop_intermediate and drop close_unused_images
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (7 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 08/14] block: Support dropping active in bdrv_drop_intermediate Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 10/14] qmp: Add command 'blockdev-backup' Fam Zheng
` (6 subsequent siblings)
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
This reuses the new bdrv_drop_intermediate.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block/stream.c | 30 +-----------------------------
1 file changed, 1 insertion(+), 29 deletions(-)
diff --git a/block/stream.c b/block/stream.c
index dd0b4ac..9cdcf0e 100644
--- a/block/stream.c
+++ b/block/stream.c
@@ -51,34 +51,6 @@ static int coroutine_fn stream_populate(BlockDriverState *bs,
return bdrv_co_copy_on_readv(bs, sector_num, nb_sectors, &qiov);
}
-static void close_unused_images(BlockDriverState *top, BlockDriverState *base,
- const char *base_id)
-{
- BlockDriverState *intermediate;
- intermediate = top->backing_hd;
-
- /* Must assign before bdrv_delete() to prevent traversing dangling pointer
- * while we delete backing image instances.
- */
- top->backing_hd = base;
-
- while (intermediate) {
- BlockDriverState *unused;
-
- /* reached base */
- if (intermediate == base) {
- break;
- }
-
- unused = intermediate;
- intermediate = intermediate->backing_hd;
- unused->backing_hd = NULL;
- bdrv_unref(unused);
- }
-
- bdrv_refresh_limits(top);
-}
-
static void coroutine_fn stream_run(void *opaque)
{
StreamBlockJob *s = opaque;
@@ -192,7 +164,7 @@ wait:
}
}
ret = bdrv_change_backing_file(bs, base_id, base_fmt);
- close_unused_images(bs, base, base_id);
+ bdrv_drop_intermediate(bs, bs->backing_hd, base);
}
qemu_vfree(buf);
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Qemu-devel] [PATCH v13 10/14] qmp: Add command 'blockdev-backup'
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (8 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 09/14] stream: Use bdrv_drop_intermediate and drop close_unused_images Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-02-13 13:48 ` Benoît Canet
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 11/14] block: Allow backup on referenced named BlockDriverState Fam Zheng
` (5 subsequent siblings)
15 siblings, 1 reply; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.
Also add blocker on target bs, since the target is also a named device
now.
Add check and report error for bs == target which became possible but is
an illegal case with introduction of blockdev-backup.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block/backup.c | 26 ++++++++++++++++++++++++++
blockdev.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
qapi-schema.json | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
qmp-commands.hx | 44 ++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 166 insertions(+)
diff --git a/block/backup.c b/block/backup.c
index 15a2e55..ea46340 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -344,6 +344,7 @@ static void coroutine_fn backup_run(void *opaque)
hbitmap_free(job->bitmap);
bdrv_iostatus_disable(target);
+ bdrv_op_unblock_all(target, job->common.blocker);
bdrv_unref(target);
block_job_completed(&job->common, ret);
@@ -362,6 +363,11 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
assert(target);
assert(cb);
+ if (bs == target) {
+ error_setg(errp, "Source and target cannot be the same");
+ return;
+ }
+
if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
!bdrv_iostatus_is_enabled(bs)) {
@@ -369,6 +375,24 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
return;
}
+ if (!bdrv_is_inserted(bs)) {
+ error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, bs->device_name);
+ return;
+ }
+
+ if (!bdrv_is_inserted(target)) {
+ error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, target->device_name);
+ return;
+ }
+
+ if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
+ return;
+ }
+
+ if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_BACKUP_TARGET, errp)) {
+ return;
+ }
+
len = bdrv_getlength(bs);
if (len < 0) {
error_setg_errno(errp, -len, "unable to get length for '%s'",
@@ -382,6 +406,8 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
return;
}
+ bdrv_op_block_all(target, job->common.blocker);
+
job->on_source_error = on_source_error;
job->on_target_error = on_target_error;
job->target = target;
diff --git a/blockdev.c b/blockdev.c
index ffaa6a9..b346cc1 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1940,6 +1940,8 @@ void qmp_drive_backup(const char *device, const char *target,
return;
}
+ /* Although backup_run has this check too, we need to use bs->drv below, so
+ * do an early check redundantly. */
if (!bdrv_is_inserted(bs)) {
error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
return;
@@ -1956,6 +1958,7 @@ void qmp_drive_backup(const char *device, const char *target,
}
}
+ /* Early check to avoid creating target */
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
return;
}
@@ -2019,6 +2022,50 @@ BlockDeviceInfoList *qmp_query_named_block_nodes(Error **errp)
return bdrv_named_nodes_list();
}
+void qmp_blockdev_backup(const char *device, const char *target,
+ enum MirrorSyncMode sync,
+ bool has_speed, int64_t speed,
+ bool has_on_source_error,
+ BlockdevOnError on_source_error,
+ bool has_on_target_error,
+ BlockdevOnError on_target_error,
+ Error **errp)
+{
+ BlockDriverState *bs;
+ BlockDriverState *target_bs;
+ Error *local_err = NULL;
+
+ if (!has_speed) {
+ speed = 0;
+ }
+ if (!has_on_source_error) {
+ on_source_error = BLOCKDEV_ON_ERROR_REPORT;
+ }
+ if (!has_on_target_error) {
+ on_target_error = BLOCKDEV_ON_ERROR_REPORT;
+ }
+
+ bs = bdrv_find(device);
+ if (!bs) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, device);
+ return;
+ }
+
+ target_bs = bdrv_find(target);
+ if (!target_bs) {
+ error_set(errp, QERR_DEVICE_NOT_FOUND, target);
+ return;
+ }
+
+ bdrv_ref(target_bs);
+ backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error,
+ block_job_cb, bs, &local_err);
+ if (local_err != NULL) {
+ bdrv_unref(target_bs);
+ error_propagate(errp, local_err);
+ }
+}
+
#define DEFAULT_MIRROR_BUF_SIZE (10 << 20)
void qmp_drive_mirror(const char *device, const char *target,
diff --git a/qapi-schema.json b/qapi-schema.json
index 05ced9d..a92e1be 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1840,6 +1840,40 @@
'*on-target-error': 'BlockdevOnError' } }
##
+# @BlockdevBackup
+#
+# @device: the name of the device which should be copied.
+#
+# @target: the name of the backup target device.
+#
+# @sync: what parts of the disk image should be copied to the destination
+# (all the disk, only the sectors allocated in the topmost image, or
+# only new I/O).
+#
+# @speed: #optional the maximum speed, in bytes per second.
+#
+# @on-source-error: #optional the action to take on an error on the source,
+# default 'report'. 'stop' and 'enospc' can only be used
+# if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+# default 'report' (no limitations, since this applies to
+# a different block device than @device).
+#
+# Note that @on-source-error and @on-target-error only affect background I/O.
+# If an error occurs during a guest write request, the device's rerror/werror
+# actions will be used.
+#
+# Since: 2.0
+##
+{ 'type': 'BlockdevBackup',
+ 'data': { 'device': 'str', 'target': 'str',
+ 'sync': 'MirrorSyncMode',
+ '*speed': 'int',
+ '*on-source-error': 'BlockdevOnError',
+ '*on-target-error': 'BlockdevOnError' } }
+
+##
# @Abort
#
# This action can be used to test transaction failure.
@@ -2048,6 +2082,21 @@
{ 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] }
##
+# @blockdev-backup
+#
+# Block device version for drive-backup command. Use existing device as target
+# of backup.
+#
+# For the arguments, see the documentation of BlockdevBackup.
+#
+# Returns: Nothing on success.
+# If @device or @target is not a valid block device, DeviceNotFound.
+#
+# Since 2.0
+##
+{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' }
+
+##
# @drive-mirror
#
# Start mirroring a block device's writes to a new destination.
diff --git a/qmp-commands.hx b/qmp-commands.hx
index cce6b81..c3ee46a 100644
--- a/qmp-commands.hx
+++ b/qmp-commands.hx
@@ -1054,6 +1054,50 @@ Example:
"sync": "full",
"target": "backup.img" } }
<- { "return": {} }
+
+EQMP
+
+ {
+ .name = "blockdev-backup",
+ .args_type = "sync:s,device:B,target:B,speed:i?,"
+ "on-source-error:s?,on-target-error:s?",
+ .mhandler.cmd_new = qmp_marshal_input_blockdev_backup,
+ },
+
+SQMP
+blockdev-backup
+------------
+
+The device version of drive-backup: this command takes a existing named device
+as backup target.
+
+Arguments:
+
+- "device": the name of the device which should be copied.
+ (json-string)
+- "target": the target of the new image. If the file exists, or if it is a
+ device, the existing file/device will be used as the new
+ destination. If it does not exist, a new file will be created.
+ (json-string)
+- "sync": what parts of the disk image should be copied to the destination;
+ possibilities include "full" for all the disk, "top" for only the
+ sectors allocated in the topmost image, or "none" to only replicate
+ new I/O (MirrorSyncMode).
