qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Dmitry Fleytman <dmitry@daynix.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>,
	qemu-devel@nongnu.org, mdroth@linux.vnet.ibm.com,
	qemu-stable@nongnu.org, Stefan Hajnoczi <stefanha@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: Re: [Qemu-devel] [PATCH V2 1/4] vmxnet3: validate interrupt indices coming from guest
Date: Fri, 11 Apr 2014 15:05:59 +0100	[thread overview]
Message-ID: <20140411140559.GI2430@work-vm> (raw)
In-Reply-To: <1396604722-11902-2-git-send-email-dmitry@daynix.com>

* Dmitry Fleytman (dmitry@daynix.com) wrote:
> CVE-2013-4544
> 
> Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
> Reported-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

> ---
>  hw/net/vmxnet3.c | 36 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 34 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/net/vmxnet3.c b/hw/net/vmxnet3.c
> index 5be807c..0b317f8 100644
> --- a/hw/net/vmxnet3.c
> +++ b/hw/net/vmxnet3.c
> @@ -52,6 +52,9 @@
>  #define VMXNET3_DEVICE_VERSION    0x1
>  #define VMXNET3_DEVICE_REVISION   0x1
>  
> +/* Number of interrupt vectors for non-MSIx modes */
> +#define VMXNET3_MAX_NMSIX_INTRS   (1)
> +
>  /* Macros for rings descriptors access */
>  #define VMXNET3_READ_TX_QUEUE_DESCR8(dpa, field) \
>      (vmw_shmem_ld8(dpa + offsetof(struct Vmxnet3_TxQueueDesc, field)))
> @@ -1305,6 +1308,34 @@ static bool vmxnet3_verify_intx(VMXNET3State *s, int intx)
>             (pci_get_byte(s->parent_obj.config + PCI_INTERRUPT_PIN) - 1));
>  }
>  
> +static void vmxnet3_validate_interrupt_idx(bool is_msix, int idx)
> +{
> +    int max_ints = is_msix ? VMXNET3_MAX_INTRS : VMXNET3_MAX_NMSIX_INTRS;
> +    if (idx >= max_ints) {
> +        hw_error("Bad interrupt index: %d\n", idx);
> +    }
> +}
> +
> +static void vmxnet3_validate_interrupts(VMXNET3State *s)
> +{
> +    int i;
> +
> +    VMW_CFPRN("Verifying event interrupt index (%d)", s->event_int_idx);
> +    vmxnet3_validate_interrupt_idx(s->msix_used, s->event_int_idx);
> +
> +    for (i = 0; i < s->txq_num; i++) {
> +        int idx = s->txq_descr[i].intr_idx;
> +        VMW_CFPRN("Verifying TX queue %d interrupt index (%d)", i, idx);
> +        vmxnet3_validate_interrupt_idx(s->msix_used, idx);
> +    }
> +
> +    for (i = 0; i < s->rxq_num; i++) {
> +        int idx = s->rxq_descr[i].intr_idx;
> +        VMW_CFPRN("Verifying RX queue %d interrupt index (%d)", i, idx);
> +        vmxnet3_validate_interrupt_idx(s->msix_used, idx);
> +    }
> +}
> +
>  static void vmxnet3_activate_device(VMXNET3State *s)
>  {
>      int i;
> @@ -1447,6 +1478,8 @@ static void vmxnet3_activate_device(VMXNET3State *s)
>                 sizeof(s->rxq_descr[i].rxq_stats));
>      }
>  
> +    vmxnet3_validate_interrupts(s);
> +
>      /* Make sure everything is in place before device activation */
>      smp_wmb();
>  
> @@ -2005,7 +2038,6 @@ vmxnet3_cleanup_msix(VMXNET3State *s)
>      }
>  }
>  
> -#define VMXNET3_MSI_NUM_VECTORS   (1)
>  #define VMXNET3_MSI_OFFSET        (0x50)
>  #define VMXNET3_USE_64BIT         (true)
>  #define VMXNET3_PER_VECTOR_MASK   (false)
> @@ -2016,7 +2048,7 @@ vmxnet3_init_msi(VMXNET3State *s)
>      PCIDevice *d = PCI_DEVICE(s);
>      int res;
>  
> -    res = msi_init(d, VMXNET3_MSI_OFFSET, VMXNET3_MSI_NUM_VECTORS,
> +    res = msi_init(d, VMXNET3_MSI_OFFSET, VMXNET3_MAX_NMSIX_INTRS,
>                     VMXNET3_USE_64BIT, VMXNET3_PER_VECTOR_MASK);
>      if (0 > res) {
>          VMW_WRPRN("Failed to initialize MSI, error %d", res);
> -- 
> 1.8.5.3
> 
> 
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK

  reply	other threads:[~2014-04-11 14:06 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-04  9:45 [Qemu-devel] [PATCH V2 0/4] CVE-2013-4544 Dmitry Fleytman
2014-04-04  9:45 ` [Qemu-devel] [PATCH V2 1/4] vmxnet3: validate interrupt indices coming from guest Dmitry Fleytman
2014-04-11 14:05   ` Dr. David Alan Gilbert [this message]
2014-04-04  9:45 ` [Qemu-devel] [PATCH V2 2/4] vmxnet3: validate queues configuration coming from quest Dmitry Fleytman
2014-04-11 14:10   ` Dr. David Alan Gilbert
2014-04-04  9:45 ` [Qemu-devel] [PATCH V2 3/4] vmxnet3: validate interrupt indices read on migration Dmitry Fleytman
2014-04-11 14:21   ` Dr. David Alan Gilbert
2014-04-04  9:45 ` [Qemu-devel] [PATCH V2 4/4] vmxnet3: validate queues configuration " Dmitry Fleytman
2014-04-11 14:23   ` Dr. David Alan Gilbert
2014-04-11 14:26 ` [Qemu-devel] [PATCH V2 0/4] CVE-2013-4544 Dr. David Alan Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140411140559.GI2430@work-vm \
    --to=dgilbert@redhat.com \
    --cc=dmitry@daynix.com \
    --cc=mdroth@linux.vnet.ibm.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-stable@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).