* [Qemu-devel] [PATCH] Makefile: strip tools and modules too
@ 2014-05-08 10:56 Michael Tokarev
2014-05-08 12:39 ` Fam Zheng
0 siblings, 1 reply; 2+ messages in thread
From: Michael Tokarev @ 2014-05-08 10:56 UTC (permalink / raw)
To: qemu-devel; +Cc: Fam Zheng, Paolo Bonzini, Michael Tokarev, Hollis Blanchard
Commit 52ba784d3 replaced $(STRIP_OPT) with $(STRIP) in some
places (for example, Makefile.target), but not all of them.
There are a few places remain in main Makefile which still
uses $(STRIP_OPT). Replace these places with $(STRIP) too.
While at it, simplify variable pattern substitution of the
surrounding places, change $(patsubst pat,rep,$(var)) into
$(var:pat=rep) which is much easier to read (this is probably
a good idea to do everywhere).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
---
Makefile | 16 ++++++++++++----
Makefile.target | 2 +-
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/Makefile b/Makefile
index 423e373..23ca444 100644
--- a/Makefile
+++ b/Makefile
@@ -372,17 +372,25 @@ install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig \
install-datadir install-localstatedir
$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
- $(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
+ $(INSTALL_PROG) $(TOOLS) "$(DESTDIR)$(bindir)"
+ifneq ($(STRIP),)
+ $(STRIP) $(TOOLS:%="$(DESTDIR)$(bindir)/%")
+endif
endif
ifneq ($(CONFIG_MODULES),)
$(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
- for s in $(patsubst %.mo,%$(DSOSUF),$(modules-m)); do \
- $(INSTALL_PROG) $(STRIP_OPT) $$s "$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
+ for s in $(modules-m:.mo=$(DSOSUF)); do \
+ t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
+ $(INSTALL_PROG) $$s "$$t"; \
+ test -z "$(STRIP)" || $(STRIP) "$$t"; \
done
endif
ifneq ($(HELPERS-y),)
$(INSTALL_DIR) "$(DESTDIR)$(libexecdir)"
- $(INSTALL_PROG) $(STRIP_OPT) $(HELPERS-y) "$(DESTDIR)$(libexecdir)"
+ $(INSTALL_PROG) $(HELPERS-y) "$(DESTDIR)$(libexecdir)"
+ifneq ($(STRIP),)
+ $(STRIP) $(HELPERS-y:%="$(DESTDIR)$(libexecdir)/%")
+endif
endif
ifneq ($(BLOBS),)
set -e; for x in $(BLOBS); do \
diff --git a/Makefile.target b/Makefile.target
index 6d8fde8..8de8b12 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -196,7 +196,7 @@ install: all
ifneq ($(PROGS),)
$(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
ifneq ($(STRIP),)
- $(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
+ $(STRIP) $(PROGS:%="$(DESTDIR)$(bindir)/%")
endif
endif
ifdef CONFIG_TRACE_SYSTEMTAP
--
1.7.10.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [Qemu-devel] [PATCH] Makefile: strip tools and modules too
2014-05-08 10:56 [Qemu-devel] [PATCH] Makefile: strip tools and modules too Michael Tokarev
@ 2014-05-08 12:39 ` Fam Zheng
0 siblings, 0 replies; 2+ messages in thread
From: Fam Zheng @ 2014-05-08 12:39 UTC (permalink / raw)
To: Michael Tokarev; +Cc: Paolo Bonzini, qemu-devel, Hollis Blanchard
On Thu, 05/08 14:56, Michael Tokarev wrote:
> Commit 52ba784d3 replaced $(STRIP_OPT) with $(STRIP) in some
> places (for example, Makefile.target), but not all of them.
> There are a few places remain in main Makefile which still
> uses $(STRIP_OPT). Replace these places with $(STRIP) too.
>
> While at it, simplify variable pattern substitution of the
> surrounding places, change $(patsubst pat,rep,$(var)) into
> $(var:pat=rep) which is much easier to read (this is probably
> a good idea to do everywhere).
>
> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
> Cc: Fam Zheng <famz@redhat.com>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
> ---
> Makefile | 16 ++++++++++++----
> Makefile.target | 2 +-
> 2 files changed, 13 insertions(+), 5 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index 423e373..23ca444 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -372,17 +372,25 @@ install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig \
> install-datadir install-localstatedir
> $(INSTALL_DIR) "$(DESTDIR)$(bindir)"
> ifneq ($(TOOLS),)
> - $(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
> + $(INSTALL_PROG) $(TOOLS) "$(DESTDIR)$(bindir)"
> +ifneq ($(STRIP),)
> + $(STRIP) $(TOOLS:%="$(DESTDIR)$(bindir)/%")
> +endif
> endif
> ifneq ($(CONFIG_MODULES),)
> $(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
> - for s in $(patsubst %.mo,%$(DSOSUF),$(modules-m)); do \
> - $(INSTALL_PROG) $(STRIP_OPT) $$s "$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
> + for s in $(modules-m:.mo=$(DSOSUF)); do \
> + t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
> + $(INSTALL_PROG) $$s "$$t"; \
> + test -z "$(STRIP)" || $(STRIP) "$$t"; \
> done
> endif
> ifneq ($(HELPERS-y),)
> $(INSTALL_DIR) "$(DESTDIR)$(libexecdir)"
> - $(INSTALL_PROG) $(STRIP_OPT) $(HELPERS-y) "$(DESTDIR)$(libexecdir)"
> + $(INSTALL_PROG) $(HELPERS-y) "$(DESTDIR)$(libexecdir)"
> +ifneq ($(STRIP),)
> + $(STRIP) $(HELPERS-y:%="$(DESTDIR)$(libexecdir)/%")
> +endif
> endif
> ifneq ($(BLOBS),)
> set -e; for x in $(BLOBS); do \
> diff --git a/Makefile.target b/Makefile.target
> index 6d8fde8..8de8b12 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -196,7 +196,7 @@ install: all
> ifneq ($(PROGS),)
> $(INSTALL) -m 755 $(PROGS) "$(DESTDIR)$(bindir)"
> ifneq ($(STRIP),)
> - $(STRIP) $(patsubst %,"$(DESTDIR)$(bindir)/%",$(PROGS))
> + $(STRIP) $(PROGS:%="$(DESTDIR)$(bindir)/%")
> endif
> endif
> ifdef CONFIG_TRACE_SYSTEMTAP
> --
> 1.7.10.4
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-05-08 12:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-08 10:56 [Qemu-devel] [PATCH] Makefile: strip tools and modules too Michael Tokarev
2014-05-08 12:39 ` Fam Zheng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).