+- "speed": the maximum speed, in bytes per second (json-int, optional)
+- "on-source-error": the action to take on an error on the source, default
+ 'report'. 'stop' and 'enospc' can only be used
+ if the block device supports io-status.
+ (BlockdevOnError, optional)
+- "on-target-error": the action to take on an error on the target, default
+ 'report' (no limitations, since this applies to
+ a different block device than device).
+ (BlockdevOnError, optional)
+
+Example:
+-> { "execute": "blockdev-backup", "arguments": { "device": "src-id",
+ "target": "tgt-id" } }
+<- { "return": {} }
+
EQMP
{
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 10/14] qmp: Add command 'blockdev-backup'
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 10/14] qmp: Add command 'blockdev-backup' Fam Zheng
@ 2014-02-13 13:48 ` Benoît Canet
2014-02-17 13:32 ` Fam Zheng
0 siblings, 1 reply; 32+ messages in thread
From: Benoît Canet @ 2014-02-13 13:48 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, rjones, armbru, qemu-devel, imain, stefanha, pbonzini
The Wednesday 29 Jan 2014 à 13:07:37 (+0800), Fam Zheng wrote :
> Similar to drive-backup, but this command uses a device id as target
> instead of creating/opening an image file.
>
> Also add blocker on target bs, since the target is also a named device
> now.
>
> Add check and report error for bs == target which became possible but is
> an illegal case with introduction of blockdev-backup.
>
> Signed-off-by: Fam Zheng <famz@redhat.com>
> ---
> block/backup.c | 26 ++++++++++++++++++++++++++
> blockdev.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
> qapi-schema.json | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
> qmp-commands.hx | 44 ++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 166 insertions(+)
>
> diff --git a/block/backup.c b/block/backup.c
> index 15a2e55..ea46340 100644
> --- a/block/backup.c
> +++ b/block/backup.c
> @@ -344,6 +344,7 @@ static void coroutine_fn backup_run(void *opaque)
> hbitmap_free(job->bitmap);
>
> bdrv_iostatus_disable(target);
> + bdrv_op_unblock_all(target, job->common.blocker);
> bdrv_unref(target);
>
> block_job_completed(&job->common, ret);
> @@ -362,6 +363,11 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> assert(target);
> assert(cb);
>
> + if (bs == target) {
> + error_setg(errp, "Source and target cannot be the same");
> + return;
> + }
> +
> if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
> on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
> !bdrv_iostatus_is_enabled(bs)) {
> @@ -369,6 +375,24 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> return;
> }
>
> + if (!bdrv_is_inserted(bs)) {
> + error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, bs->device_name);
> + return;
> + }
> +
> + if (!bdrv_is_inserted(target)) {
> + error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, target->device_name);
> + return;
> + }
> +
> + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
> + return;
> + }
> +
> + if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_BACKUP_TARGET, errp)) {
> + return;
> + }
> +
> len = bdrv_getlength(bs);
> if (len < 0) {
> error_setg_errno(errp, -len, "unable to get length for '%s'",
> @@ -382,6 +406,8 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> return;
> }
>
> + bdrv_op_block_all(target, job->common.blocker);
> +
> job->on_source_error = on_source_error;
> job->on_target_error = on_target_error;
> job->target = target;
> diff --git a/blockdev.c b/blockdev.c
> index ffaa6a9..b346cc1 100644
> --- a/blockdev.c
> +++ b/blockdev.c
> @@ -1940,6 +1940,8 @@ void qmp_drive_backup(const char *device, const char *target,
> return;
> }
>
> + /* Although backup_run has this check too, we need to use bs->drv below, so
> + * do an early check redundantly. */
> if (!bdrv_is_inserted(bs)) {
> error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
> return;
> @@ -1956,6 +1958,7 @@ void qmp_drive_backup(const char *device, const char *target,
> }
> }
>
> + /* Early check to avoid creating target */
> if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
> return;
> }
> @@ -2019,6 +2022,50 @@ BlockDeviceInfoList *qmp_query_named_block_nodes(Error **errp)
> return bdrv_named_nodes_list();
> }
>
> +void qmp_blockdev_backup(const char *device, const char *target,
> + enum MirrorSyncMode sync,
> + bool has_speed, int64_t speed,
> + bool has_on_source_error,
> + BlockdevOnError on_source_error,
> + bool has_on_target_error,
> + BlockdevOnError on_target_error,
> + Error **errp)
> +{
> + BlockDriverState *bs;
> + BlockDriverState *target_bs;
> + Error *local_err = NULL;
> +
> + if (!has_speed) {
> + speed = 0;
> + }
> + if (!has_on_source_error) {
> + on_source_error = BLOCKDEV_ON_ERROR_REPORT;
> + }
> + if (!has_on_target_error) {
> + on_target_error = BLOCKDEV_ON_ERROR_REPORT;
> + }
> +
> + bs = bdrv_find(device);
This and the qmp prototype should be upgraded to the new device and node-name
alternative and make use of bdrv_lookup_bs().
> + if (!bs) {
> + error_set(errp, QERR_DEVICE_NOT_FOUND, device);
> + return;
> + }
> +
> + target_bs = bdrv_find(target);
> + if (!target_bs) {
> + error_set(errp, QERR_DEVICE_NOT_FOUND, target);
> + return;
> + }
> +
> + bdrv_ref(target_bs);
> + backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error,
> + block_job_cb, bs, &local_err);
> + if (local_err != NULL) {
> + bdrv_unref(target_bs);
> + error_propagate(errp, local_err);
> + }
> +}
> +
> #define DEFAULT_MIRROR_BUF_SIZE (10 << 20)
>
> void qmp_drive_mirror(const char *device, const char *target,
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 05ced9d..a92e1be 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -1840,6 +1840,40 @@
> '*on-target-error': 'BlockdevOnError' } }
>
> ##
> +# @BlockdevBackup
> +#
> +# @device: the name of the device which should be copied.
> +#
> +# @target: the name of the backup target device.
> +#
> +# @sync: what parts of the disk image should be copied to the destination
> +# (all the disk, only the sectors allocated in the topmost image, or
> +# only new I/O).
> +#
> +# @speed: #optional the maximum speed, in bytes per second.
> +#
> +# @on-source-error: #optional the action to take on an error on the source,
> +# default 'report'. 'stop' and 'enospc' can only be used
> +# if the block device supports io-status (see BlockInfo).
> +#
> +# @on-target-error: #optional the action to take on an error on the target,
> +# default 'report' (no limitations, since this applies to
> +# a different block device than @device).
> +#
> +# Note that @on-source-error and @on-target-error only affect background I/O.
> +# If an error occurs during a guest write request, the device's rerror/werror
> +# actions will be used.
> +#
> +# Since: 2.0
> +##
> +{ 'type': 'BlockdevBackup',
> + 'data': { 'device': 'str', 'target': 'str',
'*device': 'str', '*node-name': str,
I don't know if it's necessary for target.
> + 'sync': 'MirrorSyncMode',
> + '*speed': 'int',
> + '*on-source-error': 'BlockdevOnError',
> + '*on-target-error': 'BlockdevOnError' } }
> +
> +##
> # @Abort
> #
> # This action can be used to test transaction failure.
> @@ -2048,6 +2082,21 @@
> { 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] }
>
> ##
> +# @blockdev-backup
> +#
> +# Block device version for drive-backup command. Use existing device as target
> +# of backup.
> +#
> +# For the arguments, see the documentation of BlockdevBackup.
> +#
> +# Returns: Nothing on success.
> +# If @device or @target is not a valid block device, DeviceNotFound.
> +#
> +# Since 2.0
> +##
> +{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' }
> +
> +##
> # @drive-mirror
> #
> # Start mirroring a block device's writes to a new destination.
> diff --git a/qmp-commands.hx b/qmp-commands.hx
> index cce6b81..c3ee46a 100644
> --- a/qmp-commands.hx
> +++ b/qmp-commands.hx
> @@ -1054,6 +1054,50 @@ Example:
> "sync": "full",
> "target": "backup.img" } }
> <- { "return": {} }
> +
> +EQMP
> +
> + {
> + .name = "blockdev-backup",
> + .args_type = "sync:s,device:B,target:B,speed:i?,"
> + "on-source-error:s?,on-target-error:s?",
> + .mhandler.cmd_new = qmp_marshal_input_blockdev_backup,
> + },
> +
> +SQMP
> +blockdev-backup
> +------------
> +
> +The device version of drive-backup: this command takes a existing named device
> +as backup target.
> +
> +Arguments:
> +
> +- "device": the name of the device which should be copied.
> + (json-string)
> +- "target": the target of the new image. If the file exists, or if it is a
> + device, the existing file/device will be used as the new
> + destination. If it does not exist, a new file will be created.
> + (json-string)
> +- "sync": what parts of the disk image should be copied to the destination;
> + possibilities include "full" for all the disk, "top" for only the
> + sectors allocated in the topmost image, or "none" to only replicate
> + new I/O (MirrorSyncMode).
> +- "speed": the maximum speed, in bytes per second (json-int, optional)
> +- "on-source-error": the action to take on an error on the source, default
> + 'report'. 'stop' and 'enospc' can only be used
> + if the block device supports io-status.
