Re: [Qemu-devel] [PATCH 2/7] allwinner-a10-pic: fix interrupt clear behaviour

[Beniamino Galvani <b.galvani@gmail.com>]

On Tue, Feb 18, 2014 at 11:49:51AM +0800, Li Guang wrote:
> Beniamino Galvani wrote:
> >According to this mail thread [1], writing to pending register seems
> >to have no effect on actual pending status of interrupts. This means
> >that the only way to clear a pending interrupt is to clear the
> >interrupt source. This patch implements such behaviour.
> >
> >[1] http://lkml.org/lkml/2013/7/6/59
> >
> >Signed-off-by: Beniamino Galvani<b.galvani@gmail.com>
> >---
> >  hw/intc/allwinner-a10-pic.c |    6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> >
> >diff --git a/hw/intc/allwinner-a10-pic.c b/hw/intc/allwinner-a10-pic.c
> >index bb2351f..afd57ef 100644
> >--- a/hw/intc/allwinner-a10-pic.c
> >+++ b/hw/intc/allwinner-a10-pic.c
> >@@ -49,6 +49,8 @@ static void aw_a10_pic_set_irq(void *opaque, int irq, int level)
> >
> >      if (level) {
> >          set_bit(irq % 32, (void *)&s->irq_pending[irq / 32]);
> >+    } else {
> >+        clear_bit(irq % 32, (void *)&s->irq_pending[irq / 32]);
> >      }
> >      aw_a10_pic_update(s);
> >  }
> >@@ -105,10 +107,10 @@ static void aw_a10_pic_write(void *opaque, hwaddr offset, uint64_t value,
> >          s->nmi = value;
> >          break;
> >      case AW_A10_PIC_IRQ_PENDING ... AW_A10_PIC_IRQ_PENDING + 8:
> >-        s->irq_pending[index]&= ~value;
> >+        /* Nothing to do */
> >          break;
> >      case AW_A10_PIC_FIQ_PENDING ... AW_A10_PIC_FIQ_PENDING + 8:
> >-        s->fiq_pending[index]&= ~value;
> >+        /* Ditto */
> >          break;
> >      case AW_A10_PIC_SELECT ... AW_A10_PIC_SELECT + 8:
> >          s->select[index] = value;
> 
> pending registers are also clear registers by a10 datasheet,
> also you found bits are marked as 'R', so, ..., contradict itself.

Yes, the datasheet is inconsistent about this because the register
can't be read-only and 'clear' at the same time.

Unfortunately at the moment I cannot test if the clearing
functionality of the pending register works on real hardware but the
idea I got from the linked discussion is that it's either not
implemented or broken and therefore interrupts remain pending until
they are disabled at the source.

Do you have a chance to try it on a real board?

Beniamino