> + (BlockdevOnError, optional)
> +- "on-target-error": the action to take on an error on the target, default
> + 'report' (no limitations, since this applies to
> + a different block device than device).
> + (BlockdevOnError, optional)
> +
> +Example:
> +-> { "execute": "blockdev-backup", "arguments": { "device": "src-id",
> + "target": "tgt-id" } }
> +<- { "return": {} }
> +
> EQMP
>
> {
> --
> 1.8.5.3
>
>
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 10/14] qmp: Add command 'blockdev-backup'
2014-02-13 13:48 ` Benoît Canet
@ 2014-02-17 13:32 ` Fam Zheng
2014-02-17 14:23 ` Benoît Canet
0 siblings, 1 reply; 32+ messages in thread
From: Fam Zheng @ 2014-02-17 13:32 UTC (permalink / raw)
To: Benoît Canet
Cc: kwolf, rjones, armbru, qemu-devel, imain, stefanha, pbonzini
On Thu, 02/13 14:48, Benoît Canet wrote:
> The Wednesday 29 Jan 2014 à 13:07:37 (+0800), Fam Zheng wrote :
> > Similar to drive-backup, but this command uses a device id as target
> > instead of creating/opening an image file.
> >
> > Also add blocker on target bs, since the target is also a named device
> > now.
> >
> > Add check and report error for bs == target which became possible but is
> > an illegal case with introduction of blockdev-backup.
> >
> > Signed-off-by: Fam Zheng <famz@redhat.com>
> > ---
> > block/backup.c | 26 ++++++++++++++++++++++++++
> > blockdev.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
> > qapi-schema.json | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
> > qmp-commands.hx | 44 ++++++++++++++++++++++++++++++++++++++++++++
> > 4 files changed, 166 insertions(+)
> >
> > diff --git a/block/backup.c b/block/backup.c
> > index 15a2e55..ea46340 100644
> > --- a/block/backup.c
> > +++ b/block/backup.c
> > @@ -344,6 +344,7 @@ static void coroutine_fn backup_run(void *opaque)
> > hbitmap_free(job->bitmap);
> >
> > bdrv_iostatus_disable(target);
> > + bdrv_op_unblock_all(target, job->common.blocker);
> > bdrv_unref(target);
> >
> > block_job_completed(&job->common, ret);
> > @@ -362,6 +363,11 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> > assert(target);
> > assert(cb);
> >
> > + if (bs == target) {
> > + error_setg(errp, "Source and target cannot be the same");
> > + return;
> > + }
> > +
> > if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
> > on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
> > !bdrv_iostatus_is_enabled(bs)) {
> > @@ -369,6 +375,24 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> > return;
> > }
> >
> > + if (!bdrv_is_inserted(bs)) {
> > + error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, bs->device_name);
> > + return;
> > + }
> > +
> > + if (!bdrv_is_inserted(target)) {
> > + error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, target->device_name);
> > + return;
> > + }
> > +
> > + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
> > + return;
> > + }
> > +
> > + if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_BACKUP_TARGET, errp)) {
> > + return;
> > + }
> > +
> > len = bdrv_getlength(bs);
> > if (len < 0) {
> > error_setg_errno(errp, -len, "unable to get length for '%s'",
> > @@ -382,6 +406,8 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> > return;
> > }
> >
> > + bdrv_op_block_all(target, job->common.blocker);
> > +
> > job->on_source_error = on_source_error;
> > job->on_target_error = on_target_error;
> > job->target = target;
> > diff --git a/blockdev.c b/blockdev.c
> > index ffaa6a9..b346cc1 100644
> > --- a/blockdev.c
> > +++ b/blockdev.c
> > @@ -1940,6 +1940,8 @@ void qmp_drive_backup(const char *device, const char *target,
> > return;
> > }
> >
> > + /* Although backup_run has this check too, we need to use bs->drv below, so
> > + * do an early check redundantly. */
> > if (!bdrv_is_inserted(bs)) {
> > error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
> > return;
> > @@ -1956,6 +1958,7 @@ void qmp_drive_backup(const char *device, const char *target,
> > }
> > }
> >
> > + /* Early check to avoid creating target */
> > if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
> > return;
> > }
> > @@ -2019,6 +2022,50 @@ BlockDeviceInfoList *qmp_query_named_block_nodes(Error **errp)
> > return bdrv_named_nodes_list();
> > }
> >
> > +void qmp_blockdev_backup(const char *device, const char *target,
> > + enum MirrorSyncMode sync,
> > + bool has_speed, int64_t speed,
> > + bool has_on_source_error,
> > + BlockdevOnError on_source_error,
> > + bool has_on_target_error,
> > + BlockdevOnError on_target_error,
> > + Error **errp)
> > +{
> > + BlockDriverState *bs;
> > + BlockDriverState *target_bs;
> > + Error *local_err = NULL;
> > +
> > + if (!has_speed) {
> > + speed = 0;
> > + }
> > + if (!has_on_source_error) {
> > + on_source_error = BLOCKDEV_ON_ERROR_REPORT;
> > + }
> > + if (!has_on_target_error) {
> > + on_target_error = BLOCKDEV_ON_ERROR_REPORT;
> > + }
> > +
> > + bs = bdrv_find(device);
> This and the qmp prototype should be upgraded to the new device and node-name
> alternative and make use of bdrv_lookup_bs().
>
Can we do it later in a separate patch?
Fam
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 10/14] qmp: Add command 'blockdev-backup'
2014-02-17 13:32 ` Fam Zheng
@ 2014-02-17 14:23 ` Benoît Canet
0 siblings, 0 replies; 32+ messages in thread
From: Benoît Canet @ 2014-02-17 14:23 UTC (permalink / raw)
To: Fam Zheng
Cc: Benoît Canet, kwolf, armbru, qemu-devel, rjones, imain,
stefanha, pbonzini
The Monday 17 Feb 2014 à 21:32:51 (+0800), Fam Zheng wrote :
> On Thu, 02/13 14:48, Benoît Canet wrote:
> > The Wednesday 29 Jan 2014 à 13:07:37 (+0800), Fam Zheng wrote :
> > > Similar to drive-backup, but this command uses a device id as target
> > > instead of creating/opening an image file.
> > >
> > > Also add blocker on target bs, since the target is also a named device
> > > now.
> > >
> > > Add check and report error for bs == target which became possible but is
> > > an illegal case with introduction of blockdev-backup.
> > >
> > > Signed-off-by: Fam Zheng <famz@redhat.com>
> > > ---
> > > block/backup.c | 26 ++++++++++++++++++++++++++
> > > blockdev.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++
> > > qapi-schema.json | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
> > > qmp-commands.hx | 44 ++++++++++++++++++++++++++++++++++++++++++++
> > > 4 files changed, 166 insertions(+)
> > >
> > > diff --git a/block/backup.c b/block/backup.c
> > > index 15a2e55..ea46340 100644
> > > --- a/block/backup.c
> > > +++ b/block/backup.c
> > > @@ -344,6 +344,7 @@ static void coroutine_fn backup_run(void *opaque)
> > > hbitmap_free(job->bitmap);
> > >
> > > bdrv_iostatus_disable(target);
> > > + bdrv_op_unblock_all(target, job->common.blocker);
> > > bdrv_unref(target);
> > >
> > > block_job_completed(&job->common, ret);
> > > @@ -362,6 +363,11 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> > > assert(target);
> > > assert(cb);
> > >
> > > + if (bs == target) {
> > > + error_setg(errp, "Source and target cannot be the same");
> > > + return;
> > > + }
> > > +
> > > if ((on_source_error == BLOCKDEV_ON_ERROR_STOP ||
> > > on_source_error == BLOCKDEV_ON_ERROR_ENOSPC) &&
> > > !bdrv_iostatus_is_enabled(bs)) {
> > > @@ -369,6 +375,24 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> > > return;
> > > }
> > >
> > > + if (!bdrv_is_inserted(bs)) {
> > > + error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, bs->device_name);
> > > + return;
> > > + }
> > > +
> > > + if (!bdrv_is_inserted(target)) {
> > > + error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, target->device_name);
> > > + return;
> > > + }
> > > +
> > > + if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
> > > + return;
> > > + }
> > > +
> > > + if (bdrv_op_is_blocked(target, BLOCK_OP_TYPE_BACKUP_TARGET, errp)) {
> > > + return;
> > > + }
> > > +
> > > len = bdrv_getlength(bs);
> > > if (len < 0) {
> > > error_setg_errno(errp, -len, "unable to get length for '%s'",
> > > @@ -382,6 +406,8 @@ void backup_start(BlockDriverState *bs, BlockDriverState *target,
> > > return;
> > > }
> > >
> > > + bdrv_op_block_all(target, job->common.blocker);
> > > +
> > > job->on_source_error = on_source_error;
> > > job->on_target_error = on_target_error;
> > > job->target = target;
> > > diff --git a/blockdev.c b/blockdev.c
> > > index ffaa6a9..b346cc1 100644
> > > --- a/blockdev.c
> > > +++ b/blockdev.c
> > > @@ -1940,6 +1940,8 @@ void qmp_drive_backup(const char *device, const char *target,
> > > return;
> > > }
> > >
> > > + /* Although backup_run has this check too, we need to use bs->drv below, so
> > > + * do an early check redundantly. */
> > > if (!bdrv_is_inserted(bs)) {
> > > error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
> > > return;
> > > @@ -1956,6 +1958,7 @@ void qmp_drive_backup(const char *device, const char *target,
> > > }
> > > }
> > >
> > > + /* Early check to avoid creating target */
> > > if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
> > > return;
> > > }
> > > @@ -2019,6 +2022,50 @@ BlockDeviceInfoList *qmp_query_named_block_nodes(Error **errp)
> > > return bdrv_named_nodes_list();
> > > }
> > >
> > > +void qmp_blockdev_backup(const char *device, const char *target,
> > > + enum MirrorSyncMode sync,
> > > + bool has_speed, int64_t speed,
> > > + bool has_on_source_error,
> > > + BlockdevOnError on_source_error,
> > > + bool has_on_target_error,
> > > + BlockdevOnError on_target_error,
> > > + Error **errp)
> > > +{
> > > + BlockDriverState *bs;
> > > + BlockDriverState *target_bs;
> > > + Error *local_err = NULL;
> > > +
> > > + if (!has_speed) {
> > > + speed = 0;
> > > + }
> > > + if (!has_on_source_error) {
> > > + on_source_error = BLOCKDEV_ON_ERROR_REPORT;
> > > + }
> > > + if (!has_on_target_error) {
> > > + on_target_error = BLOCKDEV_ON_ERROR_REPORT;
> > > + }
> > > +
> > > + bs = bdrv_find(device);
> > This and the qmp prototype should be upgraded to the new device and node-name
> > alternative and make use of bdrv_lookup_bs().
> >
>
> Can we do it later in a separate patch?
sure.
>
> Fam
>
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Qemu-devel] [PATCH v13 11/14] block: Allow backup on referenced named BlockDriverState
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (9 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 10/14] qmp: Add command 'blockdev-backup' Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 12/14] block: Add blockdev-backup to transaction Fam Zheng
` (4 subsequent siblings)
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
Drive backup is a read only operation on source bs. We want to allow
this specific case to enable image-fleecing. Note that when
image-fleecing job starts, the job still add its blocker to source bs,
and any other operation on it will be blocked by that.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
block.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/block.c b/block.c
index 5719b6a..c022f06 100644
--- a/block.c
+++ b/block.c
@@ -1102,6 +1102,8 @@ void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
/* Otherwise we won't be able to commit due to check in bdrv_commit */
bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
bs->backing_blocker);
+ bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_BACKUP_SOURCE,
+ bs->backing_blocker);
out:
bdrv_refresh_limits(bs);
}
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Qemu-devel] [PATCH v13 12/14] block: Add blockdev-backup to transaction
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (10 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 11/14] block: Allow backup on referenced named BlockDriverState Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 13/14] qemu-iotests: Test blockdev-backup in 055 Fam Zheng
` (3 subsequent siblings)
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
Signed-off-by: Fam Zheng <famz@redhat.com>
---
blockdev.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
qapi-schema.json | 1 +
2 files changed, 49 insertions(+)
diff --git a/blockdev.c b/blockdev.c
index b346cc1..7372721 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -1382,6 +1382,49 @@ static void drive_backup_abort(BlkTransactionState *common)
}
}
+typedef struct BlockdevBackupState {
+ BlkTransactionState common;
+ BlockDriverState *bs;
+ BlockJob *job;
+} BlockdevBackupState;
+
+static void blockdev_backup_prepare(BlkTransactionState *common, Error **errp)
+{
+ BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
+ BlockdevBackup *backup;
+ Error *local_err = NULL;
+
+ assert(common->action->kind == TRANSACTION_ACTION_KIND_BLOCKDEV_BACKUP);
+ backup = common->action->blockdev_backup;
+
+ qmp_blockdev_backup(backup->device, backup->target,
+ backup->sync,
+ backup->has_speed, backup->speed,
+ backup->has_on_source_error, backup->on_source_error,
+ backup->has_on_target_error, backup->on_target_error,
+ &local_err);
+ if (error_is_set(&local_err)) {
+ error_propagate(errp, local_err);
+ state->bs = NULL;
+ state->job = NULL;
+ return;
+ }
+
+ state->bs = bdrv_find(backup->device);
+ state->job = state->bs->job;
+}
+
+static void blockdev_backup_abort(BlkTransactionState *common)
+{
+ BlockdevBackupState *state = DO_UPCAST(BlockdevBackupState, common, common);
+ BlockDriverState *bs = state->bs;
+
+ /* Only cancel if it's the job we started */
+ if (bs && bs->job && bs->job == state->job) {
+ block_job_cancel_sync(bs->job);
+ }
+}
+
static void abort_prepare(BlkTransactionState *common, Error **errp)
{
error_setg(errp, "Transaction aborted using Abort action");
@@ -1404,6 +1447,11 @@ static const BdrvActionOps actions[] = {
.prepare = drive_backup_prepare,
.abort = drive_backup_abort,
},
+ [TRANSACTION_ACTION_KIND_BLOCKDEV_BACKUP] = {
+ .instance_size = sizeof(BlockdevBackupState),
+ .prepare = blockdev_backup_prepare,
+ .abort = blockdev_backup_abort,
+ },
[TRANSACTION_ACTION_KIND_ABORT] = {
.instance_size = sizeof(BlkTransactionState),
.prepare = abort_prepare,
diff --git a/qapi-schema.json b/qapi-schema.json
index a92e1be..d22651c 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -1893,6 +1893,7 @@
'data': {
'blockdev-snapshot-sync': 'BlockdevSnapshot',
'drive-backup': 'DriveBackup',
+ 'blockdev-backup': 'BlockdevBackup',
'abort': 'Abort',
'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal'
} }
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Qemu-devel] [PATCH v13 13/14] qemu-iotests: Test blockdev-backup in 055
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (11 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 12/14] block: Add blockdev-backup to transaction Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 14/14] qemu-iotests: Image fleecing test case 081 Fam Zheng
` (2 subsequent siblings)
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
This applies cases on drive-backup on blockdev-backup, except cases with
target format and mode.
Also add a case to check source == target.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
tests/qemu-iotests/055 | 275 ++++++++++++++++++++++++++++++++++++++-------
tests/qemu-iotests/055.out | 4 +-
2 files changed, 235 insertions(+), 44 deletions(-)
diff --git a/tests/qemu-iotests/055 b/tests/qemu-iotests/055
index 451b67d..1fab088 100755
--- a/tests/qemu-iotests/055
+++ b/tests/qemu-iotests/055
@@ -1,6 +1,6 @@
#!/usr/bin/env python
#
-# Tests for drive-backup
+# Tests for drive-backup and blockdev-backup
#
# Copyright (C) 2013 Red Hat, Inc.
#
@@ -27,6 +27,7 @@ from iotests import qemu_img, qemu_io
test_img = os.path.join(iotests.test_dir, 'test.img')
target_img = os.path.join(iotests.test_dir, 'target.img')
+blockdev_target_img = os.path.join(iotests.test_dir, 'blockdev-target.img')
class TestSingleDrive(iotests.QMPTestCase):
image_len = 64 * 1024 * 1024 # MB
@@ -38,34 +39,48 @@ class TestSingleDrive(iotests.QMPTestCase):
qemu_io('-c', 'write -P0xd5 1M 32k', test_img)
qemu_io('-c', 'write -P0xdc 32M 124k', test_img)
qemu_io('-c', 'write -P0xdc 67043328 64k', test_img)
+ qemu_img('create', '-f', iotests.imgfmt, blockdev_target_img, str(TestSingleDrive.image_len))
- self.vm = iotests.VM().add_drive(test_img)
+ self.vm = iotests.VM().add_drive(test_img).add_drive(blockdev_target_img)
self.vm.launch()
def tearDown(self):
self.vm.shutdown()
os.remove(test_img)
+ os.remove(blockdev_target_img)
try:
os.remove(target_img)
except OSError:
pass
- def test_cancel(self):
+ def do_test_cancel(self, test_drive_backup):
self.assert_no_active_block_jobs()
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full')
+ if test_drive_backup:
+ result = self.vm.qmp('drive-backup', device='drive0',
+ target=target_img, sync='full')
+ else:
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='drive1', sync='full')
self.assert_qmp(result, 'return', {})
event = self.cancel_and_wait()
self.assert_qmp(event, 'data/type', 'backup')
- def test_pause(self):
+ def test_cancel(self):
+ self.do_test_cancel(True)
+ self.do_test_cancel(False)
+
+ def do_test_pause(self, test_drive_backup):
self.assert_no_active_block_jobs()
self.vm.pause_drive('drive0')
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full')
+ if test_drive_backup:
+ result = self.vm.qmp('drive-backup', device='drive0',
+ target=target_img, sync='full')
+ else:
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='drive1', sync='full')
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('block-job-pause', device='drive0')
@@ -86,14 +101,28 @@ class TestSingleDrive(iotests.QMPTestCase):
self.wait_until_completed()
self.vm.shutdown()
- self.assertTrue(iotests.compare_images(test_img, target_img),
- 'target image does not match source after backup')
+ if test_drive_backup:
+ self.assertTrue(iotests.compare_images(test_img, target_img),
+ 'target image does not match source after backup')
+ else:
+ self.assertTrue(iotests.compare_images(test_img, blockdev_target_img),
+ 'target image does not match source after backup')
+
+ def test_pause_drive_backup(self):
+ self.do_test_pause(True)
+
+ def test_pause_blockdev_backup(self):
+ self.do_test_pause(False)
def test_medium_not_found(self):
result = self.vm.qmp('drive-backup', device='ide1-cd0',
target=target_img, sync='full')
self.assert_qmp(result, 'error/class', 'GenericError')
+ result = self.vm.qmp('blockdev-backup', device='ide1-cd0',
+ target='drive1', sync='full')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
def test_image_not_found(self):
result = self.vm.qmp('drive-backup', device='drive0',
target=target_img, sync='full', mode='existing')
@@ -110,26 +139,56 @@ class TestSingleDrive(iotests.QMPTestCase):
target=target_img, sync='full')
self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+ result = self.vm.qmp('blockdev-backup', device='nonexistent',
+ target='drive0', sync='full')
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='nonexistent', sync='full')
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ result = self.vm.qmp('blockdev-backup', device='nonexistent',
+ target='nonexistent', sync='full')
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ def test_target_is_source(self):
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='drive0', sync='full')
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
class TestSetSpeed(iotests.QMPTestCase):
image_len = 80 * 1024 * 1024 # MB
def setUp(self):
qemu_img('create', '-f', iotests.imgfmt, test_img, str(TestSetSpeed.image_len))
qemu_io('-c', 'write -P1 0 512', test_img)
- self.vm = iotests.VM().add_drive(test_img)
+ qemu_img('create', '-f', iotests.imgfmt, blockdev_target_img, str(TestSingleDrive.image_len))
+
+ self.vm = iotests.VM().add_drive(test_img).add_drive(blockdev_target_img)
self.vm.launch()
def tearDown(self):
self.vm.shutdown()
os.remove(test_img)
- os.remove(target_img)
+ try:
+ os.remove(blockdev_target_img)
+ except OSError:
+ pass
+ try:
+ os.remove(target_img)
+ except OSError:
+ pass
- def test_set_speed(self):
+ def do_test_set_speed(self, test_drive_backup):
self.assert_no_active_block_jobs()
self.vm.pause_drive('drive0')
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full')
+ if test_drive_backup:
+ result = self.vm.qmp('drive-backup', device='drive0',
+ target=target_img, sync='full')
+ else:
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='drive1', sync='full')
self.assert_qmp(result, 'return', {})
# Default speed is 0
@@ -148,10 +207,14 @@ class TestSetSpeed(iotests.QMPTestCase):
event = self.cancel_and_wait(resume=True)
self.assert_qmp(event, 'data/type', 'backup')
- # Check setting speed in drive-backup works
+ # Check setting speed option works
self.vm.pause_drive('drive0')
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full', speed=4*1024*1024)
+ if test_drive_backup:
+ result = self.vm.qmp('drive-backup', device='drive0',
+ target=target_img, sync='full', speed=4*1024*1024)
+ else:
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='drive1', sync='full', speed=4*1024*1024)
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('query-block-jobs')
@@ -161,18 +224,32 @@ class TestSetSpeed(iotests.QMPTestCase):
event = self.cancel_and_wait(resume=True)
self.assert_qmp(event, 'data/type', 'backup')
- def test_set_speed_invalid(self):
+ def test_set_speed_drive_backup(self):
+ self.do_test_set_speed(True)
+
+ def test_set_speed_blockdev_backup(self):
+ self.do_test_set_speed(False)
+
+ def do_test_set_speed_invalid(self, test_drive_backup):
self.assert_no_active_block_jobs()
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full', speed=-1)
+ if test_drive_backup:
+ result = self.vm.qmp('drive-backup', device='drive0',
+ target=target_img, sync='full', speed=-1)
+ else:
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='drive1', sync='full', speed=-1)
self.assert_qmp(result, 'error/class', 'GenericError')
self.assert_no_active_block_jobs()
self.vm.pause_drive('drive0')
- result = self.vm.qmp('drive-backup', device='drive0',
- target=target_img, sync='full')
+ if test_drive_backup:
+ result = self.vm.qmp('drive-backup', device='drive0',
+ target=target_img, sync='full')
+ else:
+ result = self.vm.qmp('blockdev-backup', device='drive0',
+ target='drive1', sync='full')
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('block-job-set-speed', device='drive0', speed=-1)
@@ -181,6 +258,12 @@ class TestSetSpeed(iotests.QMPTestCase):
event = self.cancel_and_wait(resume=True)
self.assert_qmp(event, 'data/type', 'backup')
+ def test_set_speed_invalid_drive_backup(self):
+ self.do_test_set_speed_invalid(True)
+
+ def test_set_speed_invalid_blockdev_backup(self):
+ self.do_test_set_speed_invalid(False)
+
class TestSingleTransaction(iotests.QMPTestCase):
image_len = 64 * 1024 * 1024 # MB
@@ -190,44 +273,71 @@ class TestSingleTransaction(iotests.QMPTestCase):
qemu_io('-c', 'write -P0xd5 1M 32k', test_img)
qemu_io('-c', 'write -P0xdc 32M 124k', test_img)
qemu_io('-c', 'write -P0xdc 67043328 64k', test_img)
+ qemu_img('create', '-f', iotests.imgfmt, blockdev_target_img, str(TestSingleDrive.image_len))
- self.vm = iotests.VM().add_drive(test_img)
+ self.vm = iotests.VM().add_drive(test_img).add_drive(blockdev_target_img)
self.vm.launch()
def tearDown(self):
self.vm.shutdown()
os.remove(test_img)
+ os.remove(blockdev_target_img)
try:
os.remove(target_img)
except OSError:
pass
- def test_cancel(self):
+ def do_test_cancel(self, test_drive_backup):
self.assert_no_active_block_jobs()
- result = self.vm.qmp('transaction', actions=[{
- 'type': 'drive-backup',
- 'data': { 'device': 'drive0',
- 'target': target_img,
- 'sync': 'full' },
- }
- ])
+ if test_drive_backup:
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'drive-backup',
+ 'data': { 'device': 'drive0',
+ 'target': target_img,
+ 'sync': 'full' },
+ }
+ ])
+ else:
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'drive0',
+ 'target': 'drive1',
+ 'sync': 'full' },
+ }
+ ])
+
self.assert_qmp(result, 'return', {})
event = self.cancel_and_wait()
self.assert_qmp(event, 'data/type', 'backup')
- def test_pause(self):
+ def test_cancel_drive_backup(self):
+ self.do_test_cancel(True)
+
+ def test_cancel_blockdev_backup(self):
+ self.do_test_cancel(False)
+
+ def do_test_pause(self, test_drive_backup):
self.assert_no_active_block_jobs()
self.vm.pause_drive('drive0')
- result = self.vm.qmp('transaction', actions=[{
- 'type': 'drive-backup',
- 'data': { 'device': 'drive0',
- 'target': target_img,
- 'sync': 'full' },
- }
- ])
+ if test_drive_backup:
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'drive-backup',
+ 'data': { 'device': 'drive0',
+ 'target': target_img,
+ 'sync': 'full' },
+ }
+ ])
+ else:
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'drive0',
+ 'target': 'drive1',
+ 'sync': 'full' },
+ }
+ ])
self.assert_qmp(result, 'return', {})
result = self.vm.qmp('block-job-pause', device='drive0')
@@ -248,8 +358,18 @@ class TestSingleTransaction(iotests.QMPTestCase):
self.wait_until_completed()
self.vm.shutdown()
- self.assertTrue(iotests.compare_images(test_img, target_img),
- 'target image does not match source after backup')
+ if test_drive_backup:
+ self.assertTrue(iotests.compare_images(test_img, target_img),
+ 'target image does not match source after backup')
+ else:
+ self.assertTrue(iotests.compare_images(test_img, blockdev_target_img),
+ 'target image does not match source after backup')
+
+ def test_pause_drive_backup(self):
+ self.do_test_pause(True)
+
+ def test_pause_blockdev_backup(self):
+ self.do_test_pause(False)
def test_medium_not_found(self):
result = self.vm.qmp('transaction', actions=[{
@@ -260,6 +380,14 @@ class TestSingleTransaction(iotests.QMPTestCase):
}
])
self.assert_qmp(result, 'error/class', 'GenericError')
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'ide1-cd0',
+ 'target': 'drive1',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'GenericError')
def test_image_not_found(self):
result = self.vm.qmp('transaction', actions=[{
@@ -283,6 +411,43 @@ class TestSingleTransaction(iotests.QMPTestCase):
])
self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'nonexistent',
+ 'target': 'drive1',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'drive0',
+ 'target': 'nonexistent',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'nonexistent',
+ 'target': 'nonexistent',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'DeviceNotFound')
+
+ def test_target_is_source(self):
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'drive0',
+ 'target': 'drive0',
+ 'sync': 'full' },
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'GenericError')
+
def test_abort(self):
result = self.vm.qmp('transaction', actions=[{
'type': 'drive-backup',
@@ -298,5 +463,31 @@ class TestSingleTransaction(iotests.QMPTestCase):
self.assert_qmp(result, 'error/class', 'GenericError')
self.assert_no_active_block_jobs()
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'nonexistent',
+ 'target': 'drive1',
+ 'sync': 'full' },
+ }, {
+ 'type': 'Abort',
+ 'data': {},
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'GenericError')
+ self.assert_no_active_block_jobs()
+
+ result = self.vm.qmp('transaction', actions=[{
+ 'type': 'blockdev-backup',
+ 'data': { 'device': 'drive0',
+ 'target': 'nonexistent',
+ 'sync': 'full' },
+ }, {
+ 'type': 'Abort',
+ 'data': {},
+ }
+ ])
+ self.assert_qmp(result, 'error/class', 'GenericError')
+ self.assert_no_active_block_jobs()
+
if __name__ == '__main__':
iotests.main(supported_fmts=['raw', 'qcow2'])
diff --git a/tests/qemu-iotests/055.out b/tests/qemu-iotests/055.out
index 6323079..c6a10f8 100644
--- a/tests/qemu-iotests/055.out
+++ b/tests/qemu-iotests/055.out
@@ -1,5 +1,5 @@
-..............
+.....................
----------------------------------------------------------------------
-Ran 14 tests
+Ran 21 tests
OK
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Qemu-devel] [PATCH v13 14/14] qemu-iotests: Image fleecing test case 081
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (12 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 13/14] qemu-iotests: Test blockdev-backup in 055 Fam Zheng
@ 2014-01-29 5:07 ` Fam Zheng
2014-02-01 3:00 ` [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Ian Main
2014-02-12 17:22 ` Ian Main
15 siblings, 0 replies; 32+ messages in thread
From: Fam Zheng @ 2014-01-29 5:07 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, rjones, armbru, imain, stefanha, pbonzini
This tests the workflow of creating a lightweight point-in-time snapshot
with blockdev-backup command and export it with built-in NBD server.
It's tested that after the snapshot it created, writing to the original
device doesn't change data that can be read from target with NBD.
Signed-off-by: Fam Zheng <famz@redhat.com>
---
tests/qemu-iotests/081 | 99 ++++++++++++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/081.out | 5 +++
tests/qemu-iotests/group | 1 +
3 files changed, 105 insertions(+)
create mode 100755 tests/qemu-iotests/081
create mode 100644 tests/qemu-iotests/081.out
diff --git a/tests/qemu-iotests/081 b/tests/qemu-iotests/081
new file mode 100755
index 0000000..8be32d7
--- /dev/null
+++ b/tests/qemu-iotests/081
@@ -0,0 +1,99 @@
+#!/usr/bin/env python
+#
+# Tests for image fleecing (point in time snapshot export to NBD)
+#
+# Copyright (C) 2014 Red Hat, Inc.
+#
+# Based on 055.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+import time
+import os
+import iotests
+from iotests import qemu_img, qemu_io
+
+test_img = os.path.join(iotests.test_dir, 'test.img')
+target_img = os.path.join(iotests.test_dir, 'target.img')
+nbd_sock = os.path.join(iotests.test_dir, 'nbd.sock')
+
+class TestImageFleecing(iotests.QMPTestCase):
+ image_len = 64 * 1024 * 1024 # MB
+
+ def setUp(self):
+ # Write data to the image so we can compare later
+ qemu_img('create', '-f', iotests.imgfmt, test_img, str(TestImageFleecing.image_len))
+ self.patterns = [
+ ("0x5d", "0", "64k"),
+ ("0xd5", "1M", "64k"),
+ ("0xdc", "32M", "64k"),
+ ("0xdc", "67043328", "64k")]
+
+ for p in self.patterns:
+ qemu_io('-c', 'write -P%s %s %s' % p, test_img)
+
+ qemu_img('create', '-f', iotests.imgfmt, target_img, str(TestImageFleecing.image_len))
+
+ self.vm = iotests.VM().add_drive(test_img)
+ self.vm.launch()
+
+ self.overwrite_patterns = [
+ ("0xa0", "0", "64k"),
+ ("0x0a", "1M", "64k"),
+ ("0x55", "32M", "64k"),
+ ("0x56", "67043328", "64k")]
+
+ self.nbd_uri = "nbd+unix:///drive1?socket=%s" % nbd_sock
+
+ def tearDown(self):
+ self.vm.shutdown()
+ os.remove(test_img)
+ os.remove(target_img)
+
+ def verify_patterns(self):
+ for p in self.patterns:
+ self.assertEqual(-1, qemu_io(self.nbd_uri, '-c', 'read -P%s %s %s' % p).find("verification failed"),
+ "Failed to verify pattern: %s %s %s" % p)
+
+ def test_image_fleecing(self):
+ result = self.vm.qmp("blockdev-add", **{"options": {
+ "driver": "qcow2",
+ "id": "drive1",
+ "file": {
+ "driver": "file",
+ "filename": target_img,
+ },
+ "backing": "drive0",
+ }})
+ self.assert_qmp(result, 'return', {})
+ result = self.vm.qmp("nbd-server-start", **{"addr": { "type": "unix", "data": { "path": nbd_sock } } })
+ self.assert_qmp(result, 'return', {})
+ result = self.vm.qmp("blockdev-backup", device="drive0", target="drive1", sync="none")
+ self.assert_qmp(result, 'return', {})
+ result = self.vm.qmp("nbd-server-add", device="drive1")
+ self.assert_qmp(result, 'return', {})
+
+ self.verify_patterns()
+
+ for p in self.overwrite_patterns:
+ self.vm.hmp_qemu_io("drive0", "write -P%s %s %s" % p)
+
+ self.verify_patterns()
+
+ self.cancel_and_wait(resume=True)
+ self.assert_no_active_block_jobs()
+
+if __name__ == '__main__':
+ iotests.main(supported_fmts=['raw', 'qcow2'])
diff --git a/tests/qemu-iotests/081.out b/tests/qemu-iotests/081.out
new file mode 100644
index 0000000..ae1213e
--- /dev/null
+++ b/tests/qemu-iotests/081.out
@@ -0,0 +1,5 @@
+.
+----------------------------------------------------------------------
+Ran 1 tests
+
+OK
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index 03c762f..b27072d 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -82,3 +82,4 @@
073 rw auto
074 rw auto
077 rw auto
+081 rw auto
--
1.8.5.3
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (13 preceding siblings ...)
2014-01-29 5:07 ` [Qemu-devel] [PATCH v13 14/14] qemu-iotests: Image fleecing test case 081 Fam Zheng
@ 2014-02-01 3:00 ` Ian Main
2014-02-01 15:21 ` Fam Zheng
2014-02-12 17:22 ` Ian Main
15 siblings, 1 reply; 32+ messages in thread
From: Ian Main @ 2014-02-01 3:00 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, armbru, qemu-devel, rjones, stefanha, pbonzini
On Wed, Jan 29, 2014 at 01:07:27PM +0800, Fam Zheng wrote:
> This series adds for point-in-time snapshot NBD exporting based on
> blockdev-backup (variant of drive-backup with existing device as target).
>
> We get a thin point-in-time snapshot by COW mechanism of drive-backup, and
> export it through built in NBD server. The steps are as below:
>
> 1. (SHELL) qemu-img create -f qcow2 BACKUP.qcow2 <source size here>
>
> (Alternatively we can use -o backing_file=RUNNING-VM.img to omit explicitly
> providing the size by ourselves, but it's risky because RUNNING-VM.qcow2 is
> used r/w by guest. Whether or not setting backing file in the image file
> doesn't matter, as we are going to override the backing hd in the next
> step)
>
> 2. (QMP) blockdev-add backing=source-drive file.driver=file file.filename=BACKUP.qcow2 id=target0 if=none driver=qcow2
It seems like we have a regression here. I sent you a private email
earlier and after some more testing I am finding that the setup that I
had to test this before is no longer working. Now when I try to use
blockdev-add I get:
rsp = srv.cmd(command, {'options': {
'backing': 'ide0-hd0',
'driver': 'qcow2',
'id': 'target0',
'file': {
'driver': 'file',
'filename': '/home/imain/tmp/BACKUP.qcow2'
}
}
})
rsp is {u'error': {u'class': u'GenericError', u'desc': u"could not open
disk image target0: Block format 'qcow2' used by device 'target0'
doesn't support the option 'backing'"}}
It's possible I'm messing something up but I'm pretty sure something has
changed with the options handling in bdrv_open() to make this not work
anymore.
Thanks!
Ian
> (where source-drive is the running BlockDriverState name for
> RUNNING-VM.img. This patch implements "backing=" option to override
> backing_hd for added drive)
>
> 3. (QMP) blockdev-backup device=source-drive sync=none target=target0
>
> (this is the QMP command introduced by this series, which use a named
> device as target of drive-backup)
>
> 4. (QMP) nbd-server-add device=target0
>
> When image fleecing done:
>
> 1. (QMP) block-job-cancel device=source-drive
>
> 2. (HMP) drive_del target0
>
> 3. (SHELL) rm BACKUP.qcow2
>
> v12 -> v13: Address comments from Stefan.
>
> [05/15] block: Add bdrv_set_backing_hd()
> Remove duplicated assignments.
>
> [10/15] qmp: Add command 'blockdev-backup'
> Add check for source == target.
>
> [13/15] block: Add blockdev-backup to transaction
> New.
>
> [14/15] qemu-iotests: Test blockdev-backup in 055
> New.
>
> [15/15] qemu-iotests: Image fleecing test case 081
> New. Hope this number has no conflict. I have a 080 on my
> iothrottling test branch.
>
> v11 -> v12: Rebase to qemu.git.
> Call bdrv_refresh_limits() in bdrv_set_backing_hd().
>
>
>
> Fam Zheng (14):
> block: Add BlockOpType enum
> block: Introduce op_blockers to BlockDriverState
> block: Replace in_use with operation blocker
> block: Move op_blocker check from block_job_create to its caller
> block: Add bdrv_set_backing_hd()
> block: Add backing_blocker in BlockDriverState
> block: Parse "backing" option to reference existing BDS
> block: Support dropping active in bdrv_drop_intermediate
> stream: Use bdrv_drop_intermediate and drop close_unused_images
> qmp: Add command 'blockdev-backup'
> block: Allow backup on referenced named BlockDriverState
> block: Add blockdev-backup to transaction
> qemu-iotests: Test blockdev-backup in 055
> qemu-iotests: Image fleecing test case 081
>
> block-migration.c | 7 +-
> block.c | 306 ++++++++++++++++++++++++++--------------
> block/backup.c | 26 ++++
> block/commit.c | 1 +
> block/stream.c | 30 +---
> blockdev.c | 118 ++++++++++++++--
> blockjob.c | 14 +-
> hw/block/dataplane/virtio-blk.c | 19 ++-
> include/block/block.h | 29 +++-
> include/block/block_int.h | 9 +-
> include/block/blockjob.h | 3 +
> qapi-schema.json | 50 +++++++
> qmp-commands.hx | 44 ++++++
> tests/qemu-iotests/055 | 275 ++++++++++++++++++++++++++++++------
> tests/qemu-iotests/055.out | 4 +-
> tests/qemu-iotests/081 | 99 +++++++++++++
> tests/qemu-iotests/081.out | 5 +
> tests/qemu-iotests/group | 1 +
> 18 files changed, 836 insertions(+), 204 deletions(-)
> create mode 100755 tests/qemu-iotests/081
> create mode 100644 tests/qemu-iotests/081.out
>
> --
> 1.8.5.3
>
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD
2014-02-01 3:00 ` [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Ian Main
@ 2014-02-01 15:21 ` Fam Zheng
2014-02-02 1:13 ` Ian Main
0 siblings, 1 reply; 32+ messages in thread
From: Fam Zheng @ 2014-02-01 15:21 UTC (permalink / raw)
To: Ian Main; +Cc: kwolf, armbru, qemu-devel, rjones, stefanha, pbonzini
On Fri, 01/31 19:00, Ian Main wrote:
> On Wed, Jan 29, 2014 at 01:07:27PM +0800, Fam Zheng wrote:
> > This series adds for point-in-time snapshot NBD exporting based on
> > blockdev-backup (variant of drive-backup with existing device as target).
> >
> > We get a thin point-in-time snapshot by COW mechanism of drive-backup, and
> > export it through built in NBD server. The steps are as below:
> >
> > 1. (SHELL) qemu-img create -f qcow2 BACKUP.qcow2 <source size here>
> >
> > (Alternatively we can use -o backing_file=RUNNING-VM.img to omit explicitly
> > providing the size by ourselves, but it's risky because RUNNING-VM.qcow2 is
> > used r/w by guest. Whether or not setting backing file in the image file
> > doesn't matter, as we are going to override the backing hd in the next
> > step)
> >
> > 2. (QMP) blockdev-add backing=source-drive file.driver=file file.filename=BACKUP.qcow2 id=target0 if=none driver=qcow2
>
> It seems like we have a regression here. I sent you a private email
> earlier and after some more testing I am finding that the setup that I
> had to test this before is no longer working. Now when I try to use
> blockdev-add I get:
>
> rsp = srv.cmd(command, {'options': {
> 'backing': 'ide0-hd0',
> 'driver': 'qcow2',
> 'id': 'target0',
> 'file': {
> 'driver': 'file',
> 'filename': '/home/imain/tmp/BACKUP.qcow2'
> }
> }
> })
>
> rsp is {u'error': {u'class': u'GenericError', u'desc': u"could not open
> disk image target0: Block format 'qcow2' used by device 'target0'
> doesn't support the option 'backing'"}}
>
> It's possible I'm messing something up but I'm pretty sure something has
> changed with the options handling in bdrv_open() to make this not work
> anymore.
>
My local test script is very similar to this, so as the case added in this
series. They both work here. Have you found what is wrong there yet?
Fam
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD
2014-02-01 15:21 ` Fam Zheng
@ 2014-02-02 1:13 ` Ian Main
0 siblings, 0 replies; 32+ messages in thread
From: Ian Main @ 2014-02-02 1:13 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, armbru, qemu-devel, rjones, stefanha, pbonzini
On Sat, Feb 01, 2014 at 11:21:17PM +0800, Fam Zheng wrote:
> On Fri, 01/31 19:00, Ian Main wrote:
> > On Wed, Jan 29, 2014 at 01:07:27PM +0800, Fam Zheng wrote:
> > > This series adds for point-in-time snapshot NBD exporting based on
> > > blockdev-backup (variant of drive-backup with existing device as target).
> > >
> > > We get a thin point-in-time snapshot by COW mechanism of drive-backup, and
> > > export it through built in NBD server. The steps are as below:
> > >
> > > 1. (SHELL) qemu-img create -f qcow2 BACKUP.qcow2 <source size here>
> > >
> > > (Alternatively we can use -o backing_file=RUNNING-VM.img to omit explicitly
> > > providing the size by ourselves, but it's risky because RUNNING-VM.qcow2 is
> > > used r/w by guest. Whether or not setting backing file in the image file
> > > doesn't matter, as we are going to override the backing hd in the next
> > > step)
> > >
> > > 2. (QMP) blockdev-add backing=source-drive file.driver=file file.filename=BACKUP.qcow2 id=target0 if=none driver=qcow2
> >
> > It seems like we have a regression here. I sent you a private email
> > earlier and after some more testing I am finding that the setup that I
> > had to test this before is no longer working. Now when I try to use
> > blockdev-add I get:
> >
> > rsp = srv.cmd(command, {'options': {
> > 'backing': 'ide0-hd0',
> > 'driver': 'qcow2',
> > 'id': 'target0',
> > 'file': {
> > 'driver': 'file',
> > 'filename': '/home/imain/tmp/BACKUP.qcow2'
> > }
> > }
> > })
> >
> > rsp is {u'error': {u'class': u'GenericError', u'desc': u"could not open
> > disk image target0: Block format 'qcow2' used by device 'target0'
> > doesn't support the option 'backing'"}}
> >
> > It's possible I'm messing something up but I'm pretty sure something has
> > changed with the options handling in bdrv_open() to make this not work
> > anymore.
> >
>
> My local test script is very similar to this, so as the case added in this
> series. They both work here. Have you found what is wrong there yet?
Hrrm, so I cleaned up my tree, pulled to latest and applied these and it
worked. Not sure what happened there but it all seems good now. I
should have tried that before I posted.
Ian
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD
2014-01-29 5:07 [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Fam Zheng
` (14 preceding siblings ...)
2014-02-01 3:00 ` [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD Ian Main
@ 2014-02-12 17:22 ` Ian Main
2014-02-12 18:27 ` Richard W.M. Jones
15 siblings, 1 reply; 32+ messages in thread
From: Ian Main @ 2014-02-12 17:22 UTC (permalink / raw)
To: Fam Zheng; +Cc: kwolf, armbru, qemu-devel, rjones, stefanha, pbonzini
On Wed, Jan 29, 2014 at 01:07:27PM +0800, Fam Zheng wrote:
> This series adds for point-in-time snapshot NBD exporting based on
> blockdev-backup (variant of drive-backup with existing device as target).
>
> We get a thin point-in-time snapshot by COW mechanism of drive-backup, and
> export it through built in NBD server. The steps are as below:
>
> 1. (SHELL) qemu-img create -f qcow2 BACKUP.qcow2 <source size here>
>
> (Alternatively we can use -o backing_file=RUNNING-VM.img to omit explicitly
> providing the size by ourselves, but it's risky because RUNNING-VM.qcow2 is
> used r/w by guest. Whether or not setting backing file in the image file
> doesn't matter, as we are going to override the backing hd in the next
> step)
>
> 2. (QMP) blockdev-add backing=source-drive file.driver=file file.filename=BACKUP.qcow2 id=target0 if=none driver=qcow2
>
> (where source-drive is the running BlockDriverState name for
> RUNNING-VM.img. This patch implements "backing=" option to override
> backing_hd for added drive)
>
> 3. (QMP) blockdev-backup device=source-drive sync=none target=target0
>
> (this is the QMP command introduced by this series, which use a named
> device as target of drive-backup)
>
> 4. (QMP) nbd-server-add device=target0
>
> When image fleecing done:
>
> 1. (QMP) block-job-cancel device=source-drive
>
> 2. (HMP) drive_del target0
>
> 3. (SHELL) rm BACKUP.qcow2
>
> v12 -> v13: Address comments from Stefan.
>
> [05/15] block: Add bdrv_set_backing_hd()
> Remove duplicated assignments.
>
> [10/15] qmp: Add command 'blockdev-backup'
> Add check for source == target.
>
> [13/15] block: Add blockdev-backup to transaction
> New.
>
> [14/15] qemu-iotests: Test blockdev-backup in 055
> New.
>
> [15/15] qemu-iotests: Image fleecing test case 081
> New. Hope this number has no conflict. I have a 080 on my
> iothrottling test branch.
>
> v11 -> v12: Rebase to qemu.git.
> Call bdrv_refresh_limits() in bdrv_set_backing_hd().
I've been using this patch and testing it for the last few weeks and it
all seems to be working very well. Kevin is waiting on more reviewers for
this rev before it can go in. Can someone else look through this please?
Tested-by: Ian Main <imain@redhat.com>
>
>
> Fam Zheng (14):
> block: Add BlockOpType enum
> block: Introduce op_blockers to BlockDriverState
> block: Replace in_use with operation blocker
> block: Move op_blocker check from block_job_create to its caller
> block: Add bdrv_set_backing_hd()
> block: Add backing_blocker in BlockDriverState
> block: Parse "backing" option to reference existing BDS
> block: Support dropping active in bdrv_drop_intermediate
> stream: Use bdrv_drop_intermediate and drop close_unused_images
> qmp: Add command 'blockdev-backup'
> block: Allow backup on referenced named BlockDriverState
> block: Add blockdev-backup to transaction
> qemu-iotests: Test blockdev-backup in 055
> qemu-iotests: Image fleecing test case 081
>
> block-migration.c | 7 +-
> block.c | 306 ++++++++++++++++++++++++++--------------
> block/backup.c | 26 ++++
> block/commit.c | 1 +
> block/stream.c | 30 +---
> blockdev.c | 118 ++++++++++++++--
> blockjob.c | 14 +-
> hw/block/dataplane/virtio-blk.c | 19 ++-
> include/block/block.h | 29 +++-
> include/block/block_int.h | 9 +-
> include/block/blockjob.h | 3 +
> qapi-schema.json | 50 +++++++
> qmp-commands.hx | 44 ++++++
> tests/qemu-iotests/055 | 275 ++++++++++++++++++++++++++++++------
> tests/qemu-iotests/055.out | 4 +-
> tests/qemu-iotests/081 | 99 +++++++++++++
> tests/qemu-iotests/081.out | 5 +
> tests/qemu-iotests/group | 1 +
> 18 files changed, 836 insertions(+), 204 deletions(-)
> create mode 100755 tests/qemu-iotests/081
> create mode 100644 tests/qemu-iotests/081.out
>
> --
> 1.8.5.3
>
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Qemu-devel] [PATCH v13 00/14] Drop in_use from BlockDriverState and enable point-in-time snapshot exporting over NBD
2014-02-12 17:22 ` Ian Main
@ 2014-02-12 18:27 ` Richard W.M. Jones
0 siblings, 0 replies; 32+ messages in thread
From: Richard W.M. Jones @ 2014-02-12 18:27 UTC (permalink / raw)
To: Ian Main, ptoscano
Cc: kwolf, Fam Zheng, qemu-devel, armbru, stefanha, pbonzini
On Wed, Feb 12, 2014 at 09:22:29AM -0800, Ian Main wrote:
> On Wed, Jan 29, 2014 at 01:07:27PM +0800, Fam Zheng wrote:
> > This series adds for point-in-time snapshot NBD exporting based on
> > blockdev-backup (variant of drive-backup with existing device as target).
> >
> > We get a thin point-in-time snapshot by COW mechanism of drive-backup, and
> > export it through built in NBD server. The steps are as below:
> >
> > 1. (SHELL) qemu-img create -f qcow2 BACKUP.qcow2 <source size here>
> >
> > (Alternatively we can use -o backing_file=RUNNING-VM.img to omit explicitly
> > providing the size by ourselves, but it's risky because RUNNING-VM.qcow2 is
> > used r/w by guest. Whether or not setting backing file in the image file
> > doesn't matter, as we are going to override the backing hd in the next
> > step)
> >
> > 2. (QMP) blockdev-add backing=source-drive file.driver=file file.filename=BACKUP.qcow2 id=target0 if=none driver=qcow2
> >
> > (where source-drive is the running BlockDriverState name for
> > RUNNING-VM.img. This patch implements "backing=" option to override
> > backing_hd for added drive)
> >
> > 3. (QMP) blockdev-backup device=source-drive sync=none target=target0
> >
> > (this is the QMP command introduced by this series, which use a named
> > device as target of drive-backup)
> >
> > 4. (QMP) nbd-server-add device=target0
> >
> > When image fleecing done:
> >
> > 1. (QMP) block-job-cancel device=source-drive
> >
> > 2. (HMP) drive_del target0
> >
> > 3. (SHELL) rm BACKUP.qcow2
> >
> > v12 -> v13: Address comments from Stefan.
> >
> > [05/15] block: Add bdrv_set_backing_hd()
> > Remove duplicated assignments.
> >
> > [10/15] qmp: Add command 'blockdev-backup'
> > Add check for source == target.
> >
> > [13/15] block: Add blockdev-backup to transaction
> > New.
> >
> > [14/15] qemu-iotests: Test blockdev-backup in 055
> > New.
> >
> > [15/15] qemu-iotests: Image fleecing test case 081
> > New. Hope this number has no conflict. I have a 080 on my
> > iothrottling test branch.
> >
> > v11 -> v12: Rebase to qemu.git.
> > Call bdrv_refresh_limits() in bdrv_set_backing_hd().
>
> I've been using this patch and testing it for the last few weeks and it
> all seems to be working very well. Kevin is waiting on more reviewers for
> this rev before it can go in. Can someone else look through this please?
>
> Tested-by: Ian Main <imain@redhat.com>
Adding Pino Toscano to this thread, since he is working on libguestfs.
Pino, I believe the latest patch series is this:
https://lists.gnu.org/archive/html/qemu-devel/2014-01/threads.html#03904
Rich.
> > Fam Zheng (14):
> > block: Add BlockOpType enum
> > block: Introduce op_blockers to BlockDriverState
> > block: Replace in_use with operation blocker
> > block: Move op_blocker check from block_job_create to its caller
> > block: Add bdrv_set_backing_hd()
> > block: Add backing_blocker in BlockDriverState
> > block: Parse "backing" option to reference existing BDS
> > block: Support dropping active in bdrv_drop_intermediate
> > stream: Use bdrv_drop_intermediate and drop close_unused_images
> > qmp: Add command 'blockdev-backup'
> > block: Allow backup on referenced named BlockDriverState
> > block: Add blockdev-backup to transaction
> > qemu-iotests: Test blockdev-backup in 055
> > qemu-iotests: Image fleecing test case 081
> >
> > block-migration.c | 7 +-
> > block.c | 306 ++++++++++++++++++++++++++--------------
> > block/backup.c | 26 ++++
> > block/commit.c | 1 +
> > block/stream.c | 30 +---
> > blockdev.c | 118 ++++++++++++++--
> > blockjob.c | 14 +-
> > hw/block/dataplane/virtio-blk.c | 19 ++-
> > include/block/block.h | 29 +++-
> > include/block/block_int.h | 9 +-
> > include/block/blockjob.h | 3 +
> > qapi-schema.json | 50 +++++++
> > qmp-commands.hx | 44 ++++++
> > tests/qemu-iotests/055 | 275 ++++++++++++++++++++++++++++++------
> > tests/qemu-iotests/055.out | 4 +-
> > tests/qemu-iotests/081 | 99 +++++++++++++
> > tests/qemu-iotests/081.out | 5 +
> > tests/qemu-iotests/group | 1 +
> > 18 files changed, 836 insertions(+), 204 deletions(-)
> > create mode 100755 tests/qemu-iotests/081
> > create mode 100644 tests/qemu-iotests/081.out
> >
> > --
> > 1.8.5.3
> >
--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Fedora Windows cross-compiler. Compile Windows programs, test, and
build Windows installers. Over 100 libraries supported.
http://fedoraproject.org/wiki/MinGW
^ permalink raw reply [flat|nested] 32+ messages in